System restore but no need to restore external HD
I need to do a full restore from my Time Capsule (going to boot from Leopard install DVD, re-format internal drive and restore from Time Capsule).
How will the restore work with my external drive that I use for Movies? This external drive does not need to be restored, but is backed up along with my boot disk to the Time Capsule. When it comes time to restore, will Time Machine only restore the files to my newly erased and formatted internal HD, and ignore files in its back up that were from the other drive, or will it try and restore those too? If it does try and restore them, will it look for my external drive or will it chuck everything onto one drive?
Easybourne wrote:
I need to do a full restore from my Time Capsule (going to boot from Leopard install DVD, re-format internal drive and restore from Time Capsule).
How will the restore work with my external drive that I use for Movies? This external drive does not need to be restored, but is backed up along with my boot disk to the Time Capsule. When it comes time to restore, will Time Machine only restore the files to my newly erased and formatted internal HD, and ignore files in its back up that were from the other drive,
yes. full system restore utility on the leopard install DVD restores the system drive only. all other drives have to be restored separately while booted normally using TM interface.
or will it try and restore those too?
no.
If it does try and restore them, will it look for my external drive or will it chuck everything onto one drive?
Message was edited by: V.K.
Similar Messages
-
How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.
So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946 -
I am setting up an iPhone 5. I selected "set up as a new phone" but now need to restore from iTunes back up. How do I access the appropriate screen in the iPhone 5 which I am setting up?
The phone answered this for me - when I connected the iPhone5 to my computer it gave me a choice which included "restore from backup". Problem solved
-
my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info CSI 000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info CSI 000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info CSI 000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info CSI 000004d5 [SR] Verify completcannow detail I get this resultand this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir -
I restored, but I need an AC adapter.
My Ipod did not come with an AC adapter, but i had to restore it. After I finished restoring I got that icon that tells me I need to plug my Ipod into the AC adapter, but I dont have one. All I have is the usb cable that plugs it in to my Ibook. So now it is stuck there and i tried the Menu/Select reset thing and nothing seems to work.
What can I do?
Thanks in advance.Basically, you need to plug it in to the AC power adapter at this point.
All 4G iPods came with one... and they are required for a restore.
Do you know of anyone who could lend you an AC adapter?
Otherwise, you'll need to buy one. They're sold almost everywhere nowadays. -
I have lost all my information from my iphone.
I have backed it up but need to restore a previous back up.
Is this possible?????????i need to restore it from an earlier back up... is this possible???
It isn't an issue if you still have the backup, either on your computer or in the iCloud. You cannot restore to a backup that you have deleted. -
I remove my device from " find my iphone " but i need to restored
i remove my device from " find my iphone " but i need to restored
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Firefox 7 doesn't work with Angel Learning System email. I need to restore to Firefox 5.1
Continued from previous question. Error message is below.
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: http://mcgraw-hillangel.embanet.com/jscript/yahoo/utilities/utilities.js:9
This is the error message I receive every time I try to send emails through Community Care College. I need to restore to Firefox 5.1 and not have the program automatically update.You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
See also:
*http://helpdesk.oneonta.edu/xoops/modules/smartsection/item.php?itemid=167 -
My I pod touch is saying to connect to i tunes, I have connected it and press restore, it says it cannot restore as not connected to the internet but I am connected as I can get on other websites, help!!
Hello calthelly,
Thank you for providing all the information about the issue you are experiencing with iTunes. I found an article that addresses the specific error, "iTunes could not contact the iPod software update server because you are not connected to the Internet. Make sure your Internet connection is active and try again:"
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have found 2 versions of my old bookmarks in my backed up data. One is under Owner/AppData/Local.../bookmarkbackup/bookmarks-2011-10-13 , etc. The other is under Firefox Profile/Cache/E7C5F7B4d01. I don't find these places in the new Firefox program just installed.
Have you tried to drag the folder that contains your music files. Locate the folder, while iTunes is open, drag the folder to the Library icon, this may help.
-
Upgrade to iOS4, now needs Restored but wont let me restore! (Err 21?)
Hi there,
I hope someone can help as the Apple line is closed and I am travelling with my 7 week old son to Ireland tomorrow and at present have no phone!
