System status INCM is active while doing the confirmation from SRM

Hi,
User is getting the below error while trying to create confirmation in SRM for some of the PO's.
Partner XXX not found
System status INCM is active (Confirmation XXXX)
Partner not found XXX (Item 1)
The version is SRM 4.0 (Classic scenario). We have already checked the user profile and it is consistent in the system. The BP record for this user in table BUT000 is all fine. User is able to create the confirmation for other PO's. Also we have checked the G/L account for any posting period issue. Everything is fine. The error is coming while user is trying to do the confirmation for some of the PO's.
Any help is highly appreciated.
Warm regards,
Aswini

The error is coming while user is trying to do the confirmation for some of the PO's.
Check these POs to see if any of the partners are invalid. You could do this through "process purchase order" transaction. Sometimes this error occurs when one or several of the PO partners no longer exist, e.g. left the company, etc.

Similar Messages

System status LKD is active while doing ME21N

Hi,
While doing ME21N transaction system showing
"Error: System status LKD is active ( ORD 300303)"
Thanks and Regards
SK

Hi,
First of all ,please make sure if the status lkd is already exist for
the orders in koko4.If that's the case it is necessary to revoke the
status LKD on these orders e.g. with transaction KO02.
Best Regards,
Arminda Jack

System status INCM is active

Hi all, I am working in SRM 4.0 and when I try to do a confirmation, the system throws this message:
System status INCM is active
Transaction CO Through-postings from FI has been locked
I check all periods in FI, CO and MM and all are OK.
What can be happened?
Thanks in advance
Rosa

Sorry! the problem was solved, there is a period in CO that have problems and it was locked....
Sorry about this
ROsa

Getting Error Msg " System Status INCM is active (confirmation 7300012896)"

Hi ,
Whlie confirming Goods in "Confirm Goods/ Services" user is getting Error " System Status INCM is active ( confirmation 7300012896)
Can you please tell how to rectify this error message and confirm goods against PO.
Regards,
Avdhut

check - click before doing confirmation
there many other error message thrown at bottom side
any user locked of for network / PM order order in the PO
some message will be thrown
share taht message for more help.
Muthu

Error while doing the confirmation by COR6N

Hello Friends,
While doing the confirmation by T.C COR6N,in that screen i gave the process order no. and the phase no. and the posting date only and pressed enter, after that system thrown the error message " Incorrect Resource entered " , Message no. S1333.
Diagnosis
This message is dynamically created, no more information possible.
Actually by default from the process order system takes the resource.Here in COR6N screen i haven't given the resource than also system is giving the error message.
Thanking you guys in advance.

PLease check in the master data, Whether you have mentioned the resource..
Foe Example, In discrete manufacturing, In the routing , we will give the workcenter which will be copied to the production order...
Similarly please check and revert..
karthick

System Status INCM

Hello,
1. My Shopping cart is ordered and approved by the Approver as expected.
2. After approval the system attempts to update to update the shopping cart with the 'approved' status and release the shopping cart for follow on documents to be created.
During the step (2) while releasing the shopping cart for the follow on documents to be created the system raises error 'Unable to set status RELS, system status INCM is active'
Any idea what could be the reason? When I try to set release this manually it flows through successfully.
Helpful answers will be rewarded.
Thank you
Kasee

Hi
Which SRM version are you using ?
Please elaborate some more details, in your next reply.
Meanwhile, please go through the following SAP OSS Notes ->
Note 816989 - SRM40-SUS: Error in Change PO for a held purchase order
Note 807484 - SRM40-SUS: Status 'Canceled' with ASN & order responses
Note 1080762 - Held incomplete bids hold up closing of the RFx
Note 654367 - Meaning of message "System status UVOL is active" is unclear
Note 669742 - Held bids of completed bid invitations
Note 505805 - EBP: Invoice and account assignment
Note 530525 - EBP: Status "To be reviewed"
Related links ->
Not able to do PO Change in SRM 5.0 getting error Messages
Re: For SC the PR no. visible in BBP_PD_SC_GETDETAIL but not transferred
error while confirming goods
"system status incm is active"
You can also check in the transactions RZ20/SLG1 for errors.
For the system messages ,see if the foll notes help:
Note 894688
Note 654367
Do let me know.
Regards
- Atul

What does mean the error "System status DELT is active"?

