System shuts off after posting

X-((Just got my new board, install was easy... system does post but will shutoff less than a minute into Windows.  tried a differnet PSU (#%)watt) and the problem is still there.  Am now swapping Video Cards (vanilla Fx 5200).. any other thoughts??

Set DDR Power Voltage to at least 2.65; you can also try 2.7 and 2.8.
 Memtest86

Similar Messages

  • 975X Platinum PUE V2.0 Power shuts off after ~45 sec?

    I'm looking for help with a frustrating issue.  This is a new build with the following:
    *MSI 975X Platinum PUE
    *Intel Core2Duo E6600 2.4Ghz 2M 1066FSB Socket 775
    *XFX GeForce 7900 GT Video Card in PCIe
    *Old IDE HD with XP
    *New WD Caviar 250GB SATA
    *Kingston 1024MB PC5400 DDR2 667MHz Memory x 2
    The memory is in the DIMM1 & DIMM2 positions and the system will boot to the BIOS.  Without doing anything, the system shuts down after about 30-45 seconds.  Any suggestions would be very helpful.  I have searched the forums and FAQ and the only thing that it may be is the "Power On after Power Off" under the Power Management Page in the CMOS Setup.  I have not been able to try that yet, as the system doesn't stay on long enough.
    Thanks for any help in advance!

    I've never done that before. I usually still have my original media so that I can reinstall my programs.
    It is hairy but I am sure it is possible to manually move over all the required stuff so that it can work
    again. Several things to look into:
    a) Can you migrate checkpoints? XP creates checkpoints so that you can later rollback. My question
    is, can you use a checkpoint and move it over to a different computer? Probably not but it might be
    worth investigating.
    b) Manuallly do what an installer does.
      - first move over your program files directory to where you want it to reside
      - the nasty part is to somehow copy over the registry that refer to the programs that you just moved.
        Good luck on that one.
      - also inspect the system32 directory for dll's that applications sometimes install. Move those as well.
    I do recall, I needed to do something similar to what you are doing and it was a hit or miss depending on
    the program. Some programs just complained it wasn't in the registry and asked if I wanted to put it in.
    Those solved themselves. Things like Microsoft Word just insisted to do a reinstall.

  • Ideeacentre B520 Display Shuts off after 1 minute

    My b520 display shuts off after 1 minute.  None of the windows setting seem to affect it.  The user Manual for the system does not seem to address this.  What am I missing?
    Solved!
    Go to Solution.

    I found the problem.  it was the lenovo dynamic brightnes system. 

  • HP DV6-6B25TX shutting off after 10 to 15 seconds irrespective of battery power or AC power

    Hi,
    MY DV6-6B25TX is shutting off after 10 to 15 seconds irrespective of battery power or AC power.
    Following is the complete scenario of what happened during the last few weeks:-
    Two weeks back i was using the laptop with the AC adaptor plugged in for charging, the battery got charged upto 99% then it stopped charging and the battery icon text displayed, 'Plugged in, Not Charging'.
    A week back the battery was 20 %, after plugging in the charger, still the same message 'Plugged in, Not Charging'.
    Now the laptop doesnt respond to the power key when the battery is inserted.
    If i remove the battery and again put it back, it starts without pushing the power button and shuts off after 10 seconds, i.e. even before starting Windows.
    It shuts down even when on Bios Screen, so OS is definately not the issue.
    When i connect the charger and press the power button, same thing i.e. starts and shutts off after 10 to 15 seconds irrespective of BIOS screen or Windows Boot.
    I removed the ram and but it back again but still the problem persists.
    Also there is no question of overheating due to dust as i have barely used the laptop for a few hours, the laptop is around 6 months old and under warranty.
    Please Advice ASAP.
    Thanks in Advance.
    This question was solved.
    View Solution.

