System Start Up Fails Windows 7
HELP!!!! Please anyone out there it's my laptop when I turn it on it goes as far as the Windows Logo and then just a blank screen. I have my System Recovery CD and also my Boot Manager CD so I have installed both and still nothing.
Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
[SOLVED] Systemd - console-kit-log-system-start.service FAILED
Hi!
i'm using systemd, and i removed initscripts and sysvinit.
I've now noticed this error, it seems that service failed to load.
By the way, i can systemctl restart it, and then it will be active and running. So, where is the problem? I found this, that seems to be my same problem, but it is 2 years old! https://bugzilla.redhat.com/show_bug.cgi?id=632714 .
Any idea?
thanks!
Last edited by nierro (2012-07-31 18:59:21)Looking into the issue, i can't find a solution...
so, here there are :
systemctl status console-kit-log-system-start.service
console-kit-log-system-start.service - Console System Startup Logging
Loaded: loaded (/usr/lib/systemd/system/console-kit-log-system-start.service; static)
Active: failed (Result: exit-code) since Tue, 03 Jul 2012 09:34:45 +0200; 1 day and 3h ago
Process: 175 ExecStart=/usr/sbin/ck-log-system-start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/console-kit-log-system-start.service
and
journalctl -a | grep console-kit-log
Jul 03 09:34:45 arch systemd[1]: console-kit-log-system-start.service: main process exited, code=exited, status=1
Jul 03 09:34:45 arch systemd[1]: Unit console-kit-log-system-start.service entered failed state.
Any idea?
EDIT:as i said, i can restart it, without any sort of problem, so i guess the issue is related to the deps of this service (After=...). I left it untouched, never modified this service...
Last edited by nierro (2012-07-04 12:11:10) -
I want to switch between Mac and Windows 7 Operating System. I am only able to start Windows. Please Help
If you reboot and hold the Alt key down after you hear the chime is the Macintosh HD shown as a boot option?
-
0xc000025 - Trying Recovery System via Recovery Manager: Windows failed to start.
Name: Pavilion dv4-2161nr
Prod. Number: WA691UA#ABA
Windows 7 64-bit
I splitted original Hard Disk Partition in three partitions. I formatted those two not containing O.S. Now I want to format the partition containing the O.S.
1) If I choose "Recovery System", will it format all three partitions? Or will it format the partition I choose to?
2) I tryed "Recovery System", but it failed. What can I do?
2.1) I made Recovery DVDs when first used the PC. It loads but it never runs. It's like theres no AutoRun, and there's no ".exe" to execute when I open the first DVD Recovery via Windows Explorer. What am I missing?
2.2) I tryed Recovery System via Recovery Manager. System shuts down and starts reiniciating but it gives the following message "Windows Boot Manger: Windows failed to start. A recent hardware of software change might be the problem. Status: 0xc000025. The boot selection failed because a required device is inacessible". What can I do?
Regards,
Rafael.I tested the Hard Drive and it passed 100% ok.
I tested the Memory and it passed 100% ok.
My PC runs a Win 7 Home Premium.
I've just run a Win 7 Ultimate CD Installation. It formatted the System Partition, but I couldn't get Win 7 installed because when I filled in my Product Key it said the Product Key wasn't right. Is it because Product Key for Win 7 Home Premium wouldn't work on a Win 7 Ultimate installation?
I hoped the Hard Drive would be ok after it had been formatted while I tryed Win 7 Ultimate installation. So I tryed once again to boot with HP Recovery Disc. It stopped at 23% once again. Until 23% there are all noises that get me thinking PC is running ok. When it get up to 23% all noises just stop.
Any ideias?
And thanks once again.
Rafael. -
PLEASE HELP
Hi,I am trying to do factory recovery of my HP DV6 laptop using original HP recovery disc.My laptop has Windows 7 (64Bit) OS. I am doing below steps
By pressing F10,entering BIOS mode, changed the BOOT ORDER to take from CD ROM and saved the setting with F10 option and then forced shutdown the laptop and inserted the 1st recovery disc
Restarted the laptop and it started to boot and it asked for all 3 recovery disc + Supplement driver disc. All were successfully copied and installed. Laptop was restared multple times as it was being displayed on screen. I could see there were Softwares being installed, Service setting,registry setting being applied to computer and after around 1 to 1.5 hours laptop gets shut down, so i beleive all installations have been [performed.
Now when i start my laptop, it says
Windows was not shut down properly choose an option and when i seelct either of the 4 options like Satrt normally or Start with command prompt or Start with Networking...everytime it takes me to screen giving belwow message:
SAVE LOGS DETAILS RETRY
In Details logs, i see below as the message
P2PP BURNBOOT Check failed
Possible causes:
1. Yellow-Bang occured at device manager
2. Some silent-install failure of applications
3. Found failed at PININST_BBV
4. Found failed at PININST_BBV2
5. Found memory Dump file
Suggestion:
1. Checking REGDEV_BB.log for drivers
2. Checking BBApps.log for applications
3. Checking MEMDUMP_BBV.log for memory dump file
1. After reading forums queries, I tried to set BIOS default by pressing F9 andf then pressing F10 ,saving and exit and then tried to reinstall everything but i get the same error.
