System Setting for Package Check
Hi
How can the global 'package check' switch be activated or deactivated? Where is this customizing done? Is it possible to set the Package Check attribute specific to a package? How could this be done?
Thanks
Lakshmi
Hi Karun
If I set visible elements thro' package interface or if I specify use access for a user package, this will have effect only if the Package check is activated. For eg., even if I have specified the Error Severity as error in Use access for a provider package, SLIN does not show me an error even if I have used the visible elements of this package. This would happen only if the package check setting is active. I am not sure where this could be done.
Thanks
Lakshmi
Similar Messages
-
System setting for vendor evaluation incomplete
HI....
I want to caryout automatic vendor evaluation when i run t code ME63, its show an error system setting for purchase org incomplete where as i have maintained all the parameters from standarfd 0001, can anyone tell me how to carry out ven evaluation.
Regards
SARFRAZHi,
Select SPRO --> Materials Management --> Purchasing --> Vendor Evaluation. Select following criteria -
1) Define Weighing keys - Here define weighing keys in addition to 01- Equal Weighing & 02- Unequal Weighing (if required)
2) Define Criteria - Here 5 standard criteria are maintained. Maintain additional criteria if required. Also maintain sub-criteria. Each main criteria contains some standard subcriteria. If required you may maintain additional subcriteria upto 20 per main criteria.
3) Define Scope List - Here you may maintain how the evaluated vendors should be ranked.
4) Define Purchase Organization Data for Vendor Evaluation - Here you may maintain main criteria & sub-criteria for your purchasing organisation. Also maintain score for equal & unequal weighing. Maintain point score for automatic criteria for each percentage vainance
Hope this fulfils your query
Regards -
Is there any System setting for Update statement
Is there any setting for update statement related to implicit commit because Update statement in my code behaves differently in different systems.
My code is
Data: it_eaus like eaus occurs 0 with header line,
wa_eaus type eaus.
select * from eaus into table it_eaus where auszbeleg = '000000000001' and storausz = 'X'.
if sy-subrc = 0 .
wa_eaus-aedat = ''.
wa_eaus-aenam = ''.
wa_eaus-storausz = ''.
modify it_eaus from wa_eaus transporting aedat aenam storausz where auszbeleg = '000000000001'.
update eaus from table it_eaus.
endif.
Data: it_eausv like eausv occurs 0 with header line,
wa_eausv type eausv.
select * from eausv into table it_eausv where auszbeleg = '000000000001' and storausz = 'X'.
if sy-subrc = 0 .
wa_eausv-aedat = ''.
wa_eausv-aenam = ''.
wa_eausv-storausz = ''.
modify it_eausv from wa_eausv transporting aedat aenam storausz where auszbeleg = '000000000001'.
update eausv from table it_eausv.
endif.Hi
It isn't an alternative way: u can only explicit the COMMIT just as I said before:
Update DBTAB set COL.
COMMIT WORK.
Anyway just I said before the debugger can execute a COMMIT, from SAP help:
The New Debugger can run in exclusive and non-exclusive mode. Exclusive mode means that the application that is being analyzed exclusively occupies a work process of the application server during debugging. In non-exclusive mode, the Debugger functions are limited. In non-exclusive mode, after each Debugger interaction, the system requests a roll-out in the application. Therefore, an implicit database commit must be executed. This has the following consequences:
u25CF Debugging is not possible between the statements SELECTand ENDSELECTbecause the database cursor needs to be closed when using an implicit database COMMIT statement.
In this case, program execution is terminated.
· Debugging is not possible for conversion or field exits.
· Due to the implicit database commit, inconsistent datasets can occur in the database.
For this reason, non-exclusive mode is not possible in productive systems.
Max -
Where to System setting for Back-up (Tribe)
Hey Tribe
Do I just copy the system preferences app. as a back-up? If not where do I find the system settings for copy as this is the biggest B** about having to set every thing back up after a system restore.
KaisoKaiso,
Maybe someone with more knowledge than me in "restoring" the settings if needed might chime in and help you.
I have an external cloned disk and also use Backup from .mac.
Now, I would burn more than the Preference folder. I would burn the whole Library so you can have all your settings, mail accounts, KeyChain (passwords for sites, etc) -
What's the best Preferred Execution System setting for parallel testing run from TestStand
I configured what vi's I think need to be reentrant, but I am not sure what choice for "Preferred Execution System" is best for the vi's in my TestStand sequence that's going to run in parallel. Can anyone advise?
Thanks!Hi mike_22,
This option should not matter unless you have a LabVIEW VI with parallel code blocks. If this is the case, you can set your VI to Other 1 or Other 2. Please take a look at this knowledgebase for further explanation.
Cheers,
Kelly R.