    Honestly, something is preventing the battery from being charged. The notebook shutting down seconds after reinserting the battery is a good indication the battery just isn't getting charged. This could be a failed battery, charger, charging port, or motherboard in rare instances.
    Since it is in warranty, I recommend contacting HP support as there is no easy fix for this on the forums. It is a hardware issue.
    The number for support in the U.S.A. and Canada is 1-800-474-6836.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Need help fixing video shut off after 2 minutes in non-windows mode

    Good morning experts in this forum,  I need your help solving a hardware/firmware problem of my computer. I have a Hpe 250f computer with Radeon 5700 series video card on it.  I recently noticed one strange problem which prevents me from doing any meaningful work in non-windows mode: The video will be shut off after around 2 min if the computer is not in Windows mode.  This includes BIOs mode and recovery mode.  There is no problem if the computer logs on Windows within 2 minutes.  But if I stay in BIOs settings or try to use HP diagnostics or try to recover a backup using windows backups for around 2 min, the monitor will turn blank and the power button of monitor will turn yellow from green indicating no video output to it.  It can not wake up by mouse or keyboard. I read that older BIOs have problem with fan speed and I reflashed the BIOs.   But it did not work. This problem drives me mad since I had occasional hard drive failures recently and I could not recover my system (That is why I noticed the problem recently, but the problem could have existed when I bought the computer).  Now the computer is out of warrenty and I could not find any similar case using Google search.  I really appreaciate your help. Thanks

    I had the same problem when I upgraded.  In my case it definitely was the power supply.  In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived.  Swapped in a 430W to test and everything was perfect.  At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

  • I have a Ipod shuffle 4th generation. I would like for the music to shut off after one hour long song automatically rather than go to the next song. Is this possible?

    I have an ipod shuffle 4th generation. I would like for the music to automatically shut off after one hour long song rather than going to next song on the list. Is this possible?

    Sorry, but it's not.  The only way to get this to work is to only put the one hour song on your Shuffle. 
    B-rock

  • Final Cut Pro Randomly Shutting off after Minutes

    Every time I open FCPX and begin editing it randomly shuts off after about 3-4 minutes. Regardless of what I am doing. I get no wheel or anything, it just shuts off clean. I am running the most recent update to Lion, FCPX 10.1 with 8GB of ram... this is really frustrating. Any thoughts?

    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.fcprescue.com and run it.
    http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
    Shane

  • IPad Personal Hotspot antenna shuts off after a few minutes of non-use. This happens in both Verizon 3G and LTE areas. Turning off LTE does not help. Turning Personal Hotspot off and then on works. Does this happen on Mini and Retina?

    iPad--third generation shuts off antenna/hotspot after a few minutes of non-use.
    Happens in 3G and LTE VZ environment.
    Turning hotspot off and on getsw things working again.
    Does Apple have antenna on a timer so it shuts off after a few minutes?
    Does this happen on Mini and Retina as well?
    FLAGSTAFFLAR

    Fixed!
    Two things together have restored connectivity.
    1.  I changed the name under Settings > General > About > Name from My Name's iPad to iPad of My Name.  I read somewhere that iOS 7.0.1 or 7.0.2 (I forget which) sometimes had issues with apostrophes here.  Easy enough to test.
    2.  I then reset (again) the APN settings under Settings > Cellular Data > APN Settings > Personal Hotspot and reentered our provider's info (APN, Username, Password) there.
    I don't know WHY it worked, but the personal hotspot is now happily sharing (again) internet connectivity with my MacBook Pro.

  • 15"Macbook Pro shuts off after 5 minutes when using full-charged battery.

    15"Macbook Pro shuts off after 5 minutes when using full-charged battery.  If not touched, computer stays on.  But start typing, it shuts off.  Was told this was a fan problem.  Had fan replaced last spring.  But problem has begun again.  Is this a battery issue or somethig else?

    Charge Information:
      Charge remaining (mAh):          3747
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          3899
      Health Information:
      Cycle count:          90
      Condition:          Good
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12382
    It says it looks fine....

