SYSTEM REQUIREMENTS FOR LOGIC STUDIO-upgrade from LOGIC PRO 7

I have been using LOGIC PRO 7 on my G5 1.8ghz Power PC G5 with 768 MB DDR SDRAM with no problems. I'd LOVE to upgrade to the new 8. I notice it said minimum req is 1.25ghz and 1gig of ram.
Will I be able to run this on my current system for basic recording, etc. Do I REALLY need the 1.25 and 1 gig of ram? If i'm doing no more than 8 tracks live at a time-live instruments?

Hi Mikey, First off they mean a G4 1.25 or faster. Your G5 1.8 should be fine. Second, the 768MB of RAM will be an issue. Fortunately RAM for your machine isn't that expensive. If I were you I'd load up with as much as you can. It will help you in all aspects of your computing, not just Logic. Check out the link below for some options.
http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=183&type=Memory&TI=0552&shoup grds=Show+Upgrades
Stootka
P.S. I am in no way affiliated with the retailer in the link, it's just the first place I thought of. You may want to search on a few more to shop for the best deal.

Similar Messages

  • System Requirements for FCP Studio 2

    System Requirements for FCP Studio 2
    I would like to find out if this system configuration would work with FCP studio 2
    • Processor: 2.66 GHz
    • Memory: 2GB
    • Hard Drive: 250GB
    • Graphics: NIVIDIA GeForce 7300 GT 256MB SDRAM
    • Is the Fibre Channel card, the card that they refer to in the NOTE below that I will need because the integrated Intel graphics processor is not compatible with FCP? Or is the PCI card one of the the NIVIDIA cards?
    "NOTE form website:
    "An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)"
    • Fibre Channel Card: Dual Channel PCI Express Card
    I was told that I don't need this card and would like to confirm that with someone who actually works with FCP.
    Advice would be appreciated.
    G5   Mac OS X (10.4.9)  

    You don't need a fibre channel card unless you need fibre channel connectivity, e.g. to a high speed disk array. If you're on Firewire drives (for example) you don't need one.

  • Please help~~ about secondhand logic studio upgrade from express

    i bought a logic studio 8 from ebay, its upgrade from logic express 7. the seller send me full package of logic studio 8 upgrade and one license label of the logic express 7 which stick on the license sheet of the logic studio 8. i did not get the full package of the logic express 7 but only get one license label of logic express 7. can i use this package of logic studio upgrade in my studio ?
    the seller sell all the s/n for me include the license of express 7, but i only get the license label of express 7, is it enough to own the license of this logic studio ?

    I'm afraid you may have to take this up with the seller, as it seems he didn't deliver what was listed for the bid. Because we are now on Logic 9, I'm unsure as to the effectiveness of updating past iterations of Logic. If all else fails, contact Ebay and/or Apple support.

  • Logic Studio (upgraded from express 7.2) on a laptop and tower??

    Hi. I had Logic Express 7.2 and bought and installed the upgrade to Logic Studio on my MacPro Tower.
    I am buying a MacBook Pro and would like to install Logic Studio on that, as well. I understand that the license for Logic Studio allows one tower and one laptop. Does that still apply in my case for the upgrade to Logic Studio? i.e., will I have to first install logic express 7.2 on the laptop then "upgrade" to Studio, or can i just install Studio on the macbook pro and run it on both machines? Hope that all made sense!!
    Thanks,
    Rob

    You don't have to install Logic Express on your MacbookPro. Simply install Logic Studio. After you type your Logic Studio upgrade serial number, Logic will ask you for your original Logic Express serial number

  • Install logic 9 upgrade from logic 7  on macbook pro retina

    i bought a new MBP retina, (no disc drive) and want to install logic. my logic studio 9 is an upgrade from logic pro 7, and the 7 won't run on the new com.
    So how do I do this install?

    Could be you khave a corrupted Win 7 install file/files.
    Try downloading the Win 7 ISO for the version you have from here.
    http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit- direct-download-links/
    Then burn that ISO to a USB or DVD, USB would be better.

