System shuts down while burning project

While burning a DVD project the system shuts down randomly. I started burning a project and everything went fine until it started actually writing to the DVD. I walked away from the system for a minute and when I came back it was off. When I restarted it the DVD was unusable.
I thought it may have had something to do with the energy saver features, so I turned off anything that would put the hard drive or display to sleep. I even surfed the Net during one burn to make sure the system remained active, but it shut off anyway.
I ruined 3 DVDs so far. Any thoughts?

Do you get any output from iDVD in the console log when this happens?

Similar Messages

Premiere Pro CS4 crashes and system shuts down while rendering

Hi All,
Good morning everyone, my system shuts down while rendering using Adobe media encoder from premiere pro. I have tried the following:
1.Completely removing CS4 and reinstalling.
2. Updating all the video drivers.
3. Re installing the Operating System (XP and Vista)
But the issue persists, i have attached the crash report and any thoughts are highly appreciated.
Regards,
Vincent

A number of problems pop out of your DXDIAG:
Both your video driver and your audio driver are more than 3 years old.
Your F drive is slow, because of the fill rate of 90%. You lack other hard disks.
You have Matrox, BlackMagic, Nero, Sony, DivX and other stuff installed. It has been a long time ago that I have seen such a long list of DirectShow filters installed.
Suggestions: Update your drivers, clean up your F drive and add another disk, remove all that Matrox stuff, possibly include BlackMagic and Sony.
What export/encoding settings do you use from what sequence settings?

Shutting down while burning

I am using Nero to burn DVD's. In the last 3 months my burner has been acting weird. I start a burn of a DVD and within 5 minutes or so the computer just turns itself off. I have tried different types of videos and nothing works.

George Peters wrote:
Temperature or hardware Monitor only reports the temperatures not the fans speeds.
Bresink's HardwareMonitor reports fan speeds, voltages, and a few other things
(depending on what sensors are available in your particular Mac's hardware).
TemperatureMonitor is the freeware version that only reports temperatures.
Neither one reports Power Supply temperature on my white 20" -- so, I assume
it has no power supply temp sensor. They both reported Power Supply temps on
my ALU ex-iMacs.
Looby

Help My Fla file corrupted while saving (System shut down while saving)

Hi everyone does anyone have any solution for this. I am using Adobe CS5 my week longs work of animation is all gone. I checked the forum for solutions and i found so many like updating my CS5 Software e.tc. I finally found one where they said u can convert ur fla file to a zip file. and check the library assets to see which one is corrupted but the problem is that i could find only one symbol in the libary folder where as i had about five symbols in the fla file. Pls I really need your help. The size before it was corrupt was well above 24mb but now all i can see is 13MB i really really hope i can resucue this file as i dont have any backups.

backups are always smart. use a naming convention that's convenient for you.
i use projectname_01.fla, projectname_02.fla etc. whenever you save, use a new name. it's not unusual for me to end-up with projectname_49.fla.
if you like tidy directories without lots of files, you can move older flas to and "old" or "previous_versions" subdirectory.

Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9

Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?

