System status blank for equipment - no changes allowed

Hi,
We want to dismantle an equipment as it is no longer at the customer's location.
When I go in IE02, I get following message.
"Change technical object" is not allowed (EQU 10051040 )
    Message no. BS002
Diagnosis
    The transaction 'Change technical object' is not allowed for  EQU
    10051040, because no status is set to permit it.
System Response
    You cannot carry out the transaction 'Change technical object'.
Procedure
    You can carry out this transaction if you set a user status, which
    permits 'Change technical object'.
I put the User Status on "Released", but still not possible to change the equipment.
When checking the System Status, I noticed that it is blank.
As no changes are allowed, I cannot manually change the System Status.
Also in IQ02 I get the same message and no System Status is filled.
Anyone an idea how to workaround so we can dismantle the equipment?
Thanks in advance for your inputs!
Best regards,
Geert

Pete,
Yes I have run that program, but it hasnt changed anything.  There is a user status AVLB in the equipment. When i checked in the status profile, this user status is not forbidden for any transactions. The program RISTEQ03 seems to work if there no user status also. But for my case, a user status is there, but there is no system status. Since there is no system status, the equipment could not be accessed through change mode (ie02).  I need the system status AVLB in the equipment.  The equipment does not even have any other details like functional location, maint. plant, sales area data, etc. in it.
Nazeer

Similar Messages

  • Status text for Equipment

    I am calling function
    CALL FUNCTION 'STATUS_READ'
    which returns a table of status for the equipment in the form 'E0001'.
    I want to get the text description of that status  such as 'ESTO' in order to compare with a value beign read from an input file
    Where can I find the textual description of the status
    J.J

    hi JJ,
    In Table <b>TJ02T</b> you can find the system status text table ...
    if it is answered please closed the thread by marking helpful answers else let us know for what you are looking for
    Regards,
    Santosh

  • System status ECUS in equipment

    Hi experts,
    I have a doubt:from standard when the system status in equipment is ECUS (BS22 I0188), for example after movement 601, do the stock informations in label 'Ser.data' must be update automatically by the system or not?i have not found reference in OSS or library
    Thanks in advance
    regards
    massimiliano

    Yes. The stock information in serial data tab will be updated automatically.
    For example..
    1) AVLB: serial data (equipment) exist but not stock yet
    It must be no stock information.
    2) ESTO: stock in warehouse of plant
    It must be stock information like plant, storage location, sales order, etc
    3) ECUS: stock at customer site (no stock in plant)
    It must be no stock information because sold already.
    Do you have any problem?
    Regards
    Luke

  • System Status Authorizations for Marketing Plans and Campaigns

    Hi Experts,
    We are using the Standard System Statuses on the Marketing Planner like the Created , Released, Approved, Finished, Locked and Rejected. My requirement is to limit the access to the Users for these Statuses. For Example :
    User 1 will have access to Created.
    User 2 will have access to Aproved.
    User 3 will have access to Aproved,Released, Create
    How do I set the Authorizations for the System status based on the User? I tried creating Authorization Keys under Status Profiles, but I am not clear on where to assign them.
    Please guide me.
    Thanks in Advance.

    Hi ,
    Thanks for your input. I am planning to go with your second option to go with assigning the Authorization objects at the Marketing Plan and also at the Campaign level . My only concern here is will we be able to assign status specific authorizations here ?
    The Authorization objects given are for change, create etc. There are no status specific authorization  objects mentioned.   My requirement is the person who creates the MP should have access to release it and only the approver should be able to see the approved status and change the status o approved.
    Do you suggest using Authorization keys and assigning them ?If so where do we define the restictions on the Authorization keys like
    Authorization Group 1 has authorization to Create , modify  a MP and can only   View / Change the  statuses to Create and Release.
    Authorization Group 2 has access to Modify and has access to change the  statuses to Aproved.
    Is there any way this can be achieved ? Please let me know if I am going in the right direction.
    Regards,
    Pooja

  • How to suppress the system status of an Equipment from display ?

    Hi,
    I am working with transaction IE02 and IE03 and would like to surpress the display of the system status on the transaction.
    I have checked config for screen groups and screen fields and have not been able to find a solution.
    any ideas are greatly appreciated.

