System settings for bdc?

hi frenz!
are there any system settings for running a bdc automatically in background?
the problem i am facing is that my bdc code is running in the background as required in the devlopmant system whereas when i move the same code to the quality system i have to go and execute the bdc explicitly in sm35. Please advice.
as an additional peice of info im using call transaction method and the mode used is P..

HI Payal
I was also once getting the same value of sy-subrc.
My problem was with recording.When i was running in foreground,I was pressing the buttons(ok_code)
but in background it was not possible very obviously
so I checked my recording and the problem was solved.
Secondly, check if you are hardcoding a request no somewhere
as while running a bdc it may asks for a request
but it wont be in quality.
Please revert back in case of problems
Please reward points.

Similar Messages

System settings for purchasing organization PO01 incomplete

Hi!
I've been doing a vendor evaluation but I got this message: System settings for purchasing organization PO01 incomplete. Kindly assist me where in SPRO can I fix this. Thank you.

hi,
Define Purchasing Organization data for vendor evaluations in transaction OMGL.
Hope it helps..
Regards
Priyanka.P

Use System settings for proxy

You should allow the Mac Desktop version to use the system proxy settings. Curerntly, I have to switch my proxy settings everytime I leave/return to work. It would be better if Spotify just used the Mac OS system settings for the proxy. Most other software does this. And this is why there are system settings in the first place, so other software can take advantage of them.

Good news everyone! Apple Music iTunes perfectly uses the system proxy settings, even when they are set to socks, and that without a restart from the client. Seamless integration, works perfectly.

Making system settings for measurement documents and measuring point

What is the significance of making system settings for measurement documents and measuring point in spro?
Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

System settings for purchasing organization 1000 incomplete

I have done Vendor evalution setting for one purchase organization.
then i went to t.code : ME61 For maintain vendor evalution while doing i got error message like " System settings for purchasing organization 1000 incomplete ".
Please anyone help me out in this

Hi
Which Criteria you are evaluating standard or custom?
If you are doing Vendor Evaluation for Purchasing Org 1000, you need to complete the assignment of Criteria, Sub-criteria, Weighing keys and Maintain Purchasing Organization data.
Thanks
Prashanth

System Settings for Kodak Zi6

Yikes, this is driving me nuts.
When I export from FCE for youtube, I'm getting some funky borders/margins. And I think it is my system settings.
I'm eager to export to 1280 x 720, as that is what YouTube says is it's max.
What do I set for System Settings for the HD from a Zi6?
Thanks so much.
Brad
For a bonus question, do I have to change the settings when I use lower quality video from my Casio Exilim, which I only rarely use, but sometimes like to mix video from that camera in w/ video from the Zi6
THANKS!

here's the youtube video to see the margins http://www.youtube.com/watch?v=4B9SkvhoUYw

What are the correct setup and system settings for importing HDV video from tape?

I keep trying different "easy setups" and system settings/preferences in order to import both the audio and video from HDV recordings on miniDV tape to no avail in either FCE4 or FCP5. I import via firewire from the camera. My computer "sees" the camera and controls playback (I can hear the audio) but no video displays for capture (just color bars).
My camera is a Canon Vixia HV40 and my computer is a MacBook Pro running Snow Leopard 10.6.8.
I've tried the HDV easy setup...no video...
I've tried HDV 1080i/60 as I saw recommended somewhere else...no video...
Captures standard video just fine but I'd like to try editing some higher def footage.
Any suggestions?
Many thanks.

The combination of all these helpful ideas solved the problem.
I set AV settings to HD and Apple Intermediate Codec HDV 1080i/60 AND set the cameras output to "locked" HDV. Funny, it had been on "A" (Auto) before and should have simply sensed the need for HD output. I then tried to capture using "A" again and this time it detected the difference between SD footage and HDV footage (I had clips of both kinds on the same tape).
I ran similar capture tests on FCP 5.1, FCE 4, and FCPX and all three programs captured HDV video and audio.
Thanks again everyone. Be sure the camera is set to output HDV or "A".

System settings for XI

Hi,
Could some one please explain me on the important steps/settings to do for accessing XI system at remote from our laptop ?
Would be better if someone provides in a step-by-step process?
Regards,
Alex.

Hi Alex
R u able to connect to XI server. Can u please check this first???
There are standard communication ports that are created during installation. The system uses an internal port calculation to determine the required ports, which helps to prevent port conflicts. The system uses an internal port_index and system number for the calculation. For example, 50000100*snrport_index.
Example results:
Admin Tool: port 50004
Telnet: port 50008
Ports used by the J2EE engine can also be configured individually using the Visual Administrator, which is a tool that can be used to administer the Java instance. Another component of the J2EE Engine is the Software Deployment Manager (SDM), which runs on a Java instance and must be configured to manage the Deployment of Java2EE applications.
As the system offers both ABAP and J2EE, each instance must contain an Internet Communication Manager (ICM) that receives the web request and distributes the request appropriately. The operation of the J2EE Engine also requires that the following services are configured in order to active the Java instance in the Web AS:
Regards
Abhishek Mahajan

Did Lion eliminate the finger gestures for show the previous page and show the next page? I've checked system settings for the track pad and it looks like the got rid of one of my favorite finger gestures when browsing the internet. How do I get it back

I've upgraded to LION. It looks like LION eliminates the finger gestures within internet browsing that used to yield navigating to the previous page or navigating to the next page. I think it was a 3 finger swipe to the left and a 3 finger swipe to the right. It looks like this has been eliminated. I've gone into the system preferences and went through all the new settings for the track pad finger gestures. I've not found a combination that allows me to swipe on the track pad to do the page forward / page back function.
How to I get this back? I was my favorite one and now I can't get there!

