System Refresh: Running SE09 after system copy

Hi,
After system reresh we run SE09 and delete TMS configuration of the source system as it has came to destination after database restore.
My question is is there any specific reason that we do it in SE09 only because otherwise we can simply configure TMS using STMS.
Regards
Shubham

Hello Shubham
Its SE06 not SE09 where you do this.
When you do go to SE06 and click on post activity button it basically deletes the association of source SID and attaches the target SID.
It also ensures there are no other system in that SAP Landscape with same SID.
Kindly refer to this link which gives some more information on this.
http://help.sap.com/saphelp_40b/helpdata/pt/57/38de814eb711d182bf0000e829fbfe/content.htm
Regards
Vivek

Similar Messages

How to Recover a running composites after system crash?

The Weblogic server has unexpected restart while some long-time composites were running.
After Weblogic started again, those composites had state "Running". But nothing changes. They never neither finish neither fault.
Is there a something necessary to configure in weblogic, or composites to successfully continue all running composites after system start-up after a crash?

Hi there,
please have a look at http://download.oracle.com/docs/cd/E15586_01/integration.1111/e10226/bp_mang.htm#BABCEIBC.
In section "13.4 Performing BPEL Process Service Engine Message Recovery" you can read how a manual recovery of undelivered invoke or callback messages due to a transaction rollback in the process instance can be performed. Please have a look an let me know if it helpful for you.
Best regards,
Danilo

System Refresh getting error "Your System has corresponding JAVA stack"

Hello Experts,
I am trying to do a system refresh on my HCM system which is ABAP only.
When I run SWPM --> Generic Installation Options -->MS SQL Server --> Database Tools --> Database copy completion, I get the following error.
Version Information is as follows:
Kernal is 721
ECC 6.0 Basis 702 level 9 (Netweaver 7.02)
Windows server is 2008 R2 standard
MSSQL is 10.50.4000
Yes, I have done my research and failed also has a High OSS message open with SAP. This issue is very critical so any help as early as possible is highly appreciated.
Thank You.

Hi Muhammad,
It looks like you have a Java schema in your database, and sapinst is finding that and therefore assuming it's a double-stack system. Perhaps this system used to be double-stack at one time, and then was split? In the trace file I saw the following entries, at different points:
SID: HCT
DbServer: USALSQLT01\HCMT
DbName: HCT
ABAP Schema: hct
Java Schema: SAPHCTDB
TRACE      2014-04-18 09:26:36.318
Found corresponding java schema SAPHCPDB. Aborting.
TRACE      2014-04-18 09:26:36.333 [iaxxgenimp.cpp:325]
           CGuiEngineImp::showDialogCalledByJs()
showing dlg d_doubleStackSystemError
TRACE      2014-04-18 09:26:36.333 [iaxxgenimp.cpp:335]
           CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_doubleStackSystemError">
<title>Unsupported System</title>
<dialog/>
So, that seems to be the cause. If you're sure this is only supposed to be a single-stack ABAP system, you might try deleting the SAPHCPDB schema using database tools and then re-running sapinst.
While you're at it, it looks like you might have an old copy of Sun JRE 1.4.2 still installed (perhaps from the old days when that version was required to run sapinst). In the environment variables in the trace I saw:
JAVA_HOME=C:\j2sdk1.4.2_29-x64
You might want to uninstall that if you don't need it anymore, and unset that environment variable. Also, your swap size looks low for a 64-bit system with 8 GB RAM, even for a test system:
Swap size (MB): 9998.18
Best regards,
Matt

Change Myself system in RSA1 trx after client copy

Hi,
I have installed SCM 2007 system.
As post-processing step i have configured myself system in RSA1 trx in the 001 client.
Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
Please help.
Regards,
Chintan

HI,
As logical systems are used to define you can use BDLS to convert them after client copy.
Go through :Note 325470,325525.
Thanks.

Computer runs slow after system update

I just did the recent (last week) system update to 10.8.3 and now everything works super slowly, like stuck in mud. Help.
Thanks.

You have adequate free hard drive space but keep an eye on it.
But I do use quite a bit of memory on my itunes, about 5GB.
How did you determine this?
If you read the link I provided carefully, OS X makes automatic/dynamic use of Paging or Virtual Memory regardless the amount of RAM installed which uses available free hard drive space when utilized. This is released when logging out of your account and after a shutdown and/or a restart.
The less RAM you have installed, the more Paging or Virtual Memory will be used depending on the number of running applications at a time and what each application is performing. This can make the system feel and operate more slowly.
Check Resolving Disk, Permission, and Cache Corruption for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided.

