System Restore Fails

Hello all,I recently tried to do a system restore on my PC, and it is not wanting to work. My troubles first began when I couldn't find my bluetooth adapter in my Device Manager. Thinking it was a driver issue, I downloaded a driver from Microsoft. I was later told that if I downloaded a driver that wasn't from HP, it could cause my adapter to fail. I think the issue with my bluetooth was some services that I had previously disabled to free up CPU (I hadn't needd to use bluetooth in months). However, when I re-enabled services, the bluetooth adapter is still no where to be found. I tried uninstalling the newly installed driver, but no luck.
Given the current situation, I thought it would be best to restore my system back to before I messed with all the bluetooth drivers, etc. This is when the real problem has set in. I open system restore, choose a restore date, and system restore initializes. Ater going to the system restore page (default windows back ground and restore status) the computer reboots and gives me the following error:
The confusing part is that I am not currently running any antivirus. I have tried various restore dates, performing it in safe mode, perorming it from the "Repair Windows" menu, all with the same result. Has anyone ever encounted this issue before or know how to resolve it? Thanks,DH

Hi, The free version of Malwarebytes is on-demand only and shouldn't have any affect on System Restore, however the paid version will use realtime scanning, so it may well be worth temporarily disabling this. If you're using the free version of Malwarebytes, it may be worth checking if the previous McAfee instalation has been completely removed - a link to the McAfee Consumer Product Removal Tool can be found on the following link. https://service.mcafee.com/FAQDocument.aspx?id=TS101331 Regards, DP-K

Similar Messages

CS3 won't start after system restore, fails to reinstall

I am running CS3 design premium on Windows 8. I've have the computer (Lenovo with Intel i5) for two months, though I used the design suite on my previous computer. I had to run System Restore to fix a problem with Firefox, and after I did none of my Adobe products worked. I have uninstalled/reinstalled several times while following the Adobe Help page "error message at installation" guide. Each time I get the message that Acrobat installed correctly, and everything else "Component install failed." I also wiped everything Adobe off the program list (there were a few CC programs I had trialed, plus Flash Player and some plugins) ran the CC cleaner and still got the same error message. I even tried downloading the program files from Adobe in case there was a problem with my disk and that wasn't it either. I tried enabling FLEXnet and installing under a new user, each to no avail. Examining the log file found no instances of "Return value 3" and "FATAL." The search for "ERROR" found several items that I had either already tried or made no sense.
I ran the system restore again to an earlier point, and now I can't even uninstall anything. The CC cleaner tells me some files could not be cleaned, and I should close my browser and try again, but there are no browsers open. Restarted computer and tried again, same thing. It seems I've tried all the options.
Super frustrated.

Installation and Licensing Problems | Mylenium's Error Code Database
Read the part about the CS3 installer bug.
Mylenium

Entire system restore fails

Everytime I tried to do an ENTIRE SYSTEM RESTORE from TM it failed after a few seconds. I have formated the TM unit with 1 GUID partition as apple recommend and chose one of my internal hard drives as Time Machine unit. I'm just checking and comparing the TM usefulness for entire system restore matters.Can you help me, please?
Thanks in advance.

