System status CLSD is active , Message no. BS013
Hi Experts,
One of our users got below error message when they run Dep. the order is a PM order. PM user has created and due to some reason they have not processed and later it has been closed. This order does not have any actual postings or any settlement rule as well. This error seems to be very illogical and unusual.
User has tried to activate status closed but that function is not active.
System status CLSD is active (ORD XXXXX)
Message no. BS013
Diagnosis
Object ORD XXXXXX has system status CLSD (Closed). According to this status, transaction 'FI: Postings' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Pls. Help in resolving.
Best Regards,
Aziz
Hi Aziz,
It looks like the order was closed - status CLSD active.
You need to revoke status "Closed" before you can post to it.
To revoke CLSD in IW32 in menu:
Order --> Functions -> Complete -> Cancel business completion
Regards,
Szymon
Similar Messages
-
MR11 error message system status CLSD is active
MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .
If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status. -
System status CLSD is active (ORD 4000111)
Hi Guru,
I tried to execute MIRO transaction however I encountered the error "System status CLSD is active (ORD 4000111)"
Diagnosis
Object ORD 4000111 has system status CLSD(Closed). According to this status, transaction
incoming invoice" is not allowed.
Procedure
You can only carry the requested function if this is allowed according to the status of the object.
Please advise me how to correct the error.
Thanks,
MemarslonHi Guru,
Thank you, Here we encounter an error related to closed order when using MIRO.Could you pls help to check how to revoke closed status.
Thanks,
Memarslon -
Hi,
I tried to execute MIRO transaction however I encountered the error "System status CLSD is active (WBS C-0028747-01-01)
Diagnosis
Object WBS C-0028747-01-01 has system status CLSD(Closed). According to this status, transaction incoming invoice" is not allowed.
Procedure
You can only carry the requested function if this is allowed according to the status of the object.
Please advise me how to correct the errorHi,
Open the WBS in CJ20N tcode and undo status CLSD by selecting Edit>Status>Closed>Undo. Then save WBS and try MIRO. In CLSD status no transactions are permitted hence you are getting the error.
Regards
Shrikant -
System status REL is active , Message no. BS013,CO88 COST-BY-SALES-ORDER
Hi Experts,
I meet error when i do the production order settlement"CO88" ,
Which the production mode is cost-by-sales-order undifferentiated mode.
the error information as bellow:
System status REL is active (ORD XXXXX)
Message no. BS013
Diagnosis
Object ORD XXXXXX has system status REL (Released). According to this status, transaction 'settelemtn' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Pls. Help in resolving.
Best Regards,Dear Szymon and Mukthar,
Fisrtly,Thank you for your help!
I have changed the status "TECO"(the status is "TECO PCNF DLV PRC GMPS MANC SETC"),then I settlement the production order.
The system still error:
"Debit from actual settlement" not allowed (Sys. status REL, object VB0000000015000010)
Message no. BS051
Diagnosis
The status check for the status object VB0000000015000010 indicated that the procedure "Debit from actual settlement" cannot be performed because Sys. status REL forbids it.
System Response
Procedure "Debit from actual settlement" is not performed.
Procedure
If procedure "Debit from actual settlement" is to be performed, the Sys. status REL of object VB0000000015000010 must be reset.
Other statuses than Sys. status REL can also prevent the procedure. This message does not tell you all statuses which currently prevent procedure "Debit from actual settlement".
Regards!
Gang.Tian
remark:
I use the MTO mode, the receiver of settlement is SALES ORDER.(the settlement rule is SDI) -
Hi, I'm trying to make a GR/SE for a PO. The system then give me three messages:
- System status CLSD is active (ORD xxxxxxx)
- No approval workflow found. Inform system administrator
- System status INCM is active (confirmation xxxx)
The INCM message I guess is that the order is incomplete? Anyone got a input on this? Is there any good transaction (not bbp_pd, to problem solve users SC and PO:s if your not in PPOMA_BBP).
BR JohanHi,
You can check in the transactions RZ20/SLG1 for errors.
Also,the error "No approval workflow found. Inform system administrator" is because more than 1 Wf is active for object "BUS2209".
For the system messages ,see if the foll notes help:
894688
654367
BR,
Disha.
Pls reward points for helpful answers. -
System status WCRE is active (ACT #2)
dEAR SIR
When iam doing production order creation by co01 iam geting error as shown below
System status WCRE is active (ACT #2)
Message no. BS013
Diagnosis
Object ACT #2 has system status WCRE (Work center until release). According to this status, transaction 'Release operation' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
pl give solution
regards
BaswarjDear,
WCRE - Indicates Workcenter Until Release.
Please check the status of you work center CR02 it should not be locked or active for deletion flag also the usage as 009. Also check the setting of OP45.