Data loads running even after system is down?

All,
I have a data load from crm system to BI system currently loading to PSA. while the data load was in process the BI system or server went down for recycling yet the loads are running. Is this becasue the loads are upto the PSA. So to get my basics right, are PSA tables on the source system - I had the knowledge that they have same structures as that of souce system but lie on the BI system
Inputs appreciated.
Thanks!

Hi,
You please check that job names in R3 system and find those are active or not.....if those are active then job is running...if they are not active or canled,,,then you please change the QM status for that loads and re run the infopack..it will work
Regards
Srinivas

Qosmio G20-156 running slowly after system restore

please help since my son crashed my pc and i restored it with the cd that came with the machine im having problems with screensaver running slowly and some programs running slowly like nero vision which was fine before. i tried all the usual stuff like lowering graphics acceleration but no joy please help
e-mail me at [email protected]
my machine is a qosmio g20-156 pqg21e

Hi
The screensaver is running slowly??? I dont know what you mean but possibly some pictures or anything moves slowly. So I dont think that this has something to do with the hardware but more with the screensaver settings as suggested above.
The Qosmio is a very powerful notebook and a application such screensaver cannot be a problem.
But Silas gives you a very nice advice. Check the background processes and disable not necessary applications which starts at the beginning

Post System Refresh Activity - BDLS run

Hi,
We have finished system refresh of a QA system from Production. We need to run BDLS now to convert the original Production logical systems to QA relevant logical systems.
I am short of understanding of this process. Can anyone please help me with the concept and process?
Thanks in advance,
Abdul

Hi Abdul Rahim Shaik,
BDLS will convert the logical system name for your PROD to QAS.
For eg:
Your source - PRDCLNT100
Your target - QASCLNT100
If you go to SCC4 in your QAS, u will see Prod logical system name for the client.
Once you run BDLS after system copy, logical system name exist in every table for PRDCLNT 100 will change to QASCLNT100.
Refer to below link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm
Cheers,
Nicholas Chang

Large numbers of workflows appearing in SAP Inbox after system refresh

Hi all,
We are having an odd issue where after we perform a system refresh of our PR system to QA, a massive number of Business 23,000+ appear in the SAP Inbox of certain users who are registered as agents.
We understand how to delete the workflows but want to understand the process of why they keep appearing, and whether this is a system error or a symptom of a user/batch process during or after the refresh. The workflows do NOT appear for these users in the PR system.
95% of the notifications are flagged "Error when generating IDoc from MC Document."
I have been reviewing the Workflow wiki but have yet to find anything pertinent yet.
http://wiki.sdn.sap.com/wiki/display/HOME/3.Administrationand+Troubleshooting
Any help with this or applicable SAP Notes would be greatly appreciated.
Thanks!
Edited by: Ben Daniels on Dec 6, 2010 11:21 AM

Hi,
As the error message, those workitems are generated when system trying to generate IDocs.
And the reasons why all workitems are sent to all users is, the task is marked as general task.
What i would suggest is, select any of those workitem, go to its workflow log & analyze which workflow generates these workitems in what case and proceed accordingly.
Regards,
Raj

Sender File Comm Channel Fails after system refresh

Hi,
we did a system refresh of our PI system and since then the sender file communication channels donot work with the following exception:
Error: com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.
I have seen many threads in this forum related to this issue but couldn't find a proper solution.
Any help is very much appreciated.
Thanks
MLS

You may do the following:
1. Perform SLDCHECK on XI.
2. Check if XIAFUSER is not locked or its password has been changed recently.
3. Goto SLD-> Business sytems-> Integration server, check Pipeline URL. It should be
http://hostname:8000/sap/xi/engine?type=entry
Regards,
Prateek

System Refresh Precautions?

