System status requirement in Threshold value formula

Hi Pals,
Kindly let me know how to use system status in the threshold values creation. just i will let u know what is my requirement
System status = Created & (Planned date is less than 14 calender days).
The problem is, i can't able to use this system status (Created) in threshold values formula

Hi
Check this out !!!
Assuming that SYSTEM_STATUS field is availbale in the threshold Change Formula display.
SYSTEM_STATUS = 'Created' AND SCHEDULED_START < 14
Regards
Senthil
Award points if useful.

Similar Messages

  • Solman Setup system Monitoring alert threshold value for Filesystem issue

    Hi,
    Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
    We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
    But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving  to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
    The same works fine for filessytems if target system OS is unix.
    I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.

    Hi Sonal
    when you want to save the thresholds for only the one MTE you set
    you need to click on
    EDIT
    -> PROPERTIES
       -> USE FOR INDIVIDUAL MTE
    Kind Regards
    Marius

  • System status as per our requirement

    Dear Experts ,
                      Is there option in SAP to use system status as per our requirement.
    For Ex : system should not allow to do CNF after TECO etc etc
    Please anybody put a light on this matter
    Regards
    Keerthan Kumar

    Keerthan Kumar,
    It’s not recommended to change standard system status set up as this can have influence on different SAP modules…
    But coming back to your original question your request could be realized by calling t-code BS22
    Where for system status I0045 – TECO you set business transaction RMVR – ‘Confirm transaction’ as forbidden.  Please see attached print screen.
    Then when making time confirmation system will display following error message: System status TECO is active, Message no. BS013
    Regards,
    Grzegorz

  • CProject 4.0  evaluations - Define Threshold Values

    Hello All
    I need to set the Threshold Values so that the status icons can be showed on the dashboard.
    I followed the installation guide but i wasn't`t so clear for me, the system provides some templates.
    But most of the templates that appears on the 000 client are referred to resource asignment or work accomplishment. At this moment i need to set the alerts by schedule. Meaning that we want to set an alert depending on how far is the real date from the scheduled on task, checklist, etc
    I would like to know if there are any documentation about how to configure this or anybody can give me a hint on this subject?.
    Thank you all in advance for your help
    Regards
    Gaston

    The documentation is a little 'thin' in this area and the 'Define Thresholds' function is a bit strange to use.
    So here's an example:
    Assume that I have created an evaluation that includes planned start date (SCHEDULED_START).
    Create a threshold value based on your evaluation, give it a name and choose 'TASK' for object category (you can leave it blank to mean all objects if you want to)
    Click on the "a/b" button and go into the formula definition.
    In here you build your formula by selecting fields, adding the operators (+ - > < = etc) and entering numbers or strings.
    The example formula below triggers a threshold 5 days after the planned start date where the status is not complete.
    ( Calculated Start Date + 5 ) > Current Date AND System Status for an Object as a String <> 'I1702'
    You can also toggle between this view and the 'Technical' view which allows you to type the formula in directly using field names (example below):
    ( SCHEDULED_START + 5 ) > SYST-DATUM AND SYSTEM_STATUS <> 'I1702' AND TSK_TYPE = 'ZPF_STANDARD'
    Hope this helps
    Paul

