System Refresh of GRC 5.3 system

Hi Gurus,
Our client has putforth a requirement of refreshing the GRC 5.3 development system in our landscape with the data of GRC 5.3 production system. I could find document for Homogeneous System Copy for standalone Java engines in Service Marketplace. But, i was not able to find any document specific to GRC 5.3 system refresh.
Please guide me in providing help in the system copy procedure so that i can take the necessary precautions in doing the system refresh.
Regards,
Ragav

Hi,
I am not sure on the reasons for system refresh. Look at the below points:
1. The RAR data c(Rules, Functions, Risks etc) an be downloaded and uploaded in the Development environment. Why you need the production user data in Development?
2. The SPM users are intended for production. Why you are planning to copy/simulate them in development?
3. The ERM and CUPs are workflows, where the systems and other settings have to be created manually. What is your intention in getting them to development?
As per my knowledge, no system refresh is performed for GRC systems? May be you need to educate the client on these things. Please look for the ideas from the other experts too before you go back to your client.
Hope this helps!!
Warm Regards,
Raghu

Similar Messages

GRC-IDM initial load job not enriching one system's privs

Hi GRC Experts,
We have integrated IDM 7.1 and GRC 5.3 and tested provisioning to one target system in DEV; this worked perfectly; when testing a similar configuration in Quality, we were setting up the system, and had to run the IDM-GRC Initial Load job in order to enrich the imported privileges for use with GRC AC 5.3; in the Quality system, instead of just connecting to 1 target system, we have connected to 5 ABAP systemes, ECC, PI, POSDM, BW & SRM; for some strange reason when performing the GRC-IDM Initial load job 4 of the target system's privileges get enriched, while the ECC system's privileges aren't getting enriched; I would say through random sampling all ECC profiles are getting enriched but none of the ECC privileges are getting enriched; why could this be happening? we've tried running the ECC Initial Load job and then the GRC-IDM initial load job about 8-10 times but with no luck; the set of privileges we're investigating are still not enriched; we also ran the GRC CUP role load job, also selecting the option to over-write all existing roles in the system; via this method the CUP roles have been refreshed twice so far, but running the GRC-IDM initial load job even after refreshing the ECC system's privileges in CUP has had no effect whatsoever, all ECC privileges are still left to be enriched, but strangely enough the ECC Profiles have been enriched.
Any clues as to why this could be happening? We've checked and re-checked and there is no filtering or delta being applied to any of the passes, so it really makes no sense. Is there something we should be doing apart from what we've already done? Would greatly appreciate your help with this!
Thanks a lot in advance!
Best regards,
Sandeep

What you could do is simply add the attributes by a background job to the privileges. This works fine in most cases. You need to be sure that GRC knows the role and then it is fine. The load only adds those 2 privileges and does nothing of any deeper complexity.
MX_AC_ROLEID = <rolename>
MX_APPLICATION_ID = <system name>

"Refresh" of development Access Enforcer system

Greetings!
Our Access Enforcer system is now in production. Our development system is quite a mess, with old requests and configuration. We would like to make the dev system look more like the production and test systems and get rid of all of the old requests, initiators, stages, etc. Does anyone know how to clean up AE so we can start over with a clean slate? We are on 5.2 with SP3, running on an AIX box with Netweaver only.
Thanks!

Hi,
I am not sure on the reasons for system refresh. Look at the below points:
1. The RAR data c(Rules, Functions, Risks etc) an be downloaded and uploaded in the Development environment. Why you need the production user data in Development?
2. The SPM users are intended for production. Why you are planning to copy/simulate them in development?
3. The ERM and CUPs are workflows, where the systems and other settings have to be created manually. What is your intention in getting them to development?
As per my knowledge, no system refresh is performed for GRC systems? May be you need to educate the client on these things. Please look for the ideas from the other experts too before you go back to your client.
Hope this helps!!
Warm Regards,
Raghu

Same EPM Excel Report takes time to open and refresh on 1 system while it opens and refreshes faster on other system

Hi All ,
I am facing an issue where the EPM Excel Templates on SERVER ROOT FOLDER take time to open on 1 system . It also takes great amount of time to REFRESH . While on an another system the same Report opens rather quickly and refreshes also quickly .
Regards,
SHUBHAM

Hi Shubham,
Now day excel problems are due to some MS update. Not sure but have a look at below note.
2107965 - Issues in EPM Add-in after installing Microsoft updates

What is the deal with System Reset/Refresh in Windows 8.1?

