System reinstall question

i've got a (new) late 2011 macbook pro, bought it on sale at future shop. when i did the migration data transfer assistant from my old mac to the new one, something got messed up. so now i have to wipe my late 2011 macbook pro clean and start fresh. i'm not quite sure how to do this since the old os versions always came with a cd.
i have a mountain lion installer on a thumb drive. can i boot my 2011 macbook pro from the thumb drive and use disk utility to reformat and then install a clean system directly from the thumb drive?
sorry for the newbie questions.

Boot into recovery mode, launch Disk Utility, wipe the HD, reinstall Lion, and on first boot follow the steps in Pondini's Setup New Mac guide to migrate properly. This assumes you still have the old Mac.

Similar Messages

System Reinstall Impact on iPod and iTunes

I need to do a system reinstall to the computer through which I access iTunes and with which I synch my iPod. Does this mean I will lose all the music I've downloaded? How do I do this to avoid losing music and having to start from scratch?

Make a back up of all the music on your computer before you reinstall the OS.
How to back up your media in iTunes.
Buegie's complete back up strategy.
When you're ready, use the back up you made to put all the music back in your new iTunes.
When you connect the iPod for the first time, you will see this message appear on screen.
You can click "yes" and your iPod will now use the new iTunes as it's "home" library.
Any more questions before you begin, post back.

I just had my old operating system reinstalled, and i can't save pages documents, don't know how to install word

i just had my old operating system reinstalled after a breakdown, and now i can't save pages documents. i don't know how to install word.

What was your old system?
What is your new System?
What version of Pages?
How did you install it?
I don't know if you can see what's on my screen, but I definitely can't see what's on yours.
To Install Word, buy it and follow the instructions.
Peter

How can you save your bookmarks in a different doc or file so that they won't get lost if a system reinstall happens..?

i'd like the ability to save bookmarks to a separate doc or file so that i can ensure i have them if a system reinstall happens.

https://support.mozilla.com/en-US/kb/Backing+up+and+restoring+bookmarks
http://support.mozilla.com/en-US/kb/Backing+up+your+information

I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! It seems to see the scanner, but never the printer. HELP!

I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! I see no printers available in the Print & Scan area. If I click "+" it seems to see the scanner, but never the printer. HELP!

The printer component uses a different protocol to advertise itself on the network compared to the scanner component and it can take several seconds longer to appear after the scanner has.
That said, with the introduction of AirPrint, the MG should be seen as Bonjour Multifunction in the Add Printer window, as shown below.
Selecting this Bonjour Multifunction entry will create a printer using AirPrint and a scanner using the iCA driver.
So do you see the MG5220 as Bonjour Multifunction or just Bonjour?

I had a system reinstall on my iMac today. I am am using time machine, but I can,t reinstate my machine with all of,y old settings. Any ideas?

I had a system reinstall on my iMac today. I am am using time machine, but I can,t reinstate my machine with all of,y old settings. Any ideas?

Use Migration Assistant http://support.apple.com/kb/HT4413
If you previousley backed up from OS X Lion you won't be able to restore to a Snow Leopard partition

CS3 and system reinstall problem

I have had to reinstall the system on my MacPro. Reinstalled from the disc and then updated to 10.5.6 using the combo updater and everything seems to be working again.
I understand when you do a system reinstall that it doesn't touch any 3rd party applications.
I opened Photoshop and discovered that no matter what I type (font or size), it is pixilated and all jagged.
The other Adobe programs I have don't have this problem.
What am I missing to cause this problem? Any ideas?
Vicki

I would start by trying a New User (on the theory only Ps is hosing that font).
http://www.gballard.net/macrant/osx_troubleshooting.html
If the problem clears here, go back to you normal account and delete your Ps user preferences.
Also Font Agent Pro has a free demo you can download and check your fonts.
http://www.insidersoftware.com/FA_pro4_details.php
Also check out Insider Software SMASHER
http://www.insidersoftware.com/SM.php
Smasher
Flatten Mac OS X font problems fast
Smasher gives you the power to look deep inside your fonts and suitcases to solve problems fast. Using Smasher, you can:
Stop garbled text display
Prevent output problems
Clear pesky font caches
Verify font outlines
Perform suitcase surgery
Check font properties and permissions

Question about operating system reinstall on Portege R500

I have purchased the R500 64SSD version, and for some reason it never struck me to check if there was a DVD drive on it.
That was rather embarassing.
I know it is easy to purchase an external drve to copy software etc on to the Portege, so that isnt so bad.
However, I am considering a re-install, possibly to XP, but maybe just to reduce the repulsive amount of bloatware i got on my machine when i switched it on.
Now to the crux of the matter: if i use an external USB disk drive, i need USB drivers. If i delete the OS, that will delete the drivers.
So, finally, my question is: How in the name of Hell is anyone supposed to put a fresh install into an R500?
Thanks for your patience.