2.I tried changing the system date from March 18th 2015 to March 18th 2012 and then do recovery , but still getting same error
3. I pressed F2 and did all Memory and Hard disk test and it all passed.
So Can anyone please help me whats the issue. ThanksHi there @VKD1
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your notebook is not starting after a system recovery, with a "Windows was not shutdown properly" error message.
See if you can run the startup repair:
How to Run a Startup Repair in Windows 7 - sevenforums.com
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
Cecil Mayfield here: I've cnanged operating system from XP to Windows 7..My Classic 120gb will not sync any new songs,Once I was asked
to restore,It erased and re-sync ok...Restoring all 17000 songs.I only get messages thst someone else is using my system when i now
connect up!!!! When i had XP with servce pack 3 all wa well. NOW WINDOWS 7 service 1 has failed to download severial times,Could this
be our problem..SERVICE PACK ISSUE.
My ipod is freezing up when I skip songs,then after a space it will unfreeze:Never has this before happen.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!Your whole bookmarks story is very confusing to me. Perhaps someone else can explain that better. :)
Can you give me your crash reports?
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here. -
I fail to start the sap server with error:Operating system call recv failed
I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 12784 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c 7883] -
Windows 2012 System State Backup Fails
We have a Windows 2012 Domain Controller VM that we would like to backup the System State using DPM. Agent has been installed and the Windows Backup has been added.
When the backup runs in DPM, the job fails. Here is the error code:
DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x12363C0). (ID 30229 Details: Internal error code: 0x80990ED0)
When we try and create the backup using Windows Backup, the following error is in the log file:
following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
We have tried attaching a separate drive and backup to a shared location. Both fail.
We have tried backup of just a few files on the DC instead of the System State, this fails as well.
All VSS Writers show as Stable with no errors
Server has the latest updates
Server has been rebooted, same issue
VM is Windows 2012 on a Windows 2008 R2 clustered host and is using Dynamic Disks (not fixed disks).
Anyone have any thoughts on what could be going on?Hi,
If any of the following are true, you will not be able to backup a system state to that volume.
• Make sure that the target volume has no shadow copy before the backup starts.
• If a system state backup is stored on a source volume, backup settings should be configured for full backups. By default, settings are configured for full backups.
• Periodically check that no other user or program maintains a shadow copy on the target volume.
• Do not keep volume level backups and system state backups in the same location.
• The volume used to store the system state backup needs twice the amount of free space as the size of the system state backup until the backup completes
Meanwhile please check if it is caused that you are backing up to a critical drive. Try modify the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wbengine\SystemStateBackup\
Set the value of this entry as follows:
Name: AllowSSBToAnyVolume
Data type: DWORD
Value data: 1
If you have any feedback on our support, please send to [email protected] -
Window System Image Backup Fails to Back Up EFS System Partition
I am trying to use WBADMIN to take a complete system image of my system with the following command:
wbadmin start backup -backuptarget:[NETWORK SHARE] -include:C: -allcritical
WBADMIN is able to create shadow copies of all the volumes on my system, but when it begins to create a backup of the EFI System Volume, it fails immediately:
The backup operation to [NETWORK SHARE] is starting.
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a shadow copy of the volumes specified for backup...
Creating a backup of volume SYSTEM(EFI System Partition) (300.00 MB), copied (0%).
Summary of the backup operation:
The backup operation stopped before completing.
The backup operation stopped before completing.
Detailed error: The I/O operation has been aborted because of either a thread exit or an application request.
Log of files successfully backed up:
C:\WINDOWS\Logs\WindowsBackup\Backup-01-02-2014_18-45-09.log
Log of files for which backup failed:
C:\WINDOWS\Logs\WindowsBackup\Backup_Error-01-02-2014_18-45-09.log
There was a failure in preparing the backup image of one of the volumes in the backup set.
The I/O operation has been aborted because of either a thread exit or an application request.
The system is encrypted with Bitlocker, and does not have a TPM. I am also running Carbonite, but I have disabled it and the results are the same.
No data is actually written to the log files either, which is strange. The GUI System Image Backup utility also provides virtually the same error. Any thoughts?Hi,
Try to test in WinRE to see what the result is.
Alex Zhao
TechNet Community Support -
Upgrade phase STARTSAP_NBAS error: SYSTEM START failed
During an upgrade from BW 3.5 to BI 7.0, I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
The same thing happens when I try to log on as SAP*. I am certain that
the password I submit is correct. I have not changed this password at
any time.