Then post or tell us something, like the last couple of dozen lines, or something >with a clue.
We're pretty good at figuring things out, but it's hard to pull something out of >thin air.
here is some log's lines:
Feb 4 17:42:21 localhost LCA[65]: Folder Manager is being asked to create a folder (cach) while running as uid 0
Feb 4 17:42:21 localhost LCA[65]: Folder Manager is being asked to create a folder (asav) while running as uid 0
Feb 4 17:42:21 localhost LCA[65]: Using keyboard layout 87
Feb 4 17:42:22 localhost LCA[65]: Found primary language hint "es"
Feb 4 17:42:24 localhost configd[41]: NetBIOS name (default) = MAC001F5B318E60
Feb 4 17:42:37 localhost configd[41]: NetBIOS name (default) = MAC001F5B318E60
Feb 4 17:42:43 localhost LCA[65]: Launching the Installer using language code "English"
Feb 4 17:42:43 localhost /System/Installation/CDIS/Mac OS X Installer.app/Contents/MacOS/Mac OS X Installer[162]: vm_allocate: 0, 0x200e2000 - 0x400e2000
Feb 4 17:42:43 localhost /System/Installation/CDIS/Mac OS X Installer.app/Contents/MacOS/Mac OS X Installer[162]: vm_protect: 0
Feb 4 17:42:43 localhost OSInstaller[162]: Mac OS X Installer application started
Feb 4 17:42:57 localhost OSInstaller[162]: Found receipt (full match) for (iPhoto / com.apple.pkg.iPhoto): (iPhoto / com.apple.pkg.iPhoto)
Feb 4 17:42:57 localhost OSInstaller[162]: Found receipt (name match) for (CPUUGmacpro / hwbe.pkg.018-3281): (CPUUGmacpro / hwbe.pkg.018-3277)
Feb 4 17:42:57 localhost OSInstaller[162]: Found receipt (full match) for (iPhotoContent / com.apple.pkg.iPhotoContent): (iPhotoContent / com.apple.pkg.iPhotoContent)
Feb 4 17:42:58 localhost OSInstaller[162]: Found receipt (full match) for (GarageBand_Instruments / com.apple.pkg.GarageBand_Instruments): (GarageBand_Instruments / com.apple.pkg.GarageBand_Instruments)
Feb 4 17:43:48 localhost OSInstaller[162]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Feb 4 17:43:48 localhost OSInstaller[162]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Feb 4 17:43:53 localhost OSInstaller[162]: Memory statistics for 'Select a Backup Source' pane:
Feb 4 17:43:53 localhost OSInstaller[162]: Physical Memory Allocation: 455 MB wired, 236 MB trapped, 46 MB active, 12 MB inactive, 5395 MB free, 5453 MB usable, 6144 MB total
Feb 4 17:44:25 localhost OSInstaller[162]: Memory statistics for 'Select a Backup' pane:
Feb 4 17:44:25 localhost OSInstaller[162]: Physical Memory Allocation: 456 MB wired, 232 MB trapped, 47 MB active, 13 MB inactive, 5396 MB free, 5456 MB usable, 6144 MB total
Feb 4 17:44:32 localhost OSInstaller[162]: Memory statistics for 'Select a Destination' pane:
Feb 4 17:44:32 localhost OSInstaller[162]: Physical Memory Allocation: 456 MB wired, 233 MB trapped, 47 MB active, 13 MB inactive, 5395 MB free, 5455 MB usable, 6144 MB total
Feb 4 17:45:51 localhost OSInstaller[162]: [RESTORE] need 101391048704 bytes to restore snapshot at path /Volumes/Macintosh HD3/Mac Pro de Felipe Molina AlsoÃÅ/2009-02-05-004911/Macintosh HD
Feb 4 17:56:29 localhost Unknown[206]: Launching the Installer Crash Log Viewer
Feb 4 17:56:43 localhost ReportCrash[205]: Process: Mac OS X Installer [162]
Feb 4 17:56:43 localhost ReportCrash[205]: Path: /System/Installation/CDIS/Mac OS X Installer.app/Contents/MacOS/Mac OS X Installer
Feb 4 17:56:43 localhost ReportCrash[205]: Identifier: Mac OS X Installer
Feb 4 17:56:43 localhost ReportCrash[205]: Version: ??? (???)
Feb 4 17:56:43 localhost ReportCrash[205]: Code Type: X86 (Native)
Feb 4 17:56:43 localhost ReportCrash[205]: Parent Process: LCA [65]
Feb 4 17:56:43 localhost ReportCrash[205]:
Feb 4 17:56:43 localhost ReportCrash[205]: Date/Time: 2009-02-04 17:56:12.694 -0800
Feb 4 17:56:43 localhost ReportCrash[205]: OS Version: Mac OS X 10.5.2 (9C2031)
Feb 4 17:56:43 localhost ReportCrash[205]: Report Version: 6