Hi,
During system refresh, are all types of data - master data, transaction data as well as <b>customising data</b> get refreshed from prouduction environment?
Could you please suggest what is best way to get back project specific new customising data on a refreshed environment? Is there some sap recommended best practice on this.
regards,
Karthik

Hi Please go through. This will give you exhaustive information. After refresh we used this to get back the required system specific customizations.
     Refresh from PR1 to QA1
1.     Before the copy
     Note down customer key, Installation number and license key - Done
     LICENSE system: QA1
     Customer key: L1985917776
     Expiration_date: 99991231
     Installation no: 0020065063
     Key: GKRZ25H353129JYX8HCJRS13
     Productid: R3_ORA
license useable ***
(directory: \usr\sap\QA1\SYS\exe\run)
(run command: saplicense show)
Team Involved: SAPDBA
     Download RFC tables - To be done
Tables rfcattrib, rfcdes and rfcdoc have been exported using sapdba on QA1 and the corresponding files are kept in a new temporary directory: /oracle/QA1/rfc_dest. After the system copy, these files have to be moved from /oracle/QA1/rfc_dest to /oracle/QA1/sapreorg and then the tables can be imported into QA1, to revert back to the RFC destination information as it is now.
Steps : 1)login with oraqa1
           2) type sapdba
           3) select e - Export/import
Perform this step two days before the scheduled refresh.
Team Involved: SAPDBA
     Backup user master records in QA1 - To be done
Procedure : login to QA1 400.
Execute Transaction code: SCC8 (CLIENT EXPORT)
Selected profile: SAP_USER
Target system: QA1/DV1(safety backup)
Perform this step two days before the scheduled refresh.
Team Involved: SAPDBA
     Compare filesystem spaces - Done
Team Involved: SAPDBA
     Compare transports To be done
Team Involved: SAPDBA
     OPERATION MODES(RZ04) Done
Existing QA1 operation modes.
Team Involved: SAPDBA
     Successful backup of PR1 To be done
A successful offline backup has been scheduled on *** and that backup will be restored on to QA1 by the Unix team.
Team Involved: USTO
     System messages/E-mails To be done
SM02- CREATE A TEST MESSAGE IN PR1
Two days before the scheduled refresh perform this step.
Team Involved: SAPDBA
     Delete the existing datafiles on QA1 To be done
Login as qa1adm and execute stopsap
Login as oraqa1 and execute:
lsnrctl stop
rm rf sapdata?/*
Team Involved: SAPDBA
2.     The copy To be done
Copy all the datafiles from /oracle/PR1/sapdata? To /oracle/QA1/sapdata?
Owner, group and permissions of the new files/directories to be maintained as before
Copy Command: rcp p /oracle/PR1/sapdata*   Sierra: /oracle/QA1/sapdata*
(NOTE: If errors occur when restoring/copying the sapdata on the target system, the complete restore/copying has to be repeated.)
Team Involved: UNIX FOF/USTO
3.     After the copy To be done
     Creating the control file on PR1 To be Done
Login as pr1adm and execute the following in svrmgrl
connect internal
alter database backup controlfile to trace;
exit
FILE created under the following Location: \ORACLE\PR1\saptrace\usertrace\ <pr1_ora_xxxx>.trc chose the latest run
ftp the file onto desktop
Team Involved: SAPDBA
     Edit the control file To be done
Here is the edited control file:
Team Involved: SAPDBA
     Creating the control file on QA1 - To be done
Login as oraqa1 ftp the file to /oracle/QA1 and execute the following in svrmgrl
connect internal
@control.sql
alter database open resetlogs;
lsnrctl start
exit
Login as qa1adm and execute startsap
Team Involved: SAPDBA
     Post system copy activities
     License installation - to be done
Login with user qa1adm
Goto /usr/sap/QA1/SYS/exe/run
command: saplicense install
     Installation check (Transaction SICK)
     SE06 > Database Copy or Migration > Post Installation Processing
     Delete entries from tables: DBSTATHORA, DBSTAIHORA, DBSTATIORA, DBSTATTORA, MONI, PAHI, OSMON, DBSNP, SDBAH, SDBAD, SDBAP, SDBAR, DDLOG, TPFET, TLOCK and TPFHT
     Initial SAP consistency check (Transaction SM28)
     Database consistency check (Transaction DB02)
     Server check (Transaction SM51)
     TMS configuration
      Logon to the SAP R/3 System and goto TCODE SE06. Select "Database Copy or Migration" and execute "Post Installation Processing".
      Delete old TMS configuration and make new configuration for TMS via STMS TCODE.
     Logical system set-up and BDLS
Delete logical system for client 400 after system refresh and create new logicalsystem and assigned to client 400.
After refresh: LOGSYS400(logical system for client 400)
Delete this logical system and create new logical system
New logical system: QA1CLNT400 (logical system same before refresh in QA1)
     ITS and Bugseye settings
     RFC destinations as per Appendix (import the exported tables and then delete the temporary directory /oracle/QA1/rfc_dest)
     Logon load balancing(Transaction SMLG)
     Instance profiles
Import profiles from active servers using RZ10
Save and Activate instance profile. And restart the sap services.
     CCMS configuration
     Housekeeping jobs
     Background jobs(daily jobs)
     Application jobs
     Printer/spool/TemSe set-up
     User administration
    The transports are imported implicitly in post processing with transaction
SCC7.
     Transport sequence number set-up
     Mass transport and Support package/patch application.
Re-import transports to QA1 from DV1 which are not available in PR1.
     Manual configuration
     Create the rest of the clients:
o     400     UAT/OAT Live Copy
New client 340 to be created with the following settings.
Source client: 400
Target client :340
Profile: SAP_UCSV
COPY MODE: local copy
Team Involved: SAPDBA

