System tells me quicktime not installed when trying to update to CC

updating to CC; takes a long time then I get an alert to say quicktime not installed, so some features will not be available. If I click to continue, I notice I do not have H264 compression available as a render option, (don't know if this is related!) I'm on Mac 10.8.4 - Quicktime player is installed cheers Alistair

You are seeing two unrelated things.
First, about H.264, see this:
http://forums.adobe.com/message/5426740#5426740
Then, about QuickTime, see this:
http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html

Similar Messages

Why do I keep getting actionlist not found when trying to update to version 11.6.602.180?

WHy do I keep getting actionlist not found when trying to update to update to version 11.6.602.180?

This problem and others are outlined in this help document. In addition, please try installing from the appropriate stand alone Windows installers located here:
Installation Problems - Flash Player - Windows

ITunes goes into (not responding) when tries to update library

How can i get my mac around this problem? iTunes goes into (not responding) when tries to update library

I just posted with the same question

HT201210 what does it mean when it says the firmware file is not compatiable when trying to update

what does it mean when it says the firmware file is not compatiable when trying to update

Exactly what it says.
Is there sufficient free space on the computers hard drive?

The dreaded "Video Error-File Not Installed" When trying to watch LiveTV in WMC

I'm getting the following error message when trying to use Live TV in WMC:
Video Error
Files needed to display video are not installed or are not working correctly. Restart Windows Media Center or restart the computer.
On this system my tuners are the Hauppauge HVR 2250 and the Hauppauge HD PVR. It took awhile to set up, but when I click play on a channel I get 10 seconds of video, an audio loop of the same sound over & over followed by the above error message.
I ran into this problem once before on my Home Theater HTPC when trying to access the ATI Cable Card solution. To get that to work I had to uninstall and reinstall Playready. I tried 3 different ways of doing this on my new build & it did
not fix the problem. The only fix I didn't try was the one on Ceton's website that involves a whole lot of deleting of folders.
Since this current build doesn't have a cablecard installed, and gets the non-clear QAM stations from settop box through HD PVR, would it still be the Playready needing to be reset? The symptoms look identical to when I had the previous problem.
These same files play in the BeyondTV that I'm trying to migrate from, so all codecs appear to be onboard. I am using the latest HDPVR MediaCenter driver from the Hauppauge website & the latest drivers on the HVR-2250.
Thanks for any help!

I had this problem after upgrading my graphics card to an AMD 5450 and the solution after a couple of days of hair pulling was one I hadn't come across before in relation to this problem.
It turned out that the problem was caused by the screen refresh rate, it was set to 60Hz by default and I got the Video Error message but if I changed it to 50Hz then playback of recorded programs or watching live TV worked.

Error : Patch 9.4.2 not installed. when trying to install AcrobatPatchApplication.exe

All is in the titles.
I'm deploying Acrobat Reader and Pro on several thousand of machines, usually without big troubles.
last month I deployed the 9.4.2 update and everything went fine until we discovered the printing problem.
This month I'm trying to deploy the patch, but it seems to not work as expected.
When i run it on few machines with Adobe Acrobat 9.4.2 and Adobe reader 9.4.2 it returns to me the following message in the log file:
03/09/11 11:14:21   INFO              =~=~=~=~=~=~ Start : Acrobat Patching Application.. =~=~=~=~=~=~=~=~=~
03/09/11 11:14:21   INFO              Silent Mode : 1
03/09/11 11:14:21   INFO              Found product : {AC76BA86-1033-0000-7760-000000000004}, installed on the machine.
03/09/11 11:14:21   ERROR             Error : Patch 9.4.2 not installed. Acrobat 9.4.2 patch should be applied before running this executable.
03/09/11 11:14:21   INFO              =~=~=~=~=~=~ Logging finished... =~=~=~=~=~=~=~=~=~
For info : {AC76BA86-1033-0000-7760-000000000004} is the code for Adobe Acrobat Pro 9.4.2 in the registry key.
What's wrong??

Installation howto you can find on http://www.puschitz.com
Try use "Search" function before you create new topic. This one was discussed many times.

Why am I getting a message that iTunes is not installed when trying to access items in IE?

When I am using IE and find an app on the store, then click the button to view in iTunes I am redirected to the download screen. I tried subscribing to a podcast recently as well and got the message that iTunes was not installed on my computer. When I try to do the same actions in Chrome they work fine. Unfortunetly, Chrome does not work well with some of the software my college uses so I would like to get IE functioning fully before classes start back up. This happens even if I disable my firewall. I have tried updating iTunes and I tried uninstalling and reinstalling it. My husband's computer has several itunes plugins in IE but I don't for some reason.

