System stops working pointer turns into a circle and starts again

My system slows down as the mouse cursor turns into a circle from time to time and then starts working again. Things become pretty slow. Shut down and start takes a long long time.

That can indicate a too-full hard drive. Highlight your hard drive's icon and then do "Get Info..." from the Finder's "File" menu. That will look something like this:
"Available" needs to be about 20MB or 15 percent of "Capacity," whichever is greater. If the drive is too full, this article will help you regain space:
Freeing space on your Mac OS X startup disk

Similar Messages

When I open one particular folder to play the games in it the pointer turns into a pinwheel and I cant open the game or close the folder unless I shut down my computer. Never happened before and does not happen with any other folder on the desktop.

why does pointer become a pinwheel when I open one particular folder only and prevent me from opening the apps in it and then keep me from closing the folder unless I shut down the computer completely. I can open all other folders on the desk top without a problem. My game folder never gave me trouble before.

Try this. Open one of your files. The window that contains your picture is named at the top. Command click on the name and you'll see the entire path starting with its name and then moving to the folder, the folder it is contained in, etc all the way to down to the hard drive volume name. This should tell you where to find the folder.

I have a 2011 mini that won't power up. The apple on screen comes onn then turns into a circle with a line in it. Any way to fix it?

I have a 2011 mini that won't power up. The apple on screen comes onn then turns into a circle with a line in it. Any way to fix it? It is running Mavericks on a 1T drive.

First thing, see if it will boot into the Recovery Partition: Hold down Command R at restart.
If it boots up there, then it's likely that the hard drive has failed, or simply doesn't have a working system.
If it doesn't boot up there, then it's likely to be some other part of the hardware.
If it is the hard drive, then this can be replaced. You can find videos showing you how to do this on sites like ifixit.com.
Then you can just restore all your data from your backup. You do have a backup, right?

MacBook doesn't turns into sleep mode and swop doesn't work.

