System setting does not allow... With implementing a SAPNOTE

Hi all,
I try to implement a manual activity of a SAPNOTE.
But, when I want to modify a Source Program with SE38, I obtain the error :
System setting does not allowe changes to be made to
object PROG RFUMSV25
The properties of client is which is open to modify of customizing from SCC4.
thank a lot
Davide

Yes ther is:
KE1K919403       BRUNODAVI2   Note Assistant - Nota n° 1150463
|
KE1K919404   BRUNODAVI2   Repair
- Documentation
- Single Message
- Report Source Code
- Report Texts
           |----- RFUMSV25
and this cr is transported into quality..!

Similar Messages

System setting does not allow changes to be made to object LSYS

Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed

Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding

System setting does not allow changes to be made to object

Hi experts,
I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
"System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

Hi,
If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
Or you can find the text in the note:
«/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
Regards,
André Nunes

System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30

hi,
Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
gives the following error:
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
Our support packages are as following:
SAP_BASIS       640                   0009
SAP_ABA         640                   0009
ST-PI           2005_1_640            0000
PI_BASIS        2004_1_640            0006
SAP_BW          350                   0009
BI_CONT         353                   0000
Could you please suggest or help us in resolving the issue ?
thanks and regards,
Yogesh

Hello,
the above mentioned note is too old. Please check note 781371.
Please also check in transaction SM30 view V_TRNSPACE
the record for /1SEM/:
Namespace:     /1SEM/
Namespace role C
Repair License
SSCR Popup     X
SAP Standard   X
Gen Objs Only X
Regards,
Gregor

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

System settings does not allow changes to be made to object

Hi,
In one of my test system, when i tried to change the object its displaying following error message.
System settings does not allow changes to made to the object.
I have checked the settings in se03, regarding modification objects of software components and namespace those are in state of modifiable for this namespace object.
I would like to know, how to change the object in the namespace.
Regards
Srikanth

Hi,
In SE06, in addtion to system status and component status, check the namespace status too.
It would be better if you know the namespace of the object you are trying to modify. Set it to modifiable and retry.
To find namespace, open the object in SE80 and check the attributes. It would show assigned package, namespace, component etc.
Regards,
Srikishan

HT3180 I tried again later several times and am afraid the rental period will expire and will not be able to watch the movie. The system also does not allow me to re-purchase the movie.

I've rentented a movie and would like to watch it. Consistently I receive the message "an error occured loading this contnt ...try again later". I've tried over a long period several times but always receive the same message. Also, I tried to re-purchase the movie but the system does not allow this. It just confirms "you have already rented this movie". any suggestions. Can't I just cancel the rental since I have not even fully streamed the movie/

Likely network related
What is your current connection, use speedtest
Go to istumbler or netstumbler to get a report of the network, look for signal strength and noise
If on wifi try Ethernet
Make sure DNS is set to automatic (settings - general - network)

HT4623 My iphone will no longer sync with my Mac with Lion operating system which does not interface with the cloud. How do I sync by plugging in?

I have always been able to sync by plugging into my computer Mac OS 10.6.8 which does not interface with icloud. Now my iphone only wants to sync calander and contacts via icloud and will not sync when plugged in. Does any one else have this issue and or ideas?

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

System SAP does not allow to post a journal that is not balancing?

According to the implementation of controllers SOX in the company, I need
to verify if the SAP ERP system must like standard functionality not
allow to record documents that are not balanced (debit = credit).
I appreciate its collaboration and I am awaiting its commentaries

Hi
SAP Follows the document principle which means that unless the debit is equal to credit in a document you cant save the document.
This is based on the double entry system of book keeping and in sync with the accounting principles accepted world over.
I hope im clear
Assign points if useful
Regards
Aravind

SSIS File System Task does not allow entering the destination variable

In SSIS for SQL Server 2012 (2014) I am not able to change the destination to a variable in the File System Task.
I have 2 variables for the source and destination path. I pull in a File System Task, change the source to a variable, but when I select the destination I cannot enter the destination variable. When I change destination to a variable
the dialog disappears when I try to select the variable.
http://www.screenr.com/fQKN

Hi Steve,
I have tried myself, it is working fine. Its look like something wrong with your visual studio. try to reinstall it or reset the visual studio.(http://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx).
If you really want to set destination values, you can set them from properties window of the task.(Right click the task and select properties or select the task and press f4).
There are properties like:
IsDestinationPathVariable (True/False)
Destination (VariableName eg: user::target)
Regards Harsh

