System registered in SLD invisible in solution manager configuration

Hi
I have installed Solution Manager EHP1 / Oracle 10g / Win2003 on a VM. I  ran into a issue in the Managed system configuration. The first step in the maanaged system configuration would help us select the satelllite systems which and configured in the SLD. Since systems were not yet added to SLD just the solution manager system shows up.
Here is the problem
I have added one system to the SLD using "Add Technical system" from http://localhost:50000/sld. This is a ABAP sysystem. The addition went through successfully however this does not reflect when I check the same in solution manager configuration "Managed system configuration"
As per the guide in the same page, I have checked on "Maintain Technical systems" Here too when I search for the system I created in SLD , I am not able to find it. Is there another way of manually maintaining the system in the SLD?
Any ideas as to why this might happen? Does one have to bounce the instance after adding systems to SLD/....  just wondering?
Ideas?
thanks
Ravi

Hi Rajeev
Thanks for your response however I fixed it. It looks like I had incorrectly mentioned the host in RZ70. Instead of mentioning the hostname of the solution manager I had mentioned the host name of the satellite system
The below link helped me fix the issue
http://help.sap.com/saphelp_nwpi71/helpdata/en/e7/01503ede925441e10000000a114084/content.htm
thanks
ravi

Similar Messages

  • CCMS is used for system monitoring , why should we use solution manage ?

    CCMS is used for system monitoring , why should we use solution manage ?
    Whats the relationship between CCMS system and SolMan?
    Thank you .

    hi,
    I just want to ask a question. At our client we have solution manager and CCMS. There is data in CCMS I can extract, it is loading on BW side ok the same number of recs,  but the problem on CCMS cubes says there are the same number of record in the cube and also showing as the data is ready for the reporting. But when I run the report and view the data as listcube it is empty. 
    ANy of you have the situation like this cube say it has the data but when do th BEX or infocube contents the cube is empty nothing in there. The same thing is happening with hourly, 15 minute and daily cubes.
    Anyhelp on this matter is appreciated

  • How to implement system monitoring(IT performance rep) in Solution Manager.

    Hi
    1.How to implement system monitoring(IT performance report) in Solution Manager?
    need to Monitroing *SAP Workload Areas -Total Database time,Total Avg. Response Time,ect..
    &SAP Operation System Areas -CPU Utilization* in SM workcenter is it possible?
    Please let me know how to configure ?
    2. Is it possible to monitor Solman system itself to get system monitoring--this is to test?
    regards
    Neni

    1.How to implement system monitoring(IT performance report) in Solution Manager?
    need to Monitroing *SAP Workload Areas -Total Database time,Total Avg. Response Time,ect..
    &SAP Operation System Areas -CPU Utilization* in SM workcenter is it possible?
    Please let me know how to configure ?
    Pls visit the roadmap of solution manager EHP1 -Operation with Solution manager
    you get many pdf and sim files for the same.
    https://websmp110.sap-ag.de/~sapidb/011000358700006940692005E.sim
    2. Is it possible to monitor Solman system itself to get system monitoring--this is to test?
    Yes it is possible
    visit the above section
    Hope solves prb
    Regards
    Prakhar

  • Solution manager configuration diagnostic host agent

    Hi experts,
    I am configuring the solution manager 7.1 SP9, I have one doubt whether our systems contains diagnostic host agent or not.
    in sapmmc at the time of restarting the sap services i found that DAA is there.So i got this doubt. Please clarify what is diagnostic host agent and SAPHost agent and also please provide any material for solution manager configuration. I am not getting clarity from google.
    Thanks&Regards,
    Patan Thavaheer.

