System status LKD is active while doing ME21N

Hi,
While doing ME21N transaction system showing
"Error: System status LKD is active ( ORD 300303)"
Thanks and Regards
SK

Hi,
First of all ,please make sure if the status lkd is already exist for
the orders in koko4.If that's the case it is necessary to revoke the
status LKD on these orders e.g. with transaction KO02.
Best Regards,
Arminda Jack

Similar Messages

System status INCM is active while doing the confirmation from SRM

Hi,
User is getting the below error while trying to create confirmation in SRM for some of the PO's.
Partner XXX not found
System status INCM is active (Confirmation XXXX)
Partner not found XXX (Item 1)
The version is SRM 4.0 (Classic scenario). We have already checked the user profile and it is consistent in the system. The BP record for this user in table BUT000 is all fine. User is able to create the confirmation for other PO's. Also we have checked the G/L account for any posting period issue. Everything is fine. The error is coming while user is trying to do the confirmation for some of the PO's.
Any help is highly appreciated.
Warm regards,
Aswini

The error is coming while user is trying to do the confirmation for some of the PO's.
Check these POs to see if any of the partners are invalid. You could do this through "process purchase order" transaction. Sometimes this error occurs when one or several of the PO partners no longer exist, e.g. left the company, etc.

System Status LKd is Active( Ord 4257568)

Hi,
I am doing dsettlement of an PM order with transaction KO8G, but by one order I get an error message " System Status LKd is Active( Ord 4257568)
How to tackle this?
Thansk
Br,
akkshaya

It also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.

"System status AALK is active" and "System status LKD is active" errors

Hi,
We are on SRM 4.0. When creating a shopping cart from a specific catalog the user is receiving two error messages.
"System status AALK is active" and "System status LKD is active"
How do I resolve these errors?

It's more like a CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.

System status LKD is active

Hi gurus,
My client wants to process a Purch order from a Preq. But when he wants to save his PO, he got this error message : SYSTEM STATUS LKD IS ACTIVE (ORD 9XXXXXXX).
Please advice
regards
Edited by: Patrick Konan-Messou on Apr 10, 2008 3:54 PM

It also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.

System status LKD REL for operation & phases in Process order

Hi Gurus,
We have a process order in which system status for operations & phases is LKD REL due to which user is not able to confirm the process order. The status of process order is REL PRC APNG APRS BASC BCRQ GMPS MACM RESA SETC. One of the user from planning has set the status to LKD due to some artwork changes. Now another user set the status to unlock. Locked status from order status was reset but at operation & phases level the status is still LKD REL & hence order confirmation is not allowed.
I try to again set the status to lock but i am getting message system status LKD is active (ACT 40547870 0010) which is similar to one which we get during order confirmation.Pls. suggest.
Regards
Amit

Hello Amit
If the status LKD is not set for the order header, this is possibly an inconsistency.
Please open an OSS incident to SAP for further analysis.
BR
Caetano

Internal Order - System Status LKD

Hi All,
For an internal order which has system status LKD active, can I mark it for deletion?
When tried to do so, I get an error message like
" E BS 013 System status LKD is active (ORD XXX)
KO 424 Order XXX / Mark for deletion "
What can be done?
Thanks ,
Janani

Hi,
if your order is marked for deletion then you can't put it for locked status and it goes other way around i.e. if your order is lkd ,it can't be marked for deletion.
Reward points if it helps.
Regards
Karan

What does mean the error "System status DELT is active"?

Hi Gurus,
Can somebody tell me what does mean the error "System status DELT is active"?

Hi Disha,
I m getting the same message while trying to update the contract using FM "bbp_pd_ctr_update".
When I go and check the Item or header it is not marked for Deletion. Is there any table or field which indicates that it is marked for Deletion.
Any help on this is highly appreciated.
Regards
Surender

ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N

Dear All Expert,
I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
Please find the below ABAP Runtime Error.
Runtime Errors         LOAD_TYPE_VERSION_MISMATCH
Date and Time          10.02.2011 11:13:07
Short text
     Change of a Dictionary structure at runtime of a program.
What happened?
     Runtime error
     The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
      terminated because one
     of the statements could not be executed at runtime.
What can you do?
     Restart the program.
     If the error persists, contact your SAP administrator.
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
Error analysis
     The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
      changed
     during the flow of the transaction.
     As the type was already used in the old version
     and in the new type should be used in the same transaction in the new
      version, the transaction had to be cancelled to avoid inconsistencies.
How to correct the error
    Try to restart the program.
System environment
    SAP-Release 700
    Application server... "iqe"
    Network address...... "172.25.0.85"
    Operating system..... "Linux"
    Release.............. "2.6.9-55.ELsmp"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "iqe"
    Database type..... "ORACLE"
    Database name..... "IQE"
    Database user ID.. "SAPSR3"
    Terminal................. "MUMJML5727"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Dec 26 2010 20:17:07"
    create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
    Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 285
Patch text.. " "
Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
SAP database version. 700
Operating system..... "Linux 2.6"
Memory consumption
Roll.... 16192
EM...... 25139088
Heap.... 0
Page.... 40960
MM Used. 8038136
MM Free. 4528408
User and Transaction
Client.............. 600
User................ "JKMM"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
Screen.............. " "
Screen line......... " "
Information on where terminated
    The termination occurred during generation of the ABAP/4 program
     "CL_IM_WRF_MM_PROC_PO==========CP".
    The termination occurred in line 213
    of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
     calling the editor 2130).
Source Code Extract
Line SourceCde
183   DATA: l_flag TYPE wrf_pbas_boolean.
184
185   CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
186     IMPORTING
187       e_preview_flag = l_flag.
188
189   IF NOT l_flag IS INITIAL.
190
191     DATA: l_header TYPE REF TO cl_po_header_handle_mm.
192
193     MOVE im_header ?TO l_header.
194
195     CALL METHOD l_header->if_output_mm~preview( ).
196
197     CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
198
199 ***$ Widening Cast for printing information.
200 **    CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
201 **      EXPORTING
202 **        im_header = l_header.
203
204 * Printing Preview
205 * IF NOT gv_preview IS INITIAL.
206 *    CALL METHOD l_header->if_output_mm~overview( ).
207 *    CALL METHOD l_header->if_output_mm~preview( ).
208 * clear gv_preview.
209   ENDIF.
210
211 * ENDIF.
212
>>>>> ENDMETHOD.
Internal notes
    The termination was triggered in function "ab_RxDdicStruShareFailed"
    of the SAP kernel, in line 2539 of the module
     "//bas/700_REL/src/krn/runt/abtypload.c#11".
    The internal operation just processed is " ".
    Internal mode was started at 20110210111306.
    Name of the changed type......: "WRF_POHF_KOMP_STY"
    New version of the type.......: 20070508193207
    Old version of the type.......: 20070508193207
    New user......................: "Type" "WRF_POHF_KOMP_STY"
    Version of the new user.......: 20070508193207
    Old user......................: "???" "???"
    Version of the old user.......: "???"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
(CTrcStack2+0x78)[0x6cbb78]
(CTrcStack+0xb)[0x6cc17b]
(ab_rabax+0x3be5)[0xb8d985]
(_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
(_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
(_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
(_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
(ab_GetView+0xc1d)[0xb0ee1d]
(_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
(_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
(_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
(_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
(sc_blkle+0xdd)[0xec6e4d]
(rs_oper_abap1729+0x37)[0x10eb237]
(rs_expan_abap+0xa1996)[0xfd7a2a]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_inclu+0x5fa)[0xe0d50a]
(rs_oper_abap2160+0x3a)[0x1115d6a]
(rs_expan_abap+0xcd41d)[0x10034b1]
(_Z8sc_expanj+0x76d)[0xe1d55d]
(_Z5parsejPi+0x258)[0xe19998]
(sc_check+0xb9c)[0xe1857c]
(sc_checkStart+0x41)[0xe1ac51]
(cg_generate+0xb65)[0xe57755]
(ab_gabap+0x14a)[0xb01a5a]
(dy_gen_abap+0x63c)[0x74428c]
(ab_genprog+0x13d3)[0xb03d13]
(_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
(_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
(_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
(_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
(_Z11ab_FillCfixtj+0x65)[0x957ae5]
(_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
(_Z8ab_jaboov+0x623)[0x959793]
(_Z8ab_extriv+0x607)[0x8ba9c7]
(_Z9ab_xeventPKt+0x1c1)[0xa1c021]
(_Z8ab_triggv+0x9c)[0xa1c77c]
(ab_run+0x97)[0xbde5c7]
(N_ab_run+0x9)[0x736359]
(dynpmcal+0x669)[0x7333b9]
(dynppai0+0x8eb)[0x734d9b]
(dynprctl+0x3e9)[0x733db9]
(dynpen00+0x4a5)[0x726eb5]
(Thdynpen00+0x359)[0x541bd9]
(TskhLoop+0xc49)[0x54d999]
(ThStart+0x20f)[0x55b29f]
(DpMain+0x2da)[0x4bd49a]
(nlsui_main+0x9)[0x4910c9]
(main+0x33)[0x491103]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
Please help me to resolve the issue.
Thanks & Regards
SKK

read this part again: The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
how often had you restarted ME21N before you posted this message?
In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system.