  • FM for changing system status in Service Notification

    Hi all,
    I have a tough situation here.
    To change the system status in service notification, the system use "IQS4_CHANGE_STAT_NOTIFICATION".
    CALL FUNCTION 'IQS4_CHANGE_STAT_NOTIFICATION'
      EXPORTING
        i_qmnum                  =
        i_vrgng                  =
        I_CHECK_ONLY             = ' '
        I_SPRAS                  = SY-LANGU
        I_BEZDT                  = SY-DATUM
        I_BEZUR                  = SY-UZEIT
        I_POST                   = 'X'
        I_COMMIT                 = ' '
        I_WAIT                   = ' '
        I_REFRESH_COMPLETE       = 'X'
      IMPORTING
        E_VIQMEL                 =
        E_STTXT                  =
        E_ASTXT                  =
      TABLES
        RETURN                   =
    2 main fields are required; i_qmnum and i_vrgng.
    I am able to provide i_qmnum (as this is the service notification number that i need to change).
    However, i_vrgng is a field in table (TC33-VRGNG). The values in the table does not make sense to me.
    Example. To change the status to NOPR (Put in progress), the FM uses PPM2 or PPM6 for i_vrgng. If we take a look at the table TC33, it doesn't indicate in anyway how NOPR is related to PMM2 or PMM6.
    Is there a guideline (ie, to change status to OSTS, i use a certain value in TC33-VRGNG to run the FM)?
    Please see BAPI_SERVNOT_POSTPONE & BAPI_SERVNOT_PUTINPROGRESS for a clearer picture of what I'm saying.
    Thanks,
    Earl

    Please try using FM STATUS_CHANGE_INTERN for changing System Status as i was not able to find any link between status and the field provided in FM in ur post.
    This FM directly changes system status of any object.But this FM requires System Status Value not Text.
    NOPR, NOCO etc are system texts.The main table for system status  is TJ02T which will give u the status value for the status text.
    For eg NOPR status text will have status value as 'I0070'.
    Reward Points if useful
    Edited by: Pratyasha Shishodia on Mar 14, 2008 11:07 AM

  • Possible to set a system status that has been deleted again

    Hi,
    In the status profile, we have mapped the user status 'Approved' to '  CFAP Approve".
    When we set the status of the transaction to 'approved', the system status of "TBAP To Be Approved" gets deleted in the system (this can be seen from the transaction BS33 by entering the system status CFAP).
    As part of my requirement, I need to be able to allow the user to bring the status of the document back to 'To be approved'.
    The lowest and highest status numbers are set such that the user can set the status of 'to be approved' from a document in the status 'approved'.  The authorization key to set the status of 'to be approved' is also assigned to the user's role.
    However, in the system, I do not see the option of selecting status value of 'to be approved' when I go to change mode of the transaction. Is it because of the fact that 'TBAP' system has been deleted? Is there someway I can allow it again?
    Thanks
    (will gladly award points for useful answers)

    Hello Jaya,
    The problem seems to be caused by the lowest/highest status number set in the user status profile.
    Based on the rules and user status profile settings:
    - The status currently active determines the upper limit of the subsequent status.
    - The status with status number which was the highest one ever active for the object determines the lower limit for the status number of the subsequent status.
    For example, if there is the status profile set as following:
    Number   Status     Lowest    Highest
    10           AAAA     10            40
    20           BBBB       30           40
    30           CCCC       20           40
    40           DDDD       30           40
    Whent status DDDD is set on, then CCCC and DDDD should be available in the drop down list.
    Once you move back to CCCC, now the lowest and highest allowed status is 30(from DDDD's lowest)~40, so you will not see BBBB in the drop down list.
    I hope this could be helpful.
    Best regards,
    Maggie

  • Adding threshold values in an existing query

    Hi All,
    I have to update an existing query.
    The original query gives me the value of Debtors to sales ratio for each division (DTR value).
    Now, I want that for each division, there be a threshold value which should be compared with the debtor's value and if found higher than the threshold, the result should be in red.
    The result being in red can be done at the front end, which in my case is Cognos.
    But to store different threshold values for diffrerent divisions and then compare them with the debtor's values of the query, do I need to have a separate cube wherein I should store the divisions and their threshold values?
    Or how can I go about it?
    Thanks and best regards,
    Sharmishtha

    Hi Nagesh,
    I do not have those values in the system but will be getting as external data only.
    Divisions and debtors are separate info objects.
    I have 12 debtors KFs (for 12 months) which get filled by an APD (data source is a query).
    So, my final query has divisions in the rows and 12 debtors in the colm.
    So, now i'll be given some threshold debtor value for each division which I need to bring in the query as a KF which can be compared in the query output.
    So, what you suggested will it work in this requirement?
    Also, can you elaborate on the method I need to follow?
    Thanks a lot,
    Sharmishtha

  • PS-Relationship between the system status in wbs elements and activities.

