System should not allow to do the changes in PO once the ID created.

Hi All,
Once the Inbound Delivery is Created based on the Purchse Order, System should not allow to do the changes in the Purchase Order like Deletion of Item, etc..
Any Configuration Changes is avaliable. ?
Regards,
Sudhakar

Dear,
Please check the staus in order
Current order status xxxx does not allow goods receipt (Message no. C6009)? is this the message?
This will not allow you to do GR for production order when you activate status profile "SAT1" in the production order. After that when you confirm order it will automatically assign next user status i.e. "SAT2" (if not assign it manually in CO02) it will allow you to do GR for that production order.
Regards,
R.Brahmankar

Similar Messages

  • QA32: Without going in Inspection lot stock screen system should not allow for UD

    Hi
    At the time of UD "without going in Inspection lot stock screen system should not allow to save the UD".
    Please suggest how to restrict.
    Regards
    Ashish

    Please go through the below link & with small changes you can fulfill  your requirement using user profile
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601c82e3-b743-2c10-dbb6-ed4c00167157?QuickLink=index&…

  • After creation of PO system should not allow to change the price in PO

    Hi There,
    In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
    So please advice.

    Hi,
    you could set in customizing for field selection keys the net price      
    to display for ME22N so that changes can not be made         
    (transaction OLME -> purchase order -> Define Screen Layout at Document Level).
    Please check that you have set all the relevant field selection      
    groups to display: AKTV, ME22, ME22N... (read and apply note 30316)                                                                               
    Other workaround is try to do by yourself with the badi                      
    ME_PROCESS_PO_CUST and send your own error message.    
    Regards,
    Edit

  • During PO creation system should not allow to save if it cross the PR value

    Hi,
    As I said in above subject line while creating the PO system should not allow to create more than the PR value and Quantity.
    Always system should allow the person to create the  Po with in PR value as well quantity in order to set up please let me know the configuration settings.
    thanks in advance.

    Hi,
    Please search the forum first for your queries for existance and then post queries., coz, the same question has been answered so many times before.

  • System does not allow to me to change collect method in RZ20

    Hi.
    I Have the problem with my SAP R/3.
    I have productive, based on 4 application servers. In RZ20, alerts of  MTE Operating System for one application server is not work. In nodes properties I have collect method "CCMS_Cpu_Collect_c". On other application servers - "CCMS_OS_Collect". System does not allow to me to change collect method
    What will I do? Please help me.
    Edited by: Viktor Unsub on Jul 18, 2008 4:55 PM

    Hello Victor,
    the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
    As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
    If the MTE doesn't display data you should check if the agent is running.
    Regards, Michael

  • System should not allow to add line items in delivery

    Hi,
    1) system should not allow to add line items in delivery( in reference to sales order or STO)
    2) sales order/STO should not be changed if delivery exists
    how to control the above
    Alec

    Hi Lakxmi,
           I found answer for 1st point from you are old answers.
          can you throw somelight on 2nd point.
    Thanks
    Anil

  • System should not allow to delete PO line Item after GR/IR

    Hi,
    I am working on a SAP Retail Implementation project.
    Currently the system is allowing us to delete the PO line items after doing GR or IR against that PO line item. But the clients requirement is that the system should not allow to delete PO line item after doing GR/IR.
    We are using Account Assignment Category-N, Item Category-S.
    Please let me know if you have the solution for this requirement.
    Thanks in advance
    Thanks & Regards,
    Suresh

    Hi,
    Standard SAP will not allowed the PO to be deleted once it was GR done. The controlled is on the attributes of message to set as "E"
    Message no. 06115
    But if invoiced takes place, the is the point that PO can be deleted.
    You have to do have a Enhancement using MM06E005, insert you logic here to check PO history tables like EKBE, then check if invoice " Q" (BEWTP) exist, the PO cannot be deleted once the user delete the PO line and SAVE it. Ask you developer to help you on the following coding.
    Use MM06E005 and EXIT_SAPMM06E_012
    IF SY-TCODE = 'ME22N'.
    IF sy-ucomm = 'MESAVE' OR SY-UCOMM = 'YES'..
    LOOP AT TEKPO.
    IF TEKPO-LOEKZ = 'L'.
    SELECT SINGLE BELNR FROM EKBE INTO BELNR1 WHERE EBELN = TEKPO-EBELN AND EBELP = TEKPO-EBELP AND BEWTP = 'E'.
    IF SY-SUBRC = 0.
    SELECT SINGLE BELNR FROM EKBE INTO BELNR2 WHERE EBELN = TEKPO-EBELN AND EBELP = TEKPO-EBELP AND BEWTP = 'Q'.
    IF SY-SUBRC = 0.
    Regards,

  • System does not allow to void the payment on same day

    Dear All,
    System does not allow to void the payment on same day in R12. e.g. If payment is made on 18-NOV-2010, system does not allow to void on 18th. We can void payments if void date is greater than payment date.
    Please let me know if you have any information to void payments on same day.
    Thanks in Adavnce.
    Thanks,
    Astik

    Hello Victor,
    the data collection method CCMS_OS_COLLECT is an ABAP report as you can see in the method overview in rz21. This report is used to collect the operating system data and send it to the CCMS.
    As soon as you install the sapccm4x agent on an instance the agent will take over the data collection for the operating system subtree (this is also described in [note 522453 |http://service.sap.com/sap/support/notes/522453]. Important: point 4. of the note!). I.e. as soon as the agent is responsible for the data collection you will see the mentioned CCMS_Cpu_Collect_c.
    If the MTE doesn't display data you should check if the agent is running.
    Regards, Michael

