System Status "SETT" of Production Order is not appearing

Hi Friends
Production Order is not achieving system status of "SETT" even after settlement of an order resulting in incorrect output in Order informatiojn system.
Please let me know the possible reasons for the same.
Thanks
mahesh

Hi Mahesh
Please remove the tick in the check box no display in BS22 transaction against SETT status .
regards
Ranga
Message was edited by:
        Ranganathan Srinivasamurthy
Message was edited by:
        Ranganathan Srinivasamurthy

Similar Messages

  • No System Status Saved In Production Order

    Hi PP Gurus,
    We encountered a short dump when display production order.
    I have checked the system status of this production order from database, and there is NO record in table JSTO, JEST, etc.
    Why the status has not been saved in production order? How do we deal with the existing production order without system status?
    Appreciate any input here.
    Regards,
    SQ

    Thanks, Marcelo.
    Program ZPSFC008 works well in this case.
    This ticket can be closed.
    Cheers,
    SQ

  • How to change the status of a production order

    Dear All,
    May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
    Thanks and Regards,
    Varun Siddharth

    Dear,
    When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
    If you delete the operation created automatically and then do not have the status HOGAN.
    To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
    Regards,
    R.Brahmankar

  • Production order number not consecutive

    Hi,
        Under the same order under the same number range the numbers generated for production order are not consecutive .
    For eg: A production order 10000351
    the next production order number generated is 10000451 etc...
    why is it jumping ..It would be greatly helpful if anyone can answer..

    Hello,
    Yes, this is a critical problem..
    The Production Order numbers jump from one number to the next number without any logic.
    As you sais, for eg. after XXXX1234 it will jump to XXX1241, and for the very next order tha order number may be XXX1452..
    This is because of the Number range buffer which we maintain in "SNRO" (Prod. Order - AUFTRAG)..
    Edit --> set Buffer -- > Main Memory.
    Reduce this buffer to the Minimum and test this in your Test System.
    For further details carefully gothrough the Links below.
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/b4/185f28179c4f3cb8d00988cd139500/frameset.htm
    How the Number Range Buffer Works:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/95/3d5540b8cdcd01e10000000a155106/content.htm
    Administration of the Number Range Buffer
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/aa/dbc9b4b56143bb8f2ae909d7d040fa/content.htm
    Hope this helps..
    Regards,
    Siva

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • Display the status of the production order

    Hi Friends,
    I have a task which should display the status of the production order.
    If an order number(AUFNR) is given, it should display whether the order is available or not. Also it should display the status of the order whether it is delivered, completed, blocked etc.
    Can anyone send me the code for the above task.
    Waiting for ur reply.
    Raj
    Message was edited by: Craig Cmehil

    Please mark this post as "Solved on my own" as it is a duplicate of your post which has already been answered.  Thanks. 
    Also, please remove the email address from the subject line.
    Regards,
    Rich Heilman

  • A FM or BAPI to update the status of a Production Order

    Hello, does anybody know if there is an interface FM or BAPI to update the status of a production order. Specifically I want change the status of PP order to LKD (locked). I want to do it programmatically from an external system.
    Thank you
    Ernesto

    Hi,
    I believe you can use the FM I_CHANGE_STATUS to update the status..
    where JEST-OBJNR = AUFK-OBJNR
    Thanks,
    Naren

  • To get the User status of the Production Order

    Dear all,
    I have a  requiement to get the user status of the production order, This is just below the Status of the Production Order,
    I was able to get the Status of the Production order using the Function Module ( REL MSPT PRC ) etc
    Can any body please help me in fetching this data.
    with rgds
    Ranjith Singh

    Dear,
    Please try with,
    FM 'STATUS_TEXT_EDIT'
    Or See function module PM_ORDER_DATA_READ
    The status maintenace is done by SAPLBSVA
    Use the Tables are :
    JEST - Pass OBJNR of the Production ORDER (AUFK, AFKO tables)
    or from
    TJ02
    TJ02T
    Please take help from technical consultant.
    Hope it will help you.
    Regards,
    R.Brahmankar

  • STOs and Productions order are not lined up. Dates are off

    Hi Experts
    I have a production order and STO with different dates. I would expect no gap between Prod order and the STO. I have checked Planned delivery time,GR/GI at both supplying and receiving plant . Everything looks fine. Please Advice

    Ganpath,
    In general, both of those objects are executables.  In most applications, the relationship between the dates of STOs and the dates of Production Orders is not directly determined by the software,  It is only through careful design and execution of the overall process that you achieve dates that line up; assuming, of course, that is your business requirement (not everyone wants dates to line up).
    So, it depends upon how these two objects were created.  Can you please describe how they were created?
    Best Regards,
    DB49

  • Sales order does not appear in MD04

    Hello,
    One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
    2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
    Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
    regards
    sachin

