System still sends ping after set outbound traffic to block

hi friends
i win 2008 R2 , i found that when i set firewall state outbound traffic status to block (in All 3 profiles including domain, public, private), still system can ping other systems (although even there is no ICMPv4 echo request Allow rule).
where from this setting is applied? where from can we change this exception so that also ping (outbound ICMPv4 echo request) be blocked.
thanks in advanced

Hi,
According to your description, my understanding is that you want to block outbound ping packet.
I suggest you to new an outbound rule to block ping packet. Steps reference below:
In the Windows Firewall with Advanced Security console tree, select and then right-click
Outbound Rules, click New Rule.
On the Rule Type page, click
Custom, and then click Next.
On the Program page, click
All program, and the click Next.
On the Protocol and Ports page, in the
Protocol list, select ICMPv4 and then click
Next. (By default this will block all types of ICMP, or you can click
Customize to specify the type)
On the Scope page, choose the IP address which this rule reply to, and the click
Next.
On the Action page, click
Block the connection, and the click Next.
Select the profile and define a name for this rule, and click
Finish to save the rule.
After creating this rule, try to ping, check to see if this rule works.
Best Regards,
Eve Wang
Hi Eve
please read my question again more carefully.
i have not asked how to create an outbound rule to deny ping ! definitely i know that. my question is something else

Similar Messages

Still sleeping even after setting Energy Saver to Never

I'm trying to use my 2.53 GHz (Late 2009) MM as a server but even after setting the 'Computer sleep' preference to 'Never' in the Energy Saver System Preferences panel, the MM still goes to sleep. This isn't a big issue for me since I can and have used Wake On Lan apps/scripts, but it's a major pain in the you-know-what for other people who need to access this server over the internet.
Could there be some persistent overriding preference somewhere that is allowing this MM to go to sleep when in fact it should not be because of my setting? I've searched but can find anything.
TIA for any help with this.

Interesting... I had an EyeTV that I did install on an older G5 PowerMac that I stopped using before I migrated to this MM back in March. I'll check to see if the EyeTV app was also migrated over and uninstall it if necessary.
I would have thought that the EyeTV software would default to a "Never Sleep" state considering it's purpose. I'll check this possibility out when I get home after the long weekend.

TS2621 Home mail system cannot recieve emails after setting up new iphone?

I just set up the email on my new iphone....but after doing so...I'm no longer able to recieve emails on my home MAC?

Take a look at this article, you may need to contact your email provider if you use an email service other then those listed:
HT 4810 iOS: Setting up an email account
If you do need to contact an email provider for the server information, this document specfically states what infomration you need to obtain.

I cant send email after setting up my company email address on my iphone 5

please help...

Again, you may need to figure out all of the settings from the boss then. This error is what you get if the SMTP server recognizes that you are on a network away from your work network and it considers sending mail that way as relaying and rejects it. The SMTP server uses some type of authentication to determine that you are authorized to access the server. When you set up the mail account, a couple of the entry areas say Optional. This is not for all SMTP servers. You need to make sure that you have entered your username and password in all of these areas. You can go back into your account section and select the SMTP server and modify if necessary.

Send email after setting Order block for customer

Hello experts,
is it possible to send an email to the sales manager when the flag Order block ist set
to a cusotmer ?
Our sales representative want to know when there is set a customer to Order block or
Deliver block, and therefor a mail should be sent automatically to the sales represenative.
Is there an event/user exit for doing this ?
Thanks Gerd

No need for user exits. Use output determination with medium = 5. You may want to create new output condition table with order block as part of its key ( you may need to extend output field catalog) along with whatever else you need. Do the usual output determination configuration.
The other thing you will need to deal with is you will have different sales managers responsible for different customers. This will likely mean that you will also have to do some partner determination configuration so that the sales manager responsible is available to the sales order.
Create output condition record for the new output type. Also get Basis to setup SAPCONNECT to send email out via SMTP.
That should do it
Frank

After Mavericks download iCal doesn't work, still - sending calendars to server.... nothing more, please help what to do Tx

after Mavericks download iCal doesn't work, still - sending calendars to server.... nothing more, please help what to do Tx

I had some initial problems with iCal too. At least for me deleting the prefs file solve them. The file is: com.apple.iCal.plist and it is in your Library/Preferences folder
The other thing your problem appears to be connecting to the server is to quit Calendar and then open System Preferences, select the Internet Accounts, and toggle off the Calendar checkmark of each of your calendar accounts. Quit System Preferences. Start the calendar. Since you've turned off the calendar server accounts there should be no beachballing. Quit, return to System preferences and re-enable one calendar account at a time. (This assumes that you are using more than iCloud Calendar) and then start Calendar again. And finally, for one particularly obnoxious iCloud issue I wound up deleting my iCloud account in System Preferences and then recreating it. (Same account name, etc, I just killed the account on my computer so I could start out with fresh preferences).

