System running slow/freezing
THE SHORT VERSION:
My OS was running extremely slowly, and computer making strange noises, much higher frequency than usual (hard drive clicking occasionally too). I reinstalled OS X from my installation DVDs using Archive and Install. The system is running much more reasonably, but sometimes freezes up. Normally when your CPU is busy, you hear a steady stream of little ticking noises, but occasionally, the pattern shifts from a steady stream into triplets of short bursts that are emitted periodically (short-long-short...short-long-short). When this occurs, the system freezes/I get a spinning colour wheel.
Has anybody ever experienced this? Can you shed light on what might be going on. Here are more details if you want to read them:
THE LONG VERSION
- I installed Firefox 3...everything was working. I closed my laptop and went to sleep
- When I woke up the next morning, I noticed it wasn't asleep, and may not have been all night
- I shut down the computer, and turned it back on.
- When I logged back into OS X...my system was all messed up. Constant spinning colour wheel, weird noises as described above. System was slow enough as to be unsuable (dock never appeared after login)
- I managed to put in my Tiger installation DVD 1 and boot up from it and run the disk utility -- NO problems were found with my hard drive.
- I called AppleCare...they recommended uninstalling Firefox 3...which I somehow managed to do, although it took a really long time -- no improvement.
- They next recommended an archive and install...so I did it.
- The system was now usable, but still had problems (the short-long-short issue described at the beginning of the post)
- I ran an Apple Hardware Test...no trouble found.
- I called AppleCare--they recommended a technician look at it (ie that I take my computer in for servicing. I haven't yet done so.
-- I have noticed that when I log in using the original Admin account (as opposed to the one I use on a day to day basis), that the system performance is much more free of problems, although even when I am logged in using this seldom-used account, the computer is not totally immune from this peculiar "short-long-short" burst of ticks that seems to accompany a freezing up.
System freezing, especially after an Archive & Install points to a couple of further solutions that you may wish to try.
1. Perform an Erase & Install. Although the Archive & Install is typically very good about resolving direct damage or issues with the underlying OS, a clean reinstall will all but eliminate a software issue as the problem. If go the route of an erase and install, just make sure that use the machine for a little while to verify the issue is resolved before you go installing 3rd party applications.
2. It's possible that there's hardware failure, or an early warning indicator of hardware failure. It could be HD-based or MLB-based. Having an Apple technician with the appropriate tools to further triage the issue is more than likely in order. Let them dig through the Console logs, monitor activity monitor during load, etc.
Similar Messages
-
MBP 4,1 running 10.6.8 snowleopard and it runs great but i was wondering if upgrading to moutain lion will make run slower?
Lion is still available but you have to Call Apple to order it and then they send you a Redemtion Code to your Apple ID Email address that you use on the Mac App Store to download it.
But in all honesty even Lion is going to make your system run slower then it now does. Lion, like Mt Lion, uses more system resources then Snow Leopard. I can see the difference on my 2011 MBP with 8GBs of RAM and a fairly fast hard drive. Snow Leopard boots and runs faster then Lion and more so then Mt Lion.
What you need is a New or Newer MBP. If that is not an option then the only thing I can say is give Lion a try. That is AFTER you do a complete Time Machine Backup of your current Snow Leopard install just in case you need to go back.
By the way Apple replaced the Logic board in your system with the same Faulty NVidia chip install in it. Apple Never Updated the NVidia chip used on those logic boards. So odds are sometime in the future, Near or Far, that board will fail again. -
Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?
See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Once you get familiar with the Mac, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information. -
Which one making my system running slow...
Hello,
Due to sudden rain water went inside my MBP andi kept inisde without turing on for 3 days
after that i tried to on but it dint turn on,, i opned and cleaned water inside meachine... It turnd on but no luck ,showing no battery as big X and system is running too slow ,I cant able to play my videos..I
Have any idea about what went wrong, WHAT making my system running slow..
HELP ME PLZZZ....Is it running at all?
http://www.tekserve.com/service/spill.php -
Macbook pro system running slow - etrecheck shows issues - any idea how to apply fixes?
Hi I normally consider myself pretty web savvy but I'm totally lost on what to do here. This computer has been running slow since I got it, but the harddrive went sideways recently. I've never worked with a recovered drive - which I apparently have as my terminal lists my workfolder-2 so....I'm guessing I'm pretty screwed. I learned about etrecheck through the forums here but don't understand how to apply it
Would anyone help me understand what I need to do?