Potential Args, Computer shutting down while playing a game

I've only had this mac for 5 months, but it keeps shutting down while I'm playing StarCraft II. It should be able to handle the game, but it keeps telling me to restart and I have no idea what the error says or means. I'm not sure what (4 potential args on stack) means. I'm not sure if it is a frame rate issue and how to fix it or change the frame rate if needed. Any help would be much appreciated. The error is below:
Interval Since Last Panic Report: 145971 sec
Panics Since Last Report: 2
Anonymous UUID: 1017C80F-D5F3-488B-91B6-01EB174E0122
Mon Apr 11 21:51:18 2011
panic(cpu 2 caller 0x2aab59): Kernel trap at 0x0097efb5, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x0000003c, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x5724a710
CR2: 0x0000003c, EBP: 0x5724a658, ESI: 0x5724a710, EDI: 0x00000000
EFL: 0x00010202, EIP: 0x0097efb5, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x5724a448 : 0x21b510 (0x5d9514 0x5724a47c 0x223978 0x0)
0x5724a498 : 0x2aab59 (0x59aeec 0x97efb5 0xe 0x59b0b6)
0x5724a578 : 0x2a09b8 (0x5724a590 0x0 0x5724a658 0x97efb5)
0x5724a588 : 0x97efb5 (0xe 0x48 0x10 0x10)
0x5724a658 : 0x98180d (0xaed6000 0x0 0x0 0x2)
0x5724a998 : 0x9825bd (0xaed6000 0x50d79590 0x7d0 0x2a9268)
0x5724a9b8 : 0x985c8c (0xaed6000 0x50d79590 0x19 0x99e9b3)
0x5724a9f8 : 0x985f04 (0xaed6000 0xaed6114 0xaed62c4 0x0)
0x5724aa58 : 0x9549fb (0xaed6000 0x141f3c00 0x8ffa86f9 0xc1)
0x5724ab08 : 0x951533 (0xaed6000 0x0 0x5724ab6c 0x5724ab68)
0x5724ab88 : 0x56a738 (0xaed6000 0x0 0x5724addc 0x5724ac14)
0x5724abd8 : 0x56afd7 (0xa4b880 0xaed6000 0x889bf88 0x1)
0x5724ac28 : 0x56b88b (0xaed6000 0x10 0x5724ac70 0x0)
0x5724ad48 : 0x285be0 (0xaed6000 0x10 0x889bf88 0x1)
0x5724bdf8 : 0x21d8be (0x889bf60 0xaedf5a0 0x20ca0 0x4807)
0x5724be38 : 0x210a3e (0x889bf00 0x0 0x9f91bd0 0x9f921f0)
0x5724be98 : 0x216ca1 (0x889bf00 0x0 0x0 0x0)
0x5724bf18 : 0x294e25 (0x5724bf44 0x0 0x0 0x0)
0x5724bfc8 : 0x2a1028 (0x9b91280 0x0 0x10 0x9b93d40)
Kernel Extensions in backtrace (with dependencies):
com.apple.ATIRadeonX3000(6.2.6)@0x948000->0xb54fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x908000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x93b000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x919000
BSD process name corresponding to current thread: SC2
Mac OS version:
10J869
Kernel version:
Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 1303791505121
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x1148000, size 0x65536) - last unloaded 128377333974
loaded kexts:
com.razer.naga.driver 2.0.0
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleUpstreamUserClient 3.5.4
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleHDA 1.9.9f12
com.apple.kext.ATIFramebuffer 6.2.6
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.54
com.apple.ATIRadeonX3000 6.2.6
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AirPort.Atheros21 424.14.5
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleBacklight 170.0.34
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleUSBEHCI 4.1.8
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleBluetoothHIDKeyboard 141 - last loaded 37170530879
com.apple.driver.IOBluetoothHIDDriver 2.4.0f1
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.kext.ATI5000Controller 6.2.6
com.apple.kext.ATISupport 6.2.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.IO80211Family 314.1.1
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.0f1
com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
com.apple.iokit.IOBluetoothFamily 2.4.0f1
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMergeNub 4.1.8
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOUSBFamily 4.1.8
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: iMac11,3, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 4 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: SAMSUNG HD103SJ, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: Razer Naga, 0x1532, 0x0015, 0xfd130000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd110000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa120000

You are only just beginning to feel the pain of Starcraft II on your Mac. Have you seen this List of problems?
Blizzard created the junk, and it's up to them to properly patch it. The list of other well known and respected programs it's incompatible with (LittleSnitch, AppCleaner, FileVault, and PeerGuardian to name a few) doesn't give me a warm and fuzzy.
The page also mentions that your CPU can overheat, for whatever reason, and that means total failure for a laptop or early component damage to a motherboard. Gee, that sounds like something that shouldn't be run on a regular basis.

Mac book pro trys to shut down while downloading?

my mac book pro trys to shut down while im downloading for some reason..

