System should allow to post to bank account with the available cash for cash account in fbl3n

Hi Friends,
User is posting Bank account Dr to
Cash account Cr
If cash account balance is 40000 in FBL3N, and if user posting more than that amount, then system should not allow to post
in F-02 and FB50 transactions.
Pl help me out
Thanks,

Hi Mahesh,
I think we cannot go for cash Journal, because for the below entry i should make the cash account
settings as post automatically only in FS00 transaction.
Bank account Dr to
Cash account Cr
If that is the case then we cannot post manually to the cash account.
I think we need to go for some exit in validation.
correct me if iam wrong.
Thanks

Similar Messages

System not allowing to select two bank accounts for the Edit proposal F110

Hi
I have created one house bank and two bank accounts with two seperate check lots.
I have assigned two varianats with seperate check lots in the payment medium tab in F110.
I posted one payment run with one accout. when i am trying payment run for two accounts,in the Edit proposal reallocate tab I tried to assign two accounts for two invoices each one, but system is not allowing to assingn the 2nd bank account in the Vendor invoice. I assign this bak account in the Vedor master also. Please help
Prabha

Hi,
If you are trying to post for a single payment method to different account id's for the same currency, then system wont allow this combination.
You need to check the same in FBZP under Bank determination.
Make sure, if payment method is same and you need to post to different account ids then the second account id must have a different currency.
This is a basic requirement from SAP side.
Check the same
Regards
srikanth

System not allowing to select two bank accounts for the proposal documents

Hi
I have created one house bank and two bank accounts with two seperate check lots.
I have assigned two varianats with seperate check lots in the payment medium tab in F110.
I posted one payment run with one accout. when i am trying payment run for two accounts,in the Edit proposal reallocate tab I tried to assign two accounts for two invoices each one, but system is not allowing to assingn the 2nd bank account in the Vendor invoice. I assign this bak account in the Vedor master also. Please help
Prabha

Hi
I have created one house bank and two bank accounts with two seperate check lots.
I have assigned two varianats with seperate check lots in the payment medium tab in F110.
I posted one payment run with one accout. when i am trying payment run for two accounts,in the Edit proposal reallocate tab I tried to assign two accounts for two invoices each one, but system is not allowing to assingn the 2nd bank account in the Vendor invoice. I assign this bak account in the Vedor master also. Please help
Prabha

System not allowing to post parked vendor invoice

Hi gurus,
Why system not allowing to post parked vendor invoice when workflow is used for gl document?????
It is saying not released and no one is allowed to post???
Thank you

Hi Mohit,
Post can be possible to next authorized level. Check settings or else go to FBV3 ,enter document number ,company code and year > Enter > where you can see the workflow tab > Click on that where you came to know how may release levels are assigned.
In same view > Click on system in menu bar > services for object > Click on workflow icon > where you came to know who is the next approver.
Regards
Mani

System is allowing to post the Adv Pmt amount more than the PO Value

Hi Experts,
I am FICO Consultant. I facing one problem regarding Advance Payment. We have a process to for making advance payment with reference to Purchase Order and Purchase Order Line Item. But system is allowing to post the advance payment amount more than the Purchase Order Value. I want to prevent this to happen. The system should not allow to make advance payment more than the Purchase Order value.
Please help me on this issue.
Thanks in Advance and Regards,
Alkesh Mistry

HI
Please create the Advance payment request with PO number using sp gl indicator as F and then make the advance payment using the request.
Regds
Rajiv

System not allowing to post profit center

HI
I am doing manual FI posting. system not allowing to post to desired Profit center.
every time it is taking Dummy profit center. even if i am changing to System throughing message
(Dummy profit center set )
i have not assigned the profit center to cost center. because i service ( created as cost center) are used in different profit center,
i am doing only FI posting but system taking Dummi profitcenter..
Regards
Ds

Hi,
The concept of dummy profit center is to capture the costs of the transaction where the profit center is not assigned to
any cost center. Instead you can define a service profit center and assign in the service cost center so that all the cost are
accumulated in the service cost center. If other profit centers are assigned to respective cost centers excepting the
service cost center, you can manually repost the cost through KB11N. As a second option you have distribution
cycle set for profit center for month end processing so that the service profit center will distribute the values to
the respective receiver profit centers either with fixed amount or fixed percentage.
Regards,
Sadashivan

When create RO against contract system should allow to create RO 10% tolera

Hello,
My scenario is when create release order (RO) against contract, system should allow to create RO against contract value 10% tolerance on total value of the contract.
Please let me know what are the configuration settings needs to be done.
For ex: contract value 1000 USD
So system should allow to create RO against contract 1100 USD it means 10% tolerance on contract value.
It seems nobady have idea on this issue
Thanks
Edited by: sapmm99 on Apr 19, 2011 8:11 AM

you idea is just in conflict to SAP design and as well it does not follow the good business practise and violates the meaning of a contract.
a contract is a written agreement between vendor and you (customer) that fixes a certain quantity at a certain price for a certain period.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/75/ee0ee555c811d189900000e8322d00/content.htm

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

TS1363 My iPod got stolen and I just want to get my visa card off of it. What should I do? I don't have the serial number for my iPod anymore either cause I got it along time ago... I never saw this happening.

