System Restore - and everything goes kaput...
Hey guys,
I recently got my computer repaired, with a hard drive replacement. Of course, this means I don't have purchased music on the computer anymore.
HOWEVER, I do have it on my iPod. Now, I have disk usage enabled, but greyed out in the summary section; and I can't find any folders with my iPod library on it in Explorer.
Is there any way I can put the purchased music back on to the PC?
Thanks!
Owen Edwards
If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
For all other non purchased music (your own CDs etc) try this method which works on some Windows PCs.
Enable your iPod for disk use.
See: iPod Disk Use.
Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
The music files should transfer to your iTunes.
If this doesn't work (and it may not because officially it's not supposed to), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
Similar Messages
-
HI THERE,
CAN SOMEONE PLEASE HELP ME? I HAVE BEEN TRYING TO RESTORE MY IPHONE4 FROM IOS 4.3.3 TO 5.1.1 FOR THE LAST 6 HOURS AND EVERYTHING GOES THROUGH OK UNTIL IT GETS TO THE RESTORING IPHONE SOFTWARE, IT LOADS 1/2 THEN FREEZES. IVE LEFT IT LIKE THAT FOR AT 30MINS AND NOTHING HAPPENS. IVE TAKEN THE CORD OUT AND HAD TO TURN PHONE OFF AND RESTART, THEN LOAD IT BACK UP TO ITUNES ALL OVER AGAIN. MANY TIMES!!!!! IVE CHANGED CORD AND USB STILL NOTHING? IVE GOTTEN TO THE POINT WHERE I MAY HAVE RUINED IT ALTOGETHER AND NEED TO BUY A NEW PHONE? PLEASE I HOPE SOMEONE OUT THERE CAN HELP?:
MANY THANKSYou may not get a response as you are shouting at everyone.
All caps indicates shouting, is considered rude, and is difficult to read.
Many will not read such posts.
Try turning off you caps lock and asking again. -
This began when business increased in January and our print jobs got big (printing invoices off the internet). It can print any small job no problem but if it's over 80 or so pages, it will stop and show a spooling error. I have done system restores and uninstalled firefox and then Internet Explorer will print the big jobs UNTIL I REINSTALL FIREFOX. Then the problem resurfaces whether using firefox or IE!!! Why?! I don't care why - how do I fix it? All 13 other computers use firefox and that is how my staff is trained. I hate IE.
-> '''Is my Firefox problem a result of MALWARE ??'''
* Popups Not Blocked - http://kb.mozillazine.org/Popups_not_blocked
-> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications (softwares) before Starting to Run Scans.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free Internet Security - http://www.lavasoft.com/products/ad_aware_free.php
Check and tell if its working. -
I accidently deleted QuickTime from my computer. Then I did a system restore and retrieved the program. Now Itunes can't find QuickTime and will not open.Is there a eazy fix for this without using my Ipod? Ihave 6K songs in Itunes that I can't get to.
Thank You
T-BILLHmmm. There's a couple of things that might be going on with that one.
Let's try an uninstall and reinstall of QuickTime first.
If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
http://support.apple.com/kb/DL837
Does your iTunes launch properly now? -
The difference between system restore and last good known configuration
hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.davidLast Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP -
Hi. Bought iwork family as a download rather than on DVD. Want to transfer to other macs in household. Apple told me to transfer to USB stick and then put on other macs. Doesn't work and get message saying "keynote cannot be opened due to a problem". Same problem for .pages and .numbers. I have reinstallled but same problem. Have checked system requirements and everything seems fine.Any one have any ideas how to solve this. Thanks
I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform. -
I have uploaded an old itunes library by mistake - any way that I can go back to my previous library. Unable to do a system restore and I don't know where to find an up to date music/playlist file. I was originally trying to recover a playlist that vanished after I had updated one of the ipads, did an online search, followed the instructions only to discover that I had loaded an itunes library from 2 years ago. Stupidly I thought that it had updated itself and didn't realise I had to do it. Any he
See Empty/corrupt iTunes library after upgrade/crash. Hopefully you have a more recent library file that you can restore.
tt2 -
I rest my iphone 4 now it told me to connect to itunes I did that it restored and everything but it still saying counted to itunes and my computer shows a error
iOS: Unknown error containing '0xE' when connecting to a Windows PC
iTunes: Possible iTunes Store errors
Resolve iOS update and restore errors
I don't see that error code in any of the apple support links. -
all my programs are opening in adobe even the system restore and the regisrty -
how do I reset all programs to their originall default programs.
Please help.
PS I have also tried starting in save mode and still have the same problem.Hi,
As
BurrWalnut mentioned, first please run a virus scan to eliminate virus infection (if AV program is not opened in adobe)
The files association could be corrupted in your situation, apart from the solution posted in the first reply, I also suggest you check Control Panel\All Control Panel Items\Default Programs\Set your Default Programs or Associate a file type or protocol
with a progra,, manually check the association and check if it can do some help.
Add: another way to open restore point is launching it in recovery console, please refer to this guide
http://windows.microsoft.com/en-hk/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7
Yolanda Zhu
TechNet Community Support -
I am trying to create a video of my desktop using Quicktime (10.0). I have no sound. I have checked my system preferences and everything looks good there. Why am I lacking sound on my video?
You might also post this question in the Quicktime forum https://discussions.apple.com/community/mac_os/quicktime
-
My iPad screen become black at times and everything goes away
My iPad screen is becoming black at times and everything goes again.takes a minute and comes back on.anybody knows what going on with it.help
iPad crash and reboot; you may want to try the following:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset -
What if there isn't a "Networkinterfaces.plist" in my system configuration and everything ends in ".bundles"?
Thanks
Oh I see, and what do I do with "Networkinterfaces.plist" once I've found it? -
Data recovery after system restore and corrupt user account.