I started to Sync my iPhone 3GS as usual and was asked to update to iOS4. No problem. Downloaded then iTunes started to do its thing with my iPhone. A few mins later an error message arrived that a duplicate file existed.
Tried to sync again but this time it would only let me press Restore. In my summary page on iTunes all note of my serial number, phone number etc were coming up as N/A.
On pressing restore, it tries extracting software, verifying with Apple, prepares ihone to restore then says:
The iPhone "iPhone" could not be restored. An unknown error ocurred(21).
From here it just takes me to a link saying update itunes if necessary, restart pc etc. baasically your usual options which have not helped.
I travel in 10 hours, cannot get to an Apple store before this and will have to fly without a phone to another country. Can anyone help with this problem? Many thanksMaybe try this. Check this thread or search with keyword "duplicate file" under iphone.
jhillestad
Posts: 126
Registered: Aug 12, 2006
New! iphone cannot be synced a duplicate file name was specified....
Posted: Jun 17, 2010 2:49 PM
Click to reply to this topic Reply email Email
After updating itunes to 9.2 I now get the message " The iPhone "iphone" cannot be synced. A duplicate file name was specified."
WHY!!!!!?????!!!!?
I am NOT running iToner so its not that! .
I knew I should have not updated I get burned every time.
Mac Pro Mac OS X (10.4.7) -
My ipod tocuh 5th generation battery died so i went to charge it and i would not charge so i did some reasearch and tried many steps such as hold down the buttons for a long time but nothing happened then i tried to restore it and it wont let it, it just comes up with error 1602 and ims cared i dont know what to do please HELP.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
I have tried all of the suggestions in this forum, taken it to the Geek Squad and our local Apple Rep, I was even on the phone with Apple Support for 2 hours last night and we could not get my phone to reboot. I am at a loss, any more suggestions?
restore error 4013
Is what i googled
https://discussions.apple.com/thread/5320142?start=15&tstart=0 -
So i don't know the password to my ipod and it's disbled. i also don't have a computer. What should i do? Is there a possible way i could unlock my ipod without losig=ng anything?
You maybe able to get the photos off the iPod by:
iOS: Importing personal photos and videos from iOS devices to your computer
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You will have to then restoe the iPod via iTunes. It may be necessary to place the iPod in Recovery mode to allow the restore. -
I have an iPhone 5S, with iOS 8.1.2 I am trying to do a system restore but the message I get on the desktop is that there is not enough room on the iPhone. How much room is required?
I had an important app. (Memos by bluemarblesoftware.com) that I accidentally deleted. It of course had many memos, some with quite a lot of information. I did sync my phone on a regular basis and I think the memos should be on the desktop computer. I tried to do a restore function but I got a message saying there was not enough room on the iPhone. How much room is needed?generally you need 1.90gb
what you can do is back up your phone to your computer before doing the update, just as a precaution.
Maybe you are looking for
-
Error While running the prgram in Second time..Frank Could u pls check this
Hi, I am using JDeveloper 11g. I have created a web application using ADF Business Components in JSF pages(Created the Bar Graph). When I am running the first it works fine. But when I try to run the second time it is giving some errors like Error 50
-
Macbook pro runs slowly even with tons of free memory??
Hi, I've seriously tried to follow everyone's advice on how to keep your Macbook running efficiently, even so I have serious problems with it. For one thing, Microsoft Office programs run more slowly on my Macbook Pro than they would on a PC from 199
-
Display the purchase order using plant & material in reports
Hi experts, i wanna print purchase order based on plant and material. in the purchase order i need date(cretion date of po) , po item, po num ,quantity , available quantity. i could not able to find the table in which date
-
Copy paste activity should be avoided.
Hi Freinds This has been discussed many a times in the forum and many members have already requested not to copy and paste the answers posted by other members. But, unfortunately it is not followed. Though many-a -times I have seen this copy paste ac
-
TP problems, transporting the query views
Hello Expert's I created two query views on the exiting querys, now i transporting the two views, How to do transfer the views, i am confusing following procedures, 1. In RSA1 -> Transport Connector ->Object types -> query views ->Two query views are