Can i still send my iphone in for a repair after 10 days?

Hi Guys
Sorry if this is in the wrong section.
Does anyone know if i can still send my iphone in for a repair more than 10 days after receiving my packaging from apple as i noticed on the confirmation email it says if you dont send the phone back within 10 working days the repair will be cancelled. however when i go into my repair status on apples website it is saying my repair is still active.
Could i still send the phone back even though its been almost a month since i got the packaging?
Thanks in advance
Alex

Probably. However, I'd call first just to confirm.

Checking sender and receiver queries after setting up in rsbbs

Hi,
After setting up sender and receiver queries in RSBBS, how can we find out which query is sender and receiver query, If we know any query, can we know whether it is sender or receiver query. then, based on this can we find out sender query if it receiver query and can we find out the receiver query if it is sender query.

Hi Venkat,
We have these tables to know the diffenent receiver queries of a sender and different senders for a receiver RSBBSQUERY & RSBBSQUERYDIR.
Thanks,
Sathish.

Parameter field still editable after setting flag 'PropFlags_NotEditable'?

Hi,
Parameter field still editable after setting flag ‘PropFlags_NotEditable’?
I have defined a step type with a string parameter. (MyParameter). This parameter field has to contain custom generated data, stuffed from a code module.
I want to have ‘MyParameter’ read only for all instances of the step in my sequence.
I have set the property flag ‘PropFlags_NotEditable’ for ‘MyParameter’ in my step type definition, because I want to have this parameter read only in all instances.
When I try to edit ‘MyParameter’ field in an instance of the step in the sequence in the variable pane ‘Step’ - ‘MyParameter’, it still works?
What is wrong here, I suppose this should work?
Best regards

1) Make sure you have show hidden properties turned on in the station options, preferences tab.
2) In your step type expand the variables to the place where the expression is stored for the parameter argument. In the .NET adapter this would be something like the following:TS.SData.Call.Params[0].ArgVal. Right-click on ArgVal and select the Properties menu item.
3) Click on the advanced button and select flags.
4) When the edit flags dialog pops up, click on the Type Flags button.
5) Check the PropFlags_NotEditable flag for the Instance Default Flags section. Click OK on this dialog.
6) If you want the change to effect currently open instances I think checking the "Reset Flags... " checkbox on the edit flags dialog will do this, otherwise this change will only effect new instances of your step type. Press ok on the remaining dialogs.
7) New instances will now not allow editing that value. NOTE: This only works for the sequence editor module panel though. It does not work for the dialog version used by the user-interfaces.
One thing I want to make sure you are aware of for step types is that using a default code module like this has drawbacks versus using postsubsteps. Setting the default code module doesn't keep the user from changing the specification after they insert the step, also updating existing steps if you want to change the prototype is more problematic. You might be better off with a design more like the step types that ship with teststand like the message popup step type (which also ship with source code so you can see how they are implemented) which instead use post-substeps and edit-substeps and instead designate the none adapter for the step type so that the step type can never have a code module. What they do instead is their edit substeps display a dialog that gets the settings/parameters to the operation that the step type performs and stores those as subproperties of the step. Then at runtime the post-substep gets this information and executes the necessary code. Unlike the default code module setting, changing the substeps in a step type automatically effects all existing instances of the step. Changing the code module only effects new instances, and loaded instances if you check the checkbox for that.
Hope this helps,
-Doug
Message Edited by dug9000 on 04-16-2010 09:58 AM

HT5624 my apple id account has been disabled for security reasons. I have re-set my password numerous times but the system still will NOT let me sign in. It continues to say your account has been disabled.

my apple id account has been disabled for security reasons. I have re-set my password numerous times but the system still will NOT let me sign in. It continues to say your account has been disabled.

