System status change with delegated standard object

Hi everybody,
I delegated BUS2005 (production order) to ZBUS2005 and created a new event based upon the system status MANC (I0420). It works fine when I use my custom object ZBUS2005 in BSVZ and this event is successfully triggered. But when I change this object to the standard object BUS2005 in the same transaction BSVZ, the event is not triggered. BUS2005 has been already delegated to ZBUS2005.
Can somebody kindly tell me how this can be fixed? I want to see the standard object, BUS2005 in the trace, instead of my custom object.
Thanks,
Max

Thanks Nishant,
Well, I have created many events for other objects and delegated the objects.
In all these cases, I can see the standard objects in the trace, not the customized objects. But in these cases, I didnt go for status change management.
So, why dont I see the same standard object in the trace in this case of BUS2005? Even the setting in BAVZ has been done according to BUS2005, not ZBUS2005. So, I am expecting BUS2005 in the trace. Trace comes only when I change this BUS2005 to ZBUS2005 in BSVZ.
Please give your comments.
Thanks,
Max

Similar Messages

  • Exit for CJ20N where system status changes can be captured

    Hi Experts,
    I need exit for CJ20N where system status changes can be captured
    for both the below cases
    1) When WBS Element is having Networks inside it
    2) when WBS Element is having no networks inside it
    EXIT_SAPLCOBT_001  --->>>   ZXCO1U01  , will work for 1) , but not for 2)
    i want an exit where status change gets captured for both cases 1 and 2 and
    will do further processing according to client needs based on status change
    Need to trigger IDOC on status change of  WBS element.
    If WBS is having network inside it  , then network status changes also with WBS status change
    and IDOC should trigger for WBS also.
    I just want suitable exit  / place for coding . Rest i can do.
    if no suitable exit / BADI , then what is the best possible place where i can go for Implicit Enhancement
    Best Regards,
    Gaurav
    Edited by: TheGaurav on Oct 25, 2011 7:08 AM
    Edited by: TheGaurav on Oct 25, 2011 7:12 AM

    I am kind of stuck in a similar issue. I need to perform custom validations on standard fields which cannot be done through OPSI or OPUC transactions. 0007 or 0002 User exits seem to assist on custom field creations/validations. However, I do see people posting the following BADIs which may be useful.
    CO_SRULE_CHECK
    PROJECTDEF_UPDATE
    WORKBREAKDOWN_UPDATE (which you already tried)
    WBS_FIELDS_FOR_ASSET
    CO_SRULE_CDOC
    Let me know if any of these worked out...
    AN

  • Project definition system status change details

    Dear PS experts,
    Request, kindly let me know which report is available to show the system status change from
    crtd to rel
    rel to teco
    teco to clsd
    we would like to analyse which date or period the system status changed thru edit-status
    from crtd to rel
            rel to teco
            teco to clsd
    we don't use any user status.
    i have checked cn60 & all reports from cn41 to cn47, but i don't get any report states about the change details of system status.
    pl help
    srihari

    thanx,
    can u pl tell me about cn60 std report, does this use for system status change or any other purpose, pl let me what purpose this report is available for us.
    i wanted to know only the changes taken place in project definition with regard to crtd to rel or rel to teco or teco clsd, there should some report which will give this data without touching the tables.
    pl help
    regards
    Srihari

  • Project system : system status changes log?

    Dear PS experts,
    Kindly let me know where i can see the Project Definition ; system status changes done by users as & when required.
    CRTD to REL
    REL to TECO
    TECO to REL (cancel)
    so on
    I wud like when the project status - system status changed by user thru any log report?
    regards
    srihari

    Hi...
    why don't you try the following:
    in project builder CJ20N (project definition) use the I (informaton button) where the System/User status ism and then in the next screen use the menu Extras->Changed Documents ->All.
    Next screen press button history...
    (or even CN60 transaction)
    i hope it helps
    pan

  • System Status of newly added project objects for a RELEASED Project.

