System status for capacity availability in Process order
Hi,
I have activated the capacity availability check in SPRO to have a capacity check while process order creation.
But system doesnt provide any status in the process order for this. No status is appearing even if I do a manual capacity check in process order.
Is there any system status for capacity is available?.
Thanks in advance
Prathib
Hi Prathib
System will be give any status if capcity is available, but it will give a status MSCP if there is Capacity shortage.
Rgds
UK
Similar Messages
-
System status for goods issue to the order (ISSD)
Hi All,
In BS22 we can see the system status for GI as ISSD. How to enable this status in the production order.
In BS42 we can assign this system status to the selection profile.
But how to assign this status profile to the order/order type?
Edited by: pp_srijit on Jun 9, 2010 2:24 PMHi Srijit,
You can assign this status profile to the order Type in Transaction OPJH in case of production order and in CORN in case of process order under the tab "Status management".
Hope it helps.
Regards,
Kaushik -
System status for IDOC creation and processing for production orders
All
I am creating IDOCs for production orders to send requirements to an external WM system for kitting execution.
I need to know whether there are any system statuses to notify me when an IDOC has been created,failed and processed. If not, how do I go about creating user defined statuses for these statuses.
Second question, which idocs should I use to confirm, teco and cancel the production orders from an external system?
Thanks
EvanHI Evan
u can use the standard program - RBDMOIND scheduled in back ground to update the Idoc staus ,
this helps to update the IDoc Status from
'03 Data passed to port OK ' to
'12 Dispatch OK'
status 03 indicates the IDoc is successfully transmitted to Communication Layer and the Status 12 helps to confirm the data dispatch to the receiving port. -
System status LKD REL for operation & phases in Process order
Hi Gurus,
We have a process order in which system status for operations & phases is LKD REL due to which user is not able to confirm the process order. The status of process order is REL PRC APNG APRS BASC BCRQ GMPS MACM RESA SETC. One of the user from planning has set the status to LKD due to some artwork changes. Now another user set the status to unlock. Locked status from order status was reset but at operation & phases level the status is still LKD REL & hence order confirmation is not allowed.
I try to again set the status to lock but i am getting message system status LKD is active (ACT 40547870 0010) which is similar to one which we get during order confirmation.Pls. suggest.
Regards
AmitHello Amit
If the status LKD is not set for the order header, this is possibly an inconsistency.
Please open an OSS incident to SAP for further analysis.
BR
Caetano -
System status for Internal order
Dear SAP gurus,
I want to automate the system status for Internal order that at the time of Final billing of invoice , the Internal order should be closed automatically.
Is there any setting to do this.
Thanks,Automatic option is not available. you need to customise for automisation purpose.
you can do teco complete by changing the internal order. for the bulk you write LSMW or SCATT.
thanks
ANJI -
How to find system status for production orders?
How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guideHi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva -
Control recipe destination not available in Process order
Hi PP-PI Gurus,
When i am sending the process maessages to destinations,i am getting the error"No control receipe destination available in process order".
When we create master recipe using X-steps, there is no option to enter comtrol recipe destination. Infact we asssign the destination in X-step tree.
When the control recipe is created for a process order using x-steps, the operations overview will not have the control recipe destination.
When the status of the control recipe is sent to destination(PI02),the system throws the above error.
Any help on how to resolve this error.
Thanks in advance.
ManiHi Dhavel,
Whether it is PI_CRST or PI_CRST2 i am getting the same error message.
When i am working with Conventional Characterestics based process instructions in my recipe, everything is working fine.
When i use X-steps instead of process instructions in master recipe to create the control recipe, i am facing this error.
So it is clear that , when we are using Execution steps(X-steps) to create PI sheet,there needs some extra settings.
Any body working with X-steps in process order ,request your help please to resolve this issue.
Mani. -
User exit for Previous and current system status for 5 transactions
Hi Experts
My Objective to capture the Previous and current status of system status for 5 transactions in their user exits .
Description Business Object Transaction
Production Order operations BUS2005 CO02 to edit Production Order
Maintenance Orders BUS2007A IW32 to edit Plant Maintenance Order
INTernal ORDER BUS2075 KO02 to edit Internal Order
WorkBreakdownStruct BUS2054 CJ02 To edit the WBS element
Project System Network BUS2002 CN22 to edit Network
Activities Network
For Both Production order and Project System Network Activities Network ,
i got User exit " EXIT_SAPLCOBT_001 "
But i am not sure whether we can use this or not for our purpose . When i am changing status and then saving , my break point comes to EXIT_SAPLCOBT_001 .
But can we capture JEST or JCDS related data in that user exit or How can we capture both Previous status and Current ( Means New changed status ) . For eg From Released to Technically complete etc.
I want Status changed and its immedtiate previous status.
Do i need to check Exit or BADI before and after Saving .
Thanks
Regards
Gaurav
Edited by: TheGaurav on Sep 8, 2011 10:28 AMHi Himanshu
Many Thanks for the reply .
I also had some other processing needs to be done on the basis of those status. .
So do you have any idea or how to find what all exits or BADIs i can use for all of these 5 transactions , where
i can get data for JCDS ( or JEST ) .
CO02 to edit Production Order
IW32 to edit Plant Maintenance Order
KO02 to edit Internal Order
CJ02 To edit the WBS element
CN22 to edit Network
can we use EXIT_SAPLCOBT_001 for CO02 and CN22 .
Edited by: TheGaurav on Sep 8, 2011 1:21 PM -
Valid System Status for Floc or Equip
Hi all,
I am finding my way to find all the valid system status for Func Location and Equipment; hope someone can give me an answer to it :). When I go to tcode BS23, I can see all the system status are there.
