System setting does not allow changes to be made to object LSYS
Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed
Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding
Similar Messages
-
System setting does not allow changes to be made to object
Hi experts,
I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
"System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.Hi,
If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
Or you can find the text in the note:
«/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
Regards,
André Nunes -
System settings does not allow changes to be made to object
Hi,
In one of my test system, when i tried to change the object its displaying following error message.
System settings does not allow changes to made to the object.
I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
I would like to know, how to change the object in the namespace.
Regards
SrikanthHi,
In SE06, in addtion to system status and component status, check the namespace status too.
It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
Regards,
Srikishan -
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30
hi,
Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
gives the following error:
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
Our support packages are as following:
SAP_BASIS 640 0009
SAP_ABA 640 0009
ST-PI 2005_1_640 0000
PI_BASIS 2004_1_640 0006
SAP_BW 350 0009
BI_CONT 353 0000
Could you please suggest or help us in resolving the issue ?
thanks and regards,
YogeshHello,
the above mentioned note is too old. Please check note 781371.
Please also check in transaction SM30 view V_TRNSPACE
the record for /1SEM/:
Namespace: /1SEM/
Namespace role C
Repair License
SSCR Popup X
SAP Standard X
Gen Objs Only X
Regards,
Gregor -
System setting does not allow... With implementing a SAPNOTE
Hi all,
I try to implement a manual activity of a SAPNOTE.
But, when I want to modify a Source Program with SE38, I obtain the error :
System setting does not allowe changes to be made to
object PROG RFUMSV25
The properties of client is which is open to modify of customizing from SCC4.
thank a lot
DavideYes ther is:
KE1K919403 BRUNODAVI2 Note Assistant - Nota n° 1150463
|
KE1K919404 BRUNODAVI2 Repair
- Documentation
- Single Message
- Report Source Code
- Report Texts
|----- RFUMSV25
and this cr is transported into quality..! -
Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1 Server 2
Server3
RDSession Host RDSession Host
RDSession Host
Connection Broker Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
-poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your helpHi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki -
Field VBUND does not allow changes to the document ?
If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
I can't change trading partner.
Thanks!!
Message was edited by: Rico WangRico,
Using trn code SM30, modify table V_TBAER and insert the entry
BSEG-VBUND for account type S, D, K, A
and see the effect.
Thanks
Mohit
ps: you may want to check OSS notes as well. -
My iPhone has the correct Apple ID for everything BUT iCloud. How do I change that. Going through Settings shows the incorrect ID but it does not allow change.
Settings > iCloud > delete account
You want to keep all content on your iPhone
Resign back in -
I've rentented a movie and would like to watch it. Consistently I receive the message "an error occured loading this contnt ...try again later". I've tried over a long period several times but always receive the same message. Also, I tried to re-purchase the movie but the system does not allow this. It just confirms "you have already rented this movie". any suggestions. Can't I just cancel the rental since I have not even fully streamed the movie/
Likely network related
What is your current connection, use speedtest
Go to istumbler or netstumbler to get a report of the network, look for signal strength and noise
If on wifi try Ethernet
Make sure DNS is set to automatic (settings - general - network) -
How do I install a SSD drive - the Bios does not allow changing to AHCI mode
I have a Windows 7, HP ENVY approx 1.5 years old. I want to install an SSD drive, however the BIOS seems to be locked, or does not include options to change the SATA connection to AHCI or RAID.
How does one unlock the BIOS, or change the sata settings to allow an SSD drive to be installed?Hi:
AHCI is enabled by default on today's HP consumer notebooks.
Nothing can be done to actually see a setting, or change the setting to anything other than AHCI etc.
Paul -
System SAP does not allow to post a journal that is not balancing?
According to the implementation of controllers SOX in the company, I need
to verify if the SAP ERP system must like standard functionality not
allow to record documents that are not balanced (debit = credit).
I appreciate its collaboration and I am awaiting its commentariesHi
SAP Follows the document principle which means that unless the debit is equal to credit in a document you cant save the document.
This is based on the double entry system of book keeping and in sync with the accounting principles accepted world over.
I hope im clear
Assign points if useful
Regards
Aravind -
System does not allow change to matrial master as there is open transaction
Hi,
I am trying to change an existing material master (MM02 of account view 1) to split valution, however, I encounter the following log message which prevent me to change the valuation category.