MacBook doesn't turns into sleep mode and swop doesn't work.
Can you help me please. I have a MacBook Pro 8.2. I reinstalled OS X to make swop file working, but it still doesn't work. I reinstalled OS X from Internet recovery.
Start time: 10:31:02 03/15/15
Model Identifier: MacBookPro8,2
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 3 minutes
Memory
    BANK 0/DIMM0:
      Size: 4 GB
      Speed: 1333 MHz
      Status: OK
      Manufacturer: 0x029E
    BANK 1/DIMM0:
      Size: 4 GB
      Speed: 1333 MHz
      Status: OK
      Manufacturer: 0x029E
SerialATA
   TOSHIBA MK5065GSXF
Diagnostic reports
   2015-03-15 Boom 2 crash
   2015-03-15 com.apple.internetaccounts crash
Log
   Mar 15 10:26:10 memorystatus_thread: idle exiting pid 546 [tccd]
   Mar 15 10:26:11 memorystatus_thread: idle exiting pid 547 [nsurlstoraged]
   Mar 15 10:26:12 memorystatus_thread: idle exiting pid 544 [soagent]
   Mar 15 10:26:13 memorystatus_thread: idle exiting pid 548 [nsurlstoraged]
   Mar 15 10:26:43 memorystatus_thread: idle exiting pid 556 [com.apple.CodeSi]
   Mar 15 10:26:44 memorystatus_thread: idle exiting pid 558 [accountsd]
   Mar 15 10:26:45 memorystatus_thread: idle exiting pid 553 [com.apple.iCloud]
   Mar 15 10:26:46 memorystatus_thread: idle exiting pid 561 [networkd_privile]
   Mar 15 10:26:47 memorystatus_thread: idle exiting pid 555 [secinitd]
   Mar 15 10:26:48 memorystatus_thread: idle exiting pid 560 [tccd]
   Mar 15 10:26:49 memorystatus_thread: idle exiting pid 562 [secd]
   Mar 15 10:26:50 memorystatus_thread: idle exiting pid 554 [com.apple.intern]
   Mar 15 10:26:51 memorystatus_thread: idle exiting pid 565 [nsurlstoraged]
   Mar 15 10:26:52 memorystatus_thread: idle exiting pid 563 [soagent]
   Mar 15 10:26:53 memorystatus_thread: idle exiting pid 551 [syncdefaultsd]
   Mar 15 10:26:54 memorystatus_thread: idle exiting pid 557 [CoreServicesUIAg]
   Mar 15 10:26:55 memorystatus_thread: idle exiting pid 567 [iconservicesd]
   Mar 15 10:26:56 memorystatus_thread: idle exiting pid 566 [iconservicesagen]
   Mar 15 10:26:57 memorystatus_thread: idle exiting pid 568 [systemstatsd]
   Mar 15 10:26:58 memorystatus_thread: idle exiting pid 550 [cfprefsd]
   Mar 15 10:26:59 memorystatus_thread: idle exiting pid 552 [cfprefsd]
   Mar 15 10:27:00 memorystatus_thread: idle exiting pid 549 [coreduetd]
   Mar 15 10:27:01 memorystatus_thread: idle exiting pid 564 [nsurlstoraged]
   Mar 15 10:28:18 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Mar 15 10:29:09 proc 316: load code signature error 4 for file "Boom 2"
I/O per process: coresymbolicati (UID 0) is using 15 MB/s
kexts
   com.globaldelight.driver.Boom2Device (1.1)
Daemons
   com.apple.installer.osmessagetracing
Agents
   com.apple.AirPortBaseStationAgent
   com.globaldelight.Boom2Daemon
Extensions
   /Library/Extensions/Boom2Device.kext
   - com.globaldelight.driver.Boom2Device
   /System/Library/Extensions/EPSONUSBPrintClass.kext
   - com.epson.print.kext.USBPrintClass
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
Applications
   /Applications/Boom 2.app
   - com.globaldelight.Boom2
   /Applications/Boom 2.app/Contents/Library/LoginItems/Boom2Daemon.app
   - null
Bundles
   /Library/Printers/Canon/BJPrinter/Plugins/BJNP/CIJNetworkIOM.plugin
   - jp.co.Canon.ij.print.iom.CIJNP
   /Library/Printers/Canon/BJPrinter/Plugins/BJNP/CIJNetworkPBM.plugin
   - jp.co.Canon.ij.print.pbm.CIJNP
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/BJUSBIOM.plugin
   - jp.co.canon.bj.print.bjusbiom
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/BJUSBPBM.plugin
   - jp.co.canon.bj.print.pbm.USB
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/CIJUSBClassDriver.plugin
   - jp.co.canon.ij.print.CIJUSBClassDriver
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/CIJUSBClassDriver2.plugin
   - jp.co.canon.ij.print.CIJUSBClassDriver2
   /Library/Printers/Canon/BJPrinter/Plugins/IJBluetooth/IJBluetoothIOM.plugin
   - jp.co.canon.ij.print.ijbluetoothiom
   /Library/Printers/EPSON/CIOSupport/CIOHelper.plugin
   - com.epson.print.plugin.CIOHelper
   /Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin
   - com.epson.print.plugin.USBPrintClass
   /Library/Printers/EPSON/CIOSupport/XIOP.plugin
   - com.epson.print.plugin.XIOP
   /Library/Printers/EPSON/CIOSupport/XIORemoteClient.plugin
   - com.epson.print.plugin.XIORemoteClient
   /Library/Printers/EPSON/CIOSupport/XIORemoteServer.plugin
   - com.epson.print.plugin.XIORemoteServer
Restricted files: 219
Elapsed time (s): 238

Remove "Boom" and test.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

My iPhone 4s just stopped working - cant turn it back on....whatz up with that???

My TWO YEAR OLD iPhone 4S just stopped working - cant turn it back on....whatz up with that?!

Yep! You could also try to restart the device by holding the power button and the home button down for several seconds might get 'er kicked into gear. Other than that... The Applestore it is!

The apple on the gray start-up screen turns into a circle with a slash.

My G5 has been pretty reliable for the past three (?) years. Lately it's been a bit squirrely booting up--once it went into kernel panic during boot, but powering down and restarting seemed to fix that. Lately, too, when I let the machine run and it goes to sleep I'll come back after a couple of hours to find the fan running at top speed and the machine unresponsive. Yesterday it seemed to have problems booting so I reset the PRAM and NVRAM and ran Onyx and it worked fine all day. This morning when I went to boot, I got the usual gray screen with the whirling gear. After about a minute, the apple in the center of the screen turned into a circle with a slash while the gear continued to whirl. How do I fix this?