Feb 4 17:56:43 localhost ReportCrash[205]:
Feb 4 17:56:43 localhost ReportCrash[205]: Exception Type: EXCBADACCESS (SIGSEGV)
Feb 4 17:56:43 localhost ReportCrash[205]: Exception Codes: KERNINVALIDADDRESS at 0x0000000078a0006e
Feb 4 17:56:43 localhost ReportCrash[205]: Crashed Thread: 0
Feb 4 17:56:43 localhost ReportCrash[205]:
Feb 4 17:56:43 localhost ReportCrash[205]: Thread 0 Crashed:
Feb 4 17:56:43 localhost ReportCrash[205]: 0 libobjc.A.dylib 0x005a06ec objc_msgSend + 28
Feb 4 17:56:43 localhost ReportCrash[205]: 1 com.apple.AppKit 0x00d76126 -[NSApplication run] + 892
Feb 4 17:56:43 localhost ReportCrash[205]: 2 com.apple.AppKit 0x00d4330a NSApplicationMain + 574
Feb 4 17:56:43 localhost ReportCrash[205]: 3 com.apple.MacOSXInstaller 0x00005335 0x1000 + 17205
Feb 4 17:56:43 localhost ReportCrash[205]: 4 com.apple.MacOSXInstaller 0x00001fa2 0x1000 + 4002
Feb 4 17:56:43 localhost ReportCrash[205]:
Feb 4 17:56:43 localhost ReportCrash[205]: Thread 1:
Feb 4 17:56:43 localhost ReportCrash[205]: 0 libSystem.B.dylib 0x003a6bce _semwaitsignal + 10
Feb 4 17:56:43 localhost ReportCrash[205]: 1 libSystem.B.dylib 0x003fd1a9 sleep$UNIX2003 + 63
Feb 4 17:56:43 localhost ReportCrash[205]: 2 com.apple.installframework 0x0017423f dologwatch + 65
Feb 4 17:56:43 localhost ReportCrash[205]: 3 libSystem.B.dylib 0x003d0c55 pthreadstart + 321
Feb 4 17:56:43 localhost ReportCrash[205]: 4 libSystem.B.dylib 0x003d0b12 thread_start + 34
Feb 4 17:56:43 localhost ReportCrash[205]:
Feb 4 17:56:43 localhost ReportCrash[205]: Thread 2:
Feb 4 17:56:43 localhost ReportCrash[205]: 0 libSystem.B.dylib 0x0039fa46 semaphoretimedwait_signaltrap + 10
Feb 4 17:56:43 localhost ReportCrash[205]: 1 libSystem.B.dylib 0x003d1daf pthread_condwait + 1244
Feb 4 17:56:43 localhost ReportCrash[205]: 2 libSystem.B.dylib 0x003d3633 pthreadcond_timedwait_relativenp + 47
Feb 4 17:56:43 localhost ReportCrash[205]: 3 com.apple.Foundation 0x01aca4fc -[NSCondition waitUntilDate:] + 236
Feb 4 17:56:43 localhost ReportCrash[205]: 4 com.apple.Foundation 0x01aca310 -[NSConditionLock lockWhenCondition:beforeDate:] + 144
Feb 4 17:56:43 localhost ReportCrash[205]: 5 com.apple.Foundation 0x01aca275 -[NSConditionLock lockWhenCondition:] + 69
Feb 4 17:56:43 localhost ReportCrash[205]: 6 com.apple.installframework 0x00134347 +[IFDTargetController(WorkerThread) _handleTargetRequests] + 1090
Feb 4 17:56:43 localhost ReportCrash[205]: 7 com.apple.Foundation 0x01a845ad -[NSThread main] + 45
Feb 4 17:56:43 localhost ReportCrash[205]: 8 com.apple.Foundation 0x01a84154 _NSThread__main_ + 308
Feb 4 17:56:43 localhost ReportCrash[205]: 9 libSystem.B.dylib 0x003d0c55 pthreadstart + 321
Feb 4 17:56:43 localhost ReportCrash[205]: 10 libSystem.B.dylib 0x003d0b12 thread_start + 34
Feb 4 17:56:43 localhost ReportCrash[205]: Thread 0 crashed with X86 Thread State (32-bit):
Feb 4 17:56:43 localhost ReportCrash[205]: eax: 0x1e224b00 ebx: 0x01a7fbfb ecx: 0x0063c394 edx: 0x00810032
Feb 4 17:56:43 localhost ReportCrash[205]: edi: 0x78a0006e esi: 0x00819b30 ebp: 0xbffffa18 esp: 0xbffff8a4
Feb 4 17:56:43 localhost ReportCrash[205]: ss: 0x0000001f efl: 0x00010206 eip: 0x005a06ec cs: 0x00000017
Feb 4 17:56:43 localhost ReportCrash[205]: ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
Feb 4 17:56:43 localhost ReportCrash[205]: cr2: 0x78a0006e
Feb 4 17:56:43 localhost ReportCrash[205]: 0xfffe8000 - 0xfffebfff libobjc.A.dylib ??? (???) /usr/lib/libobjc.A.dylib
Feb 4 17:56:43 localhost ReportCrash[205]: 0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib
Feb 4 17:56:43 localhost ReportCrash[205]:
Feb 4 17:56:43 localhost ReportCrash[205]:
Feb 4 17:56:49 localhost Viewer[207]: Folder Manager is being asked to create a folder (asav) while running as uid 0
Feb 4 18:00:57 localhost Viewer[207]: installAutoFSMonitor: open failed
Feb 4 18:00:57 localhost Viewer[207]: TaskLauncher::Launch Failed