Here's my etrecheck:
Problem description:
very slow osx system even with only one or two apps open - standard 2013 macbook pro
EtreCheck version: 2.1.5 (108)
Report generated January 1, 2015 9:52:46 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 4 days 8:16:35
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (310.25 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N disk1 : (369.9 MB)
disk1s1 (disk1s1) <not mounted> : 54 MB
disk1s2 (disk1s2) <not mounted> : 26 MB
disk1s3 (disk1s3) <not mounted> : 34 MB
disk1s4 (disk1s4) <not mounted> : 33 MB
disk1s5 (disk1s5) <not mounted> : 65 MB
disk1s6 (disk1s6) <not mounted> : 29 MB
disk1s7 (disk1s7) <not mounted> : 26 MB
disk1s8 (disk1s8) <not mounted> : 20 MB
disk1s9 (disk1s9) <not mounted> : 36 MB
disk1s10 (disk1s10) <not mounted> : 12 MB
disk1s11 (disk1s11) <not mounted> : 35 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 2
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.4.18) [Support]
[not loaded] com.vmware.kext.vmioplug.10.1.24 (10.1.24) [Support]
[not loaded] com.vmware.kext.vmnet (0104.03.86) [Support]
[not loaded] com.vmware.kext.vmx86 (0104.03.86) [Support]
[not loaded] com.vmware.kext.vsockets (90.4.23) [Support]
/System/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4228 - SDK 10.8) [Support]
[loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.1) [Support]
[not loaded] com.waltop.iokit.driver.USBAtTablet (1.1.0) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.CalendarAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.pbs.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.tccd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist [Support]
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.penpad.penpadtablet.plist [Support]
[loaded] org.chromium.chromoting.plist [Support]
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.github.GitHub.GHInstallCLI.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] homebrew.mxcl.postgresql.plist [Support]
User Login Items: ℹ️
Boom Application (/Applications/Boom.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]
Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
QuickTime Plugin: Version: 7.7.1
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
AdobePDFViewer: Version: 10.1.1 [Support]
Autodesk123D32: Version: Autodesk123D32 1.0.6 - SDK 10.7 [Support]
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 [Support]
Safari Extensions: ℹ️
Searchme [Installed] Adware! [Remove]
3rd Party Preference Panes: ℹ️
remoting_host_prefpane [Support]
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% coreaudiod
2% Activity Monitor
1% WindowServer
1% activitymonitord
1% Google Chrome
Top Processes by Memory: ℹ️
168 MB Google Chrome
49 MB Google Chrome Helper
34 MB mds
30 MB WindowServer
26 MB Finder
Virtual Memory Information: ℹ️
93 MB Free RAM
1.39 GB Active RAM
1.35 GB Inactive RAM
1.45 GB Wired RAM
48.43 GB Page-ins
17.53 GB Page-outsSearchme [Installed] Adware! [Remove]
Start by going to Safari/Preferences/Extensions and un-install the above.
17.53 GB Page-outs
Adding some RAM would help. Even though you haven't restarted for 4+ days, this is a little high. The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Activity Monitor – Monitor Performance Problems
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
VISTA SYSTEM RUNS SLOW AFTER INSTALLING ITUNES 10.5.3.3
First I could not download Itunes new version 10.5.3.3 by clicking on down load in Itunes. I had to open my browersand go to Apple site and down load. Once down loaded I installed 10.5.3.3, Now it seems my system is running slow and hangs. Not just in Itunes but in other progams also. Any ideas?
