System shuts down and restarts without saving data
Hi, I've had my MacBook Pro for over 2.5yrs and have almost no issues with it until recently.
This morning when I sat down to work my system kept shutting down on its own every 25-30mins and would restart too. I keep losing all my data and kept having to start over. This has never happened before.
Pls help!
P.S.: I dont know if this info helps, but I just started using my new 85W MagSafe charger, since my old charger conked off recently. The charger seems like its original except I had to connect it to my old adapter since the new charger's head doesnt fit into any of my available switch boards. Oh and the left side of the laptop and (the box part of) the charger very quite hot when the system switched off.
I read in one of the Apple discussions that it maybe a hardware issue and to run a hardware diagnostic test at start up. But although i tried to run the test by pressing and holding 'D' key before the grey screen appears at startup, nothing seemed to happen and the system started up normally.
It's possible that the new charger is defective or that the magsafe board in the computer itself is failing. You said your old charger failed, what made you think so?
The easiest thing to do is take both the MBP and the charger into the Genius Bar if you can. The eval is free. If it's the charger, they'll replace it. If not, at least they can tell you what the problem is. This is a genuine Apple charger, right?
Similar Messages
-
After installing the latest version of IOS my iPhone 4s rapidly runs out of power, it also suddently (fully charged) shuts down and restarts without me asking for it. I tried to reinstall the latest version of IOS but it doesnt help. Any advice?
Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.
-
Shuts down and restarts without prompt - is my G5 haunted?
I got a new G5 about two months ago (woo hoo!) and LOVE IT.
But it started just shutting off on its own, without my prompt, like a ghost was in charge. It would start back up with no problem, and might go on with no problem, or it might immediately shut off again when I opened an application. It just turned off, like someone pulled the power plug. (I do have it on a surge protector, and no other devices on the strip powered off)
At first it seemed like it was ITunes that caused it, so I deleted the playlist, and then it got better...briefly. Sometimes I'd go a day with no problem, other times it would happen several times in a row.
I finally called support (still under the 90 day thing) and they had me reset the SMU button. That seemed to fix it for a couple of weeks, but now it's back. I eventually did the reset again, but it's still happening. Only now it shuts off, then about 15 seconds later it restarts on its own.
I was reading a thread here that said to check the system.log for a temp overheat, but there's nothing in the log like that. It seems to happen about 90 percent when I launch ITunes, and 10 percent just out of the blue. Not helpful when I'm working on something and haven't yet hit save.
And I have to confess that launching ITunes now causes me to cringe...
I'll call Apple Support today, but I'm just wondering if anyone else has had this problem, and what it might be. In all my years of Macs, I've never had a problem. I was just hoping the reset button would fix it, but it doesn't seem probable.
Power supply? Logic board? Casper the Ghost?
Julihi juli,
what g5 have you got. is it the new duel core models, if so the check the connections on the back of your hdd and the logic board. as these work loose very easily. what it sounds like as if the connection is just touching on the drive or logic board. i have the same problem with a s-ata drive, and the cable just slides off all the time. what seems to be happening is that when it disconnects the comp shuts down, and at the last second with the fans slowing the machine get a slight vibration just enough to connect again. and the comp must interpit the connection as a start-up. not sure about the start-up But possible. or it could be a kp, anyways check your connections.
john -
Problem running PSE 11 after system unexpected system shut down and restart
Computer lost power during photo upload in PSE 11 organizer. after restarting cannot open program. Tried reinstall of program still same issue. Help?
Hi,
You may have a corrupt catalog.
I would first try to repair and optimize your catalog.
Load the organizer while holding down the shift key - that should open the Catalog Manager.
Select you current catalog and click on the Repair button
When that has finished, click on the Optimize button
When that is done, click on the Cancel button to close the Catalog Manage
Which operating system are you running on?
Brian -
when i click to open firefox it says that "firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." and I've tried to shut down and restart my computer but it keeps showing the same message. I've even uninstalled Firefox and then reinstalled in the hopes that the problem would be solved but it this message is still popping up. What can I do to solve this problem?