HT4183 The "Trust" setting does not work with 10.8.2, even openssl s_client -connect ...:636 returned CONNECTED(00000003) verify return:1

even openssl s_client -connect ...:636 returned
CONNECTED(00000003)
verify return:1
No client certificate CA names sent
SSL handshake has read 1518 bytes and written 456 bytes
New, TLSv1/SSLv3, Cipher is AES256-SHA
Server public key is 2048 bit
Secure Renegotiation IS supported
Compression: NONE
Expansion: NONE
SSL-Session:
    Protocol : TLSv1
    Cipher    : AES256-SHA
Key-Arg   : None
    Start Time: 1363044139
    Timeout   : 300 (sec)
    Verify return code: 0 (ok)
Connect to OD without SSL works fine.
Anybody else?
Henri

Hi,
here are some more informations about the problem.
The root CA certificate is imported as trusted in the system keychain of the server and the client. A certificate evaluation returns "valid certificates, trusted ...".
The client bind fails with this messages, e.g. Kerio Control is able the use LDAPS, so it seams just the problem with the trustability of the certificates. Keychain trusts the certificates, OD client bind not, this is not so consistent.
Any idee?
Thanks
Henri
2013-03-14 19:39:02.776804 CET - Trigger - notified opendirectoryd:nodes;lastServerChanged;/LDAPv3/ldaps://macpro....:636
2013-03-14 19:39:02.793467 CET - 71825.330426.330427, Module: AppleODClientLDAP - unable to create connection to LDAP server - ldap_search_ext_s for the ro
otDSE failed with error 'server connection failed' (-1) error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed (self signed cert
ificate in certificate chain)
2013-03-14 19:39:02.793501 CE
CONNECTED(00000003)
depth=1 /C=DE/...
Certificate chain
0 s:/CN=macpro...
   i:/C=DE//OU=IT/CN=*.office.../emailAddress=admin@...
verify error:num=19:self signed certificate in certificate chain
verify return:0

System update does not work with Win7 SP1 RC Wave 1

Just a heads up. System Update on win7 64-bt SP1 RC Wave 1 fails to query available updates.
My guess it is because the operating version number is incremented from 7600 to 7601.
If Lenovo would like me to work with them on testing this combination, please contact me.

Hello,
You may need to wait until Windows 7 Service Pack 1 is released (or shortly thereafter) for Lenovo's ThinkVantage System Update to work with the operating system at its new patch level.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Issue is with OpenGL. System Info it allows Normal Mode but does not allow Advanced Mode.

Problems with Repousse 3D feature in Photoshop CS5 Extended
I am trying to use the Repousse 3D feature in Photoshop CS5 Extended and have been unable to figure how I can get it to be an option using text. Can you explain how I do this, please?
I have also tried rasterizing the text first and that does not work. I have tried placing the image and them loading the selection and I still do not have the option of Repousse.
I believe the issue is with my OpenGL. In the System Info it allows Normal Mode but does not allow Advanced Mode. I spoke with the "Geek Squad" who advised that this is not an issue with my Mac but has something to do with the software.
Can someone please help me fix this? Thanks.

If you really want help you may have to provide relevant information about your OS, GPU, its VRAM …

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.

Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please???

Does not allow to set time characteristics while performing Partition

I had loaded the monthly inventory cube without setting any partition.
Now, when I tried to partition the cube thru RSDCUBE >> Change >> DB performance >> Partition, the time characteristic is greyed off and does not allow to set.
Is it becuase the cube had been loaded? Can I perform the partition now that I had compressed the request in the cube?

Yes you are correct....You want to modify an InfoCube into which data has already been loaded. You use remodeling to change the structure of the object without losing data.
You use partitioning to split the total dataset for an InfoProvider into several, smaller, physically independent and redundancy-free units. This separation improves system performance when you analyze data delete data from the InfoProvider.
You can only partition a dataset using one of the two partitioning criteria u2018calendar monthu2019 (0CALMONTH) or u2018fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
But you are trying to partition the cube which already has data so...You choose Repartitioning...
Repartitioning can be useful if you have already loaded data to your InfoCube, and:
●      You did not partition the InfoCube when you created it.
●      You loaded more data into your InfoCube than you had planned when you partitioned it.
●      You did not choose a long enough period of time for partitioning.
●      Some partitions contain no data or little data due to data archiving over a period of time.
Let me know if you need help with the steps to perform repartitioning

System setting does not allow... With implementing a SAPNOTE

Similar Messages

Maybe you are looking for