System status in equipment master
Hello all,
In the equipment master the system status is showing ESTO HUAS SLOR. Is this correct? The material with this serial number is in stock - so ESTO i s valid. But it is not assigned to any sales order (Cross checked table EQBS)...What makes this combination work (System status).
Also, in the action log it says previously it was assigned to sales order but now its in inventory. How to correct this. Please help.
Thanks
RJS
Hi,
Please clarify that after assigning to sales order have you performed return delivery? Because of this might the link between ESTO and sales order is not there. To assign the ESTO to sales order as EDEL go to the trx BS22, search the status EDEL. Then , you double-click on short text, Search operation PMS8 and set flag "enable" o "warning". Whit this setting, You can post a delivery whit status ESTO EDEL. Hope it works. Thanking you.
Similar Messages
-
Change system status in Product Master - Urgent
Hi,
How to change the Sales Status in Product Master for the products which has been downloaded from R/3 to CRM?
Sales Status field is appearing in Gray colour and it is not allowing for changes of the status?
It is urgent.
Thanks in advanceHello,
When you download a product from R/3 to CRM, R/3 remains the 'master' for your product. Since there is no two-way synchronization of products between R/3 and CRM you should change that field in R/3 and perform a new initial load.
This is only true for R/3 related fields, CRM specific fields (like links with accessoiries, related products....) are always changeable in CRM since they do not occur in R/3. This mechanism is to protect desynchonization of your product master in a distributed environment.
Hope this helps,
Reward points if useful!
Regards,
Joost -
Set system status of equipment according to movement type
Hi guys,
I hope someone can help me.
I created two new movement types 943 and 944 as copy of standard 343 and 344.
I'd like to set the equipment status to ELOK if equipment is moved via 344 and delete the status after moving with 343.
I created two new business procedures ZSUH (for 944) and ZSUS (for 943) and did the necessary settings in BS12/BS22/BS32 I think.
If I now do the movement, the status of the equipment isn't changed.
If I manipulate the standard business procedure PMSU to set status ELOK, it's working.
What did I wrong that my newly created one don't work?
Thank you for any help!
Regards,
Florianhas anyone a suggestion?
-
System status blank for equipment - no changes allowed
Hi,
We want to dismantle an equipment as it is no longer at the customer's location.
When I go in IE02, I get following message.
"Change technical object" is not allowed (EQU 10051040 )
Message no. BS002
Diagnosis
The transaction 'Change technical object' is not allowed for EQU
10051040, because no status is set to permit it.
System Response
You cannot carry out the transaction 'Change technical object'.
Procedure
You can carry out this transaction if you set a user status, which
permits 'Change technical object'.
I put the User Status on "Released", but still not possible to change the equipment.
When checking the System Status, I noticed that it is blank.
As no changes are allowed, I cannot manually change the System Status.
Also in IQ02 I get the same message and no System Status is filled.
Anyone an idea how to workaround so we can dismantle the equipment?
Thanks in advance for your inputs!
Best regards,
GeertPete,
Yes I have run that program, but it hasnt changed anything. There is a user status AVLB in the equipment. When i checked in the status profile, this user status is not forbidden for any transactions. The program RISTEQ03 seems to work if there no user status also. But for my case, a user status is there, but there is no system status. Since there is no system status, the equipment could not be accessed through change mode (ie02). I need the system status AVLB in the equipment. The equipment does not even have any other details like functional location, maint. plant, sales area data, etc. in it.
Nazeer -
System status ECUS in equipment
Hi experts,
I have a doubt:from standard when the system status in equipment is ECUS (BS22 I0188), for example after movement 601, do the stock informations in label 'Ser.data' must be update automatically by the system or not?i have not found reference in OSS or library
Thanks in advance
regards
massimilianoYes. The stock information in serial data tab will be updated automatically.
For example..
1) AVLB: serial data (equipment) exist but not stock yet
It must be no stock information.