BDLS in system refresh

HI all
I did a system refresh of BI .After running BDLS the logs in BDLS shows success. But logical systems are not getting converted.When I checked in SLG1it shows no coversion has taken place. Can any one help me to proceed further and change my logical system
Regards
-aj_

> Oh ok thanks but this was already done. what I mean to tell is If I run BDSL it is showing successful .When I check BDLS logs in SLG1 it is showing error. WHy this happens and what can be done?
Without knowing the error that you see how should we help you?
Markus

System refresh of Prod onto DEV in ECC5.0

Hi,
Can i have steps to perform a system refresh in ECC5.0. on AIX5.0 and Oracle 9i. Kindly send me the details steps of Pre and Post Installs that need to be done.
With Regards
Naresh

SAP Client Copy / System Refresh
Before doing a client copy, you need to prepare the following :-
1. Find the source client space with the client size custom program which can be implemented using the rel. note:
    Find the space of the client - '0118823'. This will give you the size of the source client.
2. If your are on Unix OS, adjust all the file systems according to PRD file system to fit the PRD client in DEV
    client based on space requirements also.
3. You can do the client copy by remote or export/import client.
    Remote method is not preferred if you are doing a large client copy.
    Do a client export/import.
4. To speed up the export/import, use R3trans export/import for the clustered tables.
    Please find the rel. notes related to performance improvements for cluster tables in OSS.
5. Do import and post processing.
    Note: Export may take 10 to 20 hr. for 50gb of data
    import may take 4 days and post import will take 8 to 15 hr. for 50gb of data. And it all depends on
    your system performance.
Please refer OSS rel. notes for the few RZ10 parameters which needs to be set for cluster tables to speed up the process.
Note :-
If it is a fresh installation, do this --
1. SCC4 --> Create client no. and fill other details.
2. Logon to the newly created client with SAP* and PASS as password.
3. SCCL --> choose any profile (preferably SAP_ALL), source client 000 and target client <as created just now>.
4. Preferably do a test run initially to check if it can go well.
5. As a care check space in databases.
if helpful reward points are appreciated