  • Once payment received  for bill system should not allow to cancel

    Hi  Experts ,
    we have created  commercial  invoice  and posted to fi document and    payment  received  from party.but when  we  try to  cancel  the same billing document system allowing  to  cancel the document.So Client  requirement  is once  payment received from party system it  should not  allow to cancel the billing document.
    Please  give  your  valuable suggestions on the same ...
    regards...
    MM

    Hello,
    In the Tx VOFA for the billing type to be cancelled(Ex F2), please
    fill the field Copying Requirements(V_TVFK-GRBED_S) with '29'.
    This routine prevents the cancellation of the billing documents which
    have been cleared.
    Regards,
    Raghavendra YN

  • With out goods issue for order system should not allow for order confirmati

    Dear all
    with out goods issue system should not allow for order/operation confirmation.
    how it is possible.
    Regrads
    Srinivas

    Dear ,
    In some cases we required to do confirmation or TECO without GI .
    We can change it as per req using user exit
    Regards,
    Ishwar

  • Delivery is invoiced fully so system should not allow to create 2nd invoic

    hi Expert,
    my issue is, once invoice is created for delivery.
    system should not allow user to create
    second invoice for same delivery number.
    where to check the confiurtion to stop such
    behaviour
    waiting for your reply
    thanks
    Alicia

    Hi Alicia
    In the copy control from delivery to invoice - T code VTFL
    you can maintain the copy routines. try maintaining routine
    3-- which is delivery reatled header
    4-- which is delivery related item
    also at item level copy control you may add the check in billign quantites
    this would stop formc reating another invocie
    Hope this helps
    Thanks
    Akasha

  • Without result recording closing system should not allow for usage decesion

    Hi
    without result recording closing system should not allow for usage decision.I think it is possible through user status. Please tell the procedure .
    Thanks and regards,
    vairavan

    Dear vairavan,
    You can check for the authorisation object.I can't remember that authoriation object right now.But surely you can restrict that with authorisation object.
    Anyone knows the authoristaion object.
    Regards,
    Sunil Patil

  • Sytem should not allow to save the sales order based on risk category

    Hi,
    My user want to control the creation of sales orders based on risk category in credit control area.
    We created a new risk category - 30 Not authorized.
    And we made necessary configs also , like assignment of risk category and company code in OVFL.
    We assigned 30 risk category in FD32 for customers also.
    But while creation of sales order system is allowing to save the order.
    My user requirement system shoud not allow to save the sales orders for those are customers belongs to 30 risk category.
    How can we config. this
    thanks
    Sateesh

    hi,
    dont want to save the sales order if the credit limit exist ?
    then maintain block in OVA8
    choose
    your credit control area         risk categories             credit group
    1000                                        30 Not authorized           01
    checks tab
    choose static and maintain B
    this will give you error message and it will not allow you to save the sales order
    regards
    senya
    Edited by: senya_1111 on Oct 1, 2009 2:26 PM

  • System should not allow PO beyond Maximum price.

    Gurus,
    My requirement is as follows:
    I have a material which has a Max Purchase price of 100.Now whenever I create a PO system should not allow me to create a PO beyond 100.
    Pl suggest a way out
    SN

    Hi,
        According your rquirement while creating  PO , material price ( that  should be a condition based) does not cross your price limits,
    In PO we have number of conditions like
    Gross price
    Discounts
    Surcharge
    etc........so on
    for each condition type we can give upper limit while maintaining Material-Vendor info record(vendor -material specific).for this combination only it's works.
    Regards,
    Venkat

  • System should not allow me to create a PO more than the Maximum quantity.

    Gurus,
    My requirement is as follows.
    I have a material with Max quantity defined as 100.
    Now I have a stock of 60 & Open PO of 20 so the system should allow me to create PO only for 20 Qty.
    It should restrict me if the Quantity exceeds 20.
    Also inform us where to maintain the Max stock quantity for the material.
    pl suggest
    SN

    Hello Sanjay,
    There is no way to maintain the Max stock quantity for the material.
    However, for the first issue, I would like to tell you that while creating PO in Item detail tab there is a tab of delivery. Under this tab you can set the under delivery or over delivery(as per your requirement).
    for example, if you set the overdelivery to 10% and you created the PO of 100 quantity then you have the flexibility of receiving upto 110 quantity which is 10% more of the actual quantity.
    If your point is something different from what I explained then kindly re-elaborate your query.
    Hope this helps...
    Robin

Maybe you are looking for

  • How do I deal with a fire wire HD after iSight has corrupted all the files?

    Hi When I bought iSight I was unaware that it works with pityfully few firewire hubs such as Belkin powered FW hub. I corrupted two drives before asking the forum who were very helpful. After the corruption the files could not be read from the HD nor

  • Split Message Error

    Hi, I'm doing a split message without BPM, but I have found a weird error. When I change the ocurrences to unbounded (1:N) in target structure I am finding this error. http://picasaweb.google.es/hose86/SapXi#5324222633504070658 In the picture above a

  • Lens Lists in Lens Correction Lightroom 5 in Mac

    I have a long list of lenses in Lightroom 5 on my PC but with the Mac there is  very limited list for Nikon. None of my lenses appear in this on MacSame version. Can I download an updated list into the menu?

  • Plz need help with this hashmap program

    as far as i know, this hashmap program works, but i cant get it to compile correctly because of one line error: phoneArray[2] = int f; the second position in phoneArray is and will always be a number, but the array is a String array, making it diffic

  • Variable exit populates value in RSRT And bex analyzer but not on web

    Hi everyone I am trying to populate my end date with the number of days, and it gives me the right result everytime I execute the query in RSRT or when I go through the BeX analyzer in BI 7. So when I put 30 days, my end date automatically gets popul