System Status in QA32
Dear,
Can anyone explain me all the SYSTEM STATUS which are shown in QA32 with Explanation or can anyone provide me the link for it.
Eg:-
CRTD CHCR , CRTD CHCR SPRQ ,
INSP RREC , INSP RREC PRII , INSP RREC PRII PRSI , INSP RREC SPRQ ,
LKD CALC , LKD RREC , LKD RREC PRII ,
LTCA CALC , LTCA CHCR , LTCA RREC , LTCA RREC PRII ,
REL CALC SPRQ
If more system status are there then plz provide me the complete detail.
Thanks in Advance.
Dear,
Found nothing related to my Question , i.e, system status in qa32 .
When an Inspection plan is not made then System Status for a material is CRTD CHCR SPRQ.
After an Inspection Plan is created then the System Status changes to REL CALC SPRQ.
This kind of material is required for all the stated System Statuses.
Thanks in Advance.
Similar Messages
-
hi,
pleas suggest me how to relese in system status in QA32 screen presently it shows a "CRTD CHCR SPRO" and "CRTD CHCR"
Regards
MaashishHi,
The system status you are experiencing is due to the inspection lot created but no quality plan maintained.
what you need to do now is create an inspection plan for the concerned material and then use QAC3 to reset the said inspection lots. Then use transaction code QA02 to assign the inspection plan to the already created inpsection lot.
Then you will be able to do the result entry and UD
Regards
Merwyn -
Hi all,
Dear friends i am facing one problem, the system status column in transction QA32 is appearing blank . What is the reason , as per my knoledge it is not a customizing part
ThanksHello
Please check whether for other elements like Production order status, sales order status are appearing in the system.
The reason why I asked you is that in one of my client the entire system status is not coming for any of the modules whether it is FI , MM, or SD
check and give your feedback
Regards
Gajesh -
In transaction QA32(Inspection Lot Selection) for an Inspection Lot there is a System Status (not Result Record Status) . What is the database Table-Field where this System Status is stored? OR
How can I retreive that System Status in my ABAP program?Hi
Check the Table JEST
take the OBJNR field from QALS or some other QA* table and pass to JEST
take the STAT2 status field
for description see TJ02T table
Regards
Anji -
Change Inspection Lot System Status
Hello. This forum has been very helpful in the past. Am a novice.
We have a material that wasn't completely set up when the inspection lot was created. An operation 20 needs to be added. Operation 10 exists, but no results recording have taken place yet. Current status is REL CALC SPRQ ORRQ. Since the inspection is released, we can't change the key date. How can we get it back to a state where we can update the key date?Yes, I do mean that only. You need to reset the inspection lot using T code QAC3.
Go to QAC3>Enter inspection lot number> Hit Enter> Save> Terminate the transaction.
Then, refresh the inspection lot in QA32, you would see it with system status CRTD*.
Next, go to QA02> Inspection lot num> Insp. Specifications> Change the key date to today> Click on Task list/spec (It will display the message that inspection plan *** has been assigned to inspection lot.
Then, click on Sample> Smpl. > Save.
You'll get the inspection lot with REL* status with latest Inspection plan assigned.
ntn -
Why not all fields dimmed or show in display mode after system status TECO and CLSD for Project
Dear All,
When Sets the system status TECO or even CLSD all fields for WBS Elements are not goes to Display mode. User can still edit them or change then.
The fields are:
1. WBS Element Description, technical name: PRPS-POST1
2. Person responsible number, technical name: PRPS-VERNR
Other Progress and Customer enhancement tab pages for WBS Element all fields there also editable in TECO and CLSD system status.
The client do not want to set LOCK system status for master data option.
Is there any enhancement or standard way of doing that?
Regards
Saqib UsmanDear Saqib,
Its a standard behavior of the system. In CLSD status, transactional data like Procurement gets restricted along with WBSE no and its scheduling details. But it allows to you change like WBSE desc./Responsible person.
Also go thru the below link for clarification of WBSE system status:
http://help.sap.com/saphelp_470/helpdata/en/ee/41f82246ee11d189470000e829fbbd/content.htm
For locking all master data, as above experts suggest, you should use MDLK/LKD.
Regards
Shishir -
How to get system status and user status of service order
Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh BathlaHi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu -
MR11 error message system status CLSD is active
MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .
If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status. -
Report to check the WBS "system status"
Hello friends,
Would anyone know for a standard report where I can check for the WBS "system status"?
i.e.: I want to know everything I have in AVAC status
Thanks and Regards
AlexYou can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
System will display you user / system status for all the PS Objects.
With Regards
Nitin P. -
Hi friends.
I have an issue in my report, my requirement is I have to fetch all the WBS Elements which are having System status as TECO . But in the selection screen i have given date range. Now i have to fetch all the WBS having TECO as system status with in this date range . I have used JEST table also for checking this status .I have used prps table for wbs elements.
when i give the date range i am not getting all the wbs with in tht range.
how can i validate date in this case.
Is there any table which gives system status based on date .
i want table with system status and date.
please have a look over this .Hi,
Try the fm STATUS_TEXT_EDIT.
Regards
Kiran Sure -
System status INCM is active while doing the confirmation from SRM
Hi,
User is getting the below error while trying to create confirmation in SRM for some of the PO's.