Hi Monroeeugene,
I'm not sure if you mean shutting down or going to sleep ... but this article will explain how to change your sleep settings so your downloads don't get interrupted.
Mac Basics: Set your preferences
http://support.apple.com/kb/ht2490
Change your Mac's sleep settings
To conserve energy, all Macs have the ability to sleep. When you haven't used your Mac for a set amount of time, it enters a low-power mode until you wake it by pressing the keyboard, trackpad, or moving the mouse. Sleep doesn't turn off your computer; it merely puts it into an inactive state that consumes less power.
Open System Preferences
Choose View > Energy Saver.
Choose the Power Adapter or Battery tab. If you're using a desktop Mac (a Mac mini, iMac, or Mac Pro), the Power Adapter and Battery tabs do not appear.
Move the sliders for both the computer and display to change the times in which they go to sleep.
Select any other options you want, such as sleep and wake.
Hope this helps ...
- Judy

I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it. What could this come from? Is there a simple solutions to this problem?

I have an iMac that I purchased back in 2010 and over the past 9 month or less my computer just started shutting down while someone was in the process or working on it. What could this come from? Is there a simple solutions to this problem?

Which model iMac do you have? http://support.apple.com/kb/HT1758 How to identify iMac models
Which OS is currently installed?
Check out KB Articles: http://support.apple.com/kb/HT3964 Intel-based Macs: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM
If not of the above works and you have AC, call them. Let them deal w/it. Otherwise, take your iMac down to your local AS or an AASP. Diagnostic testing is FREE!
You can also research for a solution on YouTube's "How To" website and iFixit.

IMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath.

I've got an iMac from 2009, 4 GB RAM. System shuts down when I use safari or make much moves on the trackpath. Use Mavericks, installed Mavericks again on clean system. Problem still exist. What now?

The 2009 iMaccan take 8 GB ram, while it should run ok with 4 it might be a rather inexpensive test to put in 8 and see if that clears up the problems. Mavericks is going to use almost 2 GB itself so, unless you are opening a lot of applications, you should get by with 4 GB. But I would go for 8 and see how it does.

IMac G5 Shuts down while running applications

I installed iLife '06.
Since then my iMac G5 (20") has started shutting down while I'm working.
I'm not sure if the installation is related to the intermittent shut down or if there is another problem.
Someone told me that the fan might be bad. I don't know how to check if the fan is bad. I've heard that some iMac's have noisy fans. I've never heard the fans on my iMac.
I've had my iMac for ten months with no problems.
iMac G5 Mac OS X (10.4.6)

There are two common reasons for an iMac G5 to shut-down:
1) a failing power supply (see the article A. Brody mentioned).
2) Over-heating.
I'll tackle the second one.
All the recent Macs have a protection mechanism built-in. If the system gets beyond a given temperature, the computer will turn itself off (without warning) to prevent permanent damage.
So, if you notice that the computer is running warm before it shuts-off, then that could be the cause.
But, it is also very likely to be the power supply.
And, operating with a faulty power supply could lead to tons of other problems or damage.
So, I would personally get it into a shop for inspection and repair very fast.
But, if it is under warranty, you should not have any trouble at all getting it fixed (either standard warranty or AppleCare).
If it's warranty has expired, see if it is within the covered systems listed in the article A. Brody gave you.
If so, request it to be inspected and repaired for free under terms of that extension.
Regardless of which problem it is, get it fixed. Neither problem is one that should be ignored.
Hope this helps.

System shuts down immediately upon build

My whole computer shuts down immediately upon trying to build a project. It only happens with one project. I can build other projects just fine. I was able to build this project just fine 5 months ago. I deleted the build folder to save space, but have made no other changes since then, other than transferring the project folder to another hard drive. Now every time I try to build the whole computer immediately shuts down.
My first thought, is somehow an asset went bad, but I have no idea how that could have happened because every thing worked fine five months ago. I can't even determine what causes the crash from the log because it happens immediately. I have tried transferring the project folder to other hard drives, but the same thing occurs. My biggest question is even with a corrupt asset why would the entire system shut down. I would think I would just receive an error message.
Thoughts on correcting the problem or any information as to what could cause the whole system to shut down would be appreciated. Thank you.

Jurgen,
Thanks for your reply. You are right, the key was in that file. (Volker also pointed me in that direction). For some reason it had a name for my server that was not in my CFTGCP #10.
WARNING => DpNetCheck: NiHostToAddr(PTC02.PTC) failed (rc=-2)
I do not know where it got that address from. It is close to the correct address but because it was not exactly correct the network access failed. Once I made the change the jobs stayed up.
On to to the next problem....
Alan

My imac suddenly shuts down while on line.