    Hi,
    I executed the given command successfully in daaadm user.In command prompt it is showing that "task completed with status success".But in solution manager it is not getting visible. I checked in log file SMDsystem.0.log , i found exception in the log.
    find the exception
    migsolman.milltec.com:8001 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: 192.168.140.47 and port: 8001]
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       Detect possible changes in runtime.properties, reload data and restart the agent connection.
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       SLD configuration not found to register the agent, SLD Agent Registration is skipped.
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       Reconnection in progress...
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       [SMDConnector.reset] in progress ...
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       [SMDConnector.reset] invalid the agent handle com.sap.smd.agent.AgentHandle@1db9b30c.
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       Reading JStartup environment...
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       'SAPLOCALHOST' found, The value 'MIGDev' will be used to determine the Agent name.
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       InetAddress Resolving for 'MIGDev' - FQN: migdev.milltec.com SQN: MIGDev IP: 192.168.140.45
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       InetAddress Resolving for localhost - FQN: migdev.milltec.com SQN: MIGDev IP: 192.168.140.45
    Sep 16, 2014 10:55:55 AM [Thread[Agent Configuration Monitor,1,main]   ] Info       [SMDConnector.reset] Done.
    Sep 16, 2014 10:56:14 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] reset the p4 broker (close:true)
    Sep 16, 2014 10:56:14 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] p4 broker closed.
    Sep 16, 2014 10:56:14 AM [Thread[Connector,5,main]                     ] Info       Local P4 port opened on port '59704'.
    Sep 16, 2014 10:56:14 AM [Thread[Connector,5,main]                     ] Info       Local P4 server configured with transport layer 'None'.
    Sep 16, 2014 10:56:14 AM [Thread[Connector,5,main]                     ] Info       [P4ServerController] Remote object 'com.sap.smd.agent.remote.handle' (com.sap.smd.agent.AgentHandle@29bbbce6) is available in P4 Object Broker.
    Sep 16, 2014 10:56:14 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] p4 broker initialized.
    Sep 16, 2014 10:56:14 AM [Thread[Connector,5,main]                     ] Info       [p4://migsolman.milltec.com:8001] Checking server availability...
    Sep 16, 2014 10:56:45 AM [Thread[Connector,5,main]                     ] Error      Failed to connect to SMD server - user: basisadm
    Sep 16, 2014 10:56:45 AM [Thread[Connector,5,main]                     ] Warning    Connecting to SMD server p4://migsolman.milltec.com:8001 failed - error counter: 19 - com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    migsolman.milltec.com:8001 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: 192.168.140.47 and port: 8001]
    Sep 16, 2014 10:57:20 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] reset the p4 broker (close:true)
    Sep 16, 2014 10:57:20 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] p4 broker closed.
    Sep 16, 2014 10:57:20 AM [Thread[Connector,5,main]                     ] Info       Local P4 port opened on port '59704'.
    Sep 16, 2014 10:57:20 AM [Thread[Connector,5,main]                     ] Info       Local P4 server configured with transport layer 'None'.
    Sep 16, 2014 10:57:20 AM [Thread[Connector,5,main]                     ] Info       [P4ServerController] Remote object 'com.sap.smd.agent.remote.handle' (com.sap.smd.agent.AgentHandle@29bbbce6) is available in P4 Object Broker.
    Sep 16, 2014 10:57:20 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] p4 broker initialized.
    Sep 16, 2014 10:57:20 AM [Thread[Connector,5,main]                     ] Info       [p4://migsolman.milltec.com:8001] Checking server availability...
    Sep 16, 2014 10:57:51 AM [Thread[Connector,5,main]                     ] Error      Failed to connect to SMD server - user: basisadm
    Sep 16, 2014 10:57:51 AM [Thread[Connector,5,main]                     ] Warning    Connecting to SMD server p4://migsolman.milltec.com:8001 failed - error counter: 20 - com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    migsolman.milltec.com:8001 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: 192.168.140.47 and port: 8001]
    Sep 16, 2014 10:58:26 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] reset the p4 broker (close:true)
    Sep 16, 2014 10:58:26 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] p4 broker closed.
    Sep 16, 2014 10:58:26 AM [Thread[Connector,5,main]                     ] Info       Local P4 port opened on port '59704'.
    Sep 16, 2014 10:58:26 AM [Thread[Connector,5,main]                     ] Info       Local P4 server configured with transport layer 'None'.
    Sep 16, 2014 10:58:26 AM [Thread[Connector,5,main]                     ] Info       [P4ServerController] Remote object 'com.sap.smd.agent.remote.handle' (com.sap.smd.agent.AgentHandle@29bbbce6) is available in P4 Object Broker.
    Sep 16, 2014 10:58:26 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] p4 broker initialized.
    Sep 16, 2014 10:58:26 AM [Thread[Connector,5,main]                     ] Info       [p4://migsolman.milltec.com:8001] Checking server availability...
    Sep 16, 2014 10:58:56 AM [Thread[Connector,5,main]                     ] Error      Failed to connect to SMD server - user: basisadm
    Sep 16, 2014 10:58:56 AM [Thread[Connector,5,main]                     ] Warning    Connecting to SMD server p4://migsolman.milltec.com:8001 failed - error counter: 21 - com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: Cannot establish connection with any of the available instances:
    migsolman.milltec.com:8001 Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: 192.168.140.47 and port: 8001]
    Sep 16, 2014 10:59:31 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] reset the p4 broker (close:true)
    Sep 16, 2014 10:59:31 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] p4 broker closed.
    Sep 16, 2014 10:59:31 AM [Thread[Connector,5,main]                     ] Info       Local P4 port opened on port '59704'.
    Sep 16, 2014 10:59:31 AM [Thread[Connector,5,main]                     ] Info       Local P4 server configured with transport layer 'None'.
    Sep 16, 2014 10:59:31 AM [Thread[Connector,5,main]                     ] Info       [P4ServerController] Remote object 'com.sap.smd.agent.remote.handle' (com.sap.smd.agent.AgentHandle@29bbbce6) is available in P4 Object Broker.
    Sep 16, 2014 10:59:31 AM [Thread[Connector,5,main]                     ] Info       [SMDConnector.resetBroker] p4 broker initialized.
    Sep 16, 2014 10:59:31 AM [Thread[Connector,5,main]                     ] Info       [p4://migsolman.milltec.com:8001] Checking server availability...
    Regards,
    Patan Thavaheer.

