System stars, restarts, then restarts and then restarts, never video, just a constant power cycle
Product: HP Paviliion
Model: MS237
Product #: WW650AA
OS: Windows 7
Note this is a neighbors PC, there older but am told it just stopped working. No physical damage, etc.
Bute, as the subject states, when powered on, the desktop power supply fires, you hear the CD spin up, HD sounds like it spins up, then it all shuts down. Kept plugged in, it does that for around 3-5 minutes, then the power stays on longer, rather than an on, off every second or two, the fan stay's spinning for now 7 or so seconds, the powers down, back and forth with the same cycle.
I don't mind switching out a PS or anything else, just need a little help as I am not an HP guy. I don't get any video, no BIOS beeps, etc. so any help on how to diagnose is appreciated. Since this is an all in one, I did remove the back, ensure RAM was seated and cables tight, but I am leaning twords a power supply, just not sure.
Thanks.
Hi As you have already verified the memory sticks and other basic stuff, I suggest to check the following link. This has the all the steps that is necessary to troubleshoot the startup problem:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02191455&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
I work for HP....
........................just trying to help where I can, but not speaking on behalf of HP.
Clicking Kudos! is a nice way to say "Thank You" if this helped you .... also mark "Accept It As A Solution" so that others get a benefit from it..
Similar Messages
-
My Itunes update hung up (for an hour) and wouldn't complete. I had to power cycle the computer. Now Itunes won't open / start.
In iTunes go to the Edit menu, then preferences. Click on the "Devices" tab. In there you will see a device backups section. If there is nothing there then you did not backup to your computer first. It is also possible that you were backing up to iCloud before updating. That is harder to check with an iPhone that is logged into your account.
-
What can I do to be able watch video on the Air Mac. Just downloaded the Flip Player and has the audio, but no video.
Thank youThe most common cause of missing video on playback with the Flip Player is that you are using an unsupported codec.
This issue is not directly related to Apple networking. You may find that you can get a better response if you visit the Telestream Flip4Mac support site. -
VDSL modem in sync, HH3 and HH2v2 power cycles int...
Dear All, Firstly this is my first post on the forums so hello to all. On to my topic, A friend of mine has a very very interesting FTTC fault. The VDSL modem is in sync, but the HH3 from 3 blue lights, will suddenly shut off and restart. This happens any ware between every 10-45 mins. Here is the fun bit: Engineers have replaced the modem and the HH3 3 times. They have even tried a HH2 infinity router which lasted longer than the 3 but to no avail. The modem and Router are both plugged into a surge protector. They have both been tried on regular sockets. The VDSL modem is always happy, in sync but the routers are being power cycled. There is no line issues, no CRCs as the engineers have said. The speeds to the VDSL modem are all fine, and the speed of the BB is working fine, its just the random power cycling of the routers that has everyone stumped. Yes its been turned off and on Yes its all plugged in Yes all cables have been tried and tested One Ethernet device, other wireless laptops There is no trigger, weather simple MSN text or HD streaming there seems to be no trigger as such for the router So tech guys, i would not bother you with a simple one, here is the mystery, whats the theory's?
After a worrying start very nice replies thanks guys! so firstly
@ HH replacements he had one, BT sent him one and the engineer used one. I know for a fact these are all from different batches.
@ channel changing Not only would the amount of random channels the smart wireless would have been using with the ammount of swaps, the engineer set the wireless channel whilst doing interrogations on the router.
@ electircal supply Here was the ebst bit, the engineer knows about REIN (f Repetitive Electrical Impulse Noise). In the room with the router there are LOTS of powerboards and power adaptors link multiple supplys. There are pets, a pc, standard sky tv boxs and relavant go withs. SO yeah lots of stuff. The uncle is a sparky, checked the house and said all good. We have a UPS (i think thats what it is called) which can deliver a constant voltage no matter what, even from that it was going fine then boom power cycle.
Feed back from 12 hour obs: The HH2 apparently has made it much more berable, taking around an hour or more till it resets. Engineer came round and did a lift and shift to get a new port from the dslam. At that point the engineer had been told he had to leave, but he justified it. There was nothing else that they can do, port, line, socket, HH modem have all been eliminated from the enquiery.