Either this is a serious defect with the Windows Store-provided update for Windows 8.1 or Microsoft has done this intentionally but doing an update to Windows 8.1 from the Windows Store-provided service nukes your ability to use System Reset/Refresh.
It claims files are missing which means that the update erased the necessary reset files from the HDD but didn't replace them during the update with Windows 8.1 compatible equivalents.
I had to do a System Reset on one of my computers and I ended up having to get a Windows 8.1 ISO from a less than reputable source just to get my hands around the necessary missing file and now I can't even activate it with my Windows 8 Pro upgrade
key. None of this would have been a problem if I could just perform the System Reset in place on Windows 8.1 and reset it back to a neutral, clean Windows 8.1 installation.
I've since managed to find a way to do the install the way I needed to but can someone please give me some clarity on this subject so I don't have to go through all this again (as I've got two other computers that run a Windows Store-updated Windows 8.1
installation and at least one of them is probably due for its own System Refresh)? What can I do to refresh a valid Windows 8.1 installation if I need to?
EDIT: Oh, and one more thing: one of those computers is an OEM-installed Windows 8 copy that was subsequently upgraded to 8.1 yet it too suffers from the "missing files" error when a System Refresh/Reset is requested. What
am I supposed to do here if I want to do a System Refresh to this computer? Will the OEM key inside it activate if I go outside the operating system to install it anew?

C:\Program Files (x86)\NeoSmart Technologies\EasyBCD\bin>net start sppsvc
The Software Protection service is starting.
The Software Protection service could not be started.
A system error has occurred.
System error 5 has occurred.
Access is denied.
This is the error from running net start sppsvc in an elevated command prompt. Software Protection Service (sppsvc.exe) is getting an "access denied" error and code 0xC0000022. Ok, let me break it down for you... And this is with a fully
legit VL key that works on several PC in our school that are
First, you perform a System Refresh for what ever reason. After the Refresh, within a few minutes get the Windows version watermark in the lower left corner of your desktop that shows the windows version and build. Then after that
you get another watermark above the first watermark that says you need to activate by going to **Change PC Settings***. From there you are on the activation screen and its state with out doing anything...**Activation Error Description Not Found.**
When you click "Activate Now" nothing happens. You briefly see "checking this key" and then nothing.
This is where the above mentioned Software Protection service is failing. <--- Needs to be fixed.
Now at this point I cannot attempt to do an online activation because the sppsvc.exe is producing the 0xC0000022 error
I cannot do a phone activation because there is no installation ID...all the boxes are blank...because the sppsvc.exe is producing the 0xC0000022 error.
Oh, and I cannot re-type my product key because...you got it...because the sppsvc.exe is producing the 0xC0000022 error.....
The Software Protection service runs when I activate my PCs that are getting a "Clean" installs, Just to test the theory I did a refresh install on the "clean" installed pc and **VOILA** SAME ERROR....
Let me clarify that one of the PCs has a dual partition and a complete re-install of the OS will mean some extensive work fixing the bootloader as well. I have 150 PCs to refresh and this is what happened on the first one, then the 2nd. I am
running these on a TechNet VL and have never had these issues in the last 3 years.
Listen to these people. ALL are having the same issue. There has to be a process to fix it. As difficult as it may seem, some of us don't mind spending a few extra minutes running administrative tasks to fix this instead of re-installing.
That's the novice way to fix the issues and the most painstaking for those of us who work 12-to 14 hrs a day and don't have the time. We need this fixed. PLEASE PLEASE
Pretty please. Please take the time to take ownership of this issue and pioneer a real fix for the hundreds maybe thousands that are having or have had (broke down and did a "clean" install) this EXACT issue. Thank you so much for your help!!!!!