Photosmart Premium C309a series: full system restore fails to result in HP Scan functioning

I had to recently have my iMac hard drive replaced. Upon performing a full system restore from a Time Machine back-up, I have found that HP Scan fails to operate at all, despite the printer itself performing its other tasks normally. This means that ABBYY Fine Reader also fails to operate with HP Scan as its 'calling application'.
I am using Mac OS X 10.6.8 and have run Apple Software Update and downloaded all outstanding HP software. Prior to my hard drive failure HP Scan worked fine. The full restore has installed the version I was running then as now, 2.4.1.
In order to obtain the Scan software obviously I originally downloaded the full software package from HP in order to configure its functions -however the current printer driver version is 4.1.2.
From the Error window that appears when I try to launch HP Scan, it appears that the problem may relate to HP Scan profiles not being loaded in the Library folder. However when I look there I am not able to determine if anything is missing. I suspect that they are there, but not being recognised.
As I already have all the software to operate the printer functions, why should I repeat the download to get HP Scan and the scanning function to operate again?
This question was solved.
View Solution.

Hi @MJM_archiver,
I see by your post that you had to replace the hardrive and after doing a full system restore from the Time Machine back-up, you are unable to scan. I can help you with this.
Try scanning through the Apple Software, to see if you have the same result.
How to Scan: Mac OS X v10.6.
The files might not have copied over properly from the back up.
I would verify and repair the disk permissions, reset the printing system on the Mac, then run the full uninstall and reinstall of the software.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Uninstalling the Printer Software.
HP Photosmart Full Feature Software and Drivers - Mac OS X v10.4, v10.5, and v10.6.
Test the printer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows 8 System Restore Fail

Laptop: Lenovo Ideapad S210
The initial OS of my laptop is Windows 8 then I decided to upgrade it to Windows 8.1. The problem is every time I open an app from Windows it crasher. Heck, I can't even open the Windows Store or PC Settings!! So I decided to restore it from my backup with
an WSI file using the Lenovo Onekey Recovery Tool. However, as the recovery is in progress, the power went off!! Now I have a bricked Laptop. I can still go into the BIOS. I enabled the Legacy support and I tried to boot Windows 8 from USB flashdrive to try
to reformat. The boot was successful but I can't install the WIndows 8, I can't refresh or reset my PC either.
I tried one of the tutorials in a forum
http://www.techsupportalert.com/freeware-forum/system/12932-fixing-boot-problem-in-windows-8-1-a.html
but I'm not quite sure about what options to do. I tried the bootrec /Rebuildbcd but it says "the requested system device cannot be found"
HELP PLEASE!!

Hi,
How about your propblem now? I'm agree with britishdhez's opinion, it would be better to make system reset using OEM built in recovery disc. Contact Lenove would be more effective.
If you need any further help, you can also let us know.
Roger Lu
TechNet Community Support

System restore. failed driver install

Was having issues with the laptop so decided to do a full factory reset using the built in windows HP recovery. This failed so then used the recovery discs provided and worked to a point.
Formats OK, copies files OK, asks for the driver discs and does that (appears so) OK. Reboots and installs windows then HP software and drivers. What seems to be forever system reboots and then tells me its failed due to no drivers.
I have attempted this now 4/times with same result. These discs were provided by HP as my drive failed previously so should be the correct discs. This is the only HP machine and the only HP discs I have ever had.
Currently the machine is useless, unable to do anything. No way to get to desktop to manually install drivers after. Very annoying to say the least

Test the hard drive and memory modules, run the extended and quick tests, post back any errors or messages
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00439024&tmp_task=solveCategory&cc=us&dlc=en&la...

SFC and System Restore errors on Surface Pro 3 running Win 8.1

Yesterday evening, my boss sent me an email complaining about problems mapping network drives (Server 2008r2) and connecting to the office LAN after setting up offline files. He tried troubleshooting to no avail. I suggested SFC.exe and/or a systems
restore. However neither one worked.
System restore failed to extract file C:\Users\...\local\Packages\microsoft.windowscommunicationsapps_8v from the restore point.
Unspecified error (0x8007045b)
SFC.exe /scannow does report that it found errors, but could not fix them. I have a CBS.log file that I could post somewhere...
All this on a Surface Pro 3 running Windows 8.1
James A. Helfer | COMPUTER SYSTEMS ADMINISTRATOR WTW ARCHITECTS | PITTSBURGH PA