I have included SAP_BASIS support package 14 into this upgrade, and
this requires kernel version 133 at least (Note 822379). This kernel
was copied into the usr\sap\put\exenew directory before the upgrade
began. However, the system still seems to run on kernel version 111.
I have tried to put the 133 kernel into
F:\usr\sap\BWS\SYS\exe\nuc\NTAMD64 so that it is copied into
F:\usr\sap\BWS\SYS\exe\run during system startup, but then all my work
processes die. The gateway also seems to be down using this kernel.
Please help!
Regards,
ThomasHi.
I made a stupid mistake.. the kernel I was using was unicode, but I should use a non-unicode kernel..
Regards,
Thomas -
System Image Backups fails after upgrading to Windows 8.1 with 0x80040154
Backed up a Windows 8.0 system to DVD with no issues. Upgraded the computer to 8.1, and now when we tried to backup the system to DVD, we are getting the error message "An error occurred, class not registered (0x80040154)"
Anyone have any suggestions on how to fix this issue?
RichardHi,
According to your description,did you format the BD-R disc ?
Before you start system image backup, please format the BD-R disc.
For more information, you may refer to:
0x80040154 error may occur when you create a system image backup in Windows 8.1
http://support.microsoft.com/kb/2934165/en-us
Regards,
Kelvin Xu
TechNet Community Support -
I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!
Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems. -
Starting and Stopping SAP Systems and Instances on Windows
Is there a way to automatically stop/start instances on windows at boot time?
I don't want to have to logon after a reboot and go into the mmc and start the app manually.
Thanks,
DanDan ,
As Juan said it could cause problems while starting SAP at startup.
Still if you really want to implement this...
This is what I have found ... I never tried this but hope this should work.
1. you must make sure that SAP[SID]_00 service is set to start automatically.
2. you must edit your SAP START profile and add this line:
Autostart=1
3. make sure that the line you added IS NOT the last one in your file. if it is, your added parameter could be ignored.
to test this out, shutdown SAP and your database, then shutdown the SAP[SID]_00 service. now start it. open SAPMMC to see if you see any starting activity. it should work fine.
Let us know if it works. -
System Image Backup in windows 8.1 not working
Hi,
I am trying to take system image backup on windows 8.1 with USB drive attached and I am getting the following error which is given at the end of the post. It always says the backup location is invalid.When I tried with -allCritical it fails with
I tried to wbadmin enable backup, that also fails with "Warning: The ENABLE BACKUP command is not supported in this version of Windows. The operation ended before completion."
Can someone help with the wbadmin backup, please. It seems to be a red-herring.
PS C:\WINDOWS\system32> wbadmin start backup -backupTarget:E: -include:c:
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2013 Microsoft Corporation. All rights reserved.
Retrieving volume information...
This will back up OS(C:) to E:.
Do you want to start the backup operation?
[Y] Yes [N] No Y
ERROR - The specified backup location could not be found or is not a
supported backup storage location.
PS C:\WINDOWS\system32> wbadmin start backup -backupTarget:E: -include:c: -allCritical -quiet
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2013 Microsoft Corporation. All rights reserved.
Retrieving volume information...
This will back up ESP(EFI System Partition) (500.00 MB),OS(C:),(\\?\Volume{26a2e53d-6299-4ef1-a7e7-860f1e839ed6}\) to E:.
ERROR - The specified backup location could not be found or is not a
supported backup storage location.Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support -
STARTSAP_NBAS - status NO SYSTEM START
Hi all,
I'm upgrading R/3 4.7 to ERP 6.0 SR3 NUC; Windows 2008 + SQL Server 2008. I'm in weekend downtime. In phase status STARTSAP_NBAS I have the error:
UPGRADEPHASE STARTSAP_NBAS
...started at 20140222060031
# Reading Parameter File "D:\usr\sap\put\bin\ALPALL.LST" at 20140222060031
..finished at 20140222060636 with status NO SYSTEM START.
