System slow after adding sata2 hd k8n-slifi
hi.
recently added a 160gb 7200.9 seagate for more storage space but the system is slower now than before.
amd64 3200+ stock speed
k8n neo4 sli-fi
pc4000 geil 2.5-4-4-9 at pc3200 speed.
hitachi 7k250 160gb primary master
ibm 30gb primary slave
seagate 160gb 7200.9 sata2
nec 2510a dvd-rw secondary master
leadtek 7800gt
leadtek tv2000 expert - tvcard.
creative soundblaster audigy2
antec 380w truepower S
windows xp + sp2
latest drivers for both motherboard and gfx card from nvidia.
latest bios, v1.3.
if i unpack a rar archive from the hitachi to the seagate i get serious slowdowns in both windows media player and the tv-card software.
if i play a game installed on the seagate the computer basicly stops when loading data, even in games that used to run good from the hitachi.
i have had some problems when browsing with firefox 1.5.0.1 due to lack of cpu power.
installed nvidia sw-ide driver and it helped considerbly but i still get slowdowns.
these are problems i never had before i put in the seagate.
i have no problems with corrupted data and i have not tried changing sata port, its in number 3/4 now.
the harddrive is configured as one big partition with ntfs filesystem.
also noticed it takes along time to access the seagate the first time in a new explorer window.
when i click on the designated letter the explorer locks up for 5-10seconds and the hd-led is active and then i can se the content of the harddrive.
if i move a 700mb avi file from the hitachi to the seagate i can se in taskmanager that the process "system" consumes 45-70% of cpu power.
if i move the same file to the ibm harddrive instead the same process never goes above 7%
any ideas of what it can be and what i can do to fix it ?
/Tjabo
Quote from: slayek on 07-April-06, 09:37:51
Yes, there is new firmware for Seagate 7200.9 160gig SATA2 drives. If your firmware has lots of 2's, you gotta chage teh firmware. Contact segate support by email and they will supply you the files.
i know sandra is a lieng ***** but she claims the harddrive is on bios 3.AAD
Built2Last mentioned bios 3.AAE so will take a look if their is yet another updated to try.
Quote from: kakarocht on 07-April-06, 11:05:55
I think it could be your PSU problem as I can see more devices that you've now. Tried to borrow a psu from your with higher wattage. Gd luck
its not a psu error thats for sure.
the computer is 110% stable and is 110% stable with a 25% oc on the cpu and a 20% oc on the gfx card which pushes the psu quite far.
its all at stock at the moment.
Similar Messages
-
System slow after install Mavericks
I have an older Mac that became slow after installing Mavericks. I read a couple of discussions on here and found out about etre check. I downloaded it and ran it, and I am hoping one of the experts on here will be able to help me. Here are the results:
Hardware Information:
iMac (24-inch, Early 2009)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400 - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
HP IO - Path: /Library/StartupItems/HP IO
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
Oplmgr - Path: /Library/StartupItems/Oplmgr
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:5:4
Disk Information:
WDC WD6400AAKS-40H2B0 disk0 : (640.14 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 589 GB (114.52 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 50.27 GB (34.91 GB free)
OPTIARC DVD RW AD-5670S
USB Information:
Apple Inc. Built-in iSight
Seagate FA GoFlex Desk 3 TB
disk1s1 (disk1s1) <not mounted>: 209.7 MB
FreeAgent GoFlex Drive (disk1s2) /Volumes/FreeAgent GoFlex Drive: 3 TB (1.09 TB free)
Apple Inc. Keyboard Hub
Logitech USB Trackball
Apple Inc. Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.Logitech.Control Center.HID
com.logmein.driver.LogMeInSoundDriver (1.0.2)
com.Cycling74.driver.Soundflower (1.5.2)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[not loaded] com.logmein.logmeinblanker.plist
[loaded] com.logmein.logmeinserver.plist
[loaded] com.logmein.raupdate.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.splashtop.streamer-daemon.plist
[not loaded] com.teamviewer.teamviewer_service.plist
Launch Agents:
[loaded] com.Logitech.Control Center.Daemon.plist
[failed] com.logmein.LMILaunchAgentFixer.plist
[loaded] com.logmein.logmeingui.plist