  • IT Service Management (Solution Manager - Configuration)

    Dear Expert!
    We are using SM 7.1 SP11.
    The System Preparation and Basic Configuration has been done
    Now, we want to configure the IT Service Management under the Solution Manager Configuration.
    There are some steps are manual in the standard configuration;
    1) Configure Manually
    2) maintain Transaction Types
    3) Configure Automatically
    4) Perform Additional Configuration
    5) Create Template users.
    I don't aware by the manually steps, what should be provide in the manual configuration.
    I have downloaded document  ITSM Configuration Part 1 and 2 but material does not discuss about the steps to executed in the configuration.
    Please advise
    Regards

    Hi Anwer,
    Go to service.sap.com/instguides
    from here you can go to S -> SAP Solution Manager -> on the right pane scroll down and click on
    Planning, Installation, Upgrade Guides -> Look under Additional Guides - ITSM you will find the required documentation.

  • SAP Solution manager configurations

    Hi Experts,
    I need to do Solution manager configuration ,but i don't have idea about this.could you please help me and  before start the configuration what is the prerequisites for configuration.
    I need all above steps information what is the use of every one and tell me prerequisites for all steps.
    Please help me any one.It is helpful for me.
    Thanks
    J Jana

    Hi Janardhan,
    Please download the System Monitoring and technical monitoring guide
    https://websmp103.sap-ag.de/~sapidb/011000358700000409042011E
    Please watch the EEM demo
    https://websmp103.sap-ag.de/~sapidb/011000358700000383412011E/index.htm
    Please watch demo for connection monitoring
    https://websmp103.sap-ag.de/~sapidb/011000358700000479272011E/index.htm
    Please Downlaod Technical Administration guide
    https://websmp103.sap-ag.de/~sapidb/011000358700000592062012E.pdf
    ITSM:Part 1
    https://websmp103.sap-ag.de/~sapidb/011000358700000608542012E.pdf
    Part 2: https://websmp103.sap-ag.de/~sapidb/011000358700000608872012E.pdf
    Happy Learning.
    Vinod Palli

  • System landcape in large enterprise with solution manager

    Dear Guru,
    Do you have any ideas of how to set up Solution Manager in a big national enterprise?  Let's suppose
    a big company has a headquarter and serveral branches.
    Every branch has its ERP, BW, etc,  do you think it is better to set up respective Solution Manager system
    for each branch or just create a powerful one centrally in the headquarter. Of course the latter means
    less management but more authorization seperation related actions.
    Is there any recommendation for this situation? Your opinion and insight is highly appreciated.
    Thanks
    Ray

    Dear Gugu,
    I know Solution Manager support some scenarios for multiple customer .e.g VAR in service desk.
    But is it possible for hide solution or project infomation, especially content of respective business blueprint
    to different customers?
    I mean we want to use one single Solution Manager for multiple customers, but customers do not want their
    owned document and business process information shared with other customers.
    e.g.  one customer log on to SOLMAN, then he could view project or solution information of other customer,
    furthermore, he could also build up his business blueprint referring to other customer's  business blueprint.
    Is it possible to segregate this infomation?
    Thanks a lot.
    Ray