  • Basic Question Solaris SPARC required for 10.2 upgrade from 9.2

    We are running Oracle 9.2 releases on Windows and Solaris SPARC 2.6
    SUN 450 Dual UltraSparc II
    Where can I find system and OS requirements for Solaris for Oracle 10.2
    database? I have looked in many different install guides and they all
    reference Solaris 10 but don't say whats required.

    You find this information here:
    http://www.oracle.com/technology/support/metalink/index.html
    For 10g at least you need Solaris 2.8
    Werner

  • What are the requirements in terms of system drive for visual studio 2013

    According to this thread "visualstudio.uservoice.com/forums/121579-visual-studio/suggestions/2120283-allow-users-to-install-entirely-to-another-hard-dr"  it is not possible to install visual studio fully on another drive rather that
    the system drive. This link "visualstudio.com/products/visual-studio-professional-with-msdn-vs#Fragment_SystemRequirements" states the system requirement for visual studio pro 2013. However can somebody clarify what is needed in terms of system drive
    requirement e.g. out of the 20 gb, how much is needed on the system drive.
    Thanks

    Hi,
    Exact space required will vary widely based on installation components chosen and what you may have already installed on your system.
    And When you install your VS in another Drive and run the VS installer, you can see system requirement in installation screen.
    Because my work computer only have C Drive, I test the VS2012 professional installation in my home computer E drive. The Screen below:
    I think the system requirement can also display when you install  VS 2013.
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

  • Problems upgrading from Logic 6.4 to Logic Studio

    I recently had my hard drive die, so i am now in the process of reloading all my software.  I started with Logic 6.4 years ago and have been purchasing the upgrades ever since. I first installed Logic 6.4 with the dongle inserted than i installed Logic studio. I than updated the software.  However, now Logic will not open. I get the prompt;
    "Upgrading from Logic 6.4 to Logic Studio running 10.6.7 2.66 i7 17 inch running  problem. After install Logic will not open. Updated all the software. On a Macbook Pro"
    Is there something i'm doing wrong.
    thanks for any help.
    David

    Choose About this Mac from the Apple menu, check if the computer has at least 2GB of RAM, and if it does, click here and order a download code for Lion 10.7. Doing this costs money; you may find it easier and cheaper to upgrade to Yosemite, which is free.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (122702)

  • Can I upgrade from Logic 7 to Logic Studio (Logic 9)?

    Can I upgrade from Logic 7 to the new Logic Studio (Logic 9)? Or do I need to purchase the Logic 8 upgrade first?
    Thanks in advance.

    Get the 9 upgrade, no need for 8 first.

  • I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I requ

    I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!

    If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

  • Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

    I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

    Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
    ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

  • HT5794 I just upgraded from Logic pro 9 to  Logic Pro X on my computer, but all my EXS24 libraries are missing all of a sudden. How do i Get them back???

    I just upgraded from Logic pro 9 to  Logic Pro X on my computer, but all my EXS24 libraries are missing all of a sudden. How do i Get them back???
    I have checked both the resource folders, and made backups from Logic pro 9, but its not recognizing them, or saying that they're missing a bunch of samples.
    What do i do?

    Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple notes it is your responsibility to back up your purchases.
    Select the store on the left side of iTunes.
    Click on Purchased on the right side under Quick Links.
    You can re-download your available previous purchases.

  • Final Cut Studio & Logic Studio upgrade issue

    I am mainly audio based but have been working on projects more recently with Final Cut Studio 2 to deal with the video. As I use both Logic Studio 8 and Soundtrack Pro 2 a lot, and Final Cut Pro less, I plumped for the upgrade to Logic Studio which also contains STP 3 and Compressor 3.5 which seemed the right thing to do.
    However the install info and dvd doesn't want you to install STP 3 or Compressor 3.5 if you have Final Cut Studio 2 as they "contain updated components that are incompatible with Final Cut Studio 2 or earlier. If the Logic Studio installer detects Final Cut Studio 2 or earlier on your system, it automatically deselects the checkboxes for Soundtrack Pro and Compressor in the Custom Install pane."
    Personally I didn't want to run to the expense of upgrading Final Cut as I don't use Motion, Colour or Cinema Tools and although I am working heavily in DVD Studio Pro they haven't done anything to upgrade that application (boo!)
    So what's the deal? Am I unable to upgrade ST Pro to version 3 and also unable to benefit from the upgraded Compressor even though I've actually paid for an upgrade that promised me these options, and no mention until I'd opened the package that there would be any incompatibility issues with Final Cut Studio 2!
    Anyone know what these 'incompatible components' are?
    Sounds like sharp practice and bad product integration to me...