Go to BS22 transaction for "I0270 - WCRE Work center until release" double click and for release make it allow.
Refer this thread,
prod.prder system status
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 11, 2010 1:54 PM -
We are using SRM 5.0-Extended classic scenario. The Purchase order which was created and replicated to the backend R/3 system . But now the *status changed to *"Transaction complete " status and if am going to change the PO am getting pop-up message as "System status CMPL is active".
Is any way to change the PO status ? Or any other function module is available , I have tried function module
BBP_PD_PO_STATUS_CHANGE. But am getting the same status.
Kindly adviceHi,
Its great that you were able to solve the problem. May be you dint specify the required keywords for this thread to appear. Its always a good habit to search the forum before posting the question. We really appreciate that here in SDN.
P.S: I dint have any hand in restricting that thread from appearing in the search list
Thanks,
Pradeep -
Change PO--error "System status ITRE is active".
Hi,
When I am trying to release a PO manually i am getting one error message "Error changing to status RELP, System status CMPL is active" in transaction code SWO1.
Thanks,Hello,
ITRE status means: In Transfer to Execution Syst.
Reprocess the PO using BBP_PD_PO_TRANSFER_EXEC.
Helpful Note: 1090580
Hope this helps.
Thanks
Ashutosh -
Hi all, I am working in SRM 4.0 and when I try to do a confirmation, the system throws this message:
System status INCM is active
Transaction CO Through-postings from FI has been locked
I check all periods in FI, CO and MM and all are OK.
What can be happened?
Thanks in advance
RosaSorry! the problem was solved, there is a period in CO that have problems and it was locked....
Sorry about this
ROsa -
System status TECO is active (ORD 1001020)
Dear All,
System status TECO is active (ORD 1001020).
Thanks
paragParag,
I don't seem to be able to find a question in your post.
You can set/unset TECO status in transaction CO02. Ignore any warning message concerning change. Then, Functions>Restrict Processing>'Technically complete' or 'revoke technical completion'. Save
Rgds,
DB49 -
"System status AALK is active" and "System status LKD is active" errors
Hi,
We are on SRM 4.0. When creating a shopping cart from a specific catalog the user is receiving two error messages.
"System status AALK is active" and "System status LKD is active"
How do I resolve these errors?It's more like a CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.
-
Hi gurus,
My client wants to process a Purch order from a Preq. But when he wants to save his PO, he got this error message : SYSTEM STATUS LKD IS ACTIVE (ORD 9XXXXXXX).
Please advice
regards
Edited by: Patrick Konan-Messou on Apr 10, 2008 3:54 PMIt also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.
-
System Status LKd is Active( Ord 4257568)
Hi,
I am doing dsettlement of an PM order with transaction KO8G, but by one order I get an error message " System Status LKd is Active( Ord 4257568)
How to tackle this?
Thansk
Br,
akkshayaIt also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.
-
Getting Error Msg " System Status INCM is active (confirmation 7300012896)"
Hi ,
Whlie confirming Goods in "Confirm Goods/ Services" user is getting Error " System Status INCM is active ( confirmation 7300012896)
Can you please tell how to rectify this error message and confirm goods against PO.
Regards,
Avdhutcheck - click before doing confirmation
there many other error message thrown at bottom side
any user locked of for network / PM order order in the PO
some message will be thrown
share taht message for more help.
Muthu
Maybe you are looking for
-
ICal for iPhone-Why is there no custom option for repeating events?
I really hate the application iCal on the iPhone, because it won't allow me to enter in an event that happens on the fourth thursday of the month. Palm has allowed users to make monthly reapeats by day and by date for ten years now. Why can't iCal do
-
Can I use "dvt" function for customizing the chart format in OBIEE 11g?
Hi, ".pcxml" file cannot be found in OBIEE11g. However, can I use "dvt" function for customization? If yes, how? Reference for dvt function: http://docs.oracle.com/cd/E23943_01/apirefs.1111/e12418/tagdoc/dvt_pieGraph.html
-
Bought and Paid but Didn't download
I paid $15 for one of the nike + ipod workouts and only half of it downloaded and now it won't let me download the rest unless I pay for it again, bringing that to a grand total of $30 and the songs I did download I can't listen to because it says th
-
Display CRM 2013 Dashboard in SharePoint 2010 Page Viewer web part
Hello, I am trying to add a simple CRM 2013 dashboard to a SharePoint 2010 web page (Page Viewer web part). The page shows the banner only - the dark blue banner from CRM, but that is it. No data, no headers, etc. Is this a permissions issue? The
-
JDBC Adapter / Acknowledgements
Hello all My scenario is the following : IDOC > XI > Oracle database. I want to update a table. As I use UPDATE_INSERT actions on database, I think there can't be errors if database is reached by adapter. So I decided to use an asynchronous interface