  • Adding systems with same SID in SMSY - solution manager

    Dear All,
    We are having systems with same SID's which  belongs to different landscape created for various customers.
    Currently We are having only one solution manager.
    I consider this example for explanation.
    Customer 1 : DEV --> QAS --> PRD ( SID's)
    customer 2 :  DEV --> ACC --> PRD  ( SID's)
    I would like to add  these 6 systems in a solution manager. For Customer 1 , I have included the systems in SMSY . But when i tries to add DEV, PRD for customer 2 , it fails  since this SID's are already present.
    Is there any other way to include by giving the different SID's DE2 but with correct IP and host Or we need to have one more solution manager ? Please anyone suggest me on this
    Thanks
    Raj

    Dear Juan ,
       We can add systems with same SID in smsy. I have attached the way in which i have done. This may help others. Thank you all for your suggestion
    Only use more than three characters if your landscape contains multiple systems with the same system ID (if you have a mirrored backup system that has the same ID as the original system, for example).
    If multiple systems in your landscape have the same system ID, choose as system name the system ID with a suffix of up to 5 characters (a sequential number, for example) to create a unique system name.
    The system accepts a system name of more than 3 characters if you choose Enter to confirm.
    Thanks
    Raj

  • 'Setup System Monitoring' option  is disabled in solution manager

    Hello,
    I am trying to setup system monitoring for different systems in solution manager but the 'Setup System Monitoring' is disabled.
    In solman I go to Solution_manager --> Operations Setup --> on the right side pane 'Setup System Monitoring' is disabled. How can you change this to change mode so that you can configure monitoring for different systems? Any idea, please help.
    Thank you in advance.
    Sameer
    Edited by: Sameer Pant on Mar 19, 2011 1:07 AM

    Hi Lakshmi,
    But when i right click on the qualifier
    No u hv to right click on a field to which Compound field is mapped ( Ur Main Table Field)
    Right Click on Compound field & choose option Set Qualified Update.
    New Links: Create
    Existing Links: Update (All Mapped Qualifiers)
    Thanks,
    Maheshwari

  • Is it possible to connect a DEV System to more than one SAP Solution Manage

    Hello,
    My system DEV is already connected to a first SAP Solution Manager, I would also like to reconnect the same system so that it communicates and will be monitored by a second SolMan.
    Is it possible to do so and the do the operation involve any risks ?
    Thanks for your help
    Regards
    Ben

    Hello,
    This is possible in many scenarios. Often this is done to distribute load, for example on Solution Manager will do the Service Desk Function, one may do ChaRM, one may be doing Monitoring & Reporting, one may be doing Diagnostics.
    In these cases a managed ssytem can be connected to many Solution Manager systems.
    However as Mateus has pointed out, you cannot connect one managed to two Solution Managers and do SMD on both Solution
    Manager systems, but you can have more than one Solution Manager doing Diagnostics.
    Even in the case of EWA, while you can connect a Managed system to multiple Solution Manager systems and have then generate a report, one of the Solution Manager systems must be defined as the Master.
    So the specific scenario may place some restrictions on connecting a managed system to more than one Solution Manager,
    but for most instances it can be done.
    Regards,
    Paul

  • Solution manager configuration for EHP4 install (Product Version Problem)

    Hi guys!
    I'm new on SAP and SDN is a help all days and this time i really need some help from you guys!
    Im installing EHP 4 and need the XML Stack file, so i go to the solution manager to generating them. But after configuring the logical components, make the associations, etc. on create maintenence transaction, the product version dropdownlist is empty...
    It is configured but it dont appears... Anyone had this problem before and could give me some help!
    I will appreciate that!
    My regards,

    Hi,
    In SMSY, the system should have product version as SAP ERP 6.0.
    Next the logical component created for ECC Server should also reflect this version.
    The solution you create in DWSP should include this logical component via the Solution Landscape definition. Here again the logical component should show the product version.
    If all above are in place, the MOPZ for the respective solution should have the product version list populated.
    Regards,
    Srikishan

  • Reset Solution Manager configuration

    Hello experts,
    We are setting Solution Manager up for incident management but the configuration was started without SP15 and many things were manually done so now, there are a lot of users and even systems that weren't succesfuly created... bottom line, the configuration is a mess. Is there any way to reset this configuration and start over? I specially want to delete ibase's, systems and bp's.
    What would you suggest?
    Thanks in advance

    Hi Maria,
    There isn't an easy way to whipe everything out and start fresh. However, you can archive messages, update your iBase, retire BP's and fix your system landscape. You can even delete BP's if they are not assigned to messages. If they are, I read of a fix where someone replaced the BP's in the tables and then was able to delete them. If you can't delete your iBase it's because you don't have an SAP note installed.
    If you browse the forum for each of the items you want to fix, you'll find the info.
    regards,
    Jason