Read sharing violation after System.exit in oracle lite DLL

I am using JRE 1.3 and successfully managed running some sql statements over jdbc.
When the java class is finished (implicit exit) then no error appears.
When I exit the code using System.exit(0) there is a windows dialog
showing a read access error AFTER the java class finished.
probably there is some cleanup the oracle DLL wants to do after the JVM exited?
Please help mailto:[email protected]
The sample code below can be used.
* Title:
* Description:
* Copyright: Copyright (c) 2001
* Company:
* @author Ivan Motsch
* @version 1.0
import java.util.*;
import java.io.*;
import java.sql.*;
public class TestOracleLite{
public TestOracleLite(){
     public void start(){
          Statement stm=null;
          Connection conn=null;
          try{
               Properties p=new Properties();
               p.setProperty("user","system");
               p.setProperty("password","manager");
               p.setProperty("DataDirectory","..\\..\\..\\TEMP\\ora4\\db");
               p.setProperty("Database","ORS");
               p.setProperty("IsolationLevel","Read Committed");
               p.setProperty("Autocommit","Off");
               p.setProperty("CursorType","Forward Only");
               String ps=getPropertiesAsString(p);
          Class.forName("oracle.lite.poljdbc.POLJDBCDriver");
               conn=DriverManager.getConnection("jdbc:polite:whatever"+ps);
               execSql(conn,
                    "drop table test1 cascade"
               execSql(conn,
                    "create table test1(pk number(32),ncol number(32),scol varchar2(2000),dcol date,rcol long raw)"
               conn.commit();
               execSql(conn,
                    "insert into test1(pk,ncol,scol,dcol,rcol) values(?,?,?,?,?)",
                    new Object[]{new Integer(1),new Integer(1111),"Test Text",new java.sql.Date(System.currentTimeMillis()),new byte[]{0,1,2,3,4,5,6,7,8,9,10}}
               conn.commit();
               readSql(conn,"select * from test1");
          catch(Exception e){
          e.printStackTrace();
          finally{
               if(conn!=null){
                    try{
                    conn.close();
                         conn=null;
                    catch(Exception e){e.printStackTrace();}
     private static String getPropertiesAsString(Properties p){
          StringBuffer buf=new StringBuffer();
     for(Iterator it=p.keySet().iterator();it.hasNext();){
          String key=(String)it.next();
               String val=p.getProperty(key);
               buf.append(";"+key+"="+val);
          return buf.toString();
     public boolean execSql(Connection conn,String s){
          return execSql(conn,s,(Collection)null);
     public boolean execSql(Connection conn,String s,Object[] binds){
          ArrayList list=new ArrayList();
          if(binds!=null) list.addAll(Arrays.asList(binds));
     return execSql(conn,s,list);
     public boolean execSql(Connection conn,String text,Collection binds){
          PreparedStatement stm=null;
          try{
               stm=conn.prepareStatement(text);
               if(binds!=null){
                    int i=1;
                    for(Iterator it=binds.iterator();it.hasNext();){
                         Object o=it.next();
                         if(o==null){
                              stm.setNull(i,Types.VARCHAR);
                         else if(o instanceof byte[]){
                              stm.setBytes(i,(byte[])o);
                         else{
                              stm.setObject(i,o);
                         i++;
               boolean b=stm.execute();
               System.out.println("status: "+(b?"ok":"failed"));
               return b;
          catch(SQLException e){
               System.out.println("status: "+"error"+" "+e);
               return false;
          finally{
               if(stm!=null) try{stm.close();}catch(Exception e){}
     public boolean readSql(Connection conn,String text){
          PreparedStatement stm=null;
          try{
               stm=conn.prepareStatement(text);
               ResultSet rs=stm.executeQuery();
               ResultSetMetaData meta=rs.getMetaData();
               System.out.print("col: ");
               for(int i=1,n=meta.getColumnCount();i<=n;i++){
                    System.out.print(""+meta.getColumnName(i)+", ");
               System.out.println();
               while(rs.next()){
                    System.out.print("row: ");
               for(int i=1,n=meta.getColumnCount();i<=n;i++){
                         System.out.print(""+rs.getObject(i)+", ");
                    System.out.println();
               return true;
          catch(SQLException e){
               System.out.println("status: "+"error"+" "+e);
               return false;
          finally{
               if(stm!=null) try{stm.close();}catch(Exception e){}
     static public void main(String[] args) {
          TestOracleLite t=new TestOracleLite();
          t.start();
          t=null;
          System.exit(0);

Hi
After system copy you need to do post system copy activities...
Please follow according to the installation Guide..
for example: your sld connection of your new system will be pointing to your source system. So you need to go to VA where in you can find SLD Data Supplier and change the host name, port no relavent to this i.e. your destination system...i.e.
new system.. In the same way you can follow doing the post installation activites will solve your issue.
Regards
Hari

System Refresh activity

Does any body have a clear explanation for the system refresh activity.
and is System copy and refresh one and the same
if some one has steps please send them to me
thank u

Pavan ,
when you are performing the client copy you are coping the tables and indexes.
if your system have different patch level i way cause inconsistancy while client copy.
Please check this forun to clear the situation
Re: Error in Remote Client Copy
thanks
Rishi Abrol

System Refresh: Running SE09 after system copy

Similar Messages

Maybe you are looking for