My imac suddenly shuts down while on line. It has to be unpluged for a couple of hours before it will restart. Could it be the battery dying? Any other sugestions?

Which iMac..? Go to > How to identify iMac models
1. Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
2. Reset the PRAM and NVRAM > Resetting your Mac's PRAM and NVRAM
Then test it for a time and report back.
You also might want to give the Extended Apple Hardware Test a run, as per > Intel-based Macs: Using Apple Hardware Test to see if it turns up a hardware problem.

EMac shuts down while on-line

I'm visiting relatives in Ukraine, and they have an odd problem with their eMac that I've been trying to fix. The eMac will, suddenly, with no warning, shut down while on-line. First, the windows and toolbars all disappear, leaving only the desktop photo. Then, seconds later, that disappears, too, and the computer shuts off.
This seems to happen only while using Gmail or Yahoo mail; earthlink web mail hasn't triggered it. (And I haven't tried any other web mail sites.)
Any suggestions?
SO far I have:
repaired disk permissions
verified the disk
run the Apple hardware test
upgraded to 10.4.10
installed iLife '08
installed and tried Firefox
Thanks.

Good idea, trying the test user! That the test user ran OK helps narrow done the troubleshooting steps, although it still leaves a lot of open questions.
The flashing question mark followed by eventual starting indicates that the startup disk PRAM setting is lost or corrupted. Open System Preferences -> Startup Disk and reset the startup volume to be the hard drive's OS X volume.
The missing hard drive in Disk Utility sounds bad, but if the hard drive were corrupted, it shouldn't be starting up and your test user account shouldn't be running. If you're braver than I am, you can try remotely talking your family through using the Unix file system check utility as described in Using Disk Utility and fsck.
That the test user you created had no problems would seem point to either a conflicting third-party add-on, or a damaged hard drive that's being triggered when Spotlight runs in the background. The latter is unlikely since your test account ran OK. Have your family try Starting Up in Safe Mode. If the Mac is stable in Safe Mode, that leaves the process of determining what third-party add-on is causing the problem (talking someone through that sort of process remotely gives one a whole different perspective on the life of call center tech support staff).
The basic idea is to move items out of the /Library/StartupItems and /Library/PreferencePanes folders and into a holding folder, retarting the computer, and seeing if the Mac is stable or not. After a particular item is identified as a likely culprit, it can either be deleted or, if the particualr function is really needed, the publisher's website checked for updates.
Good luck!

Mac Mini shutting down while asleep.

I have frequent problems with my Mac Mini shutting down while asleep. Resetting the SMC doesn't seem to help. SMC firmware is the latest version. Hardware details are:
Model Name:          Mac mini
Model Identifier:          Macmini6,2
Processor Name:          Intel Core i7
Processor Speed:          2.3 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          8 GB
Boot ROM Version:          MM61.0106.B03
SMC Version (system):          2.8f1
OS X 10.9.1

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.

Premiere Elements 11 shut down while starting; without error message

hello everybody,
pe11 worked well at my Laptop.
Since a week it always shut down while starting it.
No error message!
I already reinstalled it, tried to start with admin rights, but it doesn't work.
Thanks for your answers!
Win 7 64bit

Matze S
Premiere Elements 11 on Windows 7 64 bit.
Before a week ago, how long had you been working with Premiere Elements 11 on Windows 7 64 bit without problems?
Does the problem exist with and without the antivirus and firewall(s) disabled?
Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
Do you have the latest version of QuickTime installed on that computer with Premiere Elements 11?
Any new programs, 3rd party plug-ins and codecs, installed?
Where are the Scratch Disks directed and how much free space is at those designated locations? Any pile ups
of preview files in the Adobe Premiere Elements Preview Files Folder or conformed audio files in the Media Cache
Files Folder.
Let us get the classic deletion of the Adobe Premiere Elements Prefs file out of the way.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
11.0
and in the 11.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 11.0 Folder
in which it exists. Be sure to be working with Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
Depending on how things are going, you might also include right clicking the desktop icon for the program, selecting and applying Run As
Administrator.
Let us work through the above and then, based on your results, we can decide what next if necessary.
Thank you.
ATR

System shuts down while burning project

Similar Messages

Maybe you are looking for