    Hi Experts
    During the course of execution of project, we may need to add new activities.
    However, as the project is released, the newly added activtity or project object attains REL status.
    How to ensure CRTD status for the newly created object so that can ensure subsequent release by Higher Authority.
    I think user status may be useful here but i do not know how to set. Please suggest feasible solution.
    Warm regards
    ramSiva

    Release status is PS pass on for PS  Objects. So,  Create two no. of Level one  WBS Element in your PS Structure. One for which you want release that structure you create under that WBS  and Second WBS don't Release and use the same leg for your created status structuring.
    And do not Release Project Definition, Let it be max. PREL only, Till your structuring process is over.
    I think User status cannot help you in this  case.  ( Because user status reside between the System Status )
    With Regards
    Nitin P.

  • Table for WBS status change with date

    Hi,
    Please assist me with a table name which should have WBS status with date on which statis was changed.
    Thanks,
    Manish.

    Hi
    You can use program (SE38) RBSVCDOC to track these changes. Else go manually in CJ20N to track these status changes.
    Use JCDS and JEST table for any other reporting on it.
    *Kindly mark your thread once your query is resolved.*
    Regards
    Saurabh

  • System status change of WBS element

    Hi everyone,
    We need to change system status of WBS element programmatically.
    So can anybody suggest me which function module can I use?
    Thanks & Regards,
    Anirban

    system stauts is set when some function is executed e.g.
    REL is set when WBS is set to REL - CJ20N edit->status-> release
    SETC ise set when settlement rule on WBS is creaed
    BUDG is set when you carry out budgeting via txn CJ30
    so it depends on what system status you want set, then execute the following business transaction manually or via program/ development.
    However for setting REL or TECO you might be able to use some function modules
    For WBS elements I would check out the following
    CNIF_STATUS_2054               Set/Read Status for BUS2054                                     
    BAPI_BUS2054_GET_STATUS        Read Status for BUS2054 (Work Breakdown Structure)              
    BAPI_BUS2054_SET_STATUS        Set/Reset Status for BUS2054 (Work Breakdown Structure)         
    CNIF_STATUS_2054_CANC_AALK                                                                     
    CNIF_STATUS_2054_CANC_CLSD                                                                     
    CNIF_STATUS_2054_CANC_DLFL                                                                     
    CNIF_STATUS_2054_CANC_LKD                                                                      
    CNIF_STATUS_2054_CANC_MDLK                                                                     
    CNIF_STATUS_2054_CANC_TECO                                                                     
    CNIF_STATUS_2054_CANC_USER                                                                     
    CNIF_STATUS_2054_SET_AALK                                                                      
    CNIF_STATUS_2054_SET_CLSD                                                                      
    CNIF_STATUS_2054_SET_DLFL                                                                      
    CNIF_STATUS_2054_SET_LKD                                                                       
    CNIF_STATUS_2054_SET_MDLK                                                                      
    CNIF_STATUS_2054_SET_REL                                                                       
    CNIF_STATUS_2054_SET_TECO                                                                      
    CNIF_STATUS_2054_SET_USER

  • System Status Change for Project Definition

    Hi,
    I am working on a requirement to notify the Project Manager when the Project Status changes to REL.
    I couldn't find any user exits where I can add the code to send an e-mail notification at the time of status change of the Project Definition or the WBS elements within the Project.
    I checked for events in Business Objects BUS2054(WBS) and BUS2001(ProjectDefinition) which might get triggered at the time of status change. I couldn't find any events relevant to Status Change.
    Any ideas how to handle this requirement ?
    Regards
    Bhooma

    I found a solution to this issue.
    Regards
    Bhoooma

  • Batch status change with UD

    Hi Everybody,
    I have a question about batch status change while taking UD. I understand that stock posting and batch status for each UD code is decided by the value in 'Posting proposal UD' field in Selected Set settings. I understand that I can customize the movement types for the values (eg VMENGE01, VMENGE02 etc) in config. But that is only for stock posting. From what setting is the Batch status decided eg. If we approve, the batch is unrestricted and if we reject it is restricted.
    Can I customize those values which are available in the drop down in the 'Posting proposal UD' ? Can I create a value of my own ?
    Regards,
    Manish Saraswat