Applications Engineer
National Instruments -
No setting for autodelivery checking for email
i noticed on the video for iPhone that it says you can set the amount of time or frequency of when you email will be checked. well, I have no such option and it is clearly in the video and in the Q & A. how can that be? I went to setting/mail and there was no such option. please help.
knightrider522,
If you have a POP email account configured on the iPhone it will be in: Settings, Mail, and then right under the list of mail accounts.
Yahoo for example uses push, and notifies the iPhone when new messages are available.
Hope this helps,
Nathan C. -
Mail set for manual checking but checks automatically
I am getting very annoyed with Mail since 'upgrading' to Lion and iCloud back in February
I have Mail General Preferences set to "Check for new messages manually", yet it checks my .Mac address automatically.
I have all my email accounts unticked for including "when automatically checking for new mail", yet it checks just my .Mac address automatically. This points to the problem being something to do with iCloud rather than with the new version of Mail that comes with Lion.
Not so annoying when I have the sound switched off but very annoying when I have the speakers on and it interrupts what I'm listning to. Sometimes it even makes the noise when there doesn't appear to be any new email.
Has anyone else had this problem? And if so, have you found a way to stop it?Same problem here after migrating from Snow Leopard to Lion & MobileMe to iCloud. I haven't found any answers online.
-
How do i setup the system setting for the graphics card in xp? what best?
Ok im trying to setup my system to play games well. i have a 2.0 with 2 gig ram. anyways how should i setup the driver thing under control pannel for the graphics? Whats the best settings as I am clue less at this. thanks like for the open gl under 3d? thanks again
Welcome to Apple Discussions
Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors -
Hello,
I have created a ECATT for master data uploading. This created a request number. Now when I am trying to create a BC set using tcode SCPR3 and attaching the above created request it is giving me the following error:-
Message Number: S_CUS_IMG_ACTIVITY230
Diagnosis
Logical object ECAT is a lockable (TADIR-mandatory) object.
System Response
Lockable objects cannot be included in BC sets because, during the activation process, an entry would have to be written in the catalog of repository objects (table TADIR). However, this is not possible with BC sets.
Procedure
The object cannot be used in BC sets.
Kindly guide me as to how do i resolve this error and attach my Ecatt request in the BC set.
Narendra
Creation of BC set for ECATTHi,
Check if this process helps u.
Procedure
Aassign existing preconfiguration, transactions or rReports
1. Go to the structure element to which you want to assign preconfiguration, in the project structure.
2. Choose BC Set, CATT, eCATT Test Configuration, Transaction, Program or Add-On Transport Request, in the Type column.
3. If it is not a process step, enter a component from the possible entries help in the Component field.
4. Make an entry in the Object column, or choose from the possible entries help for the Object field.
5. Save your entries.
Assign IMG objects
1. Go to the structure element in the reference structure to which you want to assign an IMG object.
2. Choose IMG Object in the Type field.
3. If it is not a process step, enter a component from the possible entries help in the Component field.
4. Call the possible entries help for the Object field. You go to the Implementation Guide (IMG) of the selected component system.
5. Choose one or more IMG object nodes and choose Select.
6. Choose Copy Selected Nodes.
You have now assigned an IMG object to a structure element.The system goes back to the Configuration tab and fills in the Object and Description columns.
Create and assign preconfiguration
1. Go to the structure element to which you want to assign preconfiguration, in the project structure.
2. Choose a Type.
3. To create a new BC Set, CATT or eCATT test configuration from the Configuration tab, enter a name in the Object field and choose Create.
4. You go to one of the following transactions, depending on the object type:
BC Set: BC Set Maintenance
eCATT Test Configuration: Test Configuration (eCATT tool)
CATT: Change test case.
5. Enter the data required to create a new BC Set, eCATT test configuration or CATT.
regards
Gokul -
Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKAYou can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks
-
How can I check and change the system set events trace level?
Dear all:
How can I check the system set events trace level? I don't want the alert_log so big.
Regards
TerryHi Terry;
Please check :
How to determine which system events are currently being set? [ID 845043.1]
How To List All The Named Events Set For A Database [ID 436036.1]
How to set EVENTS in the SPFILE [ID 160178.1]
Also check:
http://www.dba-oracle.com/t_grid_rac_events_in_Oracle.htm
http://www.akadia.com/services/ora_events.html
Hope it helps
Regard
Helios -
Hi ,
Can anybody tell me what is check package in Extended check of webdynpro application.
I am getting below error under package check when doing the extended check .
Program: /1BCWDY/GK2ISOBFBOQSBXDREA53==CP Include: /1BCWDY/B_GK2IUUMYK699PVEUQXPO Row: 195 [Prio 2]
Object WDYN ZPLANT_SH has insufficient authorization to use objects CLAS
CX_WD_BAD_STATE from package SWDP_RUNTIME_EXCEPTIONS
/1BCWDY/GK2ISOBFBOQSBXDREA53==CP in package ZPS2
USAGE_AFTER_DO_EXIT in package SWDP_RUNTIME_EXCEPTIONS
Package ZAA does not have sufficient use access
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
Can anyone suggest how to correct the above package check error.