Stumped here. System restore reports same
C:\Users\...\local\Packages\microsoft.windowscommunicationsapps_8v from the restore point.
Unspecified error (0x8007045b)
SFC 3x squeaky clean
DISM /Online /Cleanup-Image /RestoreHealth reported success. Still same issue - unable to do any system restore from any restore point.
(trying to restore because suddenly Miracast went off to a parallel universe on my SP3..)
--I've run SFC and DISM multiple times. Neither find any errors. I'm stumped--
and Volume Shadow Copy Service is running...
-- Barb Bowman

Problem system restoring my hp laptop

i wanted to system restore my laptop and i didnt back up my files, now its saying that the syetem restored failed. i keep retrying and nothing works. i put the laptop in safe mode then sytem restored it and still nothing. keeps saying restore failed. please help.

Hi @matthewr4891 ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and errors when try to do a system restore. When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices as these could cause system restore to fail.
If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens.You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
Here is a document on system restore issues for Windows 7. Here is a document for Windows 8.
Each of these documents have what to do when system restore fails.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please include which Windows version you are using.
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

Metro fails completely after system restore - can no longer access either Metro or Metro Apps

Following a system restore, Metro no longer works - The windows button on the keyboard does nothing and clicking the start icon doesn't do anything either. Attempting to start Metro Apps results in failure - they cannot display on the screen and I see the
outline flash up briefly, then the app crashes. All non-metro programs work fine and aside from Metro, there are no problems.
How can I re-install Metro or solve the issue? This seems a pretty major failure in the preview - If Metro fails it causes major disruption - kind of like it used to be when explorer.exe failed. No menus, no access to system functions - updates etc.
Any suggestions? How can I re-install ( or fix ) Metro without having to scrap the entire OS and rebuild from scratch?
I thought the store beta not working was a major problem, but it's nothing compared to this.
Rolling back the system restore, or choosing another restore point does not correct the problem -
Thanks
David

Hi,
Are you using the built-in administrator account? Have you tried to create another user account then check whether the issue persists?
You can follow the steps below to troubleshoot this issue:
Run wsreset.exe to clear the Windows store cache.
Re-register the Windows store apps by the following guide (also applies to Windows 10 Technical Preview):
http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx
If you're using the built-in administrator, then please navigate to control panel\Administrative Tools\Local security policy\Local policies\Security Options\User Account Control: Admin Approval Mode for Built-in Administrator account, enable this option,
then run gpupdate /force to update the policy, logout then login again to check the result.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Yoga 13 System Image Restore Fails Due To Excluded Disk

Hello:
I am trying to execute a restore from a system image disc created shortly after I installed my principal programs without destroying the OKR partition or files. However, I do not want to go all the way back to factory condition at this time. The issue is that when I attempt to follow the reimage instructions in win 8.1, I am presented with a dialog box that has two check boxes. The first asks "Format and repartition disk" and the second asks "only restore system drives".
Based on everything I've read about preserving the C:/ and D:/ drive partitions, I would have expected to check the second box and not the first. But the system will not let me make this choice. Instead, the first box is automatically checked, and greyed out, with a second dialogue asking me if there are any disks I want to exclude from repartitioning. When following this second dialogue I am asked if I want to exclude Disk 0 (Samsung MZMTD128HAfV -00l1) which has 119Gb of capacity. If I try to exclude this disk, the operation fails with following error: "Restore failed because a disk that was critical at backup is excluded" My question is, if I do not exclude this disk, will the restore operation still leave the D:/ partition intact so I can use OKR in the future.
I have read quite a bit of imformation here and elsewhere about restoring system images and OKR, but have not seen any discussion about this disalogue, or the fact that I am being forced to reformat and repartition the disk without excluding the d:/ drive. Other posters have stated that retsoringa system image will only restore C;? drive, but this dialogue seems to conflict with those statements. Anyone else have any experience with this operation?
Thank you,