...begin dialogue at 20140222060636
tp.ECO log:
SAPup> Starting subprocess tp.exe with id 5024 at 20140222061006
EXECUTING D:\usr\sap\<SID>\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\SHADOW.TPP unlocksys <SID>
Environment: dbms_type=mss
Environment: dbs_mss_schema=<sid>
initial value of NLS_LANG: '<NULL>'
This is D:\usr\sap\<SID>\SYS\exe\run\tp.exe version 372.05.88 (release 700)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
TRACE-INFO: 1: [ dev trc,00000] Sat Feb 22 06:10:08 2014 2182 0.002182
TRACE-INFO: 2: [ dev trc,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 0000000187740000
TRACE-INFO: 3: 10 0.002192
TRACE-INFO: 4: [ dev trc,00000] using "D:\usr\sap\<SID>\SYS\exe\run\dbmssslib.dll" 9 0.002201
TRACE-INFO: 5: [ dev trc,00000] Thread ID:5516 1590 0.003791
TRACE-INFO: 6: [ dev trc,00000] Thank You for using the SLODBC-interface 11 0.003802
TRACE-INFO: 7: [ dev trc,00000] Using dynamic link library 'D:\usr\sap\<SID>\SYS\exe\run\dbmssslib.dll' 19 0.003821
TRACE-INFO: 8: [ dev trc,00000] dbmssslib.dll patch info 40 0.003861
TRACE-INFO: 9: [ dev trc,00000] SAP patchlevel 0 9 0.003870
TRACE-INFO: 10: [ dev trc,00000] SAP patchno 353 8 0.003878
TRACE-INFO: 11: [ dev trc,00000] Last MSSQL DBSL patchlevel 0 11 0.003889
TRACE-INFO: 12: [ dev trc,00000] Last MSSQL DBSL patchno 350 9 0.003898
TRACE-INFO: 13: [ dev trc,00000] Last MSSQL DBSL patchcomment Work process can not be cancelled (1740162) 12 0.003910
TRACE-INFO: 14: [ dev trc,00000] lpc:(local) connection used on SAP<SID> 534 0.004444
TRACE-INFO: 15: [ dev trc,00000] ERROR: -1 in function ExecuteAndFlush (SQLExecDirect) [line 5520] 78212 0.082656
TRACE-INFO: 16: [ dev trc,00000] (15157) [42000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Setuser failed because of one of the following reasons: the database principal '<sid>_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
TRACE-INFO: 17: 29 0.082685
TRACE-INFO: 18: [ dev trc,00000] <if user_name() != '<sid>_shd' setuser '<sid>_shd'> failed -- connect terminated 32 0.082717
TRACE-INFO: 19: [ dblink ,00433] ***LOG BY2=>sql error 15157 performing CON [dblink#8 @ 433] 57 0.082774
TRACE-INFO: 20: [ dblink ,00433] ***LOG BY0=>Setuser failed because of one of the following reasons: the database principal '<sid>_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission. [dblink#8 @ 433]
TRACE-INFO: 21: 23 0.082797
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
tp finished with return code: 232
meaning:
connect failed
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: Connect to <SID> failed (20140222061008, probably wrong environment).
Process with ID 1756 terminated with status 232
<SID>Adm User has this environment variables:
dbms/type = mss
dbs/mss/server = <HOST>
dbs/mss/dbname = <SID>
dbs/mss/schema = <sid>
I check the following SAP Notes:
- 128126 - Database connect for external tools
- 525677 - Problems when starting shadow instance
- 592514 - MSSQL: internal database users, permissions and security
- 1294762 - SCHEMA4SAP.VBS
- 1727986 - Upgrade Phase MAIN_NEWBAS/STARTSAP_NBAS: Error Starting SAP
- 1910759 - Start of Shadow Instance Failed during upgrade
but any of them, help me to fix the stopper.
Can anybody give me any idea, please?Hi Javier,
Have you tried by executing script mssupgsps.sql ,which you can find under D:\usr\sap\put\bin.This script will create stored procedure sap_upg_getrelease.
After execution provide grant with following
add setuser '<sid>'
grant all on sap_upg_getrelease to <sid>_shd
Hope this will help you.
Regards,
Gaurav
Maybe you are looking for
-
ASA 5510 Not able to route traffic between 2 LAN interfaces
Hi everybody, I need help to enable traffic between two physical ports on my Cisco ASA 5510. I created access rules and NAT but traffic doe not go from accounting interface to Inside. I am able to access internet from both interfaces. Can someone pin
-
AT SELECTION-SCREE / AT SELECTION-SCREEN OUTPUT
Hi, I have 3 check boxes in my selection-screen. My requirement is if I check any one checkbox out of 3 checkboxes on my selection-screen other two checkboxes should disable ( I mean not editable). Can anybody suggest how to do this. If possible ple
-
Problem in using MDB with Foregin Server
Hi, anyone can help me? I am currently using Weblogic 11g, 10.3.5, development edition locally in my desktop. My scenario is I have to using an MDB to monitor a queue in a Tibco EMS queue (lookup with LDAP server). I create a JMS Server, and a JMS mo
-
Context Sensitive authorization implement in 4.6C
Dear all, Is there any way to implement context sensitive authorization in 4.6C? Something like P_ORGINCON object in the newer version. I know the easiest way is to create two IDs for one user; one with each respective role/ structural authorization.
-
What hapenned to the MJPEG codec in Vision 2012 SP1?
NOTE: This discussion is about the 64 bit version of the Vision toolkit! NI has re-vamped its AVI functions in the latest Vision toolkit (2012 SP1). At first glance, the new AVI functions work fine. At least the 64 bit version now has a wider sele