CALL
1-800-MY-APPLE (1-800-692-7753) let them know and they will helo you enable the account. even if you change the password 50 times the account will stay disable till you call them
good luck

I have set up icloud for the first time on iphone 4 and its still says downloading after 12 hours. Is this right?

I have set up icloud for the first time on iphone 4 and its still says downloading after 12 hours. Is this right?

I think you may not using the right technical terms. When backing up to icloud, there is no way you'd get a message saying things will be wiped. This message may be displayed when you are performing a RESTORE from a backup and then trying to cancel it.
If you are doing a restore, then you can reboot and restore again.

24 hours after setting the erase button on the Find My iPhone option in iCloud the phone was still not erased. Does this function work in a timely fashion?

24 hours after setting the erase button on the Find My iPhone option in iCloud the phone was still not erased. Does this function work in a timely fashion?

No. It functions when connected to the Internet.

Even after setting system preferences to Never accept cookies and having deleted all cookies, Safari continues to add cookies. I've tried to reset safari but the problem persists. How can make safari Never accept cookies.

I'm having a problem with cookies on Safari.
Even after setting system preferences to Never accept cookies and having deleted all cookies, Safari continues to add cookies. I've tried to Reseting Safari several time but the problem persists. This is occurring under two different user logins one of whom is an administrator the other a standard user. How can I get safari to Never accept cookies? This is a recent problem because in the past it used to work properly. Any idea what might be going on here?

Hi David:
I did read (yesterday in another thread) about a similar problem. I cannot test it myself as I accept cookies (from sites I visit) and do not want to delete all of mine for a test.
I do not know whether it meets your requirements, but you could turn on private browsing. I use that (or Microsoft's variant on IE) when I use public computers.
Barry

After setting up a new user on my Air, can I still access Setup Assistant to transfer files from my old Mac?

Only after setting up my user account on my new Air do I find out about Setup Assistant vs Migration Assistant. Since, I have tried Migration Assistant - via wireless - twice, to no avail. Both computers (new Mac and old) just stay busy looking for another computer on my network. All I really want to do is move/copy everything from my old Mac to the new Air. Suggestions? Miracles? Thanks!
Clay

You can do it wirelessly, but that will take some time... you could also purchase a Thunderbolt to Ethernet adapter or a Thunderbolt to FireWire adapter. That would certainly be faster. You should be able to purchase either adapter at your local Apple Store or at the online Apple Store.
Good luck,
Clinton

After updating libraries system still needs the old one.

Hi. Almost always when I upgrade library and som other packages, system still needs the old one but at the same time it needs the new one. Like when i updated gnome and libffi, it needs libffi.so.5 and libffi.so.6. When I run gnome-shell with libffi.so.5 I've got:
/usr/bin/gnome-shell: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory
When I upgrade it, new error appears:
/usr/bin/gnome-shell: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory
It happend with more apps. I think something is wrong with my system and i don't know what.