User Status LKD is active(ORDTMC1001)

Hi,
While doing capital purchase order through internal order a message is being appeard as "User status LKD is active(ORDTMC1001).
What could be the possible solution ?
Best Regards,
Samrat Roy

Dear Waman,
Whenever I create new Internal Order user status shows PLIM and LKD under Control Data of Internal Order master. Go to Set / Reset and uncheck the tick from status LKD and save the record. Why this status become locked i.e, LKD automatically in every internal order creation ? How it can be removed and during creation of new internal order user status will show only "PLIM". What should be the actual status of Status Profile for Internal Order ?
Best Regards,
Samrat Roy

System status NMAT is active (NTW 4000297)

Hi,
I am trying to confirm a "Primary Cost activity" but while doing so i get a message "System status NMAT is active (NTW 4000297)".
I want to understand how is this system status (NMAT) getting activated? and what is the purpose of this status?
Warm Regards,
Jatinder Bansal

Hi,
Generally system sets the NMAT status at Order header level when you create an Order without any material assignment.
Try adding a material component and see if the status gets reset.
Else you can check the settings in tcode OPJK. Tick the "No Check" check box and run your process again. You should not get this status now.
Regards,
Gokul

System status REL is active , Message no. BS013,CO88 COST-BY-SALES-ORDER

Hi Experts,
I meet error when i do the production order settlement"CO88" ,
Which the production mode is cost-by-sales-order undifferentiated mode.
the error information as bellow:
System status REL is active (ORD XXXXX)
Message no. BS013
Diagnosis
Object ORD XXXXXX has system status REL (Released). According to this status, transaction 'settelemtn' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Pls. Help in resolving.
Best Regards,

Dear Szymon and Mukthar,
      Fisrtly,Thank you for your help!
      I have changed the status "TECO"(the status is "TECO PCNF DLV PRC GMPS MANC SETC"),then I settlement the production order.
     The system still error:
"Debit from actual settlement" not allowed (Sys. status REL, object VB0000000015000010)
Message no. BS051
Diagnosis
The status check for the status object VB0000000015000010 indicated that the procedure "Debit from actual settlement" cannot be performed because Sys. status REL forbids it.
System Response
Procedure "Debit from actual settlement" is not performed.
Procedure
If procedure "Debit from actual settlement" is to be performed, the Sys. status REL of object VB0000000015000010 must be reset.
Other statuses than Sys. status REL can also prevent the procedure. This message does not tell you all statuses which currently prevent procedure "Debit from actual settlement".
Regards!
Gang.Tian
remark:
I use the MTO mode, the receiver of settlement is SALES ORDER.(the settlement rule is SDI)

System status WCRE is active (ACT #2)

dEAR SIR
When iam doing production order creation by co01 iam geting error as shown below
System status WCRE is active (ACT #2)
Message no. BS013
Diagnosis
Object ACT #2 has system status WCRE (Work center until release). According to this status, transaction 'Release operation' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
pl give solution
regards
Baswarj

Dear,
WCRE - Indicates Workcenter Until Release.
Please check the status of you work center CR02 it should not be locked or active for deletion flag also the usage as 009. Also check the setting of OP45.
Go to BS22 transaction for "I0270 - WCRE Work center until release" double click and for release make it allow.
Refer this thread,
prod.prder system status
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 11, 2010 1:54 PM

System status APNG is active

Hi,
I have created one process order but while realsing it system gives error.
"System status APNG is active".
and while creating this order system gives error
Master recipe XXXXXXX xx has not been approved
why these errors are coming and and how to solve.
As far for realsing the order i have tried with option individual approval but No authorization for that
Please let me know the slouation,
thank you,
Sakshi

Hello Sakshi,
Please go through below document for detail knowledge of Creating and releasing Process order step by step.
Creating and Releasing Process Orders - SAP Pharmaceuticals - SAP Library
I hope this document helpful to you for this issue,,
Thanks & Regards
Umesh Mali

Getting Error Msg " System Status INCM is active (confirmation 7300012896)"

Hi ,
Whlie confirming Goods in "Confirm Goods/ Services" user is getting Error " System Status INCM is active ( confirmation 7300012896)
Can you please tell how to rectify this error message and confirm goods against PO.
Regards,
Avdhut

check - click before doing confirmation
there many other error message thrown at bottom side
any user locked of for network / PM order order in the PO
some message will be thrown
share taht message for more help.
Muthu

System status LKD is active while doing ME21N

Similar Messages

Maybe you are looking for