Refresh data in a system form

Hi all,
i have the following scenario:
i developed an addon to enable the user to modify the invoice billing address after the invoice has been created.
to achieve it i used a UDF with a text edit field.
everythings seems to works fine but i'd like to refresh the system invoice form (form 133 - item 6) with the new value submited in the UDF when i go back to the main form.
i already tried to use refresh and update form method without success.
can someone help me?
thanks in advance.
best regards
Andrea

something like
Dim oform As SAPbouiCOM.Form
            Dim docnum As String
            Dim edit As SAPbouiCOM.EditText
            oform = SBO_Application.Forms.ActiveForm
            edit = oform.Items.Item("8")
            docnum = edit.Value
            SBO_Application.Menus.Item("1281").Activate()
            edit.Value = docnum
            oform.Items.Item("1").Click(SAPbouiCOM.BoCellClickType.ct_Regular)

Unable to login in EP 6.0 after system refresh

After performing the system refresh of EP 6.0, completed the post system copy steps.
Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page.
please help me what could be the reason.

Hi Abdul.
I think you have selected the Algorithm as RSA, which is the default one. 
Please change it to DSA and hope the issue will be solved.
Regards,
Satish

SSO between EP and GRC systems

Hi,
We have EP 7.0 and GRC 5.3 systems in our landscape. In the login page of the portal, we have a link configured to the GRC system to use the Compliant User Provisioning application.
On clicking the GRC link for accessing CUP, the user is prompted to enter the username and password to login to the GRC system. In our landscape both the EP and GRC systems have the ECC ABAP system as the UME and hence the user credentials are exactly the same for both EP and GRC systems for a particular user.
I would like to avoid another logon for the user in GRC as he has already logged in with the same user credentials in EP system.This, i believe is achieved through SSO but i'm not sure about configuring SSO between two Java systems.
Please help me in the configuration.
Regards,
Ragav

Ragav_ss wrote:
Everything is working fine when i click User Logon link in GRC system which comes up through the link from EP. The SSO is working fine there. But when i click Request Access or Request Status link, the SSO does not work.
Any clues.
GRC version is 5.3 SP 12
Did you ever get that resolved? I'm having the same problem with 5.3 SP 15.
Regards,
Sean

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

How to Refresh System Form in Run Time

Dear All,
Please give me idea for Refresh System Document in Run Time using DI,basically I am using system columns for update for some scenarios.
So please give solution that how should refresh system form.
Thanks a lot.
Ashish Singh.

Hi,
Please post above discussion in SDK forum.
Thanks & Regards,
Nagarajan

Error During importing Request to a New Refreshed BI System

Dear Experts,
we have refreshed the Development BI system ( DB0 ) with DB1 which is
our New development system for Release 2 on Nov 5th ,2007. The
additional transports which went successfully to production till date
should to be manually moved to DB1.Some of the transports which are
involved ODS are getting failed with the below Error.
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
Activation of Objects with Type DataStore Object
Checking Objects with Type DataStore Object
Checking DataStore Object ZOTCODF3
DataStore object ZOTCODF3 is consistent
Saving Objects with Type DataStore Object
Internal Activation (DataStore Object )
Preprocessing / Creation of DDIC Objects for DataStore Object ZOTCODF3
Database table /BIC/AZOTCODF340 was deleted
Table/view /BIC/AZOTCODF300 (type 0) from DataStore object ZOTCODF3 saved
Creation/deletion of indexes for active table
Table/view /BIC/AZOTCODF340 (type 4) from DataStore object ZOTCODF3 saved
Table type /BIC/WAZOTCODF300 saved
Table/view /BIC/VZOTCODF32 (type VIEW) from DataStore object ZOTCODF3 saved
Change log for DataStore object "ZOTCODF3" saved successfully
Activate all Dictionary objects ( 5 ):
All DDIC objects have been activated / deleted
Post Processing/Checking the Activation for DataStore Object ZOTCODF3
Creating Export DataSource and dependent Objects
The creation of the export DataSource failedReading the Metadata of ZOTCODF3 ...
Creating DataSource 8ZOTCODF3 ...
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)Error when creating the export DataSource and dependent ObjectsCompare active / modified versions for DataStore object &2
Update/activation program for DataStore object ZOTCODF3 is being regenerated
Error when activating DataStore Object ZOTCODF3
Resetting of Incorrect Objects Back to the Active Version (DataStore Object )
Preprocessing / Creation of DDIC Objects for DataStore Object ZOTCODF3
Database table /BIC/AZOTCODF340 was deleted
Table/view /BIC/AZOTCODF300 (type 0) from DataStore object ZOTCODF3 saved
Creation/deletion of indexes for active table
Table/view /BIC/AZOTCODF340 (type 4) from DataStore object ZOTCODF3 saved
Table type /BIC/WAZOTCODF300 saved
Table/view /BIC/VZOTCODF32 (type VIEW) from DataStore object ZOTCODF3 saved
Versioning not possible for PSA 8ZOTCODF3_CA
Error while saving change log for DataStore object ZOTCODF3
When i tried to reimport, DDIC is getting locked.we havent changed DDIC
password as we confirmed logging with the password we have.
we are on Stack 11. Please help us in resolving the issue at the
earliest.
Regards
Ravi Patneedi
+44-1214248271
+44-7889172169