== This happened ==
Just once or twice
== I was on facebook trying to upload pictures yesterday. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; InfoPath.1)Do you have a profile lock file in your profile folder? If so, delete it and see if TB runs properly:
http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file -
Since installing mountain lion system keeps shutting down and restarting
since i installed the latest operating system my iMac unexpectedly shuts down and restarts. this never happened prior to the install. anyone having similar problems?
here is the latest panic report
Tue Aug 27 18:54:07 2013
panic(cpu 0 caller 0xffffff80030530aa): "!pageList phys_addr"@/SourceCache/xnu/xnu-2050.24.15/iokit/Kernel/IOMemoryDescriptor.cpp: 1484
Backtrace (CPU 0), Frame : Return Address
0xffffff80eae63840 : 0xffffff8002c1d626
0xffffff80eae638b0 : 0xffffff80030530aa
0xffffff80eae63940 : 0xffffff8003053459
0xffffff80eae63a40 : 0xffffff800305270a
0xffffff80eae63a80 : 0xffffff7f83334b62
0xffffff80eae63ad0 : 0xffffff7f8333317c
0xffffff80eae63b20 : 0xffffff80030681f3
0xffffff80eae63b80 : 0xffffff800304907a
0xffffff80eae63be0 : 0xffffff7f83333ad2
0xffffff80eae63c20 : 0xffffff8003065e2f
0xffffff80eae63d70 : 0xffffff8002c98c01
0xffffff80eae63e80 : 0xffffff8002c20b3d
0xffffff80eae63eb0 : 0xffffff8002c10448
0xffffff80eae63f00 : 0xffffff8002c1961b
0xffffff80eae63f70 : 0xffffff8002ca6536
0xffffff80eae63fb0 : 0xffffff8002cce9e3
Kernel Extensions in backtrace:
com.apple.iokit.IOHIDFamily(1.8.1)[F0B6DA72-B1C1-3816-AC9F-5F1C12E8A7DD]@0xffff ff7f83332000->0xffffff7f8339efff
dependency: com.apple.driver.AppleKeyStore(28.21)[79B72EA6-5F8C-3D6D-B0B7-0D29D183039D]@0xf fffff7f83324000
BSD process name corresponding to current thread: WacomTabletDrive
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide: 0x0000000002a00000
Kernel text base: 0xffffff8002c00000
System model name: iMac9,1 (Mac-F2218EA9)
System uptime in nanoseconds: 12012871915464
last loaded kext at 12001672244392: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f84de2000, size 16384)
last unloaded kext at 5162425658972: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f84ddf000, size 12288)
loaded kexts:
com.wdc.driver.USB_64HP 1.0.0
com.apple.driver.AppleUSBCDC 4.1.23
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.1.4f2
com.apple.driver.AGPM 100.12.87
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.GeForce 8.1.2
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleIRController 320.15
com.apple.driver.Oxford_Semi 3.1.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleAHCIPort 2.5.2
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.IOBluetoothHIDDriver 4.1.4f2
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.4f2
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.nvidia.nv50hal 8.1.2
com.apple.NVDAResman 8.1.2
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBHIDKeyboard 170.2
com.apple.driver.AppleHIDKeyboard 170.2
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.1
com.apple.iokit.IOFireWireSBP2 4.2.2
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 530.4
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.6.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
System Profile:
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 8 GB, SMC 1.44f0
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDT721032SLA380, 320.07 GB
Serial ATA Device: OPTIARC DVD RW AD-5670S
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 4
USB Device: Keyboard Hub, apple_vendor_id, 0x1005, 0x24300000 / 3
USB Device: Apple Keyboard, apple_vendor_id, 0x021d, 0x24320000 / 5
USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1105, 0x24100000 / 2
USB Device: USB 2.0 Hub [MTT], 0x050d (Belkin Corporation), 0x0017, 0x26200000 / 2
USB Device: My Book 1148, 0x1058 (Western Digital Technologies, Inc.), 0x1148, 0x26210000 / 6
USB Device: Mass Storage Device, 0x058f (Alcor Micro, Corp.), 0x6362, 0x26270000 / 5
USB Device: USB2.0 Printer (Hi-speed), 0x04b8 (Seiko Epson Corp.), 0x0007, 0x26240000 / 4
USB Device: Eye-One display, 0x0971 (GretagMacbeth AG), 0x2003, 0x26230000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: DTK-2100, 0x056a (WACOM Co., Ltd.), 0x00cc, 0x06400000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 3
FireWire Device: FreeAgent FW, Seagate, 800mbit_speed -
Not sure if anyone else is experiencing the same issue of the screen freezing or suddenly enlarging. I'm having to shut down and restart as much as five or six times a day. This has been happening pretty regularly for the past week or more, but seems to be getting worse. Could it be the last software update?
Close all apps in Multi-Task Window.
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen -
Since installing OSX 10, my iMac randomly shuts down and restarts. I can not determine why this is happening. Any ideas?