Message Log
The Valuation Category Cannot be Changed for the following reasons:
Production Order (basically IW33 PM refurbish order) already exist.
PlantOrderItem
1000-4018111--1
Suprisingly the PM order is closed and it has the following status:
CLSD, PCNF, DLV, GMPS, MANC, PPRT, PRC, SETC.
May I know how to resolve this so that I can update my material master to split valuation in accounting view?
Thanks.
TuffHi
When you are getting error while changing the valuation category for any material in MM02, you can see one icon of display error, please click on that and here you can see all details about what you need to do.
Split valuation
Valuation Category change in accounting view in material master
Valuation type - Removal
http://help.sap.com/saphelp_470/helpdata/en/90/ba6228446711d189420000e829fbbd/content.htm
Hope this will help you to solve your problem
Regards
Praveen P C
Edited by: Praveen Chirakkel on Aug 2, 2011 11:34 AM -
How do I have my wife's iphone 4s upload pics to the same icloud I use for with my 4s and ipad? Can seem to change her icloud ID to match mine.
I can tell you how to do this but first wanted to be sure that's what you want to do. You would then be sharing the same iCloud account and any synced data (contacts, calendars, etc.) would then be merged and the merge data would appear on her phone and your iPad (i.e., you'll end up with each other's contacts on your phone). You would also both be backing up your devices to the same account, sharing the 5GB of free storage (assuming you're both backing up to iCloud).
There's an alternative setup that would allow her to set up your iCloud account on her phone as her primary account and just turn on photo stream in that account (allowing your to share you photo stream), then set up a secondary iCloud account on her phone that would sync her Mail, Notes, Contacts, Calendars and Reminders. She would still have to back up her phone to your account, as well as syncing Safari, Documents and Find My iPhone (all of which can only be done in the primary account). Also, her mail would be fetch, not push as push email is only supported in the primary account.
I suppose a third option is to leave things as they are and share you photos with each other using shared photo streams.
Let me know what you want to do and I'll give you the steps. -
SSIS File System Task does not allow entering the destination variable
In SSIS for SQL Server 2012 (2014) I am not able to change the destination to a variable in the File System Task.
I have 2 variables for the source and destination path. I pull in a File System Task, change the source to a variable, but when I select the destination I cannot enter the destination variable. When I change destination to a variable
the dialog disappears when I try to select the variable.
http://www.screenr.com/fQKNHi Steve,
I have tried myself, it is working fine. Its look like something wrong with your visual studio. try to reinstall it or reset the visual studio.(http://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx).
If you really want to set destination values, you can set them from properties window of the task.(Right click the task and select properties or select the task and press f4).
There are properties like:
IsDestinationPathVariable (True/False)
Destination (VariableName eg: user::target)
Regards Harsh -
I was reading a OSS note that said you could change a hierarchy datasource using RSA2. I want to change the class used from 0000 to 0110.
How is this done. My RSA2 is display only
ThanksRichard,
Have you tried RSA8 (Postprocess Datasources & Hierarchy) ?? Looks the same as RSA6 though...else I wouldn't know. My advise would be just follow the steps in the note below "The enhancement procedure for the OLTP system is as follows" and use RSA6/-8 i.s.o. RSA2 (display only, note incorrect?).
Regards,
Marco
Message was edited by: Marco Verbaan
Maybe you are looking for
-
How can I verify my icloud account on my iphone as I dont have an apple email account
How can I verify my icloud account on my iphone as I dont have an apple email set up
-
Adobe Reader 11 "choose paper source by pdf page size" does not work
Hello, I have a user that utilizes the "choose paper source by pdf page size" option when printing a PDFs. He has a PDF that has a letter sized page and a legal sized page. I recently upgraded his Adobe Reader from 10 to 11 and now that option isn't
-
can I limit traffic per application at 3750 switch , HTTP traffic not exceed Certain BW
-
Hi . I want to know how we can associate reference Operation Set to a Routing with using the FM: CP_BD_DIRECT_INPUT_PLAN (The Direct Input API for Routing update) . I am successful with creation of Operations(Table: PLPO_DI_TAB). I found few field
-
Address in use: JVM_Bind
Hi, After pressing ctrl-c to shut down oc4j R2, I got the following problem in restarting oc4j. Error starting HTTP-Server: Address in use: JVM_Bind It seems that the port is not release. Is there any way to release the port? This problem seems to be