System setting donot allow any changes

Hi All,
My ABAPer is getting the error written above as soon as he tries to make entries in the Ztable on our Production system..we currently having the temporary solution wherin we do settings as -No Automatic recording of changes in Tx SCC4. but as it is not recomended to open access of production. because END users will make entries in that table.please assist me in this regards. I have tries the "System change option" in Tx SE06 also but couldnt find d sol..
Regards,
Vaibhav

Hi,
Check the ztable in SE11 TCODE
-> Type the ztable (Table) press enter / Display
-> Select Devlivery and maintanace Tab here u can check two values
Delivery class --- A
Data Browser--- Display /Maintanace Allowed.
Also check the Technical settings - Size category.(no of rows allowed for u r table)
Check if the values exist.
Regards
Balamurugan

Similar Messages

Error: The system settings do not allow any changes

Hi experts !!,
I had installed SAP NetWeaver 2004s Sneak Preview-ABAP
I am able to create database table using tcode: SE11
but I get an error when I tried to create table entries
Error:
The system settings do not allow any changes
Message no M0421
Diagnosis
The system settings (SE06 and SCC4) are such that you cannot make any changes to this table in this client
Kindly help me to fix this issue !!
Thanks,
Prembabu R

Hi,
I had modified Changes and Transports for Client-Specific Objects
-> Automatic recording of changes (Option-selected)
Now I am able to add new entries to tables.
Thanks for providing valuable information...
~Prembabu

After creation of PO system should not allow to change the price in PO

Hi There,
In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
So please advice.

Hi,
you could set in customizing for field selection keys the net price
to display for ME22N so that changes can not be made
(transaction OLME -> purchase order -> Define Screen Layout at Document Level).
Please check that you have set all the relevant field selection
groups to display: AKTV, ME22, ME22N... (read and apply note 30316)
Other workaround is try to do by yourself with the badi
ME_PROCESS_PO_CUST and send your own error message.
Regards,
Edit

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

External Hard Drive says its Read Only and wont allow any changes

My IQ505a has an external USB drive attached which is an Western Digital 3200JS USB External Disc Drive and for some reason I am unable to make any changes to data on the drive because the system has apparently marked the whole drive as "Read Only".
I have set my account to that of an Administrator and belong to the Administrators Group with all of the usual permissions except that I am unable to unset the Read Only marking on this drive.
I have also attempted to logon and make these changes with the Administrator Account but to no avail.
This problem is only with the External Drive and not the onboard drive.
Any help would be most appreciated ith this frustrating problem.
mclwlg
NZ
Regards
mclwlg - NZ
This question was solved.
View Solution.

Search the Internet and found many others with external drives, Vista, and this issue.
Found this fix (fix?):
Go to computer, right click on the drive icon, Properties, Tools, Check now. Deselect both boxes and click OK.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

The system settings do not allow any changes ???

This is the message that I get when I want to add data to a freshly created table, using the menu (in se11): Utilities -> Table Contents -> create Entries.
Have installed the Netweaver 2004s (ABAP) trial version.
Is it a customisation problem or is it because it's a trial version ?

Thank's for your relies.
T000, field CCCORACTIV has the value 2.
With SCC4 on client 000 I was able to change the permission.
Now adding entries to my table is possible.
manny thanks, Harald.

There is no Accessibility choice in the System Preferences to allow a change to transparency

When I first installed Yosemite I chose to reduce the Transparency (I think?) but I have tried going back to check but am unable to find the Accessibility icon shown below next to Time Capsule..
There is an Accessibility icon in Security & Privacy, but this does not possess the options for Transparency etc. as shown in this screen capture. I am totally dumbfounded!

Hey dennisfrombingley,
It may be that the Accessibility icon is hidden. If so, it can still be accessed via the View menu in System Preferences. You can also choose the "Customize..." option from the View menu to select which icons appear in System Preferences.
Customize your view of System Preferences
https://support.apple.com/kb/PH14362
Cheers,
Allen

System not allow to change planning plant

Hi Experts,
My problem is I changed company code , maintenance plant & planning plant in old system as per client requirement. They are using same system from last 4 years. I changed all require setting in customization but now problem is that in equipment task list system does not allow to change the planning plant in header data of IA02 T code. I updated the new planning plant in Function location master,Equipment master , Work center & assign it planner group but even system shows the old planning plant in task list header data. System shows the planning plant data in display mode.
Pl advice from where system link the planning plant field in task list header data.
Thx in adavance.
AVI DDS