[loaded] com.logmein.logmeinguiagent.plist
[not loaded] com.logmein.logmeinguiagentatlogin.plist
[not loaded] com.splashtop.streamer-for-root.plist
[loaded] com.splashtop.streamer-for-user.plist
[not loaded] com.teamviewer.teamviewer.plist
[not loaded] com.teamviewer.teamviewer_desktop.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.akamai.client.plist
[loaded] com.akamai.single-user-client.plist
[failed] [email protected]
[loaded] com.google.Chrome.framework.plist
[failed] com.google.GoogleContactSyncAgent.plist
[loaded] com.google.keystone.agent.plist
User Login Items:
Palm Desktop Background
Transport Monitor
iTunesHelper
SplashtopRemote
Volume_1
Music Manager
HPEventHandler
HP Scheduler
3rd Party Preference Panes:
Akamai NetSession Preferences
Citrix online plug-in
Flash Player
Flip4Mac WMV
Logitech Control Center
MusicManager
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
CitrixICAClientPlugIn.plugin
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
GarminGpsControl.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
LogMeIn.plugin
LogMeInSafari32.plugin
LogMeInSafari64.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Move-Media-Player.plugin
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 589 GB Disk used: 474.48 GB
Destinations:
FreeAgent GoFlex Drive [Local] (Last used)
Total size: 3 TB
Total number of backups: 116
Oldest backup: 2011-08-10 07:34:13 +0000
Last backup: 2013-11-15 06:32:36 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 589 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
21% backupd
7% kextd
3% mds
2% WindowServer
2% Finder
1% coreservicesd
1% mds_stores
1% EtreCheck
1% MusicManagerHelper
0% firmwaresyncd
Top Processes by Memory:
119 MB com.apple.IconServicesAgent
115 MB mds_stores
45 MB Finder
45 MB Dock
41 MB ocspd
41 MB mds
29 MB MusicManagerHelper
29 MB WindowServer
29 MB CalendarAgent
29 MB Splashtop Streamer
Virtual Memory Statistics:
1.91 GB Free RAM
1.01 GB Active RAM
353 MB Inactive RAM
504 MB Wired RAM
253 MB Page-ins
0 B Page-outs
Even if they are not a big problem, can anyone tell me how to get rid of the Palm and HP startup items. They are from old devices that I do not have anymore, and I would like to eradicate them from my system.Startup items are in /Library/StartupItems/
You can delete them if you are an admin user. However it doesn't remove the actual software. The safest way to do that is to either use the manufacturers uninstaller or try to find uninstall steps listed on a forum or support site.
I'm inclear on 'Oplmgr' check that is up to date if you can, since it is using the old way to load a startup job.
Palm desktop is probably version dependant (check what you have)…
http://kb.hpwebos.com/wps/portal/kb/common/article/5916_en.html
https://discussions.apple.com/thread/505278?start=0&tstart=0
Soundflower looks out of date? Grab the installer (with an uninstaller IIRC) and update or remove it.
LogMe In, TeamViewer & Splashtop are running jobs in the system level too, so I'd spend time checking they are up to date or removed if they are not needed.
The Launch Daemons and Launch Agents are 'system level, with your own user version too - User Launch Agents.
I would clean out the failed background job…
[failed] [email protected]
It will be stored at…
~/Library/LaunchAgents/[email protected]
Use the Finders 'Go Menu > Go to Folder…' to open the hidden ~/Library & look in the LaunchAgents folder for the .plist & delete it.
Reboot for the Startup items to be unloaded. -
System Slow after patching.
Hi All,
Ecc6,Oracle10.2, Unix, System is slow after patching the application server. Will there be any problem in the patch or itu2019s because the server has been restarted. If the second one is the case how long it will take to come to the optimal performance?
Best Regards,
A.KRun SGEN>Genereate all objects of selected software components> Select the Components for which u have applied the patches--> Select theserver and start the job directly.
Thanks,
Pundari
Edited by: pundari kakshayya on Mar 11, 2009 10:44 PM -
System.MissingMethodException after adding an optional parameter
I am getting error of System.MissingMethodException after I have an optional parameter in one component and the other component which call it was not build as it call it with old number of parameters.