I understand everything till the point with the bloatware.
But what I dont understand is: what do you want with a USB disk drive? I hope you dont mean a USB-HDD (its a little bit confusing). ;)
Usually you can use all drives without the need of some drivers because the machine offers you the option to boot from a USB device after powering the machine up and see the Toshiba logo pass...
You must only press F12 and choose the option to boot from an external USB CD/DVD drive. Thats all.
Greets

Need help understanding service, repair, operating system reinstall

I bought a Thinkpad X1 Carbon 3443 laptop on the black friday sale in November 2013. Due to demand, the unit didn't ship until after Christmas. I didn't complain, but Lenovo offered a 5% rebate for my troubles. Still waiting on that to be processed.I've had all the documented problems with the Intel 6205 wireless card that are all over the forums. I finally upgraded my router just to resolve the issue.In March of 2015, after the warranty expired, one of the hinges broke. I took it to an authorized repair facility and was told (after 4 weeks) the part was no longer available. I called the service center listed on the website. They offered to ship me a box so I could send them the laptop for evaluation. Since it was out of warranty I would have to pay for any repairs.After two weeks, they sent the laptop back. They never contacted me during the process. I didn't get any quotes on the cost, nor did I authorize any work. They say they fixed the laptop. I can see the hinge is physically fixed. However, I cannot start the laptop. They wiped all my data, including the operating system. I have all my files backed up, but since this laptop does not have a CD or DVD drive, I don't have a way to reinstall the OS, which is Windows 8.1.Also, today, I received an invoice, saying they charged my credit card for what is almost the cost of a new machine. Lesson learned, never give the Chinese your credit card. So, my question, is there any way I can reinstall Windows 8.1? I don't have it on a disk or any hardware. It was shipped with the laptop at purchase. Service deleted it, so I don't have a copy at all. Also, don't be like me. Buy something else.

After looking at the Telus specific software download page (in North American menu) I noticed that there is a link for the 4.5 version and the 4.3 that I have. I guess 4.5 is available there then. I might give Telus a quick call and see if they know anything about it. More then likely not. The tech support people tend to be ill informed on anything detailed such as this.
thanks again

Reformat/Reinstall Question re Panther

Hi and sorry for any duplication of this questionin other posts.
I need to reformat a 160G HD in my Dual Boot G4. OSX 10.3.9
must be reinstalled. It is too late to use clone apps like SuperDuper because the drive was unfortunately already erased, and a manual drag-back of the entire contents of the
backed-up contents of the HD was performed, leaving missing
invisible files missing. Hence, System 9 Folder seems to be okay, but, for OSX apps there are certain apps - mainly browser/
email, which i would prefer to retain the original settings, and,
migrate existing email folder contents (inbox/sent box etc).
The browser is Netscape 7.2.
If possible i'd prefer to simply drag/drop over anything that i can
after wiping and reinstalling/updating the HD system back up to 10.3.9. I also assume that for my Sys. 9 folder (dual-bootable MDD) i can do a clean install and drag/drop prefs manually for the various apps within the OS 9 domain which i boot into independent and separately of OSX operation.
I'm looking for the shortest path by which to accomplish this
reinstall and to minimize the amount of individual application
reinstallations from scratch...wherever i can drag existing apps
and associated Prefs into the right places within OSX Panther.
Any advice much appreciated.
Thanks,
Mike

Cornelius, thanks and i will try to clarify as concisely
as possible;
Does this HDD have anything on it currently?<<
Yes, the HD does have elements of the previous OSX System
but will not boot from OSX (a result of the "drag-back" of
backed up content, along with my OS 9 Folder, rather than
being able to successfully use SuperDuper or other clone
app....
Do I understand that you backed up the HDD in question by copy by dragging to a backup drive, erased HDD and copied stuff back by dragging?<< </div>
Yes. As such, System 9 FOlder/Contents seems to be fine
having done it that way, but i recognize why OSX does not.
Are you planning to erase the drive again, install Panther, and repeat the process of copying by dragging?<<</div>
I want to erase/reformat the drive again, and reinstall Panther using proper Disk-Set procedure of restore/reinstall
but save original prefs of as much of the previous system(s)
apps (for both OS 9 and OS X) i want to save/preserve..
presumably having to do so by manual drag where possible.
Does this mean you want to repeat the process which you have already performed?<< </div>
No, just whatever can be salvaged for individual application
preferences, most importantly, Browser/Email (bookmarks,
inbox/address books, mail settings prefs)- within BOTH
systems... I would like to preserve, rather than having to
a) re-enter User Prefs, Mail Settings and also need to
keep existing Email in the respective browser mail apps.
Other apps, i can take the time to reinstall and re-enter
registration data.
I hesitate to make assumptions in terms of what you are doing. However, backing up and restoring by copying by dragging, while it works for simple data files, for some typs of apps, and for OS 9 System Folder and OS 9 Applications folder, will not give you the desired outcomes for other types of files. In OS X there are hidden files which are essential to the efficient functioning of the OS that cannot be copied by dragging.<<</div>
My questions above is to ascertain exactly what you have done so far and what the current situation is. We can then take it from there to see what can be done next to minimize the damage and enable you to recover in the best way possible.<<
I totally understand. the entire situation as it stands
happened due to some anomaly whereby using CarbonCopyCloner
(and SuperDuper before that) was sidetracked because both
programs reported inability to recopy "All Files" back to
the Drive (error message to that effect). To get back up and running in OS 9, I then just dragged OS 9 System back
onto the HD and have been using that environment only.
Soo, the bottom line is, i need to erase the HD and reinstall it all...but want to save whatever prefs i can
in the proper fashion. (Far more familiar with doing so in
OS 9 stuff than OSX)
Hope that addresses where i'm at with this and appreciate
your help.

Network problems after update; system reinstall not fixing it.