At this point the router had been moved by the enginner to the best poisbble location in the lounge for it to not be near a source of potential REIN. Then he told us that he wanted to find out what the problem was because it was a "mystery" and he was interested. He told about REIN and how to test for it (AKA long time of having not a lot plugged in and before anyone got mad (and lets be real this guy was not just going to come over and say "sorry man we don't know how to fix this" ) he also advised us to talk to our Service provide (aka BTR ) and to tell them what the issues are. So what do people think of this ? -
My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. I have tried several times to get it past this point but tnothing helped.
I have an appointment at the Apple store today, but was wondering : will all of the information and files on my desktop be lost? Or is this a logic board problem?
Any help is much MUCH appricated.I'm not sure, if you're out of warrenty it'll cost quite a bit for the replacement of the logic board replacement...unless you have apple care. you could ask apple to try and recover your hard drive but i'm not sure.
-
I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???
Hello Don,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this(it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with these articles if you continue to experience issues with iTunes:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
FX5900XT-VTD128 - System keeps restarting
My system keeps restarting and windows is saying it's a graphics card driver problem.
The driver I am using is v6672 from MSI LiveUpdate.
I am currently running this card on:-
AMD AthlonXP 3200+
2 x 512Mb 400Mhz DDR RAM (Dual Channel Mode)
MSI K7N2 Delta-L Motherboard
PSU - 400Watt Ebuyer Value
Sometimes I can play a game full resolution for ages and it won't crash and sometimes just 5 mins. Also it will reboot while doing simple things.
Any help would be appreciated, thanks.0 - System Timer
1 - Keyboard
3 - COM2
4 - COM1
6 - Floppy
8 - System CMOS
9 - MS ACPI-Compliant System
12 - Mouse
13 - Numeric Data Processor
14 - Prim' IDE Channel
15 - Sec' IDE Channel
16 - Creatve SB Audigy 2 ZS
16 - VIA Rev 5 or later USB Universal Host Companion Controller
17 - OHCI Compliant IEEE 1394 Host Controller
17 - VIA Rev 5 or later USB Universal Hopst Companion COntroller
18 - VIA USB Enhanced Host Controller
19 - NVIDIA GeForce FX5900XT
20 - Standard OpenHCD USB Host Controller
21 - Standard Enhanced PCI to USB Host Controller
22 - Standard OpenHCD USB Host Controller
Thats the full list, in my machine I have
AGP - FX5900XT
PCI - Soundblaster Augigy 2 ZS
PCI - Ebuyer USB 2.0 5 Port PCI card 4 external
It's strange, the lock ups just occur after a while. I've been playing Doom 3 high resolution for ages today and nothing happened. Yet I could go to bed tonight and wake up to a BSOD. Then sometimes I could be doing something in Office and it will just BSOD. I was using the PC for around 6 hours yesterday before it happened. All graphics are fine in the games I've played, so it must be something else.
I've done MEMTEST and that was fine, and also ran CPU test and that was fine.
But...I noticed today there was something new on my motherboard that wasn't on my old. A 4 Pin connecter and the mobo manual says it powers the CPU. Well I've connected this up and booted the system and no BSOD so far, but will let you know if it does. -
Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.
Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X. -
how do i restart my ipod touch if the power off button does not work and it is disabled and it say connect to Itunekyl
Place the iPod in recovery mode using this program. and then restore via iTunes.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
just baked up my macbook pro to an external hard drive. my computer died on me and i plugged it in and rebooted it ,started time machine and finished backing up but. just wondering if thats good or should i delete and restart
I wouldn't trust that backup.
Make sure the system is connected to AC and Do Over. -
I have a MacBook Pro 13.3 OS- MAC OS X LION.
Whenever I am staring the computer, it says You need to restart your computer by pressing the power button.
I did this number of times and everytime it freezes to the same screen.Solution needed urgently pls.
