System status LKD REL for operation & phases in Process order
Hi Gurus,
We have a process order in which system status for operations & phases is LKD REL due to which user is not able to confirm the process order. The status of process order is REL PRC APNG APRS BASC BCRQ GMPS MACM RESA SETC. One of the user from planning has set the status to LKD due to some artwork changes. Now another user set the status to unlock. Locked status from order status was reset but at operation & phases level the status is still LKD REL & hence order confirmation is not allowed.
I try to again set the status to lock but i am getting message system status LKD is active (ACT 40547870 0010) which is similar to one which we get during order confirmation.Pls. suggest.
Regards
Amit
Hello Amit
If the status LKD is not set for the order header, this is possibly an inconsistency.
Please open an OSS incident to SAP for further analysis.
BR
Caetano
Similar Messages
-
Create default operation & phase in process order
Dear PP Guru,
We used PP-PI and have a production type for simple production that there is no recipee for them.
We used auto generate order for this kind of production.
But in order, only operation is created and no phase is generated.
Hence this process order can not be confirm?
Is there any solution for this??
Best regards,
Freddy HaDear,
In transaction "OPJG" you need to maintain default values for creating operation in case the system is unable to find a suitable master recipe. You need to maintain this for Plant/Order type combination.
Then define the confirmation parameter for this order type and plant for operation level confirmation.
Please refer this link,
Re: Creation of Process Order without assigning master recipe -
COOISPI: No display of operations/phases from process orders
hi All,
I'm using EHP$4and having this problem The List "Operations/Phases" does not show any output in the process order information system (Transaction COOISPI).,however i used to work on EHP3 and did'nt face this problem
please advice
Regards,
Ahmed SobhiHi Ahmed,
I think the SAP correction note 1460244 will solve your problem.
Best regards,
Marcelo -
Internal Order - System Status LKD
Hi All,
For an internal order which has system status LKD active, can I mark it for deletion?
When tried to do so, I get an error message like
" E BS 013 System status LKD is active (ORD XXX)
KO 424 Order XXX / Mark for deletion "
What can be done?
Thanks ,
JananiHi,
if your order is marked for deletion then you can't put it for locked status and it goes other way around i.e. if your order is lkd ,it can't be marked for deletion.
Reward points if it helps.
Regards
Karan -
WBS Element System Status to REL-Release
Hi,
I am looking for a way to set the System Status to REL instead of CRTD- created as soon as the WBS element is created.
Can any one please provide their valuable suggestion.
Thanks for your help,
SatishHi Satish,
Sorry to say that I am still unclear with the requirement.
When you say that users want to post cost to the WBS element, is it a direct Cost entry against the WBS or is it through GI/Service Enrtry and acceptance?
If it is through GI/Service Enrtry and acceptance, then no costs can be posted without the release of the WBS.
Hope I have put my point clearly.
regards
Pratap.V -
System status LKD is active while doing ME21N
Hi,
While doing ME21N transaction system showing
"Error: System status LKD is active ( ORD 300303)"
Thanks and Regards
SKHi,
First of all ,please make sure if the status lkd is already exist for
the orders in koko4.If that's the case it is necessary to revoke the
status LKD on these orders e.g. with transaction KO02.
Best Regards,
Arminda Jack -
"System status AALK is active" and "System status LKD is active" errors
Hi,
We are on SRM 4.0. When creating a shopping cart from a specific catalog the user is receiving two error messages.
"System status AALK is active" and "System status LKD is active"
How do I resolve these errors?It's more like a CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.
-
Hi gurus,
My client wants to process a Purch order from a Preq. But when he wants to save his PO, he got this error message : SYSTEM STATUS LKD IS ACTIVE (ORD 9XXXXXXX).
Please advice
regards
Edited by: Patrick Konan-Messou on Apr 10, 2008 3:54 PMIt also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.
-
System Status LKd is Active( Ord 4257568)
Hi,
I am doing dsettlement of an PM order with transaction KO8G, but by one order I get an error message " System Status LKd is Active( Ord 4257568)
How to tackle this?
Thansk
Br,
akkshayaIt also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.
-
How to delete WBS if system status is REL
How to delete WBS at 2nd level if system status is REL (no cost have been populated yet). What happened is that system is set to auto release when created.
Hi,
If there are no postings , or account assignment objects such as purchase order, production order etc, you can right click the WBSE and delete it. Also you can select the WBSE and use the 'delete' icon to delete the WBSE.