Hello:
I am trying to execute a restore from a system image disc created shortly after I installed my principal programs without destroying the OKR partition or files. However, I do not want to go all the way back to factory condition at this time. The issue is that when I attempt to follow the reimage instructions in win 8.1, I am presented with a dialog box that has two check boxes. The first asks "Format and repartition disk" and the second asks "only restore system drives".
Based on everything I've read about preserving the C:/ and D:/ drive partitions, I would have expected to check the second box and not the first. But the system will not let me make this choice. Instead, the first box is automatically checked, and greyed out, with a second dialogue asking me if there are any disks I want to exclude from repartitioning. When following this second dialogue I am asked if I want to exclude Disk 0 (Samsung MZMTD128HAfV -00l1) which has 119Gb of capacity. If I try to exclude this disk, the operation fails with following error: "Restore failed because a disk that was critical at backup is excluded" My question is, if I do not exclude this disk, will the restore operation still leave the D:/ partition intact so I can use OKR in the future.
I have read quite a bit of imformation here and elsewhere about restoring system images and OKR, but have not seen any discussion about this disalogue, or the fact that I am being forced to reformat and repartition the disk without excluding the d:/ drive. Other posters have stated that retsoringa system image will only restore C;? drive, but this dialogue seems to conflict with those statements. Anyone else have any experience with this operation?
Thank you,

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?"

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Restoring failed: There is insufficient system memory in resource pool 'internal'

Hi,
I am going through all those similar questions but non of them solved my issue.
Our database is lost by mistake, now we need to recover the database from the backup. The backup file is 4.23 GB and when I am trying to restore the database after 40 minutes, I am getting the error 701, There is insufficient system memory in resource pool
'internal' to run this query. Restored failed and when i close it, the state for the DB is still "Restoring".
I did all these challenges but no use, please advice me how to retreive my DB back it is very important and vital.
enabled the "AWE"
enbale/disable the resource governor
changed the server
re-install SQL server
Please help me to sort out the issue.
Regards

Hi,
Thanks for your help. My server is Microsoft SQL Server 2008 R2 (SP1) (Intel X86) - Developer Edition on Windows NT 6.1 <X86>
Memory_usedby_Sqlserver_MB = 118
Locked_pages_used_Sqlserver_MB = 0
in resource pool 'internal' ( not allowed ) . I install SQL server 64 bit on another 64 bit operating system as well but this time I got another error.
The backup file can not be added it gives Sql server timeout error. ( this work for another smaller backup file) . I configure the query timeout but not solved. What you suggest now?
SP1 for SQL server 2008 R2 is not the latest but the latest is SP2. Please apply it when you move ahead.
Since you had 32 bit this error can come.I cannot reproduce the error neither I know what all queries or processes were running when you got OOM error during restore so its hard to tell .Did you set value for MAX server memory in sp_configure.How much physical
RAM do you have ?
Can you post complete error when you tried to restore backup on 64 bit. Also make sure you cannot restore backup from 2008 R2 to lower versions.( like 2008, 2005)
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

I am using my iPhone 4s personal hotspot as the internet router for my notebook. However, I am gtting the WEB SITE IS BLOCKED BY NETGEAR FIREWALL. I've deleted some other wifi connections I had before, had system restores, clear cahes and cookie. FAILED.

I am using my iPhone 4s personal hotspot as the internet router for my notebook. However, I am gtting the WEB SITE IS BLOCKED BY NETGEAR FIREWALL. I've deleted some other wifi connections I had before, had system restores, clear caches and cookie. Still, I failed. Whenever I tried to access FACEBOOK, it's still blocked so I still had to use https:// or tl-gp. please help asap.

Well, aren't you all that and a bag of chips!!!!
Oh what a relief! What a RELIEF!
That just cleaned up my life. And Cranky Boy is actually smiling!!!
Houston, we've got dots AND BARS!!!
P.S. All my firware and software are always current. If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
P.P.S. Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!! Who knew?
Thank you so much, m'Lord. I am in your debt. What would you have me do?
Patti in Tucson AZ

Trust Relationship between PC and Domain broken\failed after System Restore

We are currently faced with a problem that every time we do a System Restore on our Windows 7 workstation, upon login attempt, we an login failed because the Trust Relationship between PC and Domain is broken.
As solution: we have to log in as a local admin, remove the workstation account from the domain, then re-add the workstation back to the domain.
Does anybody know if there is a hotfix for this or how we can bypass having to remove and re-add the workstation to the domain in order to login?

Have you checked on when the computer last checked in and changed the computer account password with the domain? When a computer changes it's password, Active Directory will store only the current password and it does not expire. The workstation
will store both the current password and the previous password. This for cases when you may restore Active Directory to a point before the computer password change.
To handle this, the workstation will try it's current password, then it's previous.
If you're restoring the workstation to a previous point in time, you may be rolling the stored passwords back too far for Active Directory to accept. I would only imagine this to be the case a handful of times if you're going back 1-2 days.
Are you experiencing 100% failure?

System Restore Fails

Similar Messages

Maybe you are looking for