    I just spoke with someone in Apple Reseller Channel Sales and he told me that what is shipping now is strictly the Universal version. So, if you order a Final Cut Studio Upgrade from FCP HD ($699 retail, IIRC), you will receive the FCS Universal version in the big box with all the docs.

  • Upgrading from Logic 7 Academic to 8 re:passwords & serial numbers

    Today I bought the Logic 8 upgrade from the Apple store. When I tried to run the upgrade procedures
    it asks for the Logic 7 Academic serial number. All I can locate is the XSKey Serial number and when I enter it says it is invalid. Is there another serial number hidden somewhere so I can get up and running on Logic 8?
    Thanks

    There are several ways to answer your post - let me have a go at three:
    1) The serial number for Logic 7 is on the front of the "Installing Your Software" booklet that came with Logic 7
    2) The normal installation process for Logic Studio allows for either serial number to be entered or for your XSKey to be plugged in, though several people have reported problems with this. Search the forums for "serial number" and you'll find plenty of posts like your own.
    3) Your main concern, however, should be that you may not be eligible for an upgrade. Logic 7 Academic is (at least in the States) not a valid upgrade path to Logic 8. You have to buy a new licence and that means paying full price unless you still qualify for academic pricing. That ruling does not seem to apply worldwide and I've even heard of people in the States who have been able to upgrade from an Academic Logic 7 licence to Logic 8. SOmetimes they had a non-academic licence number, sometimes they had a non-academic XSKey. I did hear of someone who bought an upgrade as you did who was able to get their money back but there's no guarantee.
    If you fall foul of number 3, don't shoot me - I'm only the messenger ;o)
    Pete

  • Upgrade from Logic Express to the new Mac App Store Logic Pro?

    Hey there,
    So I recently bought Logic Express, thinking that sometime in the future I might want to upgrade to Logic Studio. Today Apple announced that Logic Pro is available in the Mac App Store for $200! Is there a way to upgrade from Logic Express to this version?
    Thanks,
    Alan

    I´m  from Mexico I Saved Money for one year (2010) only for buy "Logic Express" and 2011 I´ve saved money again for Up to Logic Pro. I dont want to turn me a piracy
    Complementos de efectos disponibles sólo con Logic Studio
                Space Designer (reverberación por convolución)
                Delay Designer
                Match EQ
                Linear Phase EQ
                Limitador adaptivo
                Multímetro
                Multipressor (Logic Express incluye únicamente una versión predefinida)
                Loopback (sólo disponible desde MainStage)
                Postprocesador binaural
                Downmixer
                Ganancia multicanal
                Compresor surround

Maybe you are looking for

  • Facetime window will not close. (iPhone 6 iOS 8.1.3)

    Recently and quite frequently, after a FaceTime call has ended the window will not close out to the normal FaceTime call history screen. Even when I double tap the home button to close out apps, the FaceTime window, still showing my live face and "ca

  • Error occured while starting the listener

    i have encountered a problem when starting with lsnrctl C:\Documents and Settings\rajesh.parepalli>lsnrctl LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 25-SEP-2007 15:22: 06 Copyright (c) 1991, 2002, Oracle Corporation. All rights re

  • Search not working in ATG CSC 10.2`

    am getting an error as .. 10:27:49,092 ERROR [AgentSearchTools] atg.search.client.SearchClientException: Unable to resolve: /atg/search/routing/RoutingSearchService please help me.

  • Horizon 2 Multiple Monitor Connection

    Recently purchased a Horizon 2 all-in-one. I am attempting to connect a tv as a second monitor but am having trouble. I have tried HDMI to HDMI as well as HDMI to VGA conversion. Windows key + P gives options for projected display, but clicking on an

  • Problems html5 output smart interaction in Captivte 8

    Hi community, I have a problem with Captivate 8 When I publish smart interaction like Word Search they run perfect in swf. But when I watch the html5 output most of the interactions are placed on the top left corner and not at the position where I wa