Only component in which parameter is added was build an deployed as patch. The calling component is old as there is no change in it.
When the calling component run it gives error :
Exception Information
Exception Type: System.MissingMethodException Message: Method not found: 'LabelURLs IPSD.BnB.Transaction.Postage.GetLabelURLs(System.String)'. Data: System.Collections.ListDictionaryInternal TargetSite: Void GenerateScanForm(Int32, Int32) HelpLink: NULL Source:
BnBDispenseQueueProcess
As far as i know it should not raise an error as new parameter is optional. One more thing calling component(EXE) run as windows service.
we found an very wired workaround to make it run. By Removing the changed component once and run calling component which will say DLL not found. The place the same DLL again and calling component works fine:).
I think i am missing some internals of .net.
Let me know if more info needed.Hi,
Type with only optional parameter constructor and no parameter less, will throw this exception when trying to create through Activator.CreateInstance
This issue is addressed here,
http://connect.microsoft.com/VisualStudio/feedback/details/521722/system-activator-createinstance-throws-system-missingmethodexception-with-constructor-containing-an-optional-parameter
Is your component only have optional parameter constructor?
If this post answers your question, please click "Mark As Answer". If this post is helpful please click
"Mark as Helpful". -
System slow after Mavericks upgrade
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 0 days 1:42:46
Disk Information:
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 159.18 GB (14.34 GB free) (Low!)
OPTIARC DVD RW AD-5960S
USB Information:
SanDisk Cruzer Blade 4.01 GB
NO NAME (disk1s1) /Volumes/NO NAME: 4.01 GB (3.82 GB free)
Apple Internal Memory Card Reader
Generic Mass storage 1.01 GB
2 (disk2s1) /Volumes/2: 1.01 GB (876.4 MB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
[kext loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
[kext loaded] foo.ham (1.0) Support
[not loaded] org.virtualbox.kext.VBoxDrv (4.3.6) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.3.6) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.3.6) Support
[not loaded] org.virtualbox.kext.VBoxUSB (4.3.6) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.logmein.hamachi.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[running] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.palm.novacomd.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[loaded] com.google.keystone.agent.plist Support
[failed] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[running] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[loaded] com.divx.agent.postinstall.plist Support
[running] com.nero.HSMMonitor.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
iTunesHelper
Skype
Hotspot Shield
Canon IJ Network Scan Utility
TomTomHOMERunner
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.0.18358 Support
LogMeInSafari64: Version: 1.0.497 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.2 Support
LogMeIn: Version: 1.0.497 Support
Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
LogMeInSafari32: Version: 1.0.497 Support
googletalkbrowserplugin: Version: 5.3.0.18358 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: Java 7 Update 55 Support
Safari Extensions:
My eBay Manager: Version: 3.1.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
NPRoblox: Version: 1.0.2.12 - SDK 10.8 Support
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
DivX Support
Flash Player Support
Java Support
Perian Support
Time Machine:
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
2% WindowServer
0% fontd
0% ps
0% LogMeIn
0% aosnotifyd
Top Processes by Memory:
164 MB Safari
147 MB com.apple.IconServicesAgent
106 MB mds_stores
94 MB Finder
86 MB com.apple.quicklook.satellite
Virtual Memory Information:
629 MB Free RAM
1.72 GB Active RAM
942 MB Inactive RAM
503 MB Wired RAM
334 MB Page-ins
0 B Page-outs
Everything was fine until I upgraded from 10.7 to 10.9, now runs like a dog.
It'll work for a few seconds, and then stops for twice as long with the BBOD, then it comes to life again.
Any ideas would be fabulous.
Thanks in advanceIt's probably:
Virtual Box
Logmein (note the failed launch agent, which means it was incompatible, and that it loads a ton of background processes)
and Perian isn't supported by the developer anymore.
The Google keystone daemon is known for slowing down macs with excessive phoning home. See HOWTO: Remove Google Software Update on Mac OS X - Raam Dev
I'd uninstall those for starters.
And I'd get rid of as many of the other background processes as you can.
4 GB of RAM is probably not enough with all this stuff running all the time, particularly with emulation software. You can never have too much RAM.