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store -
System running slow since installing yosemite
Problem description:
My iMac is running very slow since installing Yosemite. I turned off iCloud for photos and this seems to have helped, but it is still running slow. When I ran this EtreCheck, there seem to be a lot of "failures". What's up with my Mac?
thanks,
todd
EtreCheck version: 2.0.10 (97)
Report generated November 2, 2014 at 2:05:21 PM PST
Hardware Information: ℹ️
iMac (27-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
empty empty empty empty
BANK 1/DIMM0
empty empty empty empty
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 10 days 3:20:14
Disk Information: ℹ️
ST1000DM003-9YN162 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Todd's Drive (disk0s2) / [Startup]: 999.35 GB (168.82 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
IOMEGA IOMEGA MINIMAX Device 1 400mbit - 400mbit max
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted> : 32 KB
disk1s2 (disk1s2) <not mounted> : 29 KB
disk1s3 (disk1s3) <not mounted> : 29 KB
disk1s4 (disk1s4) <not mounted> : 29 KB
disk1s5 (disk1s5) <not mounted> : 29 KB
disk1s6 (disk1s6) <not mounted> : 262 KB
disk1s7 (disk1s7) <not mounted> : 262 KB
disk1s8 (disk1s8) <not mounted> : 262 KB
Iomega HDD (disk1s10) /Volumes/Iomega HDD : 499.97 GB (74.61 GB free)
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Roxio Toast Titanium 5.1.1/Toast Titanium 5.1.1.app
[not loaded] com.roxio.TDIXController (1.0) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4212 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.ATITechnologiesInc.TVOut (2.0) Support
[not loaded] com.Cycling74.driver.Soundflower (1.5.0) Support
[loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[not loaded] com.heartmath.emwave (1.1.0) Support
[not loaded] com.lexar.iokit.IOSCSILexarCommandsDevice (1.0.5) Support
[not loaded] com.logitech.iokit.quickcam (1.0.7) Support
Startup Items: ℹ️
RetroRun: Path: /Library/StartupItems/RetroRun
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
[failed] com.apple.xpc.loginitemregisterd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.spindump.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[failed] com.adobe.CS4ServiceManager.plist Support
[invalid?] com.brother.LOGINserver.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.codecm.uploader.plist Support
[invalid?] com.google.Chrome.framework.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.zeobit.MacKeeper.Helper.plist Support
[invalid?] de.metaquark.appfresh.plist Support
User Login Items: ℹ️
System Events Application (/System/Library/CoreServices/System Events.app)
iTunesHelper UNKNOWN (missing value)
.VirexLogin Application (/Applications/Virex 7/.VirexLogin.app)
Dropbox Application (/Applications/Dropbox.app)
My Day Application (/Applications/Microsoft Office 2008/Office/My Day.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
OfficeLiveBrowserPlugin: Version: 12.2.3 Support
OVSHelper: Version: 1.1 Support
RealPlayer Plugin: Version: (null) Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Cannot contact Adobe
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Unity Web Player: Version: UnityPlayer version 4.5.2f1 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
CANONiMAGEGATEWAYDL: Version: 2.1.0.1 Support
Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 Support
CANONiMAGEGATEWAYLI: Version: 2.1.0.1 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
MediaLink Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Todd's Drive: Disk size: 999.35 GB Disk used: 830.52 GB
Destinations:
Iomega HDD [Local]
Total size: 499.97 GB
Total number of backups: 9
Oldest backup: 2014-03-31 08:05:18 +0000
Last backup: 2014-09-26 17:26:27 +0000
Size of backup disk: Too small
Backup size 499.97 GB < (Disk used 830.52 GB X 3)
Top Processes by CPU: ℹ️
22% WindowServer
3% Google Chrome
2% spindump
2% iPhoto
1% Little Snitch Agent
Top Processes by Memory: ℹ️
348 MB iPhoto
112 MB Google Chrome
94 MB mds
73 MB AppleIDAuthAgent
52 MB Finder
Virtual Memory Information: ℹ️
97 MB Free RAM
1.04 GB Active RAM
960 MB Inactive RAM
752 MB Wired RAM
120.16 GB Page-ins
4.07 GB Page-outsMy Mac also very temperamental since installing Yosemite, it sounds like it's constantly working very hard no something, it delays when clicking, typing, switching applications, I'm seeing a lot of twirling umbrellas. I've also done the Etre Check report and would be grateful for any help.