However, how do I know which one are valid for Equipment for example. I know that AVLB, INST, INAC, DLFL are available as I commonly seen it. But how about the rest of the system status that can be attached to Equipment?
Regards,
effie7amHi NPB,
That is how we define the initial system status for that object. I have tried to go to the object types in BS23 and then choose the object then: go to >> object type info.
However, for equipment it is only given AVLB which is for me is not right. But for functional location and maintenance order, it seem showing all the necessary system status that are available in there.
Anyhow, that for giving me some idea on hor to dig into it.
Regards,
effie7am -
Cost Analysis Report - For a range of process orders
Dear all,
Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
Thanks
NagarajanDear
You can use cost analysis report like
1.S_ALR_87099932 - Variances Between Costing Runs
2.S_ALR_87099931 - Price vs Cost Estimate
3.S_ALR_87099932 - Variances Between Costing Runs
5.KOC4
Regards
JH -
Batch determination for raw materials in process order
I have defined a sort rule, batch search strategy and assiigned this strategy to process order type.classification for batch is also defined with charecterstic mentioned in sort rule.But when i am doing BD for raw materials in Process order , it is barnching into some other screen saying, no selection criteria and no strategy info defined. what are the necessary settings to make BD possible for all the materials having batch management.
Hi
Config Setting In Batch Management
This will help you for config setting:
Logistics general - Batch Management
1.1. Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
1.2. Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
1.3. Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements Transaction
1.4. Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics Transaction
1.5. Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
1.6. Batch Determination u2013 Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
1.7. Batch Determination u2013 Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
1.8. Batch Determination u2013 Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
1.9. Batch Determination u2013 Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
1.10. Batch Determination u2013 Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
1.11. Batch Determination u2013 Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
1.12. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
1.13. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
1.14. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
1.15. Batch Determination u2013 Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
1.16. Batch Determination u2013 Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
1.17. Batch Determination u2013 Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
1.18. Batch Determination u2013 Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
1.19. Batch Determination u2013 Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
1.20. Batch Determination u2013 Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
1.21. Batch Determination u2013 Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB
regards
Faisal -
Setting System Status for CRM Contract
Hi
I need urgent help for changing the system status in CRMD_ORDER, once the Contract is saved.
I tried to use the Function Module CRM_ORDER_MAINTAIN for setting the status. But this FM provides status change on user level.
Please guide me how to set the system status for this scenario.
Thanks in advanceHi.
Try using CRM_ORDER_CHANGE_STATUS to change the system status.
Regards,
Timo. -
Changing the System status for previous transactions
Hello,
Could some body help me with this ?
I have a User status profile with user status ABC which triggers system status Inprocess. This is applicable for all the new transactions for which we set the status ABC which works fine. But we have some previous transactions ( Prior to this config ) with status ABC , but system status is not Inprocess.
How can we change the system statuses for all these transactions? do we have a report for this?
Best Regards,Hi,
You can use 'STATUS_CHANGE_INTERN' FM to change the system status. Pass Object number and status ID as inputs to the Function Module.
Regards,
Lakshmi.Y -
PPRT (part printed) System Status for process order
Hi All,
Please help to explain when we get PPRT (Part Printed) and PRT (Printed) System Status on a process order. We are using 4.6 system.
We are printing the shop floor using COPI t-code and system is assigning PRT status for most of the orders. But for some of the orders when it is "Reprint" after couple of time it getting "PPRT" system status.
SAP system still considers the orders with PPRT in the "Original Printout" scenario instead of considering it in "Reprint" scenario.
Please can anyone help to clarify when and why does it happen.
Regards,
SwapnilHi,
There are 28 OSS Notes available to address this problem.
Explore with reference to your SAP Version.
Regards,
Siva -
I want all system status for all process orders in COR3
Hi All,
I have small requirement below:
In COR3 tcode after we enter Process order as input, in that screen we can see in 3rd row, System Status and User Status,
Where all these system status and User Status are stored,
How we will get these msgs?
Please help me on this....
SriNow i have verified in productin box, i am getting more than one STATUS in JEST for OBJNR , with this value i am getting more than one values, but here i am facing again one more issue:
in T02JT table i am getting some set of status(in table i am getting 10 values) but when i have verifed in COR3 tcode for that particuler order i am able to see only 8 system status...what about remain 2 ?
in T02JT table i tried all options as i put X for status with out X, i tried all options..
Please help me on this...
One more this is i need User Status's also...? how we can will get these values also..
Sri
Maybe you are looking for
-
Good Evening! A few days ago my IPad air was working perfectly as always. In the evening I went home and when I opened the cover to swith it on I realised it doesn't work. I tried to energize the battery but got no response. I tried to make a hard re
-
Cancellation of Transfer Order for Grouped Deliveries (Outbound) -Urgent!
Hi SAP Experts, One of our users created a group for several outbound deliveries. Now the user decided to cancel one of the deliveries for administrative reasons. He cannot cancel the delivery since a transfer order has been created. How can we cance
-
E-mail XML attachment has error. Invalid at the top level of top
Hi All, Error : Invalid at the top level of the document. Error processing resource 'file:///C:/Documents and Settings <?xml version="1.0";?> Report program generates a XML file (l_xml_table ) using cl_ixml . class cl_ixml definition load.
-
HT4527 My Home Sharing isn't working.
Both of my computers are authorized and online, but the Home Sharing tab still doesn't show up. How can I fix this?
-
Hi, I have got two clocks that are running, i want that only 1 runs at a time. And that they can switch with a method called wisselKlok(). So if 1 clock is running the other one is paused this is my code: (clock 1 is running, clock 2 is pauzed at the