Hello, first post here ^^
Sorry if I write with a bit of engrish. I'm very tired ^^"
My brother's laptop, a Portuguese Classmate PC (aka "Magalhães", version MG2 -- unfortunately, I can't find the corresponding international version, but have a picture) doesn't has any network at all, be it wired or wireless, with the updates of 3/August/2011 installed. I think the problem is udev.
I have no problems when using an installation media, at least for wired network.
Even after reinstalling, I still have no network.
Wired
The problem with wired, is that the eth0 interface is gone. Have tried network and NetworkManager, and it's just gone. In the output of ifconfig I only have the loopback interface (and would have wlan0, if I had the firmware for the wireless card installed).
Wired problem solved! Sorry, I actually searched the Internet for a solution and couldn't find anything useful, and only now noticed there's already a thread here about it. I should have searched this forum, instead of the Internet... sorry!
Wireless
Previously, I only had to install the rtl8192se chipset drivers from AUR.
But now, with the latest updates, the kernel [size=1](or the udev, I don't know which it is)[/size]was constantly giving me errors through tty, regarding to wifi. It could scan for networks, but not connect. I have tried with WPA and no security, result was the same.
Config files and logs
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pt_PT.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Lisbon"
KEYMAP="pt-latin1 pt-latin9 euro"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(mii r8169 pcspkr snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="MTomas"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(syslog-ng dbus network netfs @openntpd crond cups alsa gdm)
hwdetect --show-net
NET : ppp_generic slhc rfkill
dmesg (sorry about the very long output, I don't really know whats' useful or not...)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5c0000 (usable)
[ 0.000000] BIOS-e820: 000000003f5c0000 - 000000003f5cc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f5cc000 - 000000003f5cf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5cf000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Intel Corporation Intel powered classmate PC/Intel powered classmate PC, BIOS BPPNV20L.90A.0008.2010.0909.1822 09/09/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f5c0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7d40] f7d40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f5c0000
[ 0.000000] 0000000000 - 003f400000 page 2M
[ 0.000000] 003f400000 - 003f5c0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f5c0000 @ 3f5bd000-3f5c0000
[ 0.000000] RAMDISK: 37c12000 - 37e01000
[ 0.000000] ACPI: RSDP 00000000000f7d10 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003f5c5013 00074 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f5cbc60 000F4 (v03 INTEL 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 000000003f5c61a9 05A43 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003f5cefc0 00040
[ 0.000000] ACPI: TCPA 000000003f5cbd54 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: MCFG 000000003f5cbd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003f5cbdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000003f5cbdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003f5cbe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 000000003f5cbe8a 00176 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 000000003f5c5609 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5563 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5087 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f5c0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000003f5c0000
[ 0.000000] NODE_DATA [000000003f5b8000 - 000000003f5bcfff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003dc00000-ffff88003e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003f5c0
[ 0.000000] On node 0 totalpages: 259405
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3493 pages used for memmap
[ 0.000000] DMA32 zone: 251931 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f200000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255851
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1011404k/1038080k available (4019k kernel code, 460k absent, 26216k reserved, 3335k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.531 MHz processor.
[ 0.003340] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.60 BogoMIPS (lpj=5541770)
[ 0.003531] pid_max: default: 32768 minimum: 301
[ 0.003952] Security Framework initialized
[ 0.004047] AppArmor: AppArmor disabled by boot time parameter
[ 0.004419] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.007667] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008243] Mount-cache hash table entries: 256
[ 0.009502] Initializing cgroup subsys ns
[ 0.009600] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009736] Initializing cgroup subsys cpuacct
[ 0.009925] Initializing cgroup subsys memory
[ 0.010064] Initializing cgroup subsys devices
[ 0.010158] Initializing cgroup subsys freezer
[ 0.010249] Initializing cgroup subsys net_cls
[ 0.010340] Initializing cgroup subsys blkio
[ 0.010565] CPU: Physical Processor ID: 0
[ 0.010656] CPU: Processor Core ID: 0
[ 0.010743] mce: CPU supports 5 MCE banks
[ 0.010839] CPU0: Thermal monitoring handled by SMI
[ 0.010849] using mwait in idle threads.
[ 0.012451] ACPI: Core revision 20110316
[ 0.023363] ftrace: allocating 15966 entries in 63 pages
[ 0.026783] Setting APIC routing to flat
[ 0.027287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061420] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.063329] APIC calibration not consistent with PM-Timer: 359ms instead of 100ms
[ 0.063329] APIC delta adjusted to PM-Timer: 1039059 (3740601)
[ 0.063329] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.063329] ... version: 3
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.080180] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106732] Booting Node 0, Processors #1 Ok.
[ 0.106880] smpboot cpu 1: start_ip = 98000
[ 0.006666] CPU0: Thermal monitoring enabled (TM1)
[ 0.203381] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.210009] Brought up 2 CPUs
[ 0.210112] Total of 2 processors activated (6652.11 BogoMIPS).
[ 0.210657] devtmpfs: initialized
[ 0.217499] PM: Registering ACPI NVS region at 3f5cc000 (12288 bytes)
[ 0.221762] print_constraints: dummy:
[ 0.222075] NET: Registered protocol family 16
[ 0.222464] ACPI: bus type pci registered
[ 0.222965] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[ 0.223102] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[ 0.225887] PCI: Using configuration type 1 for base access
[ 0.226974] bio: create slab <bio-0> at 0
[ 0.229126] ACPI: EC: Look up EC in DSDT
[ 0.237091] ACPI: SSDT 000000003f5c5ed2 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.237853] ACPI: Dynamic OEM Table Load:
[ 0.238022] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.238519] ACPI: SSDT 000000003f5c5868 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.239233] ACPI: Dynamic OEM Table Load:
[ 0.239401] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.240151] ACPI: SSDT 000000003f5c60d5 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.240891] ACPI: Dynamic OEM Table Load:
[ 0.241061] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.241466] ACPI: SSDT 000000003f5c5e4d 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.242187] ACPI: Dynamic OEM Table Load:
[ 0.242357] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.243484] ACPI: Interpreter enabled
[ 0.243588] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.243922] ACPI: Using IOAPIC for interrupt routing
[ 0.255265] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.263625] ACPI: No dock devices found.
[ 0.263714] HEST: Table not found.
[ 0.263800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.265505] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.265765] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.266086] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.266668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.270174] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.270276] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.270400] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.270524] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.270647] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.270772] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.270898] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
[ 0.271021] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
[ 0.271118] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.271263] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.271320] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.271335] pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
[ 0.271346] pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
[ 0.271356] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.271366] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
[ 0.271410] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.271424] pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
[ 0.271531] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.271559] pci 0000:00:1b.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.271649] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271659] pci 0000:00:1b.0: PME# disabled
[ 0.271694] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.271793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271802] pci 0000:00:1c.0: PME# disabled