Avi
Pete is right. There is no way you can change the planning plant in the Task Lists
Task list creation is done for a planning plant & you will not be able to use the existing tasklist for your updated equipments having different PPlants.
The only way to proceed is to create new tasklists
Delete the old assignments of the tasklists to the maintenance item & reassign the new tasklists to the existing items
In case you dont want the tasklists in the system itself, you will have to delete the tasklists - ie mark the deletion indicator in the change mode & archive the TLs.
Regards
Kartik

O change store but the system will not allowI have left $ 1.42 in my US store

Have $1.42 in my US store
the system will not allow to change
how can i change stores?

You can't change countries whilst you have a balance on your account. If you can't spend it then you can try contacting iTunes support and ask them if they can remove the balance : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Any changes to BI for procument and Inventory in Delta Fun & release notes

Hello Guru's
Are they any changes to BI for Procurement and Inventory, in the DELTA Functionality and release notes. Will anyone reply me any link that will be of great help.
Full points to the link / oss

Hi,
See
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
The steps in BI 7.
In R3
0. Delete previous data: TC lbwg, application 03.
1. Delete Queue in LBWQ/SMQ1 related to 03.
2. Lock the system, don't allow any transactions from Users.
3. Stock initialization: TC MCNB, structure 2lis_03_bx. (Here Select All Stocks(Including Non-Valuated)).
4. Statistical setup of mat movements: TC OLI1BW or sbiw path
5. Statistical setup of mat movements: TC OLIZBW or sbiw path for 2LIS_03_UM load.
In BI
0. Load initial stock: datasource 2lis_03_bx using InfoPackage and then Run DTP with the following options.
In DTP: Extraction Tab--->Extraction Mode = Initial Non-Cumulative for Non-Cumulative..select this and then Execute.
1. Cube>Manage>Collaps-->Don't select "No Marker Updating indicator" and then compress.
2. Load 2LIS_03_BF and 2LIS_03_UM Initial runs using InfoPackages and then Cube>Manage>Collaps-->Select "No Marker Updating indicator" and then compress.
Now check the data with MB5B In ECC and recon data with Report on 0IC_C03 Cube.
Thanks
Reddy

PR should allow to change after the PO

Hello
Creating the Purchase order with ref to PR, Once the PO is created with ref to PR with full qty then system should not allow to change the PR.
How to made this?
Regards
sapman man

Hi,
My Requirement is.....PO is created with ref to PR, then that perticular PR should allow to edit in ME52N .
it should allow only after the PO deletion, then system should allow to change that perticular PR
How do this?
sapman man

Not allow to change pricing condition in Billing,,,

Hi ,
I want to know the user exit or other solution for following:
System should not allow to change the value of basic pricing condition type in billing.
Ex. In sales order value of condition PR00 is 100, then it should not allow
to change the value of condition type PR00 in billing. If requires to change, it should allow
to change in sales order only.
Thanks & Regards,
Sachin

For this no need to use user exit
goto V/06 condition type details
choose which condition type u want to give display view
go to controlling tab or changes can be made , uncheck the value and amount fields. than system should not allow to change the condition type in sales order level also.
(or)
if u want in billing document only
configure copy controls between delivery document to billing document (VTFL)
goto item category, select item category (TAN)> details and add pricing type E.
try this
regards
siva

System setting does not allow changes to be made to object LSYS

Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammed

Dear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding

System setting does not allow changes to be made to object

Hi experts,
I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
"System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.

Hi,
If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
Or you can find the text in the note:
«/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
Regards,
André Nunes

System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30

hi,
Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
gives the following error:
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
Our support packages are as following:
SAP_BASIS       640                   0009
SAP_ABA         640                   0009
ST-PI           2005_1_640            0000
PI_BASIS        2004_1_640            0006
SAP_BW          350                   0009
BI_CONT         353                   0000
Could you please suggest or help us in resolving the issue ?
thanks and regards,
Yogesh

Hello,
the above mentioned note is too old. Please check note 781371.
Please also check in transaction SM30 view V_TRNSPACE
the record for /1SEM/:
Namespace:     /1SEM/
Namespace role C
Repair License
SSCR Popup     X
SAP Standard   X
Gen Objs Only X
Regards,
Gregor

System setting donot allow any changes

Similar Messages

Maybe you are looking for