Hi,
Ask Basis people, to check myself datamart RFC login through SM59 via background user(ALEREMOTE). Issue related with Initial password .
Regards,
Saran

System copy post DB refresh error

Hi,
I am doing a post db refresh (Oracle/Solaris) and while creating control file getting error
SQL> CREATE CONTROLFILE SET DATABASE "XXX" RESETLOGS ARCHIVELOG;
CREATE CONTROLFILE SET DATABASE "XXX" RESETLOGS ARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file '?/dbs/[email protected]'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ALSO
SQL> startup nomount
ORACLE instance started.
Total System Global Area 2214592512 bytes
Fixed Size                  2053640 bytes
Variable Size            1174407672 bytes
Database Buffers         1006632960 bytes
Redo Buffers               31498240 bytes
SQL> @control.sql
SP2-0310: unable to open file "control.sql"
Please help.

Hi Anshul,
First please refer System copy guide for successful procedure http://www.basisconsultant.com/j/index.php?option=com_k2&view=item&layout=item&id=1&Itemid=185 .In addition please follow SAP Note 546006 - Problems with Oracle due to operating system errors
and try to execute SQL command create spfile from pfile ; ( ORA-01565: error in identifying file &#8216;?/dbs/[email protected] )
Regards,
Gaurav

Error occured while refreshing webi report in bi system

Dear Experts ,
please look into my problem
While refreshing WebI report in BIDEV system, we are getting the following error. The problem occurs only while refreshing the report.
ERROR: a database error occured. the database error text is unable to connect to sap bw server incomplete logon data.. (wis10901)
Regards

HI ayur
In the universe connection if the username and password is hardcoded then make sure those username and passwords are correct.
else
Make sure you are in the right BOX, for example if Universe is pointed to Prod, and you execute the report associated with that universe in the Dev, then that error will show up. So in universe connection find out to what BOX(dev, test, prod) it is pointed to and login to webI in the same BOX as universe pointed to and execute the report.
It should work, if not please let us know.

System error when I refresh a query/WB

Hi All,
When I refresh a query/workbook getting following error message and can not proceed further..
Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01
We are using BW 3.5 and BEX reports.
I'd appreciate if you could help me on this
Thanks
BI Consultant

What variables are you using in your query? This error essentially occurs when the variable values are not correctly transferred resulting in a high volume data selection. Do you have any mandatory variables in the query? Are they getting filled the first tiem round?

