System status REL is active , Message no. BS013,CO88 COST-BY-SALES-ORDER
Hi Experts,
I meet error when i do the production order settlement"CO88" ,
Which the production mode is cost-by-sales-order undifferentiated mode.
the error information as bellow:
System status REL is active (ORD XXXXX)
Message no. BS013
Diagnosis
Object ORD XXXXXX has system status REL (Released). According to this status, transaction 'settelemtn' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Pls. Help in resolving.
Best Regards,
Dear Szymon and Mukthar,
Fisrtly,Thank you for your help!
I have changed the status "TECO"(the status is "TECO PCNF DLV PRC GMPS MANC SETC"),then I settlement the production order.
The system still error:
"Debit from actual settlement" not allowed (Sys. status REL, object VB0000000015000010)
Message no. BS051
Diagnosis
The status check for the status object VB0000000015000010 indicated that the procedure "Debit from actual settlement" cannot be performed because Sys. status REL forbids it.
System Response
Procedure "Debit from actual settlement" is not performed.
Procedure
If procedure "Debit from actual settlement" is to be performed, the Sys. status REL of object VB0000000015000010 must be reset.
Other statuses than Sys. status REL can also prevent the procedure. This message does not tell you all statuses which currently prevent procedure "Debit from actual settlement".
Regards!
Gang.Tian
remark:
I use the MTO mode, the receiver of settlement is SALES ORDER.(the settlement rule is SDI)
Similar Messages
-
System status CLSD is active , Message no. BS013
Hi Experts,
One of our users got below error message when they run Dep. the order is a PM order. PM user has created and due to some reason they have not processed and later it has been closed. This order does not have any actual postings or any settlement rule as well. This error seems to be very illogical and unusual.
User has tried to activate status closed but that function is not active.
System status CLSD is active (ORD XXXXX)
Message no. BS013
Diagnosis
Object ORD XXXXXX has system status CLSD (Closed). According to this status, transaction 'FI: Postings' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
Pls. Help in resolving.
Best Regards,
AzizHi Aziz,
It looks like the order was closed - status CLSD active.
You need to revoke status "Closed" before you can post to it.
To revoke CLSD in IW32 in menu:
Order --> Functions -> Complete -> Cancel business completion
Regards,
Szymon -
MR11 error message system status CLSD is active
MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .
If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status. -
System status WCRE is active (ACT #2)
dEAR SIR
When iam doing production order creation by co01 iam geting error as shown below
System status WCRE is active (ACT #2)
Message no. BS013
Diagnosis
Object ACT #2 has system status WCRE (Work center until release). According to this status, transaction 'Release operation' is not allowed.
Procedure
You can only carry out the requested function if this is allowed according to the status of the object.
pl give solution
regards
BaswarjDear,
WCRE - Indicates Workcenter Until Release.
Please check the status of you work center CR02 it should not be locked or active for deletion flag also the usage as 009. Also check the setting of OP45.
Go to BS22 transaction for "I0270 - WCRE Work center until release" double click and for release make it allow.
Refer this thread,
prod.prder system status
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 11, 2010 1:54 PM -
Hi,
I am having a problem with a service order. When i am tryin to book time on it using CAT2 i get an error message "System status CRTD is active."
Can any one please advice what is that i need to do in order to remove this error message.
Regards,
ChinmayaHi,
In general if the Order is in CRTD State then you can not post any thing on that.
So, make the Order to REL (Released Status) and Try..
Regards,
Siva -
We are using SRM 5.0-Extended classic scenario. The Purchase order which was created and replicated to the backend R/3 system . But now the *status changed to *"Transaction complete " status and if am going to change the PO am getting pop-up message as "System status CMPL is active".
Is any way to change the PO status ? Or any other function module is available , I have tried function module
BBP_PD_PO_STATUS_CHANGE. But am getting the same status.
Kindly adviceHi,
Its great that you were able to solve the problem. May be you dint specify the required keywords for this thread to appear. Its always a good habit to search the forum before posting the question. We really appreciate that here in SDN.
P.S: I dint have any hand in restricting that thread from appearing in the search list
Thanks,
Pradeep -
Change PO--error "System status ITRE is active".
Hi,
When I am trying to release a PO manually i am getting one error message "Error changing to status RELP, System status CMPL is active" in transaction code SWO1.
Thanks,Hello,
ITRE status means: In Transfer to Execution Syst.
Reprocess the PO using BBP_PD_PO_TRANSFER_EXEC.
Helpful Note: 1090580
Hope this helps.
Thanks
Ashutosh -
Hi all, I am working in SRM 4.0 and when I try to do a confirmation, the system throws this message:
System status INCM is active
Transaction CO Through-postings from FI has been locked
I check all periods in FI, CO and MM and all are OK.
What can be happened?
Thanks in advance
RosaSorry! the problem was solved, there is a period in CO that have problems and it was locked....