  • Solution Manager Configuration

    Hi All,
    I want to configure Solution Manager for Support Activities and their reporting like creation of tickets by end user, resoultion time according to category. I need a documentation on the same if possible some configuration document.
    Help on the same!!!!
    Anurag

    Hi Raghav,
    Kindly check missing authorizations of user solman_btc.
    Regards,
    Varenyam Trivedi

  • Solution manager configuration for SRM

    Hi all
    we are goin to configure SAP SRM 5.0. we need to configure standard business scenarios in solution manager for the same.can somebody provide relevant links and documents regarding where to find these in solution manager and how to go about this?this would be really helpful.points would be awarded immediately.

    Hi Harsa,
    Here you can find the Webex recorded sessions
    https://websmp207.sap-ag.de/~sapidb/011000358700000429402008E
    Hareesha

  • SDM agent is not registered with SDM server of Solution Manager server

    Hi,
    We are in process of configuring EWA report for JAVA stack of SAP system along with ABAP stack. For ABAP stack the EWA report generation is straight forward and it is working fine. We are facing the problem while configuring EWA report for JAVA stack. Pls. find below the steps that we have followed and currently where we are stuck,
    1) Installation of Willy introscope on Solman server.
    2) Define JAVA component for each SAP system in SMSY
    3) Installation of SDM Agent on all managed systems
    4) Trying to attach SDM Agent to SDM server(solman) with the use of smdsetup.bat (managingconf & sldconf ).still we are getting error in smd agent log file as given below:
    ===============
    Nov 24, 2011 6:16:09 PM [Thread[Connector,5,main]] Info       [p4://xxxx.xxxx.int:8103] Checking server availability...
    Nov 24, 2011 6:16:39 PM [Thread[Connector,5,main]] Error      Failed to connect to SMD server - user: SMD_ADMIN
    Nov 24, 2011 6:16:39 PM [Thread[Connector,5,main]] Warning    Connecting to SMD server p4://xxx.xxx..int:8103 failed - error counter: 0 - com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances
    *     Nested exceptions are:*
    *     com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: xx.xx.xx.xx and port: 8103*=================
    5) The solman_setup t-code execution is successful in Solman server.
    6)  Trying to configure Technical system for JAVA system type through solman_setup : At this time we are getting another error as shown below:
    ========
    The Managed System does not fulfil the Diagnostics prerequisites
    Software with prerequisite are incorrect: Found SAP J2EE ENGINE 7.00 with sp level 0, minimum sp level required is 9: Please install or upgrade the required software component.========
    I have gone through the SAP note: 1274287 : My solman system is already on the required patch level for LMservice and St 400 SP. Also, the managing systems Java patch level is more then sp06 which is minimum level required.
    I need your help to know, why i am getting this SAP J2EE ENGINE 7.00 patch level error although my Java stack is up to date with the required patches.
    Waiting for your reply friends.
    Regards,

    Hi,
    please let us know your solman version.
    check and apply the sap note
    [Note 1277258 - Diagnostics prerequisite check failure|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1277258]
    Thanks,
    Jansi

Maybe you are looking for

  • Can't print .indd booklet to PDF; opens print utility instead of Acrobat

    Thanks in advance for any help you can lend. I have a 16 page .indd document that I'm trying to export via "print booklet", using Adobe PDF 9.0 as my printer. Every time I try to print as a PDF, it goes through the process of compiling the images, lo

  • CR 2008 UI display problems on Windows Vista

    Hi all, I have just installed CR 2008 SP2 on my Windows Vista PC, and I am intermittantly having UI display problems when I go between "Design" and "Preview" views of my reports. It seems most often that the "Design" view has the screen redraw proble

  • I am not Getting emails when i schedule the Report.

    Hi All, When i Schedule the Report in obiee 11g i am Getting Alerts Successfully but am not getting Mail. When i Schedule the Publisher i am getting mails. ERROR Details: Eventually succeeded, but encountered and resolved errors... Number of skipped

  • Upgrade  from Crystal Reports 10

    We have an web application written with dot net 1.1 and it has many reports running on crystal reports 10.0 .It was on windows 2003. Now we have migrated app to frameowrk 4.0 and we planed to run it on windows 2008 server. As you may guess reports be

  • How to view all pins on map on iphone 5

    How can you view all your bookmarks on maps on iphone 5?