I am using vim in the console but have gvim because it is compiled with X copy/paste support.
/usr/local/lib is empty.
I just updated fully (included a gvim and vim-runtime update).
I deleted the files I added earlier (libffi.so.5, libffi.so.5.0.10).
I've also rebooted.
As you can see below, vim needs both libffi.so.5 and libffi.so.6.
[ismo@it ~]$ ls -l /usr/local/lib
total 0
[ismo@it ~]$ vim
vim: error while loading shared libraries: libffi.so.5: cannot open shared object file: No such file or directory
[ismo@it ~]$ ldd /usr/bin/vim
linux-vdso.so.1 => (0x00007ffff292d000)
libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0 (0x00007f755e1b7000)
libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0 (0x00007f755df04000)
libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x00007f755dce2000)
libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x00007f755da97000)
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x00007f755d849000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007f755d555000)
libSM.so.6 => /usr/lib/libSM.so.6 (0x00007f755d34d000)
libICE.so.6 => /usr/lib/libICE.so.6 (0x00007f755d131000)
libXt.so.6 => /usr/lib/libXt.so.6 (0x00007f755cecb000)
libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f755cb91000)
libm.so.6 => /lib/libm.so.6 (0x00007f755c89c000)
libncursesw.so.5 => /usr/lib/libncursesw.so.5 (0x00007f755c63f000)
libacl.so.1 => /lib/libacl.so.1 (0x00007f755c437000)
libgpm.so.2 => /usr/lib/libgpm.so.2 (0x00007f755c231000)
libdl.so.2 => /lib/libdl.so.2 (0x00007f755c02d000)
liblua.so.5.1 => /usr/lib/liblua.so.5.1 (0x00007f755be01000)
libperl.so => /usr/lib/perl5/core_perl/CORE/libperl.so (0x00007f755ba87000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00007f755b86b000)
libc.so.6 => /lib/libc.so.6 (0x00007f755b4ca000)
libpython2.7.so.1.0 => /usr/lib/libpython2.7.so.1.0 (0x00007f755b111000)
libruby.so.1.9 => /usr/lib/libruby.so.1.9 (0x00007f755acfe000)
libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0 (0x00007f755aaf1000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00007f755a8ea000)
libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x00007f755a6c7000)
libcairo.so.2 => /usr/lib/libcairo.so.2 (0x00007f755a3c3000)
libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x00007f755a077000)
libpangoft2-1.0.so.0 => /usr/lib/libpangoft2-1.0.so.0 (0x00007f7559e4a000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x00007f7559c14000)
libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x00007f7559a10000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f75597fd000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0x00007f75595f2000)
libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0x00007f75593ef000)
libXi.so.6 => /usr/lib/libXi.so.6 (0x00007f75591e1000)
libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x00007f7558fd8000)
libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x00007f7558dce000)
libXcomposite.so.1 => /usr/lib/libXcomposite.so.1 (0x00007f7558bcb000)
libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00007f75589c8000)
librt.so.1 => /lib/librt.so.1 (0x00007f75587c0000)
libpng15.so.15 => /usr/lib/libpng15.so.15 (0x00007f7558593000)
libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0x00007f7558391000)
libpcre.so.1 => /usr/lib/libpcre.so.1 (0x00007f7558137000)
libffi.so.6 => /usr/lib/libffi.so.6 (0x00007f7557f2f000)
libuuid.so.1 => /usr/lib/libuuid.so.1 (0x00007f7557d2a000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f7557b0c000)
libattr.so.1 => /lib/libattr.so.1 (0x00007f7557908000)
/lib/ld-linux-x86-64.so.2 (0x00007f755e7e6000)
libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007f75576d1000)
libutil.so.1 => /lib/libutil.so.1 (0x00007f75574ce000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x00007f755721e000)
libpixman-1.so.0 => /usr/lib/libpixman-1.so.0 (0x00007f7556f96000)
libEGL.so.1 => /usr/lib/libEGL.so.1 (0x00007f7556d75000)
libGLESv2.so.2 => /usr/lib/libGLESv2.so.2 (0x00007f7556b70000)
libxcb-shm.so.0 => /usr/lib/libxcb-shm.so.0 (0x00007f755696e000)
libxcb-render.so.0 => /usr/lib/libxcb-render.so.0 (0x00007f7556765000)
libz.so.1 => /usr/lib/libz.so.1 (0x00007f755654f000)
libresolv.so.2 => /lib/libresolv.so.2 (0x00007f7556338000)
libbz2.so.1.0 => /lib/libbz2.so.1.0 (0x00007f7556128000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0x00007f7555efe000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f7555cfa000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f7555af4000)
libX11-xcb.so.1 => /usr/lib/libX11-xcb.so.1 (0x00007f75558f2000)
libxcb-dri2.so.0 => /usr/lib/libxcb-dri2.so.0 (0x00007f75556ee000)
libxcb-xfixes.so.0 => /usr/lib/libxcb-xfixes.so.0 (0x00007f75554e8000)
libxcb-shape.so.0 => /usr/lib/libxcb-shape.so.0 (0x00007f75552e5000)
libwayland-client.so.0 => /usr/lib/libwayland-client.so.0 (0x00007f75550db000)
libwayland-server.so.0 => /usr/lib/libwayland-server.so.0 (0x00007f7554ecd000)
libffi.so.5 => not found
libgbm.so.1 => /usr/lib/libgbm.so.1 (0x00007f7554cc7000)
libglapi.so.0 => /usr/lib/libglapi.so.0 (0x00007f7554a82000)
libudev.so.0 => /usr/lib/libudev.so.0 (0x00007f7554874000)
libdrm.so.2 => /usr/lib/libdrm.so.2 (0x00007f7554669000)
libffi.so.5 => not found
libffi.so.5 => not found

System still sends ping after set outbound traffic to block

Similar Messages

Maybe you are looking for