My iPod got stolen and I just want to get my visa card off of it. What should I do? I don't have the serial number for my iPod anymore either cause I got it along time ago... I never saw this happening.

Sorry to hear that.
Lost or Stolen

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

Am i allowed to publish an app made with the AIR 3.5 SDK in the app-store yet?

Hello,
Am i allowed to publish an app made with the AIR 3.5 SDK in the app-store/android market? Im quite confused about this since AIR 3.5 has already been released yet the SDK remains in Beta.
I know that in the past it was not allowed to publish an App with an Beta-version of an SDK.
Can anyone clear this up for me?
Kind regards,

AIR 3.5 beta removed the watermark, and I actually released an app to the app store with the beta version. I'm not sure if Adobe intends to continue with this for future releases or if it was just for iPhone 5 stuff that needed to be released quickly. AIR 3.5 is currently out of beta though and was actually updated today, so feel free to use it to submit apps to whichever app store you would like.

Firefox does not allow my on-line bank account security phrase to be retained - why?

Hello,
I have successfully used MS Internet Explorer to log into my on-line bank account in the past. Since changing to Firefox my login process has become incumbered. The bank requires a security phrase as a part of an initial personal PC to bank account security setup measure, which security phrase information is supposed to be retained on my PC for subsequent logins into my on-line account. I still need to enter the usual username and password, but for some reason Firefox does not allow the security phrase information to be retained on my PC and so I have to enter the security phrase each time I log in. I called my bank's IT department and together we tried changing some Firefox settings, but none of them fixed this problem. I also have AVG and Super Antispyware loaded on this PC.
Do you have a solution to this problem?

The arrow to open the tab history of the Back and Forward buttons has been removed in Firefox 4.
Use one of these methods to open the tab history list:
* Right click on the Back or Forward button
* Hold down the left mouse button on the enabled Back or Forward button until the list opens
You can look at this extension:
* Backward Forward History Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

FV50 should only allow to park and Fbv0 should allow to post

Dear Gurus
We have a requirement where we want users to park document via transaction via fv50 and post via fbv0, as transaction fv50 does allow users to post , I have tried to create transaction variant shd0 and hidden posting option but user still able to post it via simulate and post
then I have tried following
IF sy-tcode = 'FV50'.
t_exctab-okcod = 'BU'. " do not allow to post
APPEND t_exctab.
ENDIF.
this does remove post option from fv50 but the problem is , we can not post parked document via fbv0, as this uses same trans fv50 in background,
any suggestion will be highly appreciated,,

Hi,
I do not think you can do it this way. If they park a document using FV50 and you use BTE 1140 to exclude 'BU', then, as you already noticed, when they try to post using FBV0, the system translates it back to FV50. This is like Godel's logic, Ecsher's sketch, Bach's Canon (just kidding). Anyway, what you are trying to tell the system is 'FV50 is only allowed to park AND FV50 is only allowed to post'
I am not sure but I think you can try to do it by first only allowing FV50 to park; then, configure a variant transaction, say ZV50 for posting. If the variant transaction has the problem of simulation interfering with the variant, you can impose an FI validation on it. The validation calls a user exit in which you specify IF SY-UCOMM = 'BU'. b_result = b_true. ELS. b_result = b_false. The reason I am not sure of this approach is because I do not know whether ZV50 will still be translated back to FV50.
Just a side note, you might also want to give consideration to other transactions like FB50, FB01, F-65 etc, since these transactions allow both park and post.
Regards,
Ming

Post multiple bank statements on the same day

The processing of electronic bank statements on a daily basis had to stop so that a more critical issue could be fixed. Now that I am two months (April and May) behind and the critical issue has been resolved I would like to catch up with the processing but not post the statement back to the original statement date in April or May since the GL Cash accounts have been reconciled for those previous months. I want to start processing as of June but I receive an error indicating that the "statement already exists; entry ignored". The system is evidently assigning a statement number to a particular date and not allow more than one statement to be processed in a single day. Is there any way to post more that one statement on a single day using tran FF_5 or any other way? I have already tested altering the date within the bai text file.

Since only one bank statement can be processed per day, I had to go back for the two months I was behind and process the files day by day until I got caught up to being current.
If I really needed to process many bank statements simultaneously, I could have created one bank statement manually and add all transactions and bai codes from many days and process that bank statement on a weekend date that would not be used by another statement date.

System should check chepter id when i am creating the excise invoice.

dear sir.
when i am creating the excise invoice in J1IIN , system should check chapter ID is maintained are not for the material in J1ID.
if chapter id is not maintained in J1ID for the material, system should give error or warning message when i am creating the excise invoice in J1IIN.
Please help me out this issue.
regards
jrp

In fact, when you are creating billing document, system will give a warning message that chapter id is not maintained for that material and the duty values will be zero in billing document.
As I dont have access to SAP, not sure on the warning message number. Try for a material without maintaining the chapter id in J1ID, note down the warning message number and convert it into an error message if possible.
Alternatively, you can try with the user exit J_1I7_USEREXIT_EXCISE_BEF_SAVE to meet your requirement.
thanks
G. Lakshmipathi

System should allow to post to bank account with the available cash for cash account in fbl3n

Similar Messages

Maybe you are looking for