Hi Gurus,
Can somebody tell me what does mean the error "System status DELT is active"?

Hi Disha,
I m getting the same message while trying to update the contract using FM "bbp_pd_ctr_update".
When I go and check the Item or header it is not marked for Deletion. Is there any table or field which indicates that it is marked for Deletion.
Any help on this is highly appreciated.
Regards
Surender

While doing the goods issue system is thruoghing an erro message no VL621

hi ,
actually while doing the goods issue we had put a validation if that filed(serial number) is not valid.like AVAILABLE then the system has through to an error message.but after that error message system is throughing an nother error.
Risk of posting several mat.documents for one delivery->long text
    Message no. VL621
Diagnosis
    Processing has been terminated because there is the risk that the system
    creates several material documents for this delivery.
Procedure
    If this message occurs frequently, please note the exact situation and
    procedure as well as error messages and inform the system administrator.
and we changed that error to warning also still we are getting that error message.
how to stopthis error message.

hi actually not for serial number check.
there is a Z field in serial number master which is used for SIM number.
that SIM number will be validated with available SIM number from another Z table.
after this SIM error system is throughing this VL621 error after transaction terminated message.

HT201263 While doing the restore the connect to Itunes image is still on my phone and has not shut off? The Itunes "status" area now says "Processing File" and has said this for 15 mintues with no change. What do I do??? This is the second Restore I've a

While doing the Restore the "connect to Itunes Image is still on my phone and has not shut off or changed since starting the REstore. Now Itunes status bar says "Processing File" but has not changed or done anything for 15+ minutes. What do I need to do? Let it go or is it not working???? FYI, I tried to update to the 6.0.1 (I believe thats this update)

This was the third Restore I've attempted today.... 'm not sure what all I did including unplugging and plugging it back in, and messing with tryign to select my phone vs. my husbands but it starting moving again. It's now attempting to "back up" from ICloud... we'll see. Thanks

Error while doing the Usage Decision in transaction QA32

Hello Friends,
While doing the goods receipt for customer returns from customer, system generated a inspection lot with inspection type 06.
So in QA32 transaction, system is showing that inspection lot, but in same screen, against the column InspPlan: Material, system is not showing any entry.
Later on after analysis, i found that no inspection plan was assinged to the material, Plant for which that inspection lot was created. When i checked that inpection lot in transaction QA03, in Insp. Specifications tab, agaisnt the Assigned Specification section, system was not showing any entry in fields Group, Group Counter, Plant, Usage.
And against that inspection lot,status CRTD, PREQ, CHCR are active.
Because of which, when user is trying to do the UD against this lot system throwing the error message as Status check error.
When i checked again i found that status CRTD is throwing the error message.
Hence friend, i want to do the Usage decision for that inspection lot than how to do?
Now user has assigned the material, plant to the inspection plan in QP02.
Should i go to QA02 transaction, and in Insp. Specification tab, for fields group, group counter, usage, Plant, maintain the values?
Will this allow me to do the usage decision against the inspection lot which got generated when no inspection plan was assingned to that material, plant?
Waiting for your valuable inputs.

For Result Recording and Ud the inspection lot status must be REL as u told ur status is CRTD it Mean Some master
is missing in inspection lot,generally inspection plan for that u run QA02 enter inspection lot no go to specification tab
there a button assigned specification there click on that as u click on button u will find that plan for above material copied to lot and it will show u plan detail line group and group counter no.
then go to next screen Sample if sample management is active and click on sample then system will calculate sample size then save ur lot. it would get Status As REL now ui can enter result or take UD
for QM setting Refer
http://sap-questions.blogspot.com/

System status NMAT is active (NTW 4000297)

Hi,
I am trying to confirm a "Primary Cost activity" but while doing so i get a message "System status NMAT is active (NTW 4000297)".
I want to understand how is this system status (NMAT) getting activated? and what is the purpose of this status?
Warm Regards,
Jatinder Bansal