SAP is not coming up after system refresh with Export/Import option

Hi,
I have exported Java 6.40 and finished the refresh successfully. And I imported the Java successfully. After importing Java, I restarted SAP but is not coming up. When I checked the dev_w0 trace file, I got the following information.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Aug 05 10:48:17 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\IDS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno 00
M sid IDS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 247
M intno 20020600
M make: multithreaded, Unicode
M pid 844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 844) [dpxxdisp.c 1170]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 20328 (1452)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05FE0040, size: 3391480)
M DpShMCreate: allocated sys_adm at 05FE0040
M DpShMCreate: allocated wp_adm at 05FE1B88
M DpShMCreate: allocated tm_adm_list at 05FE6AF0
M DpShMCreate: allocated tm_adm at 05FE6B18
M DpShMCreate: allocated wp_ca_adm at 062BB970
M DpShMCreate: allocated appc_ca_adm at 062C1730
M DpShMCreate: allocated comm_adm_list at 062C3670
M DpShMCreate: allocated comm_adm at 062C3688
M DpShMCreate: allocated vmc_adm_list at 0630A358
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0630A380
M DpShMCreate: allocated wall_adm at 0630A388
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 05 10:48:18 2009
M calling db_connect ...
C Prepending e:\oracle\IDS to Path.
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPIDS's password
C Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05B17398 05B1C458 05B1BEC0
C Attaching to DB Server IDS (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84)
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11395]
C Try to connect with default password
C Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05B17398 05B1C458 05B1BEC0
C Starting user session (con_hdl=0,svchp=05B1BE14,srvhp=05B1CA84,usrhp=05B256B8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11395]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1283]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9708]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ord-sapproj_IDS_00 on host ord-sapproj (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Aug 05 10:48:18 2009
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9893
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 844) [dpnttool.c 357]
I have checked database connectivity with the command 'r3trans -d', it got finished with the return code 0012 and the trace.log file is showing the following information.
=======================================
4 ETW000 r3trans version 6.13 (release 640 - 17.07.08 - 08:11:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 05.08.2009 - 10:52:31
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Aug 05 10:52:34 2009 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 8449 0.008449
4 ETW000 [dev trc ,00000] using "f:\usr\sap\IDS\SYS\exe\run\dboraslib.dll"
4 ETW000 37 0.008486
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 18 0.008504
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 27 0.008531
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.220)
4 ETW000 219 0.008750
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 27 0.008777
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 36 0.008813
4 ETW000 [dev trc ,00000] New connection 0 created 26 0.008839
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 34 0.008873
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 22 0.008895
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 25 0.008920
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.008952
4 ETW000 [dev trc ,00000] Setting DIR_CLIENT_ORAHOME is not set as environment variable,
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 227 0.009179
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 130 0.009309
4 ETW000 [dev trc ,00000] got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
4 ETW000 32 0.009341
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 23827 0.033168
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPIDS's password 34 0.033202
4 ETW000 [dev trc ,00000] Connecting as /@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000 35 0.033237
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 32 0.033269
4 ETW000 [dev trc ,00000] 0 UTF8 1 0253CDB0 02541E18 02541880
4 ETW000 112 0.033381
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 29 0.033410
4 ETW000 [dev trc ,00000] Allocating server context handle 25 0.033435
4 ETW000 [dev trc ,00000] Attaching to DB Server IDS (con_hdl=0,svchp=025417D4,srvhp=025423DC)
4 ETW000 51 0.033486
4 ETW000 [dev trc ,00000] Assigning server context 025423DC to service context 025417D4
4 ETW000 41860 0.075346
4 ETW000 [dev trc ,00000] Allocating user session handle 47 0.075393
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000 50 0.075443
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 4381 0.079824
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 31 0.079855
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 23 0.079878
4 ETW000 [dev trc ,00000] Try to connect with default password 80 0.079958
4 ETW000 [dev trc ,00000] Connecting as SAPIDS/<pwd>@IDS on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
4 ETW000 28 0.079986
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 31 0.080017
4 ETW000 [dev trc ,00000] 0 UTF8 1 0253CDB0 02541E18 02541880
4 ETW000 32 0.080049
4 ETW000 [dev trc ,00000] Assigning username to user session 0254AFA8 19 0.080068
4 ETW000 [dev trc ,00000] Assigning password to user session 0254AFA8 25 0.080093
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=025417D4,srvhp=025423DC,usrhp=0254AFA8)
4 ETW000 32 0.080125
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 1691 0.081816
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 28 0.081844
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 18 0.081862
4 ETW000 [dblink ,00428] ***LOG BY2=>sql error 1017 performing CON [dblink#3 @ 428]
4 ETW000 119 0.081981
4 ETW000 [dblink ,00428] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 428]
4 ETW000 30 0.082011
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'IDS'"
=================================================================================
Kindly suggest me the solution to resolve the issue.
Thanks & regards,
Mogileeswar

Please check the logs it is clrerly mentioned thet your sapsystem is not able to connect to database.
ERROR => CONNECT failed with sql error '1017' [dbsloci.c 11395] B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ] B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ] B ***LOG BY0=> ORA-01017: invalid username/password
Check the Note------Note 713685 - Hom./Het.System Copy SAP Web AS 6.40
run these commands:
brconnect -u / -c -l E -f chpass -o SAPSR3 -password whatever_you_want
sqlplus /nolog @sapdba_role.sql SID NT
Also check the parameter DBS_ORA_SCHEMA is set to SAPSR3.
Also read note 400241.
Thanks
Rishi Abrol

System Refresh of GRC 5.3 system

Similar Messages

Maybe you are looking for