A few months ago I was in the middle of a school assignment and my HP laptop started acting strange. I would try to move an image and a copy of it would remain in its place. I couldn't delete the picture either, but I could "cut" the image. Well,
I ended up restarting the computer and when I logged on it logged me into a temporary account because my account failed to log on. Not knowing exactly what was going on or what to do we ended up doing a system restore like a dummy and restarted the computer.
Well, when I logged back in everything was gone, all my school stuff was gone. What do I do can I get these back without having to pay a lot of money to do so? I am a single mother of two and there is no way I can afford anything.I'm assuming that, since this post is 2 years old, rachbutterfly81 has already moved on with her life. But, since this is the second time I've run into this problem, and this is the first time I've found a solution that worked, I thought I would add my two
cents. Of course I do agree that the original response was a little heavy for a mother of two, but it did work for me (with some slight variation that I will get to).
I definitely disagree with Mr. Malotte's statement that all her files were deleted by the system restore. She was obviously logged in under a temporary account, and so all her original files were fine and stored under the same location they always were.
There was no need for her to purchase additional software to "recover" her files when they were all there under her original account name. All she would have had to do to find her files (assuming she was running Windows Vista or 7) was to open her "C:" drive
and navigate to the "C:\Users\" directory and look for the folder with her account name.
Anyway, the first solution worked for me, BUT there is absolutely no reason to delete the original account folder as Magon suggests in step 3!
Simply rename it. Once you finish step 5 and delete the original registry key (I recommend backing it up by right clicking on the key and selecting export), there is no reason to reboot your machine. There are some additional steps to make
life a little easier though. I've added them to a modified version of the original:
1. If you know you have another administrative account you can use, go ahead and restart your PC to release the locks on your profile. If you don't have another account to use, you can create one by going to "Add or remove user accounts" in the control panel.
Select "Create a new account," name it whatever you want, check the Administrator box, and click "Create Account" (you may want to consider adding a password to this account as well). Now you can restart.
2. Log on with another administrative account
3. Rename your original profile to something different. For the sake of simplicity, we'll pretend it was called "myaccount." So, you would rename "C:\Users\myaccount" to "C:\Users\myaccount.original." It really doesn't matter what you name it, so long as it
is different than it was and you can still find it again.
4. Delete C:\Users\TEMP
5. Delete the registry key matching your SID from
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\ProfileList". Check the value "ProfileImagePath" to make sure you pick your own profile.
6. Log off and then log into your original account. Everything will still look messed up, like before, but it will not warn you that you are logged in under a temporary account.
7.While logged in, navigate to your user directory (not C:\Users\myaccount.original, but the current one you are logged in under, C:\Users\myaccount) and copy any files you see that say "ntuser" in them into your original profile directory (C:\Users\myaccount.original).
Most likely, you won't be able to see any, so you will need show hidden files. Hit
Alt on your keyboard, and you should see the menu bar appear. Select "Tools" and then "Folder Options". Select the "View" tab, and under "Hidden files and folders" check the option to "Show hidden files, folders, and drives." While you are
at it, uncheck the box next to "Hide protected operating system files."
8.Once you've copied the files over, go ahead and log out. You will need to log into your other administrative account once more.
9.Rename the new account (or delete it if you want), and rename your original account back to what it was (so "C\Users\myaccount.original" will be renamed to "C:\Users\myaccount").
10. Log out and now log in using your original account. Some things may not work as they originally did (for instance, I had to log into dropbox again and go through the setup process), but most things will. Most importantly, all your files should still
be there. -
I was wondering whether Firefox profile information is stored on a server. I use Windows Vista and recently did a system restore, wiping my hard drive after backing up my documents. Unfortunately I didn't realise that my Zotero library and notes were all stored inside the Firefox profile folder, which seems to have been deleted with everything else. Would any of my information have been stored on a server anywhere?
It is not. For future reference see https://support.mozilla.com/en-US/kb/Backing+up+your+information#Backing_up_your_profile
By default, your profile is stored in C:\Users\\AppData\Roaming\ Mozilla\Firefox\Profiles
Appdata by default is a hidden folder. You can show it by going to Organize | Folder and search options | View tab | Show hidden files, folders, and drives
Also see https://support.mozilla.com/en-US/kb/Backing+up+your+information#Restoring_a_profile_backup -
can you lose a skype contact after doing a system restore?
thank you.no. you can reinstall skype as many times as you like/as needed, but your contacts and everything else in your account will not be affected.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |
Maybe you are looking for
-
Developer 6.0 + Personal8i on NT
Does anyone have any instructions on how to set this combination up on NT, I have tried to set this up but can get the Listener to work properly. I have tried using instructions that use a machine that has TCP/IP but with no Hostname or domain, my ma
-
Folder being searched is included in search results & can be deleted!
I don't know if this is a new problem, but it was potentially dangerous in my case. I have a lot of log files with a specific extension in a folder mixed with a lot of other files. For examples sake, lets say .storage is the extension. The folder tha
-
Why are numbers appearing that aren't in my contacts?
When I start to type a name in the 'To' box while composing an SMS, my iPhone shows a drop down list of suggested numbers/contacts. One particular name triggers a contact that I have deleted. I cannot find it in the Contacts app at all when I check s
-
I have an Azure Service Bus setup with 2 queues in it: I then have some code which creates a client using a connection string and the accesses the Queue Name by a web config string. So, basically, on release my code will access the datasync queue, wh
-
Novell Client with NCS cluster behind firewall (IP filter)
I try to connect with Novell Client on Windows to a OES NCS cluster behind a firewall. Currently open ports are 524/tcp, 524/tcp, and 427/tcp for the Master IP Address and the virtual servers. This does not work. My first analysis shows that the clie