    Relationship between the system status in wbs elements and activities.
    We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
    The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
    Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
    Thanks in advance.

    Hi Bala
    Yes, you have put it rather correctly.
    We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
    I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
    I hope it's clearer now.
    Vinitha.

  • Validate the user and system status

    hi sap,
    i have a requirment where i need to validate
    if system status = ( ISTAT = 'I0002' AND " released
    ISTAT = 'I0098' AND " create
    ISTAT = 'I0119' ). " active
    if the system status ( ISTAT = I0119 Which is ACTIVE then
    it should CHANGE the user status.
    if the system status ( ISTAT = I0002 Which is RELEASED then
    It should NOT CHANGE the user status.
    if the system status ( ISTAT = I0098 Which is CREATE then
    It should NOT CHANGE the user status.
    I have and internal table like this but i dont get the data what is the worng can you pls tel me where i went wrong
    how do i validate the above formula?
    data:begin of wa_itab,
    spras TYPE tj02t-spras,
    istat TYPE tj02t-istat,
    end of wa_itab.
    data: sys_itab like standard table of wa_itab.
    SELECT spras
    istat FROM tj02t
    INTO TABLE sys_itab
    WHERE spras = 'E'
    AND ( istat = 'I0002' AND
    ISTAT = 'I0098' AND
    ISTAT = 'I0119' ).

    Hi ,
    Use this.
    DATA:BEGIN OF wa_itab,
       spras TYPE tj02t-spras,
       istat TYPE tj02t-istat,
      END OF wa_itab.
      DATA: sys_itab LIKE STANDARD TABLE OF wa_itab.
      SELECT spras
      istat FROM tj02t
      INTO TABLE sys_itab
      WHERE spras = 'EN'
      AND istat in ('I0002','I0098','I0119').
    Regards,
    Vijay

  • ECR/ECO Authorization on system statuses - Coding help requested

    HI PLM Gurus,
    Unfortunately ( or that ,,,Iam not aware of)There is no SAP standard Authorization object to control a user setting a particular system status in ECR/ECO. This means by SAP's standard functionality any user who is authorized  with authorization objects  ECM_REQ and ECM_ORD  in their role  and all activities allowed, can set any statuses in ECR /ECO.
    But typical business requirment in any change management requires the control status wise and so do we have one.
    We knew this can be achieved by a custom authorization object. We have created a manual object  but need help with coding to get the current status of the object for matching the authorization (allowed) values .
    Any help is appreciated.
    Thanks,
    Satya

    Thanks Pranav,
    Just to clarify ,I knew about the exit  and  Iam using the same exit, I was trying to get help on the coding part . Identifying Exit is not a problem .( we have used this exit a number of times for different requirements in ECM, like checking the lab/office field for an object before setting a system status , defaulting a  new version of document  etc)
    Update : Got a parameter ( a dynamic field value)which helped us code very easily
    ,,,,Can share with you .
    For system level authorization checks ,one can use Digital signatures and this might be the reason for not having(SAP not providing) a standard authorization object for "system status check "in Standard SAP ECM Authorizations.
    Thanks a bunch for the response.
    Rgds,
    Satya.

  • System status not get updated.

    hai any one can help me in this pls
    my client created sevice orders in crm system and in these some details are reflected in to mobile client.There is integration between in CRM & Mobile clients.
    present requirement is system status is not get updated.
    user status is released.but in system status showing like 1) open  2) contains error. This is occure for some sevice orders  which are created in perticular transaction type  for suppose if my client created 1000 service orders in that 200 or 250 orders status not get updated.
    Because of  this the followup document is not created.
    For temparary pupose to overcome this issue we are doing like this. There are two mandatory fields are there in that any one delete and reenter the same value then automatically the system status get updated in to release status.
    where the problem whether  is in configuration or it is in system
    or it is some technical. Before its worked properly recently they got this issue. How can i overcome this issue permanently.