A quick way to test this theory is a safe boot: (restart, hold down shift until you see the Apple logo). This does some diagnostic testing and then starts up without third-party added on software. Mac OS X: What is Safe Boot, Safe Mode? -
Make my system slow after sync...
After I installed software update (Magic Trackpad support) in my 2.93 GHz/4GB Ram macbook pro, after I plugged my iP 3G and sync with itunes, my whole system will slow down , even I switch other windows / programs even click the tools bar, it will appear color wheels. and the sync progress takes 2-3 times long than before.
Even I ejected the iphone and unplug it, the system still slow and jitter, Is anybody have the same problem ? and how to fix it ? thanksvikramkg wrote:
Hi
if i increase the memory will the system become faster.
No. Installing RAM doesn't make a computer faster.
Can we get it done this in Apple store
Sure, but why pay for that when you can do it yourself.
without upgrading hte memory cna we make this ystem to run faster ?
Have you checked activity monitor to see if any apps or processes are takin up a large percentage of the CPU? -
Mac Pro Slower after adding second hard drive
My work computer is a Mac Pro 3,1 running Lion 10.7.3 with 4GB RAM and a 1TB hard drive. It was performing well running programs like Adobe CS5 and Final Cut Pro until I added a second 1TB drive (Western Digital WD1001FALS). After that upgrade Photoshop is way slower while programs like InDesign and Final Cut are noticable slower.
Is there any reason for this? Anything that can be done outside of a memory upgrade?Let me try to direct you to some tips on CS5, and suggest that more hard drives properly used (OS, scratch, data, backup, array) can help, but that one drive and 4GB RAM is under performing.
Optimize Photoshop CS5
Optimizing Photoshop Overview
Adobe Photoshop FAQ
Optimize performance Photoshop
What are you using the WD1001FALS for? data? scratch?
And open Activity Monitor and check pageouts. Unless your use if very very light, I can't see that as being enough for even CS5 code and some OS X let alone any more apps.
Activity Monitor memory usage -
Mail is running slow after adding an Exchange account
I recently added an Exchange 2007 account to Mail in addition to 2 other accounts; MobileMe and Gmail. Since then, Mail has been very slow to respond to all interaction. While in the middle of typing, it will pause and then catch up to all my keystrokes. Clicking on a message takes a few seconds to get any response as well. This all goes for any email account, Exchange, Gmail, MobileMe.
I have tried rebuilding the mailboxes. Not sure what else I can try. Is this a common occurrence? Does is matter much that I have over 24,000 messages?Seems like this process worked out. I copied over the Mail folder in Library >Application Support, replaced Mail in Library and com.apple.mail.plist in Preferences. Feels much better <3
I'm thinking Mail just had enough after years of adding and deleting several email accounts. I also think Apple had changed the manner in which data is stored for Mail. The folder structures and file locations don't appear to be the same in the two user accounts. -
Help someone. I've installed Leopard three times, and even after the latest update 10.5.2 this problem is still persisting. The software installs without any trouble, all is well. All my software works perfectly and at the speed I would expect. I leave the machine for a few hours then begin some more work, it turns into a dog....cursor is erratic, when you type anything either in entourage or in word there is a huge delay. The mouse and cursor take a very long time to be effective. Not sure what can be done, I was hoping that this last update would fix this problem. I'm now back to using 10.4 until I can get this sorted out. Any help would be appreciated
Thanks
JamieCGDesigns wrote:
Help someone. I've installed Leopard three times, and even after the latest update 10.5.2 this problem is still persisting. The software installs without any trouble, all is well. All my software works perfectly and at the speed I would expect. I leave the machine for a few hours then begin some more work, it turns into a dog....cursor is erratic, when you type anything either in entourage or in word there is a huge delay. The mouse and cursor take a very long time to be effective. Not sure what can be done, I was hoping that this last update would fix this problem. I'm now back to using 10.4 until I can get this sorted out. Any help would be appreciated
Thanks
Jamie
It's clearly not Leopard. Something is wrong with your system - hardware most likely.
Updates do not fix individual problems such as yours, only general issues and security items.