2) ESTO: stock in warehouse of plant
It must be stock information like plant, storage location, sales order, etc
3) ECUS: stock at customer site (no stock in plant)
It must be no stock information because sold already.
Do you have any problem?
Regards
Luke -
Usage decision follow up action change of status in equipment
Hello every one, I am having calibration scenerio in my project. All process is running properly but the issue which i am having is that when i am giving usage decision i should get a pop up to change the status of the equipment which is not coming in my case. i have checked followup action whch PM_QM there i have activated 2 Funtion modules one is for automatic TECO of order which is working properly and second is change to status in equipment master which is not working for me. Kindly give some guidance to me on same.
Regards
AbhishekHelloo,
Please let me know the equipment type you are using.
If you are using equipment type other than Q then u may get such type of issues.
Please try out with equipmetn type Q or P
Thanks -
System status field table name
Dear all,
I required help from all of you for finding the table name for system status of equipment
Thanks
RaghavHi,
JEST - Individual Object Status
JCDS - Change Documents for System/User Statuses (Table JEST)
TJ02T - System status texts
TJ30T - Texts for User Status
To access jest/jcds use EQUI-OBJNR.
Regards,
Maria João Rocha -
hi all,
I want to chang the equipment system status to equipment at custome site, how to do this please guide me,
thanks
Amit ranjanhi,
check these transactions.
IA02 Change Equipment Task List
IB02 Change Equipment BOM
IB05 Change Equipment BOM Group
IB08 Change Equipment BOM - Plant Alloc.
IE02 Change Equipment
IE05 Change Equipment
IE06 Change Equipment
reward points if hlpful. -
System status and configuration tab in equipment master.
Hi,
Will some one expalin following points.
1.Can we add / modify system status in configuration.-if yes path for the same.
2.Is system status linked to user status-if yes path for the same.If no on whhich basic system status is changed .
3.What is use of configuration data tab in equipment master.Is this required for creating work order,notification ,task list etc.Is their any link between equipment master and material master.
Thanks & Regards
VinayVinay,
1. Yes you can add modify system status using transaction BS22. However these are system delivered functionality and its not advisable to change these.
2.Its the other way around. User status can be linked to system status through the configuration for user status.Double lick on the user status definition to reach the system status dependencies editor in transaction OIBS.
3. Equipment master and material master can be linked either through serial number functionality (Material number + serial number = Equipment number) or through the "Construct" field(Structure tab) in the equipment master. The configuration data tab is used to link equipment master to a pre-existing variant of material. [Sap Help|http://help.sap.com/erp2005_ehp_04_sp/helpdata/en/01/d5454a4ab311d189740000e8322d00/frameset.htm]
Regards
Narasimhan -
Equipment master : user status
Hi,
Where do I get to see USER STATUS of an equipment master.
Regards
nandiniHi,
When you open equipment master on the header below description you have status available. There you will find a symbol i in Blue color, when you select this icon it will take you to another screen where on left side you can see System status and right side you can see the User status.
You can assign the user status profile to the equipment category level. or if any user status profile's are declared for equipment relavent in configuration then you can select the same by going to the screen as mentioned above.
Hope it's helpful.
Regards,
N.Nagaraju -
Movement Type 122 and Equipment Master status
Using Movement type 102 (Reversal Goods Receipt) the Equipment master status is reset to
AVLB and the stock batch is deleted.
However movement type 122 (Return Delivery to Vendor) does not do this.
Is there anyway to modify movement type 122 so that it works like 102 ?
Regards.
Phil.If it is a Return to vendor - 122 movement type transaction, the reason for the movement is that the equipment is defective or some issues are there and that is the reason it has been returned. Given 122 movement type is designed to reflect such a business scenario, how you are expecting that this should result in Equipment status to become AVLB.