Sorry about this
ROsa -
Error in F110: System status CRTD is active (ORD 603625)
Hi All,
In APP, one of the vendor is going in to error .
The log says System status CRTD is active (ORD 603625)
When I check, for the particular item in vendor line item display, that is linked to the
purchase order, which in turn is linked to the internal order 603625 . The internal Order 603625 is
in CRTD status.
I think the status of the order needs to be changed to TECO.
But I have two questions here.
1. What factors should be looked in to before changing the
status of the order to TECO.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Regards
RudraHi Rudra,
You received this error from the Status Management of the Internal Order.
1. What factors should be looked in to before changing the status of the order to TECO.
Actually, you should not change the status to TECO (Technically Complete) rather you should Release it then APP will be processed.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Every status in the Order is assigned to the Transactions Allowed
Common Scenario
1. When status of the order is CRTD then you can only post budget to the order, you can not make FI Posting.
2. When status is RELE then you can make an FI Posting.
Ask the owner of the Internal Order to shift the status if conditions have been met.
Regards,
Chintan Joshi -
System status TECO is active (ORD 1001020)
Dear All,
System status TECO is active (ORD 1001020).
Thanks
paragParag,
I don't seem to be able to find a question in your post.
You can set/unset TECO status in transaction CO02. Ignore any warning message concerning change. Then, Functions>Restrict Processing>'Technically complete' or 'revoke technical completion'. Save
Rgds,
DB49 -
"System status AALK is active" and "System status LKD is active" errors
Hi,
We are on SRM 4.0. When creating a shopping cart from a specific catalog the user is receiving two error messages.
"System status AALK is active" and "System status LKD is active"
How do I resolve these errors?It's more like a CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.
-
Hi gurus,
My client wants to process a Purch order from a Preq. But when he wants to save his PO, he got this error message : SYSTEM STATUS LKD IS ACTIVE (ORD 9XXXXXXX).
Please advice
regards
Edited by: Patrick Konan-Messou on Apr 10, 2008 3:54 PMIt also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.
-
System Status LKd is Active( Ord 4257568)
Hi,
I am doing dsettlement of an PM order with transaction KO8G, but by one order I get an error message " System Status LKd is Active( Ord 4257568)
How to tackle this?
Thansk
Br,
akkshayaIt also depends how your orders are being generated. If you are generating the orders from a sales order line item and a user deletes the line item or rejects it, the service order will automatically be locked from further processing. The action log will display the end users name as the one who locked the order, but the transaction code will be VA02.
-
Getting Error Msg " System Status INCM is active (confirmation 7300012896)"
Hi ,
Whlie confirming Goods in "Confirm Goods/ Services" user is getting Error " System Status INCM is active ( confirmation 7300012896)
Can you please tell how to rectify this error message and confirm goods against PO.
Regards,
Avdhutcheck - click before doing confirmation
there many other error message thrown at bottom side
any user locked of for network / PM order order in the PO
some message will be thrown
share taht message for more help.
Muthu -
Hi All,
While Iam trying to do physical count MI04 system thorwing this error message
{System status PIAC is active (EQU 10000001)
Object EQU 10000001 has system status PIAC (Inventory Active). According to this status, transaction 'Physical inventory' is not allowed.}
This material have activated serial management. In MI04 physical count I had entered Qty. and system will pop up new diallog box enter serial number I had enetred serial no. still system is throwing above error messge.
Please any one can help how to fix this error messge.
Thanks
Nagaraj Khi
May be your MM person has posted the physical inventory for adjusting the stock for your material with serial number ,kindly consult with MM person on this.which may forbid the order for issuing the components
regards
thyagarajan
Maybe you are looking for
-
Hello Hello- I want to connect all of my computers together but over the years I must have created 2 accounts. Is there a way to merge accounts or sign in in all of them the under the same account.
-
How can I get high quality video that will play on my Touch as well as ATV?
Within iMovie there are output settings for the iPod and for the Apple TV. Now I fully understand the video resolution restrictions of the iPod Touch, so I am happy using a widescreen resolution of 640x360 ("Medium" output setting). What I am not hap
-
Revision: 3897 Author: [email protected] Date: 2008-10-26 17:10:00 -0700 (Sun, 26 Oct 2008) Log Message: BLZ-266: Ajax FABridge doesn't pull in channel info for messaging destination (merge branch changelist 3896 to mainline) qa: yes doc: no bug: BLZ
-
Copy/paste a group of finder names
hello, in the old days (sys 9 and earlier), i was able to select a group of files in the finder, copy the names as text and paste into something of my choice (email text editor, etc). when i do this now, the items themselves are pasted into my email
-
I am trying to udate my ipod software to ios5 but it says it will delete all of my media
i am trying to update my ipod software to the new ios5 but when i click update i get a message that says, updating it will earse my media. it tells me to apply it to the computer. what do i have to do to fix it.