Problem description:
System generally running slow, delay switching between tasks, pressing on menus etc, the twirling Apple umbrella showing up frequently
EtreCheck version: 2.0.11 (98)
Report generated 6 November 2014 16:11:01 GMT
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 3 days 6:25:17
Disk Information: ℹ️
Hitachi HDT721050SLA360 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (131.63 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Apple Inc. iPhone
Apple Inc. Built-in iSight
USBest Technology USB Mass Storage Device 4.04 GB
S.M.A.R.T. Status: Verified
JG 4GB KEY (disk1s1) /Volumes/JG 4GB KEY : 4.04 GB (3.24 GB free)
Apple Internal Memory Card Reader
Western Digital My Passport 070A 499.41 GB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
My Passport (disk2s2) /Volumes/My Passport : 499.06 GB (1.89 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/hosts - Count: 42
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/LogMeIn/drivers
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) Support
/Library/Extensions
[not loaded] jp.co.yamaha.driver.YamahaSteinbergUSBAudio (1.8.32 - SDK 10.6) Support
/System/Library/Extensions
[not loaded] com.Huawei.driver.HuaweiDataCardDriver (2.9.7) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMControl (1.1.9) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.1.9) Support
[not loaded] com.novatelwireless.driver.3G (2.0.1) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.0) Support
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) Support
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
[loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) Support
[not loaded] jp.co.roland.RDUSB0009Dev (1.0.0) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GControl (2.0.1) Support
[not loaded] com.novatelwireless.driver.3GData (2.0.1) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[failed] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.teamviewer.teamviewer.plist Support
[running] com.teamviewer.teamviewer_desktop.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.logmein.logmeinserver.plist Support
[invalid?] com.logmein.raupdate.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.teamviewer.teamviewer_service.plist Support
[failed] com.vmware.launchd.vmware.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[running] com.eltima.Folx.Agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[failed] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 8.3.1 Support
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
PrintDialogExt: Version: 6.1.1 Support
googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
Scorch: Version: 5.2.1 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.1.0 Release Support
Musicnotes: Version: 1.16.12 Support
DivXBrowserPlugin: Version: 2.0 Support
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 7.1 Support
FolxNetscapePlugIn: Version: Unknown
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
NPDjVu: Version: 6.1.2 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
ContentUploaderPlugin: Version: 1.2 Support
JavaAppletPlugin: Version: Java 7 Update 45 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
FolxNetscapePlugIn: Version: Unknown
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
Dashlane
3rd Party Preference Panes: ℹ️
Déjà Vu Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
Java Support
Perian Support
Yamaha Steinberg USB Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 367.62 GB
Destinations:
My Passport [Local]
Total size: 499.06 GB
Total number of backups: 60
Oldest backup: 2014-06-24 23:04:57 +0000
Last backup: 2014-11-06 15:09:25 +0000
Size of backup disk: Too small
Backup size 499.06 GB < (Disk used 367.62 GB X 3)
Top Processes by CPU: ℹ️
2% Dropbox
2% WindowServer
2% cfbackd
1% backupd
0% LogMeIn
Top Processes by Memory: ℹ️
679 MB PhoneView
266 MB Finder
223 MB Mail
206 MB Microsoft Word
206 MB WindowServer
Virtual Memory Information: ℹ️
162 MB Free RAM
2.75 GB Active RAM
2.58 GB Inactive RAM
1.25 GB Wired RAM
22.42 GB Page-ins
166 MB Page-outs -
Re-set the phone, will work then will will slow, freeze,not receive text messages
Sluggish performance can mean that your hard disk drive is failing. Are you running Verify Disk while you're booted into you main partition or whilst booting into your Recovery partition. If you're not in Recovery mode, you should be - simply start up whilst holding down the command and R keys and use the Disk Utility app in the mix to Verify and, if necessary, Repair your hard drive.
If your hard drive has failed, you'll know with either Verify or Repair.
Try it and call back.
Clinton -
Downloaded Mavericks to my fast running 2010 Macbook a couple of days ago and since this the whole system is running slow.
How can i speed it up again please?Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Safari system running slow and freezing and it's not the Internet
It keeps freezing and not being able to load. But the Internet is fine. I can use the wifi on my phone very quickly.
Amber...
Do you have Little Snitch installed? How about anti virus software?
And try turning off the Firewall in System Preferences > Security.
Since your iPhone can access your Wi-Fi network, on your Mac open Airport Utility located in /Applications/Utilities
Select your Wi-Fi on the left then click Manual Setup.
Select AirPort from the menu then select the Wireless tab.
Make sure you have the correct password entered there.
If you can't remember the password, open Keychain Access /Applications/Utilities
Select Passwords on the left.
Type base station in the search field top right corner of the window.
Right or control click the base station keychain.