[ 0.271842] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.271935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.271944] pci 0000:00:1c.1: PME# disabled
[ 0.271983] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.272082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.272091] pci 0000:00:1c.2: PME# disabled
[ 0.272136] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.272197] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.272257] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.272338] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.272398] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.272459] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.272511] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.272596] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.272670] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.272701] pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
[ 0.272808] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.272817] pci 0000:00:1d.7: PME# disabled
[ 0.272848] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.272944] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.273056] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.273215] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.273244] pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
[ 0.273259] pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
[ 0.273274] pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
[ 0.273289] pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
[ 0.273304] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
[ 0.273334] pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
[ 0.273383] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.273391] pci 0000:00:1f.2: PME# disabled
[ 0.273418] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.273494] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.273613] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.273709] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.273718] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.273730] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.273884] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.273955] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.274076] pci 0000:03:00.0: reg 18: [mem 0xf0520000-0xf0520fff 64bit pref]
[ 0.274148] pci 0000:03:00.0: reg 20: [mem 0xf0510000-0xf051ffff 64bit pref]
[ 0.274199] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.274363] pci 0000:03:00.0: supports D1 D2
[ 0.274368] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274387] pci 0000:03:00.0: PME# disabled
[ 0.274568] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.274663] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.274672] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.274685] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.274782] pci 0000:04:00.0: [10ec:8172] type 0 class 0x000280
[ 0.274812] pci 0000:04:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.274832] pci 0000:04:00.0: reg 14: [mem 0xf0100000-0xf0103fff]
[ 0.274954] pci 0000:04:00.0: supports D1 D2
[ 0.274960] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274970] pci 0000:04:00.0: PME# disabled
[ 0.280025] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.280144] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.280152] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.280164] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280266] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
[ 0.280369] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.280378] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.280390] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280397] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.280404] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.280411] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.280417] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.280424] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.280431] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.280438] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[ 0.280445] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.280451] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.280490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.280660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.280757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.280849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.280941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.281235] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.281497] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.281828] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.282049] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.282310] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.282632] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.297275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.297984] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.298679] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.299375] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.300108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.300923] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.301740] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.302444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.303298] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.303339] vgaarb: loaded
[ 0.303656] PCI: Using ACPI for IRQ routing
[ 0.303746] PCI: pci_cache_line_size set to 64 bytes
[ 0.303778] pci 0000:00:1b.0: address space collision: [mem 0xf0500000-0xf0503fff 64bit] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.303990] pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304159] pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304389] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.304395] reserve RAM buffer: 000000003f5c0000 - 000000003fffffff
[ 0.304709] NetLabel: Initializing
[ 0.304793] NetLabel: domain hash size = 128
[ 0.304878] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.304991] NetLabel: unlabeled traffic allowed by default
[ 0.305112] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.305216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.305468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.316700] Switching to clocksource hpet
[ 0.319651] Switched to NOHz mode on CPU #0
[ 0.319806] Switched to NOHz mode on CPU #1
[ 0.333572] pnp: PnP ACPI init
[ 0.333697] ACPI: bus type pnp registered
[ 0.335270] pnp 00:00: [bus 00-3f]
[ 0.335277] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.335283] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.335289] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.335295] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.335301] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.335307] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.335312] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.335318] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.335324] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.335329] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.335335] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.335341] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.335346] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.335352] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.335358] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.335363] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.335369] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.335375] pnp 00:00: [io 0x0d00-0xfdff window]
[ 0.335381] pnp 00:00: [mem 0x00000000 window]
[ 0.335386] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.335514] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.335756] pnp 00:01: [io 0x0010-0x001f]
[ 0.335763] pnp 00:01: [io 0x0024-0x0025]
[ 0.335768] pnp 00:01: [io 0x0028-0x0029]
[ 0.335773] pnp 00:01: [io 0x002c-0x002d]
[ 0.335778] pnp 00:01: [io 0x0030-0x0031]
[ 0.335783] pnp 00:01: [io 0x0034-0x0035]
[ 0.335788] pnp 00:01: [io 0x0038-0x0039]
[ 0.335793] pnp 00:01: [io 0x003c-0x003d]
[ 0.335798] pnp 00:01: [io 0x0072-0x0077]
[ 0.335803] pnp 00:01: [io 0x0080]
[ 0.335808] pnp 00:01: [io 0x0090-0x009f]
[ 0.335813] pnp 00:01: [io 0x00a4-0x00a5]
[ 0.335818] pnp 00:01: [io 0x00a8-0x00a9]
[ 0.335823] pnp 00:01: [io 0x00ac-0x00ad]
[ 0.335827] pnp 00:01: [io 0x00b0-0x00b5]
[ 0.335832] pnp 00:01: [io 0x00b8-0x00b9]
[ 0.335837] pnp 00:01: [io 0x00bc-0x00bd]
[ 0.335842] pnp 00:01: [io 0x0800-0x080f]
[ 0.335848] pnp 00:01: [io 0x1000-0x107f]
[ 0.335853] pnp 00:01: [io 0x1180-0x11bf]
[ 0.335858] pnp 00:01: [io 0x002e-0x002f]
[ 0.335869] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.335874] pnp 00:01: [io 0xfe00]
[ 0.335879] pnp 00:01: [io 0x0068-0x0077]
[ 0.335884] pnp 00:01: [io 0x0200-0x020f]
[ 0.335889] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.335895] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.335900] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.335906] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[ 0.336082] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.336183] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.336278] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.336373] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.336468] system 00:01: [io 0xfe00] has been reserved
