System Shuts Down with no Error in Log

My System will randomly shut down, especially if I am ripping a CD. I am not sure if it is heat as the machine stays pretty cool.
Though since I put in my Old Video Card I keep getting a System Beep during POST (1 long, 3 Short)
According to the Forums that should be a conventianal Memory error, but everything seems to work fine and I dont always get the beeps. I have reseated the RAM and this machine has not had any issues since I built over 18 months ago.
Any thoughts? Could the Memory do this? I was under the impression that Memory Error caused a BSOD not shut down the system, where Heat or Power would cause that?
Any help would be appreciated

Quote from: Drokare on 04-March-05, 02:18:39
Sorry about the temperature thing At the moment I have PCAlert 4 on the system and it shows 56-57 C. Is there a program out there that I can monitor the Temperature (Performance Log) and even the power at given times?
Speedfan
Cheers

Similar Messages

I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??

Hello, I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??
Also does anyone know how to take something from one picture and add it to another in aperature?
Thank you!!!

I had the exact same problem. Here is what an Apple Support person told me to do - and it worked like a charm!
Go to your APPLICATIONS Folder. Find a folder within that folder called TOOLBARS. Remove the ENTIRE folder. Once you remove that folder, your Aperture should work perfectly.
There is something in that folder that you don't need that messes with Aperture. Try it. Mine worked perfectly!

My computer shuts down with no error messege when i try to burn an audio cd

please help me my computer shuts down with no error message. If it helps i am using windows XP.

Put a standard audio CD in your drive and take a look at what is listed by Windows Explorer. You should notice something familiar. Take the CD that iTunes created and put it in a standard CD player. Does it work?
tt2

Why does most of CS6 shut down with an error message?

I bought CS6 last week and loaded it on to my computer. When I went to use it yesterday the majority of the programs didnt work. Photoshop is opening but illustrator and indesign dont. When I open indesign it opens, gets to the bit where you choose to open a previous document or start a new one then just shuts down and an error message pops up saying indesign had to close suddenly. Im in so deep over my head with all of this. Also im on a mac computer. if that helps. Does anyone have anything that can help me?

You need to be much more specific. What Mac? What version of OSX? Where are your files stored? This could be anything from permissions issues to severe configuration issues somewhere....
Mylenium

ICM7.5 - System is shutting down with a error message

Hi,
I have installed a ICM7.5 SPRAWLER in our Lab.All was working fine until yesterday, when I suddenly started receiving the below error
This system is shutting down. Please save all work in progress and log off.
Any unsaved changes will be lost.
This shutdown was initiated by LOGGERA-9a48f5 services..
Cisco systems. Inc, ICM Node Manager Manager shuting down system. To Cancel shutdown, run the stopshut utility
and the system shutsdown. I have not done any changes to the system.
Do you have any ideas what kind of an error is this and how to resolve this?
Please advise.
Thanks,
Srinivas

You need to check the log files - the .ems files - in the logger directory (maybe la\logfiles). You must use dumplog to examine these.
First look at the nm (Node Manager) log file to see why it is having trouble and which of the processes has errors and cannot be restarted. Then check the offending process. Maybe increase the trace to see your problem.
Maybe the configlogger cannot talk to SQL or something. I think you will see what the problem is quite easily. Maybe you will know how to fix it, but if not, come back here with some trace and ask again.
Regards,
Geoff

Satellite P505 S8950 laptop shutting down with bluescreen error message

Hi ,
I bought Toshiba Satellite P505-S8950 model 4 months ago.
I notice my laptop shuts down intermitently while straming videos especiaaly in 'full screen' mode and while using skype with video chat.
My laptop is still under warranty and I have not created any back up since I bought.Now,
Because system is unstable so doing back up now may not be useful.
After every restart I have meesage 'computer has recovered from unexpected shutdown' and upon allowing Windows to find solution nothing comes up.
copy +paste of one of error log-
***Problem signature:***
***Problem Event Name: BlueScreen***
***OS Version: 6.1.7600.2.0.0.768.3***
***Locale ID: 3081***
***Additional information about the problem:***
***BCCode: 109***
***BCP1: A3A039D8965D960F***
***BCP2: B3B7465EE8DA6805***
***BCP3: FFFFF80002C9595C***
***BCP4: 0000000000000001***
***OS Version: 6_1_7600***
***Service Pack: 0_0** *Product: 768_1**
I am running windows 7 home edition premium with 64 bit and RAM test after every restart is good so far.
Please can anybody help to the system stable and help my experience while browsing more enjoyable?
Thanks.

I have European Satellite P500 almost 2 months now and use it with original preinstalled Win7 home premium 64bit. I use it daily for work and some multimedia activities. I also use Skype almost daily.
Until now I didnt notice any similar problem.
It is not easy to discuss about such problems because none of us know how you have configured preinstalled OS, which applications do you use and if there is some software conflict that can be responsible for this.
Have you installed something that can be responsible for this behaviour?
To be honest I cannot imagine you have had this problem from the first day. Maybe you should install recovery image again using HDD recovery option.
I dont know what kind of back-up do you mean but what you can do is to start recovery DVD creation.

My iTunes shuts down with an Error a lot

When playing from my library iTunes quits every few songs, i noticed it only happens when the old song is playing and u want to turn on something else.
Right now I have to press pause and then play another song, otherwise 1 out of 5 times it will quit the program with an "unexpected error"
This is a brand new MacBook and i just started using iTunes (first time) ...so its not that i messed with any system files (or even settings for that matter)
iTunes for a Mac by the way

Hello and thank you so much for responding,
My iTunes is version 7.0 and Quicktime is version 7.1.3
This is the original account that was set up when I first turned on the computer. There are no other accounts. I noticed the problem right away when I first opened iTunes and started transfering my mp3 library.
Actually now it shuts down all the time! Sometimes in the middle of the song, sometimes when I press pause, sometimes when one song ends and it starts the other one.
I truly makes using iTunes impossible! not to mention the irony that my Windows iTunes was so much more stable ;(
Please help me out.