I suggest running the Activity monitor and watching the CPU usage as it slows down.
It could be a bad HD or some thermally related problem. Leopard stresses the hardware far more than does Tiger, so if something is merely marginal with Tiger, it could show up in Leopard as a major problem.
I would guess RAM. Leopard is particularly tough on RAM, and if your RAM gets hot and some of it stops working, then your HD takes over, which, of course, would slow everything down.
The Activity Monitor will show RAM, RAM usage, HD usage, CPU usage, etc.
If you have reinstalled Tiger, then this whole thing is moot. You might install Leopard on an external drive for testing purposes, otherwise there is no way to diagnose anything. -
System Hangs after adding Storage :(
First dont jump on me for mentioning a 4800 this is storage related.
Solaris 8
Brocade 3850(SUN Branded)
SUN Samfs(4.2.8, running 5 months)
EMC Clarion(Old existing and always seen in config)
Infortend FC-SATA array(Newly added)
I have added some FC-SATA drives to my 4800s. The process of adding these drives was done by a 'cfgadm -c configure <Controller #>'. Following this the disks are seen, striped and shared with SAMFS. All is good at this point.
During reboot the systems hangs just after the boot message of "System is coming up". I think it is at the point of finding mount points and doing an 'fsck', but the system never completes(+45 minutes).
When I drop back to the original configuration prior to the 'cfgadm' the system then boots just fine, but I then need to do 'cfgadm -c .....' to see the drives and mount my SAMFS partitions.
Any ideas?SimonM
The disks can be seen when I attach the storage with a 'cfgadm -c configure <controller #>' and the system up and running. After dynamicly attaching the storage I can create filesystems, use SAMFS to share the filesystem out, and all is good across all machines.
I only have an issue later in life when a reboot(hate for a panic) occurs. Some sunsolve/goggle'ing found some old document that were very dated that pointed to the path_to_inst and fiber not playing well.
I am not 100% sure that the system has hit the mount/fsck processes or not but it is the next sequence in the boot process. I know it is storage/config related because (1) adding the new disks is the only thing that changed on the system, (2) returning the OS back to its original configuration before the disks being added allows everything to boot fine. I was just looking for some pointer of where to begin troubleshooting.
I will keep everyone updated. Like I said I only get a couple of hours every month if I am lucky. -
CNA becomes very SLOW after adding new switch to cluster
Added a CAT-2970 to my cluster and now CNA is acting very slow, especially when I attempt managing the new switch. I am still below the 16 node cluster limit. I did initially find a CRC on the new switch trunk port int. and noticed that it came up as Dynamic Auto/ISL and the core was at Dynamic Desireable/ISL, so I hard set it to Dyn-desire to match... still very slow CNA.
The problem was not there before and after restarting the application, it appears to be fine... until I attempt to manage/view/reach the new switch - and then EVERYTHING in CNA goes slow again (hourglass of death) for some period of time.
Yet, telnet & ping to new switch is always fast, no problems at all. Strictly seems to be a CNA problem...
Ideas??
Thanks,
AlLooking at the outline given by u,there may be several reasons for this slow access such as loose connection, improper trunking and so on.Ofcourse, CNA problem can also be one cause.But, if u r sure that it is a CNA problem, why not u try for a new version of CNA?First of all, which version of CNA r u using?is it CNA 1.0 or 2.0 version.If so, try installing or upgrading CNA3.0.
For detailed info on installing and upgrading to CNA3.0, the following URL will be useful.
http://www.cisco.com/en/US/products/ps5931/prod_installation_guides_list.html -
System slow after yosemite installation
I have a mid 2013 MacBook AIr. recently 'upgraded' to Yosemite and since the installation I have noticed a significant slow down of my OS. it's like there is something running in the background eating up all my memory. Is there something I can do to fix this issue?
Many thanks!
GGet rid of Trusteer. It doesn’t work well under Mac OS.
Trusteer Rapport Uninstall
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
System slow after update tu mountain lion
I just update my 2.53 GHz Intel Core i5 4 GB MacBook Pro from Snow Leopard to Mountain Lion but the hole system became too slow. Is there any suggestion to resolve the problem?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
Script Editor in Snow Leopard painfully slow after adding apps to Library
I have four different Macs that I use from time to time, and on each of them I notice a constant: adding more items to AppleScript Editor's Library window slows performance of mundane operations (opening a dictionary, switching between Library window and editor window, scrolling in the Library window, etc).