Muraleedharan.R
091 9880028904 -
Batch determination for raw materials in process order
I have defined a sort rule, batch search strategy and assiigned this strategy to process order type.classification for batch is also defined with charecterstic mentioned in sort rule.But when i am doing BD for raw materials in Process order , it is barnching into some other screen saying, no selection criteria and no strategy info defined. what are the necessary settings to make BD possible for all the materials having batch management.
Hi
Config Setting In Batch Management
This will help you for config setting:
Logistics general - Batch Management
1.1. Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
1.2. Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
1.3. Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements Transaction
1.4. Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics Transaction
1.5. Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
1.6. Batch Determination u2013 Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
1.7. Batch Determination u2013 Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
1.8. Batch Determination u2013 Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
1.9. Batch Determination u2013 Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
1.10. Batch Determination u2013 Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
1.11. Batch Determination u2013 Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
1.12. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
1.13. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
1.14. Batch Determination u2013 Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
1.15. Batch Determination u2013 Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
1.16. Batch Determination u2013 Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
1.17. Batch Determination u2013 Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
1.18. Batch Determination u2013 Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
1.19. Batch Determination u2013 Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
1.20. Batch Determination u2013 Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
1.21. Batch Determination u2013 Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB
regards
Faisal -
Cost Analysis Report - For a range of process orders
Dear all,
Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
Thanks
NagarajanDear
You can use cost analysis report like
1.S_ALR_87099932 - Variances Between Costing Runs
2.S_ALR_87099931 - Price vs Cost Estimate
3.S_ALR_87099932 - Variances Between Costing Runs
5.KOC4
Regards
JH -
Update Operations in a process order
Hi,
My task is to update operational level information in a process order via standard function module, can any one help me by providing a function module or a method to update the operations in a process order.
Thanks in advance.
Kind Regards,
Abhi.Hi Gabriel,
No, this function is not released to the customer.
You can check this by going to the Attributes screen of the function module. The last field in the General data section shows the release date of a function if it has been released (you can see an example of a released function module by checking any of the BAPI_ function modules).
Cheers,
Brad -
PP-PI - System status LKD for a process order - how to set/unset it
Hi gurus,
I need some help.
I have to lock / unlock process orders inside a program (not manually).
I would like to do this without using Batch Inputs, which are not reliable.
I know the function STATUS_CHANGE_INTERN can modify the order status; but I don't know if the result I get is the same I get doing manually: "Process order" --> "Functions" --> "Restrict processing" --> "Lock"/"Unlock".
Can anybody help me?
Thanks in advance.
J.Hi
I found this thread which is talking about Internal Order Status change and also a solution for the same.
[Status change|http://forums.sdn.sap.com/thread.jspa?threadID=1516496]
Br,
Vijay V -
Inactivate system status changability in sales operation
Hi Experts:
I need to inactivate the posibility for end users to choose a system status directly in operation. They should be able only to change the user status.
Is there an authoration object or a BAdI to do so?
Best regards,
ChristinaHi Christina,
There is a BADI CRM_ORDER_AUTH_CHECK with the method CRM_ORDER_ADD_AUTH_CHECK.
By implementing extra checks as per the requirement, we can control the authorization.
Hope this will help you resolve your query.
Regards,
Susanta
Maybe you are looking for
-
I can't see the cursor on the logon screen with my MBP when using it in bright sunlight.
I have a 15 inch MacBook Pro with an anti glare screen. I am running Lion 10.7.3. It is being used in bright sunlight in southern greece very sucessfully apart from the fact I cant see the cursor on the logon screen to select the user I want to lo
-
I need to reinstall Abobe Acrobat PRO X but can't seem to find it anywhere on this site.
I have a legitimate license. Please advise.
-
I have a new macbook pro and want to purchase adobe photoshop. How can I do that with apple retina display compatibility? Does anyone use photoshop on your mac?
-
JPA EntityListener getting Principal
Hello, I have created an EntityListener to set the audit columns when persisting public void prePersist(Object o) { if (o instanceof Auditable) { String name = "SCM"; Auditable auditable = (Auditable)o; AuditInformation info = auditable.getAuditInfor
-
Safari quits; Is this a Microsoft version/vision of things to come
I just got off the phone with support and nothing accomplished. Safari quits when playing an imedded player. And No help. Reset Safari, tried deleting files as some posts listed and still the same; Everything seems to work in Firefox.