[ 0.336560] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.336656] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.336798] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.336897] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.336996] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.337098] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.337130] pnp 00:02: [io 0x0000-0x000f]
[ 0.337136] pnp 00:02: [io 0x0081-0x008f]
[ 0.337141] pnp 00:02: [io 0x00c0-0x00df]
[ 0.337147] pnp 00:02: [dma 4]
[ 0.337215] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.337242] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.337263] pnp 00:03: [irq 13]
[ 0.337336] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.337431] pnp 00:04: [io 0x0070-0x0071]
[ 0.337445] pnp 00:04: [irq 8]
[ 0.337513] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.338017] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.338032] pnp 00:05: [irq 4]
[ 0.338239] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.338320] pnp 00:06: [io 0x0061]
[ 0.338392] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.338454] pnp 00:07: [mem 0xfed40000-0xfed44fff]
[ 0.338534] pnp 00:07: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[ 0.338562] pnp 00:08: [io 0x0060]
[ 0.338567] pnp 00:08: [io 0x0064]
[ 0.338581] pnp 00:08: [irq 1]
[ 0.338653] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.338686] pnp 00:09: [irq 12]
[ 0.338759] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.339063] pnp 00:0a: [mem 0xff800000-0xffffffff]
[ 0.339151] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.339574] pnp: PnP ACPI: found 11 devices
[ 0.339666] ACPI: ACPI bus type pnp unregistered
[ 0.349216] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40000000-0x400fffff]
[ 0.349328] pci 0000:00:1b.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit]
[ 0.349464] pci 0000:00:1b.0: BAR 0: set to [mem 0x40100000-0x40103fff 64bit] (PCI address [0x40100000-0x40103fff])
[ 0.349606] pci 0000:00:1d.7: BAR 0: assigned [mem 0x40104000-0x401043ff]
[ 0.349710] pci 0000:00:1d.7: BAR 0: set to [mem 0x40104000-0x401043ff] (PCI address [0x40104000-0x401043ff])
[ 0.349849] pci 0000:00:1f.2: BAR 5: assigned [mem 0x40104400-0x401047ff]
[ 0.349950] pci 0000:00:1f.2: BAR 5: set to [mem 0x40104400-0x401047ff] (PCI address [0x40104400-0x401047ff])
[ 0.350115] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.350248] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[ 0.350352] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.350483] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.350580] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.350673] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.350773] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.350874] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.351009] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0540000-0xf055ffff pref]
[ 0.351133] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.351225] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.351324] pci 0000:00:1c.1: bridge window [mem 0x40000000-0x400fffff]
[ 0.351425] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.351558] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.351649] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.351749] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.351850] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.351981] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
[ 0.352070] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.352164] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.352258] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.352370] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.352482] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.352586] pci 0000:00:1c.0: setting latency timer to 64
[ 0.352607] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.352709] pci 0000:00:1c.1: setting latency timer to 64
[ 0.352728] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.352830] pci 0000:00:1c.2: setting latency timer to 64
[ 0.352844] pci 0000:00:1e.0: setting latency timer to 64
[ 0.352853] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.352859] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352865] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352871] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352877] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352883] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.352890] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.352896] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.352902] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.352908] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.352914] pci_bus 0000:02: resource 1 [mem 0x40400000-0x405fffff]
[ 0.352921] pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.352927] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.352933] pci_bus 0000:03: resource 1 [mem 0x40000000-0x400fffff]
[ 0.352940] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.352946] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.352952] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.352959] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.352966] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.352972] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352978] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352984] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352990] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352996] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.353002] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.353009] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.353015] pci_bus 0000:11: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.353230] NET: Registered protocol family 2
[ 0.353666] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.354759] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.356562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.357461] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.357565] TCP reno registered
[ 0.357677] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.357790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.358526] NET: Registered protocol family 1
[ 0.358655] pci 0000:00:02.0: Boot video device
[ 0.358843] PCI: CLS 32 bytes, default 64
[ 0.358970] Unpacking initramfs...
[ 0.422600] Freeing initrd memory: 1980k freed
[ 0.424221] Simple Boot Flag at 0x36 set to 0x1
[ 0.425202] audit: initializing netlink socket (disabled)
[ 0.425328] type=2000 audit(1312465475.423:1): initialized
[ 0.426137] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.431274] VFS: Disk quotas dquot_6.5.2
[ 0.431768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.432308] msgmni has been set to 1979
[ 0.433016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.433243] io scheduler noop registered
[ 0.433398] io scheduler deadline registered
[ 0.433626] io scheduler cfq registered (default)
[ 0.433955] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.434029] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.434158] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.434222] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.434347] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.434410] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.434777] intel_idle: MWAIT substates: 0x20220
[ 0.434799] intel_idle: v0.4 model 0x1C
[ 0.434803] intel_idle: lapic_timer_reliable_states 0x2
[ 0.434847] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.435010] ERST: Table is not found!
[ 0.435250] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.456560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.674724] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.727052] Linux agpgart interface v0.103
[ 0.727338] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.731303] i8042: Detected active multiplexing controller, rev 1.1
[ 0.734370] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.734541] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.734705] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.734863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.735024] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.735354] mousedev: PS/2 mouse device common for all mice
[ 0.753576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.753717] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.753983] cpuidle: using governor ladder
[ 0.754335] cpuidle: using governor menu
[ 0.754959] TCP cubic registered
[ 0.755047] NET: Registered protocol family 17
[ 0.755152] Registering the dns_resolver key type
[ 0.755524] PM: Hibernation image not present or could not be loaded.
[ 0.755541] registered taskstats version 1
[ 0.756395] rtc_cmos 00:04: setting system clock to 2011-08-04 13:44:36 UTC (1312465476)
[ 0.756612] Initializing network drop monitor service
[ 0.760092] Freeing unused kernel memory: 712k freed
[ 0.760552] Write protecting the kernel read-only data: 6144k
[ 0.761521] Freeing unused kernel memory: 60k freed
[ 0.768916] Freeing unused kernel memory: 784k freed
[ 0.773948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.824947] udevd[74]: starting version 173
[ 0.877923] SCSI subsystem initialized
[ 0.935196] libata version 3.00 loaded.
[ 0.956774] ahci 0000:00:1f.2: version 3.0
[ 0.956824] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.957043] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.957186] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.957352] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.957485] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.964648] scsi0 : ahci
[ 0.965831] scsi1 : ahci