Thank you for any help in this regard that comes fast.The details of the kernel-panic report is as follows-
Interval Since Last Panic Report: 1458653 sec
Panics Since Last Report: 6
Anonymous UUID: 70BA6A**************************************************
Sun Sep 16 23:00:13 2012
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff8000290560, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000800028, CR3: 0x000000000a509005, CR4: 0x00000000001606e0
RAX: 0x0000000000000001, RBX: 0x0000000000820000, RCX: 0xffffff801122dc40, RDX: 0x0000000000020501
RSP: 0xffffff80ef3d3da0, RBP: 0xffffff80ef3d3dc0, RSI: 0x000000002b1d78b6, RDI: 0xffffff800342d280
R8: 0xffffff80ef3d3f08, R9: 0xffffff80ef3d3ef8, R10: 0x000000010d901000, R11: 0x0000000000000206
R12: 0xffffff800342d280, R13: 0x0000000000000000, R14: 0xffffff8011cd6500, R15: 0x0000000000800000
RFL: 0x0000000000010206, RIP: 0xffffff8000290560, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000800028, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80ef3d3a50 : 0xffffff8000220792
0xffffff80ef3d3ad0 : 0xffffff80002c4794
0xffffff80ef3d3c80 : 0xffffff80002da55d
0xffffff80ef3d3ca0 : 0xffffff8000290560
0xffffff80ef3d3dc0 : 0xffffff800026c9c3
0xffffff80ef3d3f40 : 0xffffff80002c3fbb
0xffffff80ef3d3fb0 : 0xffffff80002da481
BSD process name corresponding to current thread: fsck_hfs
Mac OS version:
11E2620
Kernel version:
Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 4850001132
last loaded kext at 1796984176: com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.7f2 (addr 0xffffff7f80e16000, size 57344)
loaded kexts:
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.7f2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.4
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 560.7.21
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.0.8
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBEHCI 5.0.7
com.apple.driver.AppleUSBXHCI 1.0.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.7f2
com.apple.iokit.IOBluetoothFamily 4.0.7f2
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.4
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.4
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.0.7
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.0.8
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
System Error- restart not possible - Error Message in MONI
Hi,
Though my flow is running fine. with success flags, there are couple of below error messages.
System Error- restart not possible
Message ID D59F2131E30E45E21D5BADCC8C0F8656 for pipeline CENTRAL version 000 already exists in system
why am I getting these errors..
Regards,
VarunWhat was the status of your server (XI/ PI and the receiving application) at the time of processing of these messages? Also check if the payload was sent with all the required information.
Regards,
Abhishek. -
Why does system automatically restart?
After about 10 minutes of inactivity the system automatically restarts requiring me to log-in again. This happens irrespective of the Energy preference settings.
Gunner105 wrote:
After about 10 minutes of inactivity the system automatically restarts requiring me to log-in again. This happens irrespective of the Energy preference settings.
Welcome to Apple's discussion groups.
Does the system really restart or just log you out? (If it restarts there will be a chime and the system will be busy for several minutes before showing you the login screen again.) If it's really restarting, you might find an explanation in a log file using the Console utility. If it's just logging you out, I'd look in the Security panel of System Preferences and check the setting for "Log out after nn minutes of activity." -
I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.
I occasionally get an error that forces me to shut down/restart my computer. After restart, a message pops up stating that an error has occurred and a report will be sent to Apple. This has been going on for several months, and Apple has never contacted me about this problem. Other than the forced shutdown/restart, I have had no problems with Garage Band.
Maybe you are looking for
-
Where is the binary data of this icon stored and retrieved from Application server?
Hello guys, Today I observed one phenomenon and could not explain it per my knowledge. I have one url which points to an icon in application server: https://<host name>:44301/sap/public/bc/ur/nw5/themes/sap_corbu/common/libs/Icon/SuccessMessage.gif I
-
Can't Print PDF Consistently from Preview Application
I am running OS 10.3.9 and Preview 2.1.0. I have downloaded a PDF file that has 16 pages. I have tried to print the document to my LaserWriter 16/600PS and HP 2510 PhotoSmart All-in-One printers. I can't get pages to print consistently. If I select "
-
How can I monitor status of a task over time
I have a application which contains a Tree control and a Button control. The Tree is used for representing a XML file content, and the Button is used for buliding XML files. the brief work flow is like below: I click the Button to invoke a Java funct
-
How to make reference wbs custom data carried to new wbs when using custom tab and custom table
I created a custom tab for WBS elements by using user exit CNEX0007 and custom screen and put a table control in it. As table control's data has to be stored in a table I could not use append structure of PRPS. When I used reference wbs, PRPS custom
-
BAPI/Function Module for CA02 - Change Routing
Dear Experts, I have an requirement to do material assignment for an existing Group Number like we do manually with t-code CA02. Can anybody know any BAPI/FM that can do Material Assignment in CA02 transaction? Regards, Rick