In Leopard, I noticed little to know latency in opening a dictionary in Script Editor, but Snow Leopard's AppleScript Editor kills my productivity by making me wait on it with most UI interactions with the Library window.Hello
I read another post of yours:
Topic : Issue with applescript and installer scripts
http://discussions.apple.com/thread.jspa?threadID=2143147
It seems that the installer is calling osascript which is run in 64-bit mode under OSX 10.6 whereas XSLT Tools.osax invoked in the script is in 32-bit mode only.
Until the osax becomes 64-bit capable, you may try setting /usr/bin/osascript to run in 32-bit mode. Perhaps by setting an option in Get Info window in Finder as explained in the AppleScript Release Notes listed earlier. (?)
I'm not sure but if Finder cannot do it for commands, you'd need to replace 'osascript' with 'arch -i386 osascript' in the installer script (if it's editable) or let /usr/bin/osascript be wrapped via arch(1) so that it is run in 32-bit mode.
cf.
http://developer.apple.com/mac/library/documentation/Darwin/Reference/ManPages/m an1/arch.1.html
Good luck,
H -
System Slow-Down After Printing
I recently installed Mountain Lion. Over the last couple of weeks I have noticed a significant operating system (10.8.2) slow down after printing with my Epson R3000 printer. This happens after every printing session. When I say slow-down I mean significant delays and dreading "beachballs" when opening applications, selecting menu items or anything else I should choose to do. I'm left with re-starting the computer to get going normally again.After re-atarting I have gone to "verify permissions" and I get approx "5" pages of permission errors, all associated with the printer library in some fashion or another. I then repair all those permissions and re-start my MacPro. The operating system then works as normal and I can use the computer with no problems (until I start printing again). I mainly use the computer for photo editing with Adobe Photoshop CS6, Adobe Lightroom 4 and Aperture 3.2.
I did not have this problem before upgrading to Mountain Lion (and then to 10.8.2). I did not get "significant" permission errors before upgrading. Since all printer drivers for this printer are handled now by Apple via the "new" Software Update process I can't even re-download the Epson printer driver and start over. I'm completely at a loss as to what, associated with the printer function, is causing these "significant" permission errors and subsequent operating system slow down. My printer is almost brand new and was working flawlessly before Mountain Lion. Let me be clear though, I can print fine. My problem is the system slow down after using the print function which I am only guessing has something to do with the "5" pages of permission errors after printting photos (with CS6/Lightroom/Aperture).
Incidently, I am not in any way a computer expert. Verifying and repairing permissions is about all I know how to do that's why I need help. I also just thought I would try the forums first before going to technical support to see what people thought about this.
Again, I repair the permission errors, re-start my system and all is fine. Any further suggestions would be deeply appreciated.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
Ipod Touch 2g will not turn on
Guys can someone help please , my Ipod touch 2g will not respond to anything , the screen is totally blank , i have tried charging through a proven source on another Ipod touch, I have tried restoring but nothing is happening any one know what I can
-
When I go to import footage into a new empty project, the Import window crashes, and then when I try to import again, all options on the menues are greyed out. It seems like a corupt software issue. Tried trashing preferences by using Shift command
-
One of my contacts is reduced to a single blue line
I have one contact, and only one, that appears in my message list as a single blue line, where all of the others are properly displayed with the name of the contact. Does anyone have any ideas as to how I can get that one contact to display properly.
-
LR 2 , 64-bit crashes on MAC
Hi, I have a very strange problem. After upgrading to LR2, the 32-bit version works fine on my MAC. But when I want to start the 64-bit version, it crashes after 3-4 seconds. Even after deleting the preference files, it simply crashes. I run OSX 10.5
-
FEATURE REQUEST: Add to Favourites
In the iTunes Store, it is sometime possible (not consistently though) to add titles to favourites. This is very helpful. I wish we could do that in the App Store as well. Don't always remember the app names, then it's hard to find again. Please?