[ 0.966239] scsi2 : ahci
[ 0.966607] scsi3 : ahci
[ 0.967366] ata1: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104500 irq 43
[ 0.967524] ata2: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104580 irq 43
[ 0.967680] ata3: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104600 irq 43
[ 0.967831] ata4: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104680 irq 43
[ 1.286817] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.286986] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.287140] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.287285] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.296743] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
[ 1.296845] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.306650] ata1.00: configured for UDMA/133
[ 1.307168] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
[ 1.361599] usbcore: registered new interface driver usbfs
[ 1.361788] usbcore: registered new interface driver hub
[ 1.362029] usbcore: registered new device driver usb
[ 1.362890] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.363254] sd 0:0:0:0: [sda] Write Protect is off
[ 1.363390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.363491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.371359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.371567] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.371722] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.371734] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.371971] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.393443] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.393567] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.397557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.397596] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40104000
[ 1.410069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.410565] hub 1-0:1.0: USB hub found
[ 1.410687] hub 1-0:1.0: 8 ports detected
[ 1.418573] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.420139] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.436350] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.436604] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.436912] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.436925] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.437083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.450137] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.450657] hub 2-0:1.0: USB hub found
[ 1.450776] hub 2-0:1.0: 2 ports detected
[ 1.451206] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.451346] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.451358] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.451506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.466851] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.467375] hub 3-0:1.0: USB hub found
[ 1.467491] hub 3-0:1.0: 2 ports detected
[ 1.467949] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.468100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.468111] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.468263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.476847] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.477389] hub 4-0:1.0: USB hub found
[ 1.477506] hub 4-0:1.0: 2 ports detected
[ 1.477926] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.478068] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.478080] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.478233] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.486815] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.487337] hub 5-0:1.0: USB hub found
[ 1.487454] hub 5-0:1.0: 2 ports detected
[ 1.720183] usb 1-4: new high speed USB device number 2 using ehci_hcd
[ 2.310090] usb 1-7: new high speed USB device number 3 using ehci_hcd
[ 3.346515] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.346624] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.481722] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 3.481844] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572970
[ 3.481970] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572968
[ 3.482041] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 923116
[ 3.482090] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572948
[ 3.482130] EXT4-fs (sda2): 4 orphan inodes deleted
[ 3.482225] EXT4-fs (sda2): recovery complete
[ 4.287281] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.547177] udevd[278]: starting version 173
[ 5.875278] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.875984] ACPI: AC Adapter [AC0] (off-line)
[ 5.881017] ACPI: acpi_idle yielding to intel_idle
[ 5.888339] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1
[ 5.939985] ACPI: Lid Switch [LID]
[ 5.940983] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2
[ 5.941147] ACPI: Power Button [PWRB]
[ 5.941583] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.941763] ACPI: Sleep Button [SLPB]
[ 5.942546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.942697] ACPI: Power Button [PWRF]
[ 5.943413] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.943529] ACPI: Thermal Zone [TZ01] (24 C)
[ 5.972400] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.972588] ACPI: Battery Slot [BAT1] (battery present)
[ 5.995124] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 5.995453] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 5.995846] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 5.999895] iTCO_vendor_support: vendor-support=0
[ 6.012373] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 6.124751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.125083] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
[ 6.125348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.190412] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.194157] tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 6.215082] Initializing USB Mass Storage driver...
[ 6.215469] usbcore: registered new interface driver usb-storage
[ 6.215586] USB Mass Storage support registered.
[ 6.267697] usb 1-7: USB disconnect, device number 3
[ 6.269402] Linux media interface: v0.10
[ 6.271745] scsi4 : usb-storage 1-7:1.0
[ 6.278594] usbcore: registered new interface driver ums-realtek
[ 6.324583] usbcore: registered new interface driver uas
[ 6.361274] Linux video capture interface: v2.00
[ 6.416800] uvcvideo: Found UVC 1.00 device USB Camera (5986:02a8)
[ 6.435626] input: USB Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
[ 6.435979] usbcore: registered new interface driver uvcvideo
[ 6.436094] USB Video Class driver (v1.0.0)
[ 6.516768] [drm] Initialized drm 1.1.0 20060810
[ 6.632026] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.657529] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.657663] i915 0000:00:02.0: setting latency timer to 64
[ 6.729787] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.729799] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.729904] [drm] Driver supports precise vblank timestamp query.
[ 6.805456] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.805960] [drm] initialized overlay support
[ 6.965295] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 7.013599] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 7.142190] fbcon: inteldrmfb (fb0) is primary device
[ 7.190534] Console: switching to colour frame buffer device 128x37
[ 7.197352] fb0: inteldrmfb frame buffer device
[ 7.197461] drm: registered panic notifier
[ 7.197660] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110316/video-1148)
[ 7.198144] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.198602] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 7.199927] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.736636] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.833668] EXT3-fs: barriers not enabled
[ 8.856596] kjournald starting. Commit interval 5 seconds
[ 8.859646] EXT3-fs (sda4): using internal journal
[ 8.862624] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 9.026943] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k
[ 18.281512] NET: Registered protocol family 10
[ 21.591928] EXT4-fs (sda2): re-mounted. Opts: commit=600
[ 35.750474] fuse init (API version 7.16)
[ 201.029607] PPP generic driver version 2.4.2
[ 3255.955029] EXT4-fs (sda2): re-mounted. Opts: commit=0
[10041.892469] usb 1-1: new high speed USB device number 4 using ehci_hcd
[10042.021338] scsi5 : usb-storage 1-1:1.0
[10043.026686] scsi 5:0:0:0: Direct-Access TOSHIBA MK1234GSX PQ: 0 ANSI: 2
[10043.031863] sd 5:0:0:0: Attached scsi generic sg1 type 0
[10043.036190] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[10043.041825] sd 5:0:0:0: [sdb] Write Protect is off
[10043.045147] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[10043.045157] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.052676] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.064806] sdb: sdb1
[10043.071939] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.075091] sd 5:0:0:0: [sdb] Attached SCSI disk
[10089.898154] EXT3-fs (sdb): error: can't find ext3 filesystem on dev sdb.
[10089.913066] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
[10089.936439] FAT: invalid media value (0xb9)
[10089.939320] VFS: Can't find a valid FAT filesystem on dev sdb.
EDIT: ls -l /etc/modprobe.d
total 16
-rw-r--r-- 1 root root 30 Ago 4 04:57 blacklist_net.conf
-rw-r--r-- 1 root root 182 Ago 4 04:57 blacklist_sound.conf
-rw-r--r-- 1 root root 55 Jun 25 15:30 modprobe.conf
-rw-r--r-- 1 root root 196 Abr 8 11:08 usb-load-ehci-first.conf
Thanks in advance for any help.
Last edited by JohnTH (2011-08-04 16:31:18)