Partner XXX not found
System status INCM is active (Confirmation XXXX)
Partner not found XXX (Item 1)
The version is SRM 4.0 (Classic scenario). We have already checked the user profile and it is consistent in the system. The BP record for this user in table BUT000 is all fine. User is able to create the confirmation for other PO's. Also we have checked the G/L account for any posting period issue. Everything is fine. The error is coming while user is trying to do the confirmation for some of the PO's.
Any help is highly appreciated.
Warm regards,
AswiniThe error is coming while user is trying to do the confirmation for some of the PO's.
Check these POs to see if any of the partners are invalid. You could do this through "process purchase order" transaction. Sometimes this error occurs when one or several of the PO partners no longer exist, e.g. left the company, etc. -
Error IW351-------System: Status object does not exist
Hello,
I am getting bleow error while saving service order.
System: Status object does not exist. Message Numner IW351
Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
USEREXIT_SAVE_DOCUMENT_PREPARE in MV45afzz.
When i Try to save the service order i get the error messages which is coming from my validation
After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
As soon as i click on that i get a STOP messgae.
Which i as below.
System: Status object does not exist
If I comment all my code and write only error message then it comes.
but it does't come for information and warning message.
actually steps are
1. go to IW51
2. create notification then service order then sales order
3. if product hierarchy is different for material then it should display error on saving
4. it is giving error message(my error message)
5. if i press enter and then click on advance shipment icon(truck) for change it display standard message.
which turn me out of transaction.
but if i click on advance shipment icon without pressing enter its working fine..
my error message is a normal error message .
message e038(zcrm)
" service line must be same".
pls suggest.
Regards
LOKESHHi,
After MESSAGE add STOP. :
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
STOP.
or If ambiguity with usage of STOP being obselete use EXIT after message.
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
EXIT.
BR
Dep -
How to find out System Status of WBS Elements?
Hi PS Experts!
Please help me on my query.
I want to get a list of WBS elements whose status is Released and can be used.
If I try to search the table PRPS, it can only help me in finding WBS elements without deletion flag, with RA Key and so on.
But the System status (such as Blocked for use) etc. is not present in the table.
The one way I know is to get Object Number of WBS element from PRPS Table and insert it in JEST Table to get system status.
Or alternatively, I give the WBS element no. in CJ20N t-code, and then check for System Status.
These 2 methods work, if I do it one WBS Element at a time. If I need to get thousands of WBS elements in such a fashion, it's tedious.
So could anyone help me on this issue?
Thanks in advance,
Vinitha.Hi Bala
Yes, you have put it rather correctly.
We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
I hope it's clearer now.
Vinitha. -
Change System Status of SO item dynamically based on Reason for Rejection
Hi ppl,
Our SAP user has raised a requirement as described below:
In sales order (in creation mode (VA01) or change mode (VA02)), if at the item level, the reason for rejection is mentioned, then the system status for that item should be automatically set to Technically Complete SET (TECO); and if the user removes the reason for rejection for the item, then the system status Technically Complete should be RESET automatically.
We are looking for any user-exit or BADI available which would be allow this dynamic change of system status based on the reason for rejection field. (No manual interaction for setting or resetting the system status).
Technically, the functionality is based on the below fields:
Reason for Rejection: VBAP-ABGRU
System Status: JEST-STAT
Please provide suitable inputs.
Thanks,
Dawood
Edited by: Dawood.S.Ghasletwala on Jun 29, 2009 3:14 PMprogram: SAPMV45A
User exit: USEREXIT_SAVE_DOCUMENT_PREPARE.
loop at xvbap where updkz NE 'D'.
if not xvbap-abgru is initital.
"set your system state here.
else.
"reset your system state here.
endif.
endloop.
hmmm you can as well try if you got all you need to know already in userexit: USEREXIT_CHECK_VBAP.
Edited by: Florian Kemmer on Jun 29, 2009 11:53 AM -
Change system status from PDLV to DLV
Hi All
Please help me with this error. Already tick the delivery compeleted in Goods Receipt Tab but then system status won't change from PDLV to DLV. Is there any other way wherein I could change it?
Thank you
JesielleHi Jesielle,
We're facing the same issue with you. The status remains at PDLV even though we had set the "Delivery Completed" indicator. This only happens to Production Orders that having multiple Items.
Please share on how you resolved this issue?
Thanks.
Regards,
Hooi Chia
Maybe you are looking for
-
QT stops playing half way the clip
I think it started happening after the last QT update. QT clips that were playing fine, now have this problem Here is what happens: 1. QT starts playing clip 2. all of the sudden video playback pauses, but audio keeps going 3. when you press "play" a
-
How do I choose a specific email address for a person in a group?
I want to create a group in my address book. Several of the people in the group have 3 or more email addresses. How do I specify which email for a person is used when I send an email to the group?
-
I am wanting to put the new firmware on to my iPhone 4 and am wondering if I do this from another computer will I loose all my data - i.e music
-
Fine Tearing when scrolling pages, norm?
Hi All Whenever I scroll quickly down web pages, the main directory of all the boards of this forum is a prime example. The problem is similar to tearing but it more just affects text causing it to appear and to disappear and reappear quickly. It is
-
Dead Power Inverter on MacBook
Hello everyone, this is my first post. I am 22, stationed in Osan, South Korea with the USAF. Anyway, before I left the states my MacBook display stopped workin, initially I thought it was because it suffered a short slow descent to the ground when i