    Hi
    The status of a sales transaction, saved in CRM Enterprise must be without errors so that it can be transferred to the mobile client
    Sales transactions with errors can be transferred from the mobile client to CRM Enterprise.
    Check the table CDBD_STATUS
    Reward with points if helpful
    Regards
    Manohar

  • Linking the system status to user status.

    Dear all,
    In the customising we have the provision of creating user profile. My requirement is if the system status is having a certain value like ESTO - in the equipment master then this should automatically set the defined user staus and prevent user from modifing the record (equipment master) and when the system staus is changed as AVLB, then the user status should also change and permit user to modify the record.
    Experts help is expected.
    Can anyone suggest any method of adopting the same - is there any settings for this.
    Regards,
    M.M

    I was able to get the statuses in a table , and as theer are more than one entry fo each of teh WBS so I need to concatenate the systme statuses together and user statuses togerher and finally concatenate the user status and system staus togehter in one field .
    SO like fo system status I ahve 3 entreis , I need to concatenate them into one . But somehow when I loop and try concatenating them only the last entry is registeredd and similary for the user status too . Is there a= way I can concatenate so all teh three entries show in like a string
    Right now the system status are AVEC, CTRD, SYST in my internal table as three values , how do i concatenate them into one string?
    Thanks

  • I want all system status for all process orders in COR3

    Hi All,
    I have small requirement below:
    In COR3 tcode after we enter Process order as input, in that screen we can see in 3rd row, System Status and User Status,
    Where all these system status and User Status are stored,
    How we will get these msgs?
    Please help me on this....
    Sri

    Now  i have verified in productin box, i am getting more than one STATUS in JEST for OBJNR , with this value i am getting more than one values, but here i am facing again one more issue:
    in T02JT table i am getting some set of status(in table i am getting 10 values) but when i have verifed in COR3 tcode for that particuler order i am able to see only 8 system status...what about remain 2 ?
    in T02JT table i tried all options as i put X for status with out X, i tried all options..
    Please help me on this...
    One more this is i need User Status's also...? how we can will get these values also..
    Sri

  • Tables fields where the system status is getting stored

    I need to find out the Quotes which have open and completed system status.
    Once I find these orders I need the check the validity dates of the Quotes.
    Can experts please let me know the tables where the system status and the validity dates are stored?

    Try TJ02
    It contains the System status ISTAT.
    Kindly execute the report CRM_ORDER_READ.
    This is a report for executing the FM CRM_ORDER_READ.
    provide the transaction ID or guid as teh input.
    Check the ET_STATUS and ET_APPOINTMENT tables which contain the details required.
    In the table ET_STATUS search with the header GUID.
    The values with I are the system status and the value with E is the user status.
    Explore the result of this report to get more detail.
    Regards,
    Taher

  • Preference determination threshold value valid to date

    Hi All,
    We have an issue with Preference threshold value valid to date for many materials. As per our understanding the threshold value to date should be 31.12.9999 for all materials, but many materials valid to date is ended with 3rd Aug 2011. We are not very sure how the system determined valid to date as 3rd Aug 2011 instead of 31.12.9999 for specific materials.
    Many C-LTVD's status is negative instead of positive due to wrong valid to date. The issue is in production system, not able to correct already issued C-LTVD's since revocation is not possible from negative to positive. Planning to re-issue manually prepared C-LTVD's to customer for impacred part numbers.
    Any idea what is teh root cause behind setting up the threshold value valid to date as 3rd Aug.
    Regards,
    Lakshmikanth

    Hi Jasmit,
    The issue not resolved yet, no idea what happend in the system for to date of threshold value validity.
    We provided report to list out of such part numbers and rectified manually.
    Thanks
    Lakshmikanth

Maybe you are looking for