1. This is a comment on what you should and should not do to protect yourself from malicious software ("malware") that circulates on the Internet. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
If you find this comment too long or too technical, read only sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandboxing security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you always stay within a safe harbor of computing practices. How do you know what is safe?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is unsafe.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are outside the safe harbor, though not all are necessarily harmful.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe. For instance, if a web page warns you that Flash is out of date, do not follow an offered link to an update. Go to the Adobe website to download it, if you need it at all.
Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
"FREE WI-FI !!!" networks in public places are unsafe unless you can verify that the network is not a trap (which you probably can't.) Even then, do not download any software or transmit any private information while connected to such a network, regardless of where it seems to come from or go to.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. Most of the real danger comes from highly targeted "zero-day" attacks that are not yet recognized.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
Anti-virus software may be able to tell you which particular trojan it is, but do you care? In practice, there's seldom a reason to use the software unless an institutional policy requires it.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither should you assume that you will always be safe from exploitation, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices. -
IMac (Oct 2009) keeps shutting down and restarting when not being used.
At least once a day, usually when not being used, I will see a dialog box that say computer had to restart due to a problem. data in problem report does not clearly state problem - many multi-page entries
Have reinstalled OS 10.8.2 once
this morning tried to restart with safe boot and had spinning beach ball for more than 15 minutes. shut down and restarted nin recovery mode. verified and repaired permissions (all seem to be related to Canon Pronter plug-ins- had an error message yesteday asking if I wanted to repair printer software and I said yes). Printer seems to be working. Had one statement that indicated a screensaver issue-see below
a while back, iTunes album art screensaver hung up with just two album covers flipping in all rows and columns.
after a few restarts, it started working correctly again..- yesterday I set screen saver to never, but still had a crash this morningHere's the latest panic report. BTW, I ran for a while from an external system boot - very sloww (thumbdrive), but nothing happened. However, when I retarted I tried to restart in Safe Mode and the launch never completed (30 minutes without start)
Tue Jan 1 07:15:40 2013
panic(cpu 0 caller 0xffffff8002443908): "zalloc: \"buf.8192\" (878 elements) retry fail 3, kfree_nop_count: 0"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:1826
Backtrace (CPU 0), Frame : Return Address
0xffffff800aafb2b0 : 0xffffff800241d626
0xffffff800aafb320 : 0xffffff8002443908
0xffffff800aafb400 : 0xffffff80024de8d8
0xffffff800aafb450 : 0xffffff80024de395
0xffffff800aafb500 : 0xffffff80024dd64b
0xffffff800aafb530 : 0xffffff80024dd7f7
0xffffff800aafb550 : 0xffffff80026e7766
0xffffff800aafb5c0 : 0xffffff800272024c
0xffffff800aafb5e0 : 0xffffff8002721314
0xffffff800aafb680 : 0xffffff800271d2a0
0xffffff800aafb790 : 0xffffff800271959c
0xffffff800aafb840 : 0xffffff800271936a
0xffffff800aafb8c0 : 0xffffff80025137df
0xffffff800aafb910 : 0xffffff8002509fe1
0xffffff800aafb950 : 0xffffff800252685c
0xffffff800aafba00 : 0xffffff8002526679
0xffffff800aafba30 : 0xffffff8002712518
0xffffff800aafbaa0 : 0xffffff8002511c46
0xffffff800aafbae0 : 0xffffff800250936c
0xffffff800aafbb90 : 0xffffff80024fbb49
0xffffff800aafbc40 : 0xffffff80024fc314
0xffffff800aafbf50 : 0xffffff80027e182a
0xffffff800aafbfb0 : 0xffffff80024ced33
BSD process name corresponding to current thread: mdworker
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel slide: 0x0000000002200000
Kernel text base: 0xffffff8002400000
System model name: iMac10,1 (Mac-F2268DC8)
System uptime in nanoseconds: 39390380895329
vm objects:17562048
vm object hash entri:2264400
VM map entries:6216720
pv_list:19034112
vm pages:74043792
kalloc.32:1826816
kalloc.64:170766336
kalloc.128:649785344
kalloc.256:648183808
kalloc.512:2285568
kalloc.1024:2637824
kalloc.4096:2387968
kalloc.8192:3989504
ipc ports:2168672
threads:1166880
vnodes:16507128
namecache:6952320
HFS node:21840864
HFS fork:6352896
decmpfs_cnode:2244312
buf.8192:7192576
ubc_info zone:3559464
vnode pager structur:1978800
Kernel Stacks:1982464
PageTables:44011520
Kalloc.Large:12347186
Backtrace suspected of leaking: (outstanding bytes: 236544)
0xffffff80024435b9
0xffffff80024245ed
0xffffff80027ee1bd
0xffffff80028507f7
0xffffff800285075b
0xffffff7f82b6b1ac
0xffffff7f82b72922
0xffffff7f82ab138b
0xffffff7f82ab49b0
0xffffff7f829f843c
0xffffff800243dcde
Kernel Extensions in backtrace:
com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000->0xffffff7f82a1cfff
com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000->0xffffff7f82ac3fff
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
com.seagate.driver.PowSecDriverCore(5.2.2)[F1208D07-4D35-0191-3638-3D7CA8C9D5CF ]@0xffffff7f82b69000->0xffffff7f82ba1fff
dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f82a4c000
dependency: com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000
dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
dependency: com.apple.iokit.IOFireWireSBP2(4.2.0)[2B060BAD-9A9B-3A52-A742-A37CDFC59570]@0xf fffff7f82b4b000
last loaded kext at 1223700924328: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f84440000, size 16384)
last unloaded kext at 1481342745694: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f84440000, size 12288)
loaded kexts:
com.pogoplug.filesystems.ppfs 2010.10.7
com.seagate.driver.PowSecLeafDriver_10_5 5.2.2
com.seagate.driver.PowSecDriverCore 5.2.2
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.filesystems.autofs 3.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.ATIRadeonX2000 8.0.0
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleUSBAudio 2.9.0f6
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.kext.AMD4600Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
I have to shut down and restart JDeveloper to see changes. Why?