    Hi Chaitanya,
      You should be able to hide those fields by creating a standard variant(If you want to hide those fields for everyone executing those transaction)  for the same transaction.
       Please have a look at transaction SHD0 to accomplish the same.
    Thanks
    Narasimhan

  • Extract System Status (BWSTSYS0)  for ZOPERATION_ATTR

    Hello.
    I have a requirement to extract some attributes for infoobject 0OPERATION. Since there is no 0OPERATION_ATTR object in the Business Content, I created my object with RSO2.
    My problem is that I have no mean of extracting the system status of the Operation. I tried using SAP Note 300300 but I don't see how I can populate the BWSTSYS0 element I included in my ZOPERATION_ATTR source.
    Any help highly appreciated.
    Best regards,
    Jean-Marie

    Perhaps you could include the field/table where this "system status" is in ECC.

  • PP-PI - System status LKD for a process order - how to set/unset it

    Hi gurus,
    I need some help.
    I have to lock / unlock process orders inside a program (not manually).
    I would like to do this without using Batch Inputs, which are not reliable.
    I know the function STATUS_CHANGE_INTERN can modify the order status; but I don't know if the result I get is the same I get doing manually: "Process order" --> "Functions" --> "Restrict processing" --> "Lock"/"Unlock".
    Can anybody help me?
    Thanks in advance.
    J.

    Hi
    I found this thread which is talking about Internal Order Status change and also a solution for the same.
    [Status change|http://forums.sdn.sap.com/thread.jspa?threadID=1516496]
    Br,
    Vijay V

  • System Status I0126 for Plant Maintenance orders

    We want toallow users to Cancel Orders. I have found the status code but it is not available for our PM orders. How can we activate the status and how will it affect purchase requsitions against the order?

    Hi,
    As you found there is no concept of a cancelled PM order.
    Before order release you can set a status NCMP/I0015 (not completed). That is set from IW32 with menu:
      Order - Functions - Complete - Do not execute
    That also automatically sets business closed (CLSD) status. This setting can not be revoked.
    -Paul

  • Business Transaction Control is not Working for Equipment Status.

    Hi All,
    I have created a Status Profile for Equipment / Functional Location & assigned 5 Status under this Profile i.e. NEW, COM (Commissioning), INS(Inservice), CAM (Care & Maintenance) & DCM (De Commissioned). For Status DCM i have assigned Transaction control FORBIDDEN for "Enter PM processing data , Enter PM planing data & Create Meas. Doc."activities.
    It Means, whenever user creates Plant Maintenance Order OR Notification, Maintenance Plan OR Maintenance Item & Measurement Document for any Equipment / FL having this user status (DCM), system should not allow creation of above mentioned object.
    In my scenario, system is giving an standard error message " The business transaction cannot be carried out" during creation of "Plant Maintenance Order OR Notification, Maintenance Plan OR Maintenance Item".
    But i am able to create measurement document for equipment / FL having user status DCM with Transaction control Forbidden of Measurement document creation. No error message displayed by the system.
    Can anybody tell me why its happening? Why system is giving error during order & plan creation but not for Creation of measurement document ?
    If this is not posible in standard SAP, does any body knows about any OSS note so that we can implement the same to get an error message.
    Thanks in advance
    Arun

    Please ensure whether both projects have the same budget profile. Other than that you need to carefully investigate how the cost was posted onto both projects in the first place. Please note in case of procurements, budget is only checked at the commitments level (search the forum as this has been discussed before).
    In case this does not resolve your issue, revert back with the budget profile settings.
    Regards,
    Ammar

  • Change names from ECR/ECO system status screen (cc01, cc02)

    Hi all,
    I’m working with ECM main screen (CC01, CC02…) and the names assigned in the Standard process are not meeting tour needs and some steps are missing in order to cover all the specifications.
    If in a easy way I could change the name of the system status steps ( for instance change “Convert ECR” into “Start modifications”) will be great and, if this change could be link to a type of ECR would be like a dream because this will meet all the client requirement.
    Any comment or suggestion in how to do that? User status are not valid :S
    Many thanks in advance
    Alberto