Select the Attributes tab.
Select: Show password -
Snow Leopard running slow, freezing, not responding.
I am running Snow Leopard on Mac 2.4 GHz Intel Core 2 Duo with 3 GB SDRAM.
Over the last few days the machine has gradually become slower and slower, the spinning wheel frequently appears and programs are not responding and the system freezes.
When I restart, on a couple of occasions a white screen with grey pixel blocks has flashed up during start up, other times it has frozen on the blue screen.
I have tried running Disk Warrior, Disk Utility, ClamXav, Onyx and disconnected all hardware, then finally I have reinstalled Snow Leopard but still seem to be having the same problems.
By the way, I am also running VMware Fusion, don't know if this is relevant.
Any suggestion, please?
Message was edited by: STEVO75I would try running the extended version of your Apple Hardware Test.
It's not perfect but may flag something.
DALE -
EtreCheck version: 1.9.15 (52)
Report generated 7 September 2014 21:25:45 BST
Hardware Information: ?
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:56:26
Disk Information: ?
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 159.18 GB (67.65 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ?
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.nike.sportwatch (1.0.0) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
[not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
[loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS3.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.rim.BBDaemon.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
[running] com.nike.nikeplusconnect.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.facebook.videochat.[redacted].plist Support
[running] com.spotify.webhelper.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items: ?
Microsoft AU Daemon
Dropbox
Skype
Microsoft Database Daemon
Internet Plug-ins: ?
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.0.61118.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
AdobePDFViewer: Version: 8.0.0 Support
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Adobe Version Cue CS3 Support
Flash Player Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 148.25 GB Disk used: 85.25 GB
Destinations:
My Book [Local] (Last used)
Total size: 931.39 GB
Total number of backups: 6
Oldest backup: 2013-06-17 13:53:28 +0000
Last backup: 2014-08-24 23:12:32 +0000
Size of backup disk: Excellent
Backup size 931.39 GB > (Disk size 148.25 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
28% firefox
3% WindowServer
2% hidd
1% MacKeeper Helper
0% BBLaunchAgent
Top Processes by Memory: ?
315 MB AntiVirus
234 MB firefox
86 MB Finder
49 MB WindowServer
29 MB loginwindow
Virtual Memory Information: ?
28 MB Free RAM
567 MB Active RAM
547 MB Inactive RAM
311 MB Wired RAM
864 MB Page-ins
73 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have an iPhone 4. My iPhone is running too slow compared with other iPhone 4. So how if i want to stabilize the system or to boost the system without erases any photos or contact?
You can always get more focused help if you can add things like
how much RAM, free space on the disk drive, any recent changes, what program exactly, and whether you have tried using Applejack (handy way to repair the drive and delete unneeded cache files).
Some but not all processes that you control are in /Library/StartupItems but there tend to be programs that don't use that method.
Backup + Erase + Restore (ie, clone the system to another drive). In fact, you might try booting off the newly cloned FW drive and see how it runs.
Spotlight indexing - when it kicks in - can result in sluggish performance, or if the system is looking for files that are fragmented.
I feel like there are 'gremlins' in the system at times, even on MacPro with enough memory, fast boot drive, and well maintained. So you aren't alone.
Make sure you have the firewall enabled, and use Activity Monitor to watch for cpu usage, network activity... though when it was just now acting slow, there was no sign of WHY or WHAT was happening, zilch, no 'feedback' on the cause.
I would be concerned with having broadband and being (ab)used by P2P (peer networking) programs that sometimes try to use PCs as "zombie" unwilling hosts. There are 3rd party software programs to monitor outbound and inbound traffic as well as to close traffic on any services (most outbound traffic is considered "user activity" when that isn't always the case).
From time to time, I think you will find that reinstalling or restoring the system really does help. Even if there aren't any serious directory problems. You might want to rerun the combo 10.4.4 update, or update to 10.4.8. Make sure you have 30-40% free space or off load files to FW. Add more RAM if possible. Or, upgrade to Core 2 Duo. -
Macbook is running slow, freezes, pinwheel.
Hello,
I've recently been having some issues with my Macbook. It has been running very slow, even after restarting. I've only been running a few programs (Safari, Word, Finder) and have been watching memory/CPU usage in Activity Monitor, but haven't noticed anything too out of the ordinary
How large is your hard drive & how much space is free?