The kernel outputs many error messages when I start NetwrokManager, and persists even when I stop it
Here is part of a dmesg:
[ 587.134444] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 587.135365] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 587.136337] HW_VAR_MRC: Turn on 1T1R MRC!
[ 587.553458] pwrdown, 0x6(BIT6)=f1
[ 589.566485] pwrdown, 0x6(BIT6)=f1
[ 591.573163] pwrdown, 0x6(BIT6)=f1
[ 593.579828] pwrdown, 0x6(BIT6)=f1
[ 595.586517] pwrdown, 0x6(BIT6)=f1
[ 597.593183] pwrdown, 0x6(BIT6)=f1
[ 599.599777] pwrdown, 0x6(BIT6)=f1
[ 601.606490] pwrdown, 0x6(BIT6)=f1
[ 603.613185] pwrdown, 0x6(BIT6)=f1
[ 605.619843] pwrdown, 0x6(BIT6)=f1
[ 607.626506] pwrdown, 0x6(BIT6)=f1
[ 609.633150] pwrdown, 0x6(BIT6)=f1
[ 611.639785] pwrdown, 0x6(BIT6)=f1
[ 613.646491] pwrdown, 0x6(BIT6)=f1
[ 615.653171] pwrdown, 0x6(BIT6)=f1
[ 617.659839] pwrdown, 0x6(BIT6)=f1
[ 619.666513] pwrdown, 0x6(BIT6)=f1
[ 621.673175] pwrdown, 0x6(BIT6)=f1
[ 623.679774] pwrdown, 0x6(BIT6)=f1
[ 625.686507] pwrdown, 0x6(BIT6)=f1
[ 627.693176] pwrdown, 0x6(BIT6)=f1
[ 629.699826] pwrdown, 0x6(BIT6)=f1
[ 631.706480] pwrdown, 0x6(BIT6)=f1
[ 633.713169] pwrdown, 0x6(BIT6)=f1
[ 635.719785] pwrdown, 0x6(BIT6)=f1
[ 637.726499] pwrdown, 0x6(BIT6)=f1
[ 639.733146] pwrdown, 0x6(BIT6)=f1
[ 641.739824] pwrdown, 0x6(BIT6)=f1
[ 643.746489] pwrdown, 0x6(BIT6)=f1
[ 645.753149] pwrdown, 0x6(BIT6)=f1
[ 647.010241] pwrdown, 0x6(BIT6)=f1
[ 647.135295] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 647.136216] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 647.137240] HW_VAR_MRC: Turn on 1T1R MRC!
[ 647.753447] pwrdown, 0x6(BIT6)=f1
[ 649.766491] pwrdown, 0x6(BIT6)=f1
[ 651.773160] pwrdown, 0x6(BIT6)=f1
[ 653.779830] pwrdown, 0x6(BIT6)=f1
Can somebody help me?