    Hi alberto,
    I think you can't change it from "Convert ECR" to "Start Modifications" but you can use create your own Statuses as required and can be control through Status Profile where in you define this. and in first screen of CC31 or CC01 you need to make this "Profile" Field as Mandatory.
    Change type can also be linked to Profile, this way your client requirement will be fulfiled.
    Hope this will solve the problem
    Regards
    Rehman

  • USEREXIT / BADI to get WBS elem system status before&after for WBS in CJ20N

    Hi friends,
    Please help me out to capture the WBS element system status after and before the changes  in CJ20N tcode, the status has to be posted to the P I system.
    Please let me know if any user exit exists for CJ20N.I am not able to find any in CMOD.
    I have tried using the BADI's WORKBREAKDOWN_UPDATE and
                                              PROJECTDEF_UPDATE  .
    but was not able to capture the changed system status .
    Is there any other way to capture the system status and post them to PI.
    Thanks and Regards,
    KC
    Edited by: Krishna Chaitanya  G on May 7, 2009 7:19 PM

    Hi Afzal,
    The User wants to get it posted to the PI system as soon as the system status of WBS element is changed.
    I am already done with RFC FM for this purpose which gets  the changed status of  all PROJECTS-WBS elements.
    Our team is facing some probs with connecting to PI through RFC.
    Getting  'SYSTEM_FAILURE' error, when executing the RFC with PI system's destination.Not able to trace out the probs, they have tested the connection with IDOC which was a success and able to post the PI.
    They want me to capture the data in USEREXIT/BADI and some how trigger the IDOC with back ground job scheduled.
    Thanks and Regards,
    Krishna Chaitanya G

  • How can we reset the   active system status  when we are trying to change

    Hello SAP,
    I am using the transaction  code 'CJ20N' .
    For this transaction code, I need to put one validation when user is trying to change the system status to 'TECO'.
    Once, user changed the system status  and trying to save , we need to put the previous system status.
    For e.g. : system status is 'REL'. Now user set to 'TECO' and CLICK on save button, system status  need to change 'REL'.
    Could you please explain me that how can we delete the buffer system status 'TECO' and reset to active status 'TECO '.
    Thanks and Regards
    Srini

    You can't delete an account, you can only stop using it.  If you're getting that error message you won't be able to create a new account on your device.  Your only options are to re-use one of the accounts previously created, or create a new account on a different iOS device or Mac (running OS X Lion or higher), if you have one.

  • EQUIPEMENT - User status and system status

    Hi freind,
    It would be great help if someone can brief me on  procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
    regards
    Pravin

    hi Pravin,
    Check this out
    <b>USER STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
    <b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
    <b>USER STATUS</b>/<b>SYSTEM STATUS</b>
    http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
    Regards,
    Santosh

  • How to find system status for production orders?

    How to find system status for production orders?
    looked into table AUFK, AFKO and AFVC but none of these tables, carry
    system status as part of the fields(STTXT)
    I tried to filter in COOIS, but not much help
    Able to find system status information in COHV,Is there any other way where
    I can find system status information for production orders
    Kindly guide

    Hi,
    Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
    But, it is very difficult to combine the details like Order and System status.
    Take the help of your ABAPer to generate Report for you.
    Regards,
    Siva

  • How to control the Business Processes of System Status in Proj. Def.?

    Dear Experts,
    When a Proj. Def. is in "Business Complete" System Status (CLSD), I would like to control no data is allowed to be changed, except undo the CLSD.
    In SPRO, I could onlly fine the similar setting in WBS status profile, but could not find system status profile for me to define and set which business processes is/are not allowed.
    Is there anyone know how to do so please?
    Thanks & regards,
    James Chan

    Dear Ivanna,
    Really thanks for your swift reply.
    In my system, when a Proj. Def. is in "CLSD" status, many of the fields are not grey-off for display only.
    Instead, most of the fields are allowed to change.
    In CJ20N, when I check on the "Transaction Analysis" of a project's status after "CLSD", I can see the "Create Change Document" is "Allowed".
    Is that the cause why most of the fields are allowed to change?
    How can I make it as "forbidden"?
    Thanks & regards,
    James Chan

Maybe you are looking for