For going back to the previous page try a 2-finger gesture. Two fingers in the other direction will take you back.
cornelius

"Use system settings" for Proxy is automatically enabled when opening Firefox. Why? I want to use "No Proxy".

When I open Firefox, it requires time to load pages. When I go in the networking, I activate "No Proxy" from "Use system settings", and each time I reopen, the System Settings is back, and the page load slow.

Hello serman77, check '''IF''' you have in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] a [http://kb.mozillazine.org/User.js_file User.js file].
The user.js file does not exist by default. If you create the file, forget it, '''if you have not create the file then delete the User.js file''', to see if the problem goes away (some programs create and write in the file also).
'''If you have not a user.js file''' then see : [http://kb.mozillazine.org/Preferences_not_saved#Corrupt_or_damaged_prefs.js_file Corrupt or damaged prefs.js file]
thank you

System settings for rendering

Hi
I import HD movies into FCE and that is working perfect. I have trouble when I will play the different takes in the time line - and I am not able to do it without rendering all the time (I have a MacBook Pro and a fast external disk). Any suggestions what I might be doing wrong. Is it my system setup which is wrong or maybe I have to live with it.
Thanks for any help given
GS

I found something in the "Log and Transfer" window from where I normally import my material. In the windows preference I changed the AVCHD import option from Apple Pro Res to Apple Intermediate Codec.
Now I can get the video to play in the time line if I set my settings to "Playback Video Quality=low" and "Playback frame rate=quarter". The line then turns orange - but I am not able to make Video transitions in real time.
Maybe my system is too slow?
The properties still says "framerate 1920X1080".
Hope this helps a bit...

Global system settings for Firefox 5 on Ubuntu 11.04

I need to set the default home page for all users on Ubuntu 11.04 systems running Firefox 5, but it doesn't seem to work like it did in previous versions.

OK , I have checked the log files for the server - it says it is using NON-BLOCKING source file:/dev/urandom
Looks like this must have been sorted out in 10.3.5 as it recognizes the Linux System.
I have the same issue on all 6 of the servers I have installed - so this may be a different issue.
These are BL460c g6 HP blades in a c7000 chassis.
So now I am at a dead end.
The initial wait is still considerable, but we may have to live with this (Ubuntu Server 11.04 is still new and probably not supported well at this time)
The admin console works fine once it initially opens and is fast.
I tried the java command as well and got an error finding the main class in weblogic.wlst, (not the end of the world).
all in all though it looks impressive right now, aside from the minor admin stuff, my application runs fine (which is what counts in the end).
I will leave this open so that anyone else can view it and make suggestions.

System settings for imported p2 files in fcp

Hello, Everyone
My name is Jackie and I am new to the apple disciussion forum. So I hope I am doing this right. I need help exporting my Project. Currently I am exporting using Quick Time Movie within FCP and the quality of the files are awful. I understand that my mxf files (footage originally shot with P2 hd cards) are imported as quicktime files but I was under the impression that the quality of my footage would stay the same.I think maybe some of my settings are incorrect just not sure what they should be dvntsc or hdv 720 p60 as far as sequence presets. Maybe I am completly off base. currently I have exported sequences using qt movie in hopes to create a dvd but every time the quality is really fuzzy. Please educate me.
Sincerely, Jackie

Welcome to the forums.
Imported P2 files are the exact same quality as the original MXF files. And the codec they employ is DVCPRO HD. Might be 720p, might be 1080i...whatever format you shot. Zero quality loss.
Exporting for...what? how? You must know tht you cannot judge the quality of the footage on your computer monitor...
#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
TO view your HD files you need to get a capture card and an HD monitor.
Shane

Problem with system settings for different project.

Hello, I have something that pauses me a lot of problems. I work on different editing projects with deferent externe Hard Disc. I have 3 of those but on each one I have the video and sound and render...importation for one specific project. The thing is that I want that FC automatically changes the setting to where make the saves and import the new material (video cassettes...). It means if I open a project in disc 1 and import video it does not put it in disc 2 just, disc on witch I worked juste before on an other project. I'll have a lot of off media problems and risks of loosing things...
What can I do ?
Thanks for reading !
Message was edited by: Napoléon23

YOu have to manually reset the Scratch Disk for each project you open. There is no automated way to do this in FCP at this time.
Shane

System Settings for E-Recruitment

Hi All,
Please can you tell me what are the System Parameters need to set to start E-Recruitment Configuration. Please note that ECC and E-Recruitment are on the same system.
Thanks in advance
Suchitha.

Use transaction SICF and check all services that start with HRRCF are active
Use SE38 and run RCF_GENERATE_URLS

System settings for bdc?

Similar Messages

Maybe you are looking for