Reset IE to defaults.
Tools > Internet Options > Advanced > Reset

"Update server not responding" when trying to update Acrobat 9 Pro

I just installed Acrobat 9 Pro on my desktop computer and on my laptop. I was able to download and install the latest updates to the copy on my desktop computer (so that it is now version 9.3.0), using Help>Check for Updates.
When I try the same command on my laptop, I get and error message that states "The update server is not responding, which means it may be offline at the moment, or the Internet or firlewall settings may be incorrect. Please try again later." I tried several times yesterday and today with the same error. The message pops up immediatley; it doesn't even seem to actually try to connect.
I disabled my firewall and antivirus software and still get the same result. I uninstalled then reinstalled Acrobat and still get the same result.
I looked online at Adobe.com to see about downloading and installing the updates manually, but it's difficult for me to tell which updates I need. Some are for other languages and some are for 64-bit but I have Windows 7 32-bit.
A call to tech support was no help. The agent seemed to think because I installed verison 9.0 that I only needed the one English update listed on the download page under 9.0, and not any of the later updates. . . And he said that Adobe recommends manually installing updates from Adobe.com rather than using the Check for Updates command (?!).
Anyway, does anyone know what might be causing this problem with the adobe updater? Maybe I need to reinstall the updater (where do I find it?).
OR
Can someone tell me which of the updates listed on the Acrobat dowload page I should manually install to bring my product up to date?
[Running Windows 7 32-bit on both machines]
Thanks.

Hi,
Which version of Acrobat do you have ?
(Launch Acrobat and Go to Acrobat->About Adobe Acrobat menu item and check the version )
Also, can you ping following urls ?
armmf.adobe.com
armdl.adobe.com
ardownload.adobe.com
Are these urls reachable ?
Also, you can check the contents of host file /etc/defaults/host to see that none of the ips are redirected.
One more thing that you could try:
If you have firewall on, could you please disable the firewall and then try the update. Does it works now ?

HT1338 server will not respond when trying to update

The Software Update Server (macupdate.cg.ac.uk) is not responding.
Please help this is the message i get every time i try and update my software now i have an iphone 5 my itunes needs to be updated but it wont because i need the latest software update so i can download the new version of i tunes. I am using Mac OS X 10.6.7 i am running fine on internet and am connected with good broadband speed.
Thanks in advance

You're saying that there is an issue when trying to use Software Update to get to 10.6.8, correct? An alternate way to apply that update is to download the 10.6.8 update from the Apple download site.
Before running it, bring up Disk Utility, repair permissions, apply the update, and repair permissions again when done. With that, you can now install iTunes 7.

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

My App Store does not work when trying to update applications

My Apo store does not work when I try to update applications that need to be updated

There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

HT1600 "The update was not successful" when trying to Update Software on my Apple TV

After downloading for 40+ minutes, it went into step 1 and came back with "The update was not successful". I have it connected via network cable and not wi-fi. Is there another way to update that will get me from 5.0.2 (4250) to version 5.1?
Thanks in advance.

Hi,
same storry here.
I was renting a movie yesterday with my iPad2 (iOS 5.1) - wanted to AirPlay the video stream from iPad 2 to AppleTV 2 (has the latested OS installed on it) - AppleTV says "not authorized"...
Tried also everything (e. g. reconnected AppleTV to my ITunes-account..) - nothing worked.
I AirPlayed a lot of rented movies from ITunes-store over my iPad2 to my AppleTV 2 in the past without any problems....
I have no idear why this happens now...
I was also functioning perfect after the recent iOS-update on both devices. So no connection to the new iOS...
Regards,
Robert

"Some Updates Failed to Install" when trying to update PhotoShop CS5 on MacBook Pro Retina laptop

Is there a way to make the update install?

I too am having the same problem. How is this question not answered? Why is there no explanation for why there was an error downloading the update? MAJOR PROBLEM.

Klist Purge is not working when trying to update a computer security group

I cannot get Klist purge to work on any of our computers. After running the command "klist
-lh 0 -li 0x3e7 purge" I have tried internally and externally using VPN. The computer does not see new security group settings.
Windows 7 Clients.

Try klist -li 0x3e7 purge and then "gpupdate /force" to update the security group membership.

"Quicktime not installed on this system" message when starting up AE CC 2014 for the first time...

Got a "Quicktime not installed on this system some functions disabled" -- or something to that effect -- message when starting up AE CC 2014 for the first time.
I'm on a Mac Pro OS 10.9.3.
Anyone know what I need to install to fix this? I have the Quicktime player and QT plugins for browser, etc... Never had to do anything for AE before.
Thanks!

solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOutput Quic…

System tells me quicktime not installed when trying to update to CC

Similar Messages

Maybe you are looking for