Hard drive is 206.88GB, with 41.68GB free.
How much RAM in this computer?
2GB 667MHz DDR2 SDRAM
In what way(s) is it slow? Do applications open slowly? Do they lock up?
Applications have been locking up, frequently get a pinwheel when switching between programs (Safari to Word or to Finder). Has been unresponsive/delayed.
This is a recent problem and I just updated my system within the last few days. Is there anyway to restore my computer to before the last update? Seems similar to http://discussions.apple.com/message.jspa?messageID=11335359#11335359
Thanks.Few suggestions:
Try working in Safe Mode by holding the Shift key while booting. This may take a few minutes, so be patient! Does the computer work any better in Safe Mode?
If you have your install discs, insert Install Disc 1 and restart the computer with the C key held down. Once the Installer has loaded, choose a language, then click the Utilities menu. Choose *Disk Utility*.
In the left-hand pane of the Disk Utility window, click on *Macintosh HD*. Click the *repair disk* button.
Report any errors that cannot be repaired.
~Lyssa -
After upgrading to 10.5.4, CPU keeps maxing out and system runs slower
Hi there,
I upgraded to 10.5.4 last week and quite frequently my CPU starts revving up and stays at a high level until I put my iMac to sleep. When I did my weekly reboot last Friday it seemed to not have the problem for a while, but then it came back again pretty quick. By checking Activity Monitor I found out that my resources are maxed out all the time, I've got about 80% CPU attached to Safari right now. Applications seem to load slower, everything runs a bit slower when it's like this.
I found under System Preferences > Energy Saver that I had my Processor Performance set to Highest, so I switched that to Automatic, but I'm still having this problem.
Can anyone help me with this?
TravisThank you, Pondini, that's all I was really asking about in the 3 (4) previous messages. I wanted to know if I could download the combo updater and install it over top of the 10.5.4 version I downloaded through Software Update. Thanks for the confirmation. I did download it this morning after getting your post and have installed it.
Initially, after installation and reboot of the combo update 10.5.4, my CPU maxed out again for a little while, and I checked Activity Monitor and it said a program called "Pattern ?" was hogging the CPU, the ? refers to a second word that I didn't write down at the time, I think it started with the letter M.
I had my iMac turned off for a couple hours after that. When I turned it back on, I was ripping 4 CD's into iTunes and so it sounded like the CPU was running high again through that, but I think that's typical for when I'm ripping a CD. Anyhow, right now the CPU is running normal, about 20% of total cycles used and that Pattern ? whatever program has disappeared from the list. So maybe that was something that the Combo Updater 10.5.4 was using to fix a problem and it might be back to normal again.
So, so far so good, thanks to the people here who have helped. I will post again if the problem persists.
Also, Pondini, thanks for reminding me to check posts in the forum for information. I almost always do that initially, before I post my question. I did that this time, but I had no idea at the time that downloading the combo updater would be the solution as I was scanning the forum for people who had spiking CPU's, not any other type of problem. I suppose in hindsight, after finding that combo updater might be a possible solution to my problem I should have ended this thread and sought new information, posed a new question / post if necessary. But like you say, I would have found other posts about installing combo updater.
Travis
Maybe you are looking for
-
Adding analytics issue with OrgModeler
Hello Experts, Could you please help with OrgModeler issue. When creating scenario I try to add analytics but it doesn't appear in the list of analytics so when clicking "next" it says: Error: To set KPIs/Structure requires at least one analytic (scr
-
[SOLVED] i'm trying to mount an iso
hi, im trying to mount a cd image, but am getting the following error, [root@arch image]# mount -t iso9660 -o loop image.iso cd1 mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In som
-
Execution time in minutes and seconds
In the UUT Report, the Execution Time displays in seconds. How can I get that to display in minutes and seconds.
-
Placing several times with place gun...
Hello there! I came across a "problem", which is showing up in the following way... When I want to place a file via place gun function (placing a file with multiple pages), I want to place various pages several times. Somehow I made it before to do s
-
Can't click inside td or tr ???
This is annoying. When I click inside a cell or a row on SOME tables, the entire table is selected. I just want to place the cursor inside the <td> so I can either enter text or insert a graphic. I know there are machinations I can accomplish this (c