    Manish,
    execute tcode QS51
    you will be able to see 'Posting Proposal UD' in "Selected Set ". Now select that line (Posting Proposal UD line). Status for Posting Proposal UD should be "Released"
    After selecting that line on left hand side there is " Dialog Structure " in that there is " Selected Set Code " Click on that.
    Complete list of code will come you can add and modify those codes.
    Hope now its clear to you.
    Edited by: tejasg on Mar 24, 2010 4:21 PM

  • Customized Pf Status along with the standard Pf status

    Hi all
    I have created an ALV report and has its default pf status which includes all function like sum ,sort, export, variants save etc.
    I have a requirement to have an extra push button along with this PF status.
    I have created a pf status with this button.. and activated and called in REUSE_ALV_GRID_DISPLAY and did everything..
    But in my output, only my customised pf status is displayed ie only the push button is displayed and all other standard functions are gone..
    Can anyone help me to solve this problem.
    Ie I want one push button along with the standrad pf status in ALV report using REUSE_ALV_GRID_DISPLAY .
    Cheers
    Christina

    Hi All
    Creation of new button in output refer below document and screen
    if you want to add one more button in the Red line like below.
    Reffer Below steps after that you can create or change STANDARD Gui in the program .
    Go to Se41 give details like below.
    Select Copy Status button in up. As shown below screen.
    You will get below screen. Provide your custom program name.
    Like below screen. Click on Copy.
    You will get below screen click on copy button.
    You will get below status.
    Click on Activate like as shown in below.
    Click on OK button you will get it in your program.

  • Status Change with Compulsory Original File Attachment

    Hi,
    We have created a document with 3 statuses (Created, Acknowledged, Released).
    DIR will be created with "Created" status.
    When the status will change to u201CAcknowledgedu201D system should check whether the DIR has a original file checked in. i.e. Changing status should be have mandatory condition of original is attached.
    Same for the transition from "Acknowledged" to "Released"
    How to do this?
    Thanks & Regards,
    Pavan

    Hi Pradeep,
    Does the status type help?
    Also does the BAdi suggested can be used only for the single document type or will be across all the document types?
    regards,
    Pavan

  • IM: system status change on wbs

    dear all,
    how can I set status Clsd: closed in a wbs element?
    it can be changed automatically or it is changed only automatically?
    when the status of wbs becomes as CLSD? after what kind of operation?
    thank a lot
    V.

    thnak you so much..
    I follow your instuction but I can't close it.
    I have this error:
    You cannot deactive asset 21 0.  (Please check.)
    Message no. AY109
    Diagnosis
    The asset 21 0 in company code US11 cannot be deactivated. Values exist for the asset.
    You probably tried to give an order or a WBS element the status "Close", or to set a deletion flag.  However, since the order or WBS element is a capital investment measure, you first have to credit (clear) the accompanying asset under construction 21 0.
    System Response
    The function cannot be carried out.
    Procedure
    First, completely settle the order or the WBS element.  In addition, carry out a full settlement, in order to clear the asset under construction.  Then you can carry out the desired function.
    can you help me with this?
    thank you so much
    V.

  • I ordered my iphone 6  8 days ago and I have noticed that there is no status change with it, the order is still "processing". I'm very frustrated and would like to know how much longer it will be "processing".

    I have heard of people ordering their iphone 6's and having them shipped out in the next day. I understand demand is extremely high but I don't understand why it has to take this long for my order to be fulfilled.

        mattminsch, I know that you're excited to get your new device and we are too. The demand for these devices would most certainly be high and depending on the model that was purchased. Currently for the time frame that was mentioned the ship date would be 10/31 for most models. Once the device has been set to ship only then would you see the order change from processing to shipped. Do you remember what model you purchased?
    AdamG_VZW
    Follow us on Twitter @VZWSupport.

  • WBS element System status change

    Hi,
    Can any one tell me the process to change the WBS element from TECO RESA to REL.
    Thanks

    could find the answer

  • Report to check the WBS "system status"

    Hello friends,
    Would anyone know for a standard report where I can check for the WBS "system status"?
    i.e.: I want to know everything I have in AVAC status
    Thanks and Regards
    Alex

    You can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
    System will display you user / system status for all the PS Objects.
    With Regards
    Nitin P.

Maybe you are looking for