    Hi sachin,
    what planning strategy group is your are using.
    I assume plan stg grop is 20.
    Normal settings for 20 Paln stg grop in material master.
    1.Item category group (such as NORM) on the Sales Organization screen
    2. Set Plan stg = 20 at Mrp View.
    Requierment type fo customer requirement  = KE  assigned  for planning strategy 20 at customizing.
    For 20 plg stg  requiremnt type is   customer requirement type only.
    with above settingsif create sale order it will appear at Md04 before MRP run.
    u can see the customer requ type at "procurement tab "of sale order.
    For planning of material u have to maintain valid MRP type at Mrop view.
    i am not clear about ur second question.
    please comeback
    Regards
    Pradeep

  • Credit Card number entered CRM sales order is not appearing in R3 Sales ord

    Hi,
    We are entering our Sales orders in CRM which are gtting replicated to SAP R3,In the credit card scenario ,In some sales orders entered in CRM,where the Credit card numer has been entered,In some cases,the card numer is not appearing in R3 Sales order either in the overview screen or Payment card tab,due to ehich most of the times these cards fail authorization .
    Kindly let me know as to what could be the reasons as to why the card numer seen in CRM is not appearing in SAP R3,sales order?
    Appreciate your help on this.
    Regards
    Mohammed Roshan

    Hi All,
    Looking forward to your valuable inputs on this as to  how and why Credit Card number entered CRM sales order iwould not appear in R3 Sales order?
    Regards
    Mohammed Roshan

  • Some of the orders are not appearing in KOC4

    Hi,
    While running the trnasaction KOC4, Some orders are not appearing.which are appearing in KKBC_ORD.
    Please guide me how to get the same in KOC4.
    Thanking you in anticipation.
    With regards
    Aniruddha

    Some pages may not have all the fields in the xml even though they are being shown on the UI.
    Possible reasons I can think of are:
    1) Beans are rendered dynamically through controller code
    2) Page is using regions or other pages by extending them. There is Extends property in Property Inspector and if filled, those attributes from the extended page can also be seen.
    3) Personalization to add elements on the page
    -- Thanks

  • I have a MacBook Pro. When I go to system preference, the external speakers option does not appear in the Input tab. Help?

    I have a MacBook Pro. When I go to system preferences, the external speakers option does not appear on the input tab and, of course, the external speakers do not work. Help?

    When you plug headphones in, or external speakers, where it states "internal speakers", it will rename that "headphones", say. Unless you are running an external sound card.

  • Delivery Date not Set in Production Order

    Hi,
    I am trying to settle a MTS (make to stock) production order that is both CNF and DLV. When I try to calculate variances, I get a KV 239 message stating that the delivery date is not set. I set this order to TECO and went to recalculate WIP but the production order cannot settle because this error still remains. When I drill down on the error, it states that there was an error in the program which set this order to DLV status, when no delivery date has been set. I can't see where this is looking for the delivery date. Has anyone come across this issue and if so, how would I go about correcting this?
    Thanks!

    Hi Team,
    Looks like it is not a common problem probably you need to look out for any OSS notes.
    Any you can check the Delivery date of the order by
    1. In the order display mode CO03 hit the "I" - Status Information Icon which on the right side where order status is displayed. Now system should take you to the Display status screen, here place your cursor on the "Delivered" text and go to the menu bar : Extras-->Change documents-->For Status, now system will display when the DLV status was set.
    Other option.
    2.In the order display mode CO03 use the menu Goto--->Documented Goods Movment. Now system will display all the goods moved against this order select the last GR-101 movement and double click the line, now system should take you to the Material Document in this check the posting date... that should be the delivery date.
    Regards,
    Prasobh

  • Delivery Date not Set for Production Orders

    Hi,
    I am trying to settle a MTS (make to stock) production order that is both CNF and DLV.  When I try to calculate variances, I get a KV 239 message stating that the delivery date is not set.  I set this order to TECO and went to recalculate WIP but the production order cannot settle because this error still remains.  When I drill down on the error, it states that there was an error in the program which set this order to DLV status, when no delivery date has been set.  I can't see where this is looking for the delivery date.  Has anyone come across this issue and if so, how would I go about correcting this?
    Thanks!

    Sorry, posted in the wrong forum.

Maybe you are looking for

  • Error while starting application server

    Hi, I've installed SAP NetWeaver 7. Abap Trial Version. I can start AS by using MMC but server stopped after 1 minute so that I can't log on. (color is not green as Manfred Lutz wrote in his blog but yellow!) pls look here for detailed info http://ww

  • CREATING A PDF THAT OPENS TO 'FIT IN WINDOW'

    Using InDesign (I'm CS2) is it possible to create a pdf with a default setting so that no matter who opens it (with Acrobat) it will open to 'fit in window'? Is this a creator defined attribute? I know that one can set their preferences in Acrobat so

  • Update broke me AGAIN.

    Anyone know when Apple is going to fix the wifi problem inYosemite? I'm using my $10 netbook now as my Macs are screwed......and so am I....AGAIN.

  • Flyout panel populating selections from state to state selections

    I am looking at having states that offer selections. Once each selection in each state is selected such as a radio button that selection would populate in a flyout panel that would be in each state. You would then go onto the next state and make your

  • Creating JDBC Datasource without Console

    I am new to WebLogic. Currently, getting up to speed with WebLogic server 10.3. I can create a JDBC pool from the console. Is there a way to create the JDBC pool without using the console? Also, is there a way that we can create the JDBC resource dur