I've subsequently tried a number of things. I reset the SMU, which didn't help until I also reset the PRAM. Computer booted normally. I rebooted from the Tiger DVD and repaired the start up disk; there were only two small errors to be fixed. The machine booted normally (and pretty quickly) for about a week before the problem resurfaced. I again went through the first two steps and got things working once more.
Lately the problem has returned. First, resetting the PRAM didn't help; only resetting the SMU worked. At the last event I needed to reset the PRAM without resetting the SMU. When I get home tonight I'll try booting from the DVD and repairing the permissions on the start up drive.
At first, I thought I'd leave it running all night, but when I got to the office in the morning the fans were running at full throttle and the machine was in a coma. All I could do was reboot--which it did, immediately going into kernel panic. I shut it down and rebooted, resetting the PRAM in the process. The computer booted and ran fine all day, although it seems slow (I did have Photoshop CS4 and Lightroom running simultaneously, but I do have 5 GB of RAM).
It's been suggested I may have a corrupt RAM chip (computer doesn't chirp at me, as I'm told it would) or, more terrifying, a processor is about to check out. I also have an ATTO SCSI card in this to run a legacy scanner. Could that be a problem?
Any advice?
JP

My iPhone 5 charger stopped working. It's under warranty and I want to send it back. How do I initiate that process? The website keeps sending me in circles. I'm getting an error message when I put in my serial number. Why is this so difficult?

My iPhone 5 charger stopped working. It's under warranty and I want to send it back. How do I initiate that process? The website keeps sending me in circles. I'm getting an error message when I put in my serial number. Why is this so difficult?

If posible you will find visiting a store by far the simplest way of getting a solution
Which Country
are you in ?
Have you checked the lightning socket on iPhone doesn't have lint or fluff in it
solves majority of such issues

All icons on my Macbook have turned into blue circles?

All icons on my Macbook have turned into blue circles. Please help.

Might be corrupted Safari preferences...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Safari/WebpageIcons.db
Click Go then move the WebpageIcons.db file to the Trash...
Quit and relaunch Safari. Webpage icons should reflect the sites you visit now.

Catalyst control system stop working

recently i upgrade my laptop from windows 8 to 8.1 my laptop is hp pavilion e015tx after updating operating system when i try to open "configure switchable graphics" or " graphics properties" it will not open and give message "catalyst control control system stopped working"
please help me some one

Hey @prakhar12 ,
We meet again!
The CCC software may need to be updated to work on Windows 8.1.
Please try installing the most recent version from the HP website here: AMD High-Definition (HD) Graphics Driver.
This package contains the drivers for both the Intel and AMD GPU so that your switchable graphics will work in Windows 8.1.
Let me know if that helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Ibook that will not boot (apple turns into a circle with....

my ibook was clicking the other night. it has already been through the logic board recall. this appears to be the hard drive. after tech tool pro, the disk utilities, etc., and all of the alternate startup sequences, i now have an apple that turned into a circle with a slash through it (a do not allow type of symbol). i bought a new drive today and after reading many forums today, i am wondering if there is a recall, warranty or if i should send it in the my local store to get fixed or just do it myself tonight. any advice anyone?

Well, since I don't know your level of expertise, it's hard to advise you. Take a look at the online instructions:
http://www.pbfixit.com/Guide/50.12.0.html
http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm
and see if you think you are up to the task.

I always leave my iMessage on. It stopped working so I shut it off and turned it back on. The switch says on but it won't activate.

I always leave my iMessage on. It stopped working so I shut it off and turned it back on. The switch says on but it won't activate.

Imessage js between ios devices and macs only.
Ipads do not send sms as it requires a connection to the voice channel of the cellular service.

My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

Plug it into the charger/wall socket and let it charge for at least an hour. It just might start charging. If you have already tried charging it for a fair amount of time and it didn't work, try restoring the device with iTunes.
iOS: Not responding or does not turn on - Apple Support

My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...

My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...

ok turn it off manually and turn it back on while holding the apple logo bottor or the function botton this will give you an option to choose if you want to startup with osx ow windows. let me know if this works
<Email Edited By Host>

Photoshop CC 2014 stops working after less than 30 second and shuts down

I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

You have not provided any system information or crash logs, so we can't really know.
http://myleniumerrors.com/working-with-your-operating-systems-tools/
Mylenium

Update to 10.6.8 and HP F2100 and D2400 Printers stopped working. Restored 10.6.7 and printers from Install CD's but not working, Same with scanner

Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
Steve

None of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers.

System stops working pointer turns into a circle and starts again

Similar Messages

Maybe you are looking for