A book I created in iphoto keeps making the program shut down with an error message...

I created a photo book on my iphoto but have not purchased yet. Now when I open iPhoto and click on the book under 'keepsakes' the program shuts down and says iphoto quit unexpectedly. I have been unable to open the book since I created it. The other book that I have made before opens but for some reason, the program will immediately shut down after I click on it.

It could be that the database entries for that particular book are corrupted. Apply the fix below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
iPhoto 8 (09) and earlier- run the options indicated
iPhoto 9 (11) and later- run Option #4 to rebuild the database
OT

When I go to capture, FCE shuts down with no error message

I upgraded to FCE on both my Macs. One Mac powerbook G4 works fine in capture and writing to video. The other powerbook will shut the program down unexpectedly without error message. I use the same camera for both computers. Can someone help me figure this out.
Thanks!

Try these:-
1. Trash the preferences like this - http://www.fcpbook.com/Misc1.html
2. If that doesn't work, COMPLETELY UNINSTALL FCE like this and try reinstalling again -
http://docs.info.apple.com/article.html?artnum=301182
You can ignore the LiveType and Soundtrack items.
Ian.

My SignalExpress launches then shuts down with an error

I have not used the labview in a while and now when I boot my computer I get an nidevmon.exe application failed to initialize properly. Then when I launch signalviewexpress it starts then fails with an error
"COULD NOT START THE APPLICATION PLEASE CONTACT NATIONAL INSTRUMENTS"

Hi A&A_B,
There are several possible reasons for the nidevmon.exe
error. I first suggest trying some of
the solutions outlined in the KnowledgeBase article: Application Error nidevmon.exe in Traditional
DAQ or DAQmx
If you end up at step G (uninstalling the drivers), I would
recommend using the MSIBlast utility when uninstalling. This will clear any remaining driver
installation files from your PC. Keep
me posted on your progress.
Best Regards
Hani R.
Applications Engineer
National Instruments
Attachments:
msiBlast.zip ‏110 KB

Acrobat shuts down with an error every time I access Password security settings

Hi
I wonder if anyone can help me.
I have just bought Acrobat 8.1.2 professional, which I am using on a Windows XP machine.
When I enter the Password Security-Settings dialogue, about 2 seconds later, I get an error message saying that "Acrobat has encountered a problem and needs to close". When I click on "Send" or "Don't send", it then closes.
So I can't password protect my documents.
I experience this with a number of documents (including very, very simple ones), including pdfs I did not create.
I have run "repair" and also completely uninstalled and then reinstalled Acrobat,without success.
Has enyone else experienced this and found a solution?
Many thanks
Helena

I have now found a workaround for this! If you set the security settings you want as a security policy, and then apply that policy to your document (rather than trying to set the settings for the indoividual document), it all works fine without crashing.
It will mean that if you create lots of documents, all of which have slightly different security settings, you'll have a long list of policies, but I tend to use only about 2 security set ups, so it's fine for me. Hope it works for you too, L Haen.
Helena

My emac safari launches with no search screen and when i open a new tab it shuts down wit an error message???

Hi, and thanks in advance. I have an emac thats working fine except for safari. Click safari the top bar comes up but no page and when i open a new tab it shuts down with a error and message saying it unexpectedly quit and send to apple or relaunch.

safari that i am running is 4.3.1

Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre9

Recently I tried adding disc menu to my project and an error occurs and system shuts down using pre elements 9 on mac how can this be repaired

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 9 with the 9.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Have you viewed the tutorial links at http://forums.adobe.com/thread/1275830 page?
•Which version of Quicktime do you have installed?

My itunes keeps shutting down with an windows error

My itunes keeps shutting down with a windows error everytime i try to convert someting to AAC.

Im having the same issue. It starts up shutsdown and pops up an error has occured message. I have uninstalled and reinstalled it 3 times and even downloaded the Quicktime and ITunes seperately. But the same message appears everytime. I did discover that it was the Quick time messing up though... so uh this might not help but maybe someone else know something about the Quicktime problem.

System shuts down immediately upon build

My whole computer shuts down immediately upon trying to build a project. It only happens with one project. I can build other projects just fine. I was able to build this project just fine 5 months ago. I deleted the build folder to save space, but have made no other changes since then, other than transferring the project folder to another hard drive. Now every time I try to build the whole computer immediately shuts down.
My first thought, is somehow an asset went bad, but I have no idea how that could have happened because every thing worked fine five months ago. I can't even determine what causes the crash from the log because it happens immediately. I have tried transferring the project folder to other hard drives, but the same thing occurs. My biggest question is even with a corrupt asset why would the entire system shut down. I would think I would just receive an error message.
Thoughts on correcting the problem or any information as to what could cause the whole system to shut down would be appreciated. Thank you.

Jurgen,
Thanks for your reply. You are right, the key was in that file. (Volker also pointed me in that direction). For some reason it had a name for my server that was not in my CFTGCP #10.
WARNING => DpNetCheck: NiHostToAddr(PTC02.PTC) failed (rc=-2)
I do not know where it got that address from. It is close to the correct address but because it was not exactly correct the network access failed. Once I made the change the jobs stayed up.
On to to the next problem....
Alan

System Shuts Down with no Error in Log

Similar Messages

Maybe you are looking for