Regards
Sireesha.Hi
When you use an object from another package then you have to add that package name in use access list of your package( available as a tab when you click on package ).
Concept is something like this-
You create objects in your package and expose them for use in another package by creating package interfaces
Other package who are using these objects will add these interfaces in their package use access list.
For your problem you need to add the relevant intrerface ( SWDP_RUNTIME_EXCEPTIONS) in your package ZAA use access list.
Hope this helps.
Regards
Manas Dua -
Conflict checking issues for package XYZ on zones a, b, c
Hello.
I'm trying to install postfix from Blastwave on a Solaris 10 U4 Sparc system with two non-global zones installed. To do that, I do:
adm@winds02 ~ $ sudo pkg-get -i postfix
No existing install of CSWpostfix found. Installing...
Pre-existing local file postfix-2.2.8,REV=2006.03.13-SunOS5.8-sparc-CSW.pkg.gz matches checksum
Keeping existing file
Analysing special files...
## Verifying package <CSWpostfix> dependencies in zone <ldap-client>
## Verifying package <CSWpostfix> dependencies in zone <ldap-server>
Conflict checking issues for package <CSWpostfix> on zones
<ldap-client, ldap-server>.
Do you want to continue with the installation of <CSWpostfix> [y,n,?] How do I find out, which issues there are supposed to be?
Thanks,
AlexanderYou could also try using an admin file that should answer those questions for you
I usually use something like:
mail=
instance=unique
partial=ask
runlevel=ask
idepend=nocheck
rdepend=ask
space=ask
setuid=nocheck
conflict=nocheck
action=nocheck
basedir=default -
Set the Unicode check flag for all programs.
Hello friends,
We are now upgrading our ecc6 system to unicode. The problem is that all our programs
are not flaged for unicode checks and there for have syntax errors. I now how to mark
this flag for a single program but how can I do it to all programs?
I realy need your help.
Thanks in advance,
Gershon.Hi Gershon,
In general, transaction UCCHECK is designed to cover all Unicode adaptations needed. The guide called
u201CRequirements of ABAP Programs in Unicode Systemsu201D, which can be found via:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b02d3594-ae48-2a10-83a7-89d369b708e5
gives customers a comprehensive description of possible errors. Please also have a look at the docu provided directly in transaction UCCHECK. In addition, SAP notes 1322715 (search for UCCHECK) and 1319517 (point 8.) might be helpful.
Please note that customer programs have to be adapted - simply setting the Unicode flag works only for the objects with a green traffic light in UCCHECK .
Best regards,
Nils Buerckel
SAP AG -
Set Up Authorization Check for G/L Accounts into PO creation
Dear friends !
How could I activate check to the access to certain accounts into PO creation ?
I know that is possible to activate this into Purchasing customizing under path
SPRO > Materials management > Purchasing > Purchase order > Set Up Authorization Check for G/L Accounts
But could I use it to give access only to certain GL Accounts by user ? Is this the purpose of this customizing ?
If yes what´s the object should I use to link with user account !?
best regards,
AleHi ,
After you setup the configuration in transaction OMRP, please setup up
the authorisation group in the account code (FS02, the field is on the
"Control", technical name is BEGRU).
When a account assigned purchase order is created, the system checks for
object F_BKPF_BES with values from the BEGRU and activity 01.
Maybe you are looking for
-
Wireless fails after Lenovo driver update (X40 23718EU; Atheros 11b/g Mini PCI)
I use Windows XP SP2. My wireless LAN adaptor driver was old (ver 3.1.102.23) and did not support WPA2 protocol so I updated it from the Lenovo site using this driver download: Windows XP, 2000 06 Oct 2009 v7.6.1.260b Immediately afterward on I
-
How to know whether object is locked
Hi All Experts, Which table holds the dynamic objects(Lets say a PP order) which are locked. I mean lets say I am editing some PP order 012344567 through tcode CO02 and after this in another session this PP order is also in use in some other transact
-
"My Contacts Only" not working With SMS
Hi, there. I would like to know if the "My Contacts Only" block in [Settings > Notification Center > Message] works only with iMessages or if it includes SMS also. I'm from Brazil and here we get a lot of spam messages via SMS. Even though I got this
-
Still freezing (!)
http://discussions.apple.com/thread.jspa?threadID=2294629&tstart=195 I posted a thread a few weeks ago, explaining the issue I was having with my macbook pro 15". The computer would freeze, for a stretch, almost once each day, while I was simultaneou
-
Class.forName(driver) = ClassNotFoundException
hy all! the following statements causes an error: Class.forName("oracle.jdbc.driver.OracleDriver");I printed some informations about the exception: Errorcause: null Errormessage: oracle.jdbc.driver.OracleDriver Class: class java.lang.ClassNotFoundExc