  • Iphone 3g shuts off after the apple loading screen then cuts back on

    Iphone 3g shuts off after the apple loading screen then cuts back on by its self but when i connect it to a charger it works fine also my on/off button is unresponsive (i havent dropped it or wet it so im confused why its doing this)

    Welcome to the discussions,
    normally you could try to reset the phone by holding the sleep and home button until the Apple logo comes back. But since the sleep button is unresponsive, try to restore "as new iPhone", if necessary without using the backup afterwards, in case the backup contains corrupt data.
    Restoring: http://support.apple.com/kb/HT1414

  • My MacBook Pro starts and shuts off after loading for sometime

    My MacBook Pro starts and shuts off after loading for sometime

    Try starting in Safe mode by holding down the Shift key while booting. Safe mode takes a while to load the OS. After that, restart the computer normally.
    If that does not work, start up in Recovery by holding down the Command and R keys. In the window that opens, choose Disk Utility at the bottom and verify and repair your disk. Repair permissions while you are there.

  • IPod Touch shuts off after being locked 4 a while

    Hello, My iPod touch 4th generation will shut off after being locked. Sometimes when I lock it for 3 minutes it'll shut off I will click the sleep/wake button or home button and it'll do nothing, So I have to reset it by holding sleep/wake button for 30 seconds or something. One time I set a alarm for 3 minutes and it went off and it showed on the iPod's screen and froze! What I did was: settings, general, auto-lock and put to never because if I'll let it lock for more than 3 or 5 minutes it'll shut off. Any one know a reason this might be happening?
    Thanks for reading

    Try:
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Two Problems:MSN Won't Download,  Display Shuts Off After 1 Minute

    Hi ok so i have two problems, I had MSN 6.03 for a while but last night it just stopped opening, so I deleted it and tried to redownload, but when i try to download it, it says "failed to mount" every time.
    The second problem is the display shuts off after 1 minute, I went to the energy saver and i changed it to 15 minutes an I locked it, but when i exit out of the energy save it goes back to 1 minute HELP!!!

    Sounds like you have either cache, finder, or disk corruption problems. Follow the steps here:
    http://www.thexlab.com/faqs/repairprocess.html

  • Lenovo c200 3000, shuts off after 2, 3 min

    Hi there
    I have lenovo 3000 c200, it is 5 years old
    It shuts off after 2 to 5 min. First i thought it is from the fan and i changed it, but still the same. Then I reapplied the thermall paste and still no difference. The fan starts and stops for like 2 to 3 seconds. And then it shuts of. I ran out of ideas.
    I use windows XP service pack 3, I tried to reinstall it or recovery it, but it just shuts down. it also does not recognize the battery and does not charge it.
    The S/N is L3-EY486.
    Thanks in advance
    Ned

    my personal opinion, it's better to buy new computer instead of replacing the parts ( battery & fan )

Maybe you are looking for

  • How to change the default save encoding of the dvm files when create dvm???

    When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository. A

  • Web cam is not working for HP DV7

    I dont see the hardware or drivers for my WebCam it is not working and im not even sure it is installed anymore. I did not have a problem up until a few months ago not sure what happened. Can it be repaired?

  • Is my LaserJet 2100tn compatible with Mac OS 10.9 Mavericks?

    I would like to upgrade my Mac to OS 10.9 Mavericks, but I have an old HP LaserJet 2100tn.  Will that printer be compatible with the new OS?  I am currently printing to the 2100tn from OS 10.7.5 - Lion.   This question was solved. View Solution.

  • Problem in adding data to database thru UDO object

    hi i have created udo object thru b1 udo wizard...successfully with object type as "d1". and table name is "dummy". in that dummy table(master data table) i have added 3 user fileds called country, phone, email. and i have designed a screen with 5 co

  • Messages not being sent

    I am sending messages to a queue but the admin console shows that the queue is empty. No errors are shown java 1.4.2; jboss 3.2.6 my thread does this: ServiceLocator locator = ServiceLocator.getInstance();                QueueConnectionFactory connFa