I have to shut down and restart JDEV about 30 times per day. If I make changes to the style sheet, I can't refresh my deployed page, I can even redeploy it. I need to physically shut down JDEV and restart it.
This happens as well with multiple style changes I am making, regardless of whether it' inline style changes (setting the height of an image) or changing a border.
Am I missing something?
JDEV 11.1.1.3In your web.xml file you would have an entry like:
<context-param>
<description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
<param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
<param-value>false</param-value>
</context-param>
Set the parameter value to true. Restart the server .. after this for any css changes we will not need to restart the Jdev.
Amit -
My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Logger Service keeps shutting down and restarting
Hello,
I have upgraded my lab UCCE call center to v9.0
I have a simplexed environment
Ever since, the logger service keeps shutting down and restarting.
Recently, the node manager issued an error message and shut down the server
I tried to check some logs but I point out the problem, there are errors in different processes.
Attached are the logs.Hi,
if the NM tries to reload the server, it indicates a Problem (capital inteded).
Indeed, there's something interesting going on:
08:29:11:822 la-rpl Trace: Starting Recovery Key for Admin table is 6717118506000.0
08:29:11:822 la-rpl Trace: The largestkey = 7201232308043.0 >= startkey = 6717118506000.0
08:29:11:823 la-rpl Trace: To correct this problem: Stop logger service. Use ICMDBA tool to sync configuration data from its partner logger database. Restart logger service.
08:29:11:823 la-rpl Fail: Assertion failed: largestkey < startkey. File: ICRDB.CPP. Line 742
08:29:11:860 la-rpl Trace: CExceptionHandlerEx::GenerateMiniDump -- A Mini Dump File is available at logfiles\replication.exe_20130523082911824.mdmp
08:29:12:074 la-rpl Unhandled Exception: Exception code: 80000003 BREAKPOINTFault address: 754A3219 01:00012219 C:\Windows\syswow64\KERNELBASE.dllRegisters:EAX:00000000EBX:00000000ECX:00001890EDX:E1043F00ESI:015F8AB0EDI:00000005CS:EIP:0023:754A3219SS:ESP:002B:003CE2D8 EBP:003CE2E0DS:002B ES:002B FS:0053 GS:002BFlags:00000246Call stack:Address Frame754A3219 003CE2E0 DebugBreak+26EB1459C 003CE2EC EMSAbortProcess+C6EB1ACD1 003CF7F8 EMSReportCommon+1A16EB1ADBB 003CF818 EMSFailMessage+2B013BBE5A 003CF8A8 ICRDb::ICRDb+44A013B2FE2 003CF9B8 main+582015D96C2 003CF9FC NtCurrentTeb+174767333AA 003CFA08 BaseThreadInitThunk+1277449EF2 003CFA48 RtlInitializeExceptionChain+6377449EC5 003CFA60 RtlInitializeExceptionChain+36
The short version: configuration data is corrupt.
The longer version: the above message in red informs about the result of a sanity check. Each configuration change creates a new row in one of the tables holding the config info, and each row contains a RecoveryKey which is usually a large number incremented by the insertion. The error message says the largest key (= last key) contains a value that is lower than the first key. Naturally, this is something to consider for a lonely philosopher, but the rigid world of Cisco ICM does not allow metaphysical phenomena. Lower numbers are supposed to be lower than higher numbers.