So the question is why are you posting 122 if it is not real return due some defect ? -
Config User Status to the Equipment Master User Status
All,
I created a user status profile and assigned the same user profile to a sales order item category and also an equipment master. I was hoping that when I created my sales order and selected a user status and then saved the order and also delivered and PGId the delivery. I was hoping since it's the same user status profile that my equipment master would get updated automatically but it didn't. Is there anyway to do this that anyone knows of without using a user exit? Thanks for any help in advance.Hi,
For single equipment, there would be "n" number of PM orders. While doing MIGO, PM order status will be changed by automatic. Why do you want to change the Equipment Status? How do you want to change the status. Please elaborate your concern.
Regards,
Maheswaran. -
Status not visible in Equipment Master
Hi,
I am not able to view the System Status and User Status in Transaction IE02, 'General Data' Screen. However if I click on the Status button, the system and user statuses are seen ('Change Status' screen).
Is there any config setting that I have to do?
Thanks.
RajRaj,
Please check in SPRO under PM &CS >>> Techinical object>>>Equipment >>>Assign User Status Profile to Equipment Category >>> Status profile
Check wheather for perticular equipment status category status profile is assigned or not ?
Riyaj -
Synchronization between SAP and Legacy system for Equipment Master
Hello Experts
We are moving Equipment master from our legacy system to SAP system using LSMW direct input. After moving the data into SAP, legacy system will be there for a while like 6 month or a Year. So we need to setup a process which can sync Equipment data back into SAP for this period on daily basis. What would be the best method for doing this synch on daily basis??
Please suggest.
Thanks in advance
-HarkamalOne method is to create a report which will select all the new entries created and create a file with the decided fields and send it to the legacy application.You can schedule this report to run every day or based on the freequency both parties agree.In the program store the last run date of the program in TVARVC table and pick up the equipment master records created after the last run date,
so that the program sends only new records every timr.
If you have XI/PI in your landscape , depending on the capabilities of this legacy system you can change this file into inserting the data into a JDBC table , web service etc
Mathews -
EQUIPEMENT - User status and system status
Hi freind,
It would be great help if someone can brief me on procedure / bapi or function module availability for USER STATUS and SYSTEM STATUS update to equipement.
regards
Pravinhi Pravin,
Check this out
<b>USER STATUS</b>
http://help.sap.com/saphelp_erp2005/helpdata/en/56/254c40cc538437e10000000a155106/frameset.htm
<b>SYSTEM STATUS</b>
http://help.sap.com/saphelp_erp2005/helpdata/en/bd/7924da4d0d9043b426fc081669f27a/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/9f/972f72ec2a40479d2a7dec4500a4f2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/68/ebac18beabc34b90d4c1949a66dece/frameset.htm
<b>USER STATUS</b>/<b>SYSTEM STATUS</b>
http://help.sap.com/saphelp_erp2005/helpdata/en/89/a432ff461e11d182b50000e829fbfe/frameset.htm
Regards,
Santosh
Maybe you are looking for
-
Upgrade to 6.1 - sql SP stops working
Hi I'm currently using weblogic 6.1, MS SQL Server 7.0, and the weblogic sql server driver. First off this problem does not occur on other application servers or on Weblogic 6.0sp2! (Apologies if the formating is messed up) I have the following store
-
This error happens when I plug in my iPad and my iPod. The computer is authorised and I never have used a different apple ID. Tried renetering apple ID says computer is authorised. It all worked before and now won't sync. I tried to add an audiobook
-
Chrome will not open on brand new ipad mini?
Can anyone tell me how to use chrome on an ipad mini? Received one for Christmas and tried to download from App Store but it won't open
-
Cannot get executable disk repair button to appear.
I have run verify disk, which self-aborted after finding two invalid directory item counts. It said that the disk was corrupt and needed to be repaired. I have followed all of the appliocable instructions, including booting from original leopard an
-
Source does not have a runnable target.
I am just learning Stored Procedures. I have Oracle SQL Developer Version 1.5.1 loaded, going against 11G running on Ubuntu Linux. I try to build a very basic Stored Procedure: CREATE OR REPLACE PROCEDURE HR.TEST AS BEGIN Select * from hr.jobs NULL;