Flash won't open (unexpected quit) after system reinstall from Time Machine

After purchasing a new machine, I reinstalled everything from my Time Machine backup, including all applications. Now Flash CS4 gives me "unexpected quits" every time I try to open it. Flash CS3 opens though. I deleted the prefs file and it still won't open.

I have/had a similiar problem. What I did was reset the SMC and PRAM. You can also do a safe boot. For the PRAM, I had to do three times, and my computer finally booted up. Afterwards I verified my disk and repaired my permissions. So far so good. I guessing that Spotlight needed to re-index the system.
http://support.apple.com/kb/ts2570

How do I recover files from a Time Machine backup after a clean system reinstall?

I had a really funky problem with my Japanese input that is too weird (and irrelevant at this point) to go into here. The gist is that I took my 13-inch, Mid-2012 MacBook Air to the Apple Store in Osaka, and one of their geniuses told me he couldn't isolate the cause and that the only solution was to do a complete reinstall. Of course, I had backed up my whole disk to my Time Capsule before going to the store. The problem is, I cannot do a straight backup, because that will simply bring back the unsolvable problem.
I got the MacBook Air home and used the moving assistant utlity (sorry, I don't know the English name for it since my system's in Japanese) to resinstall all my applications. So far so good. The problem is, I have no idea how to get my files, photos, music, and movies from the Time Capsule into my new account. I didn't see any option for that when I ran the moving assistant utility, and I absolutely do not want to resinstall anything from the old Library Folder.
When I go into Time Machine mode, pinks lines on the right side of the screen indicate that Time Machine has all my old backups there, but when I try to navigate to them, I get only an empty black window. I assume that's because Time Machine does not recognize my old account and new account as the same account (and indeed there is no reason at this point that it should, since I don't know how to link them).
Any help would be very much appreciated.

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

Hard drive and system recovery question - "No boot device"

I replaced a 320Gb - 5400 rpm drive that failed with a 750Gb - 7200 rpm drive. Using the HP System Recovery disks to reload the OS, once it goes through the restoration process the mb doesn't seem to recognize the hard drive and I get the "No Boot device" message upon rebbot. Unfortunately, the BIOS is not the best and it won't allow me to see if it actually recognizes the new hdd, which I suspect it doesn't - even though the Recovery Manager seems to . Either that or I have a bad MB.
Sytem information - HP G71-340US
Processor - 2.20 GHz Intel Core2 Duo Processor T6600
BIOS - InsydeH20 3.5
So even though Recovery manager *appears* to be installing W7 just fine, but it's a no go when it's time to actually boot to it, what is the problem? Is this a mb issue or did I just buy the wrong hd?

Well, a few reboots later and it seems the issue is no longer the mb or the hd. W7 is having a tough time though, and am now working on the second system restore, this time from the recovery partition, to try and get it to load fully. When I reinstalled from the System Recovery DVD the second time through, I skipped installing the third (driver) disk and that appeared to help. Just wish I could get the OS to comply. Maybe the third time will be a charm?

How to restore missing bookmarks icons after system reinstall?

After reinstalling my system (Win 7 x64) and downloading the latest Nightly build of Firefox, logging in to Sync and syncing my bookmarks, I discovered that the icons are missing (white square with gray outline). After visiting a web page, the icon is set back to normal. The problem is, that I have lots of bookmarks, and it would take an enormous amount of time to visit every page. And on the second hand, with icons its easier to access bookmarks.

I don't think you can, you'd have to revisit every website.

System reinstall question

Similar Messages

Maybe you are looking for