This, of course, raises an exception and the Logger service restarts. If there are too many restarts, the Node Manager kicks in and restarts the machine - this is just a mechanism that prevents a larger extent of data corruption.
Now, if there's an other side Logger - fine, as the error message suggests, you can initiate manual replication (provided the other Logger database contains valid information).
Unfortunately, as you have written, this is a side A only environment. This may mean:
- accepting the situation, stopping ICM, throwing out the logger database, recreating it and reinstalling the Logger service,
- poking around in various tables to check what may be saved - this may mean the beginning of an adventure.
G. -
Computer shut down and restart
My HP Pavilion dv4 shuts down and restarts whenever it wants to. The first warning is that my cd drive will engage then my screen goes black and white writing appears that says "A problem has been detected with your computer. Windows has shut down to prevent damage to your ......" This is all I can read before it shuts down. Even when the computer is in sleep mode this happens. Help please.
Hi @dis_computer ,
Welcome to the HP Forums! I hope you have a great experience with us.
I see that you are computer appears to be randomly shutting down. Without that error message it will be hard to determine the exact cause. If you can get that message that would be great. Even if you video the crash and then pause it when the error comes up.
We can try testing the hardware to see if that is causing the issue. Use the UEFI tools mentioned in this HP document Testing for Hardware Failures, run the System Test – Extensive Test to check all the major hardware components.
Do you notice if the computer is hot when it crashes. If so try cleaning the fan as mentioned in this HP link Reducing Heat Inside the PC to Prevent Overheating.
Also, can I get your product number so I know what we are working with.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
often for no apparent reason the computer crashes and nobody available to any command (keyboard or mouse), the images disappear. I am forced to shut down and restart the computer.
open console in Applications>Utilities, check the system log for the date/time of the last problem for clues.
-
When I try to download xcode 4.6.2, my computer shuts down and restarts telling me I have an error. HELP?!?? Can anyone help me?
Wed Jun 12 21:40:11 2013
panic(cpu 6 caller 0xffffff80190ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 6), Frame : Return Address
0xffffff81096e3a80 : 0xffffff801901d626
0xffffff81096e3af0 : 0xffffff80190ac90b
0xffffff81096e3b10 : 0xffffff801911c09c
0xffffff81096e3d40 : 0xffffff8019110e92
0xffffff81096e3d70 : 0xffffff80190ff954
0xffffff81096e3ef0 : 0xffffff80190ffa10
0xffffff81096e3f50 : 0xffffff80193e182a
0xffffff81096e3fb0 : 0xffffff80190ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID:
Kernel slide: 0x0000000018e00000
Kernel text base: 0xffffff8019000000
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 11938612497736
last loaded kext at 606795969288: com.line6.driver.xtaudio 7.2.3 (addr 0xffffff7f9b360000, size 1024000)
last unloaded kext at 207361764339: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f99ac8000, size 65536)
loaded kexts:
com.line6.driver.xtaudio 7.2.3
net.telestream.driver.TelestreamAudio 1.1.0
com.logmein.driver.LogMeInSoundDriver 1.0.2
at.obdev.nke.LittleSnitch 3876
com.seagate.driver.SeagateGoFlexBlockSizeAdjuster 5.2.2
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 86.0.3
com.apple.driver.AppleUSBAudio 2.9.0f6
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.kext.AMD5000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Maybe you are looking for
-
After I Downloaded IOS 7 when I play my music on my car stereo it no longer displays the artist name and track. Is there a fix for this issue?
-
Firefox fills complete screen - no close box - can't shut down, etc. Makes it worthless
Opening firefox, takes me to default program Yahoo which opens to total full screen thus not showing any tool bars, no URL address field, and nothing at the bottom of screen either. Cant' even shut down properly. Downloaded the latest version and not
-
MySQL 5.1 Stored Procs and Views not showing, only tables.
Hi, I'm having problems getting stored procedures and views to show up in the Data Source Explorer of CR4E 2.0. I've checked the properties of the connection and the Default Stored Procedure Filter is disabled, so things should show Tables are showin
-
Unable to Open the Word Document
Hi Experts, I have a scenario to generate word document with the information comming from R/3 into bookmarks located in the document. This we are doing with WordML. We have uploaded WordML templates to server and at the run time we are getting the co
-
Bex query is getting hanged, when trying to drill down only for one hierarchy node.
Hi All, We have a bex query, in which we have multiple nodes. And we are able to expand almost all nodes except one hierarchy node called "BD1". when we trying expand the BD1 node, the report is executing on and on and getting hanged up. In RSRT the