Hi,
Generally system sets the NMAT status at Order header level when you create an Order without any material assignment.
Try adding a material component and see if the status gets reset.
Else you can check the settings in tcode OPJK. Tick the "No Check" check box and run your process again. You should not get this status now.
Regards,
Gokul

Error while doing the return delivery

Hi Experts,
I had created an PO with describe requirement for 50 quantity and did partial confirmation of 30 quantity.
While doing the return delivery for 10 quantity system is throwing error
Line 1: No goods receipt possible for purchase order 4200051444 00001
When tried doing the same process in ECC, the return delivery is posted without error.
We were able to do the return delivery earlier. Can anybody throw light on, for the possible reason for this error.
Your early response is appreciated.
Regards,
ASGMDM

HI,
This is due to anyone of the following :
01. No further confirmation expected button is checked while doing confirmation for quantity 30. Please check the same in PO, if it is checked please uncheck the same so that you can do further confirmations.
02.Please check the confirmation status of 30 quanityt which you posted earlier. It should be having Posted in Backend. If it is not, then you cannot create return delivery for the same. Also please note that Back end GR document number for 30 quantity should be updated in the table BBP_PDBEH under the field BE_OBJECT_ID.
Thanks
Rajesh K

ERROR WHILE DOING THE SERVICE ENTRY SHEET

Hi All,
I have budget INR 3000 & i created PR INR 2500 ,PO for the same amount INR 2500.Against the same i made INR 2000 down payment and it would as statistical in SAP. But while doing the service entry for same PO ,budget exceeded error coming.
I seen Program RFFMS009 program also all DP figures updated as statistical ,but while clearing the DP through F-54 system getting budget exceeded error message.
Kindly help me .we are in 4.7
Former budgeting
Rgds
Manisuma

Hi All,
There is problem in Field status varaint
Rgds
Suma

Auto check number pick while doing the F110

HI All,
Mentioned error message shown while doing the F110.
Check number status at beginning of processing:
My object is to pick the cheque numbers automatically ,while making the payments through F110.
System is not consuming the numbers.
Rgds
Mani Kumar

4 Possibilities -
> Check if you have the RFFOUS_C program defined for the payment method in Country settings - FBZP.
> Check if your variant for RFFOUS_C has the right payment method for printing checks.
> Check if yo have any other proposal for same vendor already created but not finished the payment run for that. It might be due to duplication of entries.
> Check your check-lot. Hope its not exhausted.
Please search forums for more.
Regards,
Zubin

System status REL is active , Message no. BS013,CO88 COST-BY-SALES-ORDER

Hi Experts,
I meet error when i do the production order settlement"CO88" ,
Which the production mode is cost-by-sales-order undifferentiated mode.
the error information as bellow:
System status REL is active (ORD XXXXX)
Message no. BS013
Diagnosis
Object ORD XXXXXX has system status REL (Released). According to this status, transaction 'settelemtn' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Pls. Help in resolving.
Best Regards,

Dear Szymon and Mukthar,
      Fisrtly,Thank you for your help!
      I have changed the status "TECO"(the status is "TECO PCNF DLV PRC GMPS MANC SETC"),then I settlement the production order.
     The system still error:
"Debit from actual settlement" not allowed (Sys. status REL, object VB0000000015000010)
Message no. BS051
Diagnosis
The status check for the status object VB0000000015000010 indicated that the procedure "Debit from actual settlement" cannot be performed because Sys. status REL forbids it.
System Response
Procedure "Debit from actual settlement" is not performed.
Procedure
If procedure "Debit from actual settlement" is to be performed, the Sys. status REL of object VB0000000015000010 must be reset.
Other statuses than Sys. status REL can also prevent the procedure. This message does not tell you all statuses which currently prevent procedure "Debit from actual settlement".
Regards!
Gang.Tian
remark:
I use the MTO mode, the receiver of settlement is SALES ORDER.(the settlement rule is SDI)

System status INCM is active while doing the confirmation from SRM

Similar Messages

Maybe you are looking for