System Timezone and User Timezone change - impacts

Hi Folks,
My question is: Are there any technical impacts on manually changing the System Time Zone and user Time Zone settings when the system is already in production, such as bad synchonization or any other problem?
Thank you all.
Daniel

Hi,
In this case you can create the one more user status as 40 EFG 10 40 1 1and restrict this status by authorisation key.
provide this status authorization to responsible person not for all the users. If SO deletes the responsible person changes the status from XYZ to EFG and then to ABC, from here you can follow regular process.Finally the WBSE status remains
as XYZ.
regards,

Similar Messages

  • IO system status and user status

    Hi all,
    Could you please tell me where the link between IO sys and user status.
    Thank you.

    Hi
    System status and User status:
    System Status
    o        The system sets a system status informing the user that the system has executed a certain business transaction for an object.
    o        You can only influence this status by executing a business transaction that changes the system status.
    o        If you release an internal order, the system automatically sets the Released system status.
    User Status
    o        You can set a user status in addition to the existing system status.
    o        You specify the user status in a status profile, which you create for each order type in Customizing.
    o        You can specify and activate any number of user statuses.
    o        In a production order you can simultaneously
    The system status and the user status influence the business transactions in the same way.
    The status profile allows you to:
    o        Define the user status and document its functions with a corresponding long text.
    o        Assign a status number that specifies the order in which the system reaches the user statuses.
    o        Define an initial status, which is then automatically set when an object is created.
    o        Determine that a user status is automatically set when you execute a business transaction.
    o        Permit or forbid specified transactions, if a status is active.
    VVR

  • How to get system status and user status of service order

    Hi,
    I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
    I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
    Regards,
    Kamesh Bathla

    Hi,
      Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
    Regards
    Srinu

  • Fetching the sales order data using both system status and user status

    Hi,
    Could any one tell me how to fetch sales orders using both system status and user status.
    My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
    For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
    Early replies are appreciated.
    Thanks
    Tanveer

    Hi,
    The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
    Regards,
    Dipesh.

  • System status and user status Priority

    Hi All,
    We have system status and user status for the production order, I would like to know which has higher priority.
    E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then which status has high priority.
    Regards,
    Ranjan

    Hi,
    As per my understanding both the status work together. If User status forbids a business transaction and system status allows it, then also the business transaction cannot be carried out.
    Also if system status forbids a business txn and user status allows that, then also you wont be able to carry out the txn.
    Both work with "AND" condition.
    Regards,
    Rohit.
    Added: you can try it by creating a User status profile. Allow Goods Movement to CRTD status. Now dont release the production order, only save it. Then try issuing goods (261), the system will block you.
    Now, other way round, forbid GR without confirmation. Though System Status allows GR without CNF or PCNF status, but the user status will forbid the transaction.
    Hope the example helps.
    Regards,
    Edited by: Rohit Chauhan on Jun 5, 2009 9:09 AM

  • System status and user status in Line Item Reports

    Dear PS-friends,
    I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
    I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
    Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
    In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
    Has anybody an idea how it works to show the system status and user status in Line Item Reports.
    Thanks in advance!

    Problem is solved.
    I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line.

  • How to get system status and user status ?

    how to get system status and user status for the given production order?
    In which PP table we can
    find these?
    Thanks&Regards
    Satish

    Hi Ram,
    Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
    Alternatively, the following tables store the user and system status info:
    JSTO- Status object information
    JEST- Individual Object Status
    Hope this helps.
    Let me know if u need further information.
    Regards,
    Sonal

  • How to fetch service order with partucular system status and user status

    Hello All,
    How to fetch service orders with specific system status and user status.
    thanks

    I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
    I want to fetch released service orders with status INIT and RENT.
    Here, SYSTEM Status = Released and
             USER Status     = INIT
                                        RENT
    So is there any function module available for the same.....

  • "Failed to connect backend system.Check your system definition and user pri

    Hi Experts,
    I am a BW Consultant working on Portal & Visual Composer (7.0)
    As a Developer i got SAP_ALL & SAP_J2EE_ADMIN roles in BW and System Admin and VC role in Portal.
    In Portal Created/Published iviews for BW Queries (Transaction) and Published them to a role (role1) in portal.
    In Visual Composer i developed Dashboard reports on BW Queries ,made them public and deployed them to a portal role(role 1) in portal.
    I assigned portal role to my self and tested the queries and dashboards in portal everything is working perfectly.
    In VC i can see 3 different systems defined in Portal
    I created a Test user (with profile of end user) in BW,Testuser is authorised to view all the reports in BW and All data in all data targets and in portal testuser is assigned with Role1 and VC Role.
    (Note: In BW Testuser doesn't had J2EE_ADMIN role).
    Portal:
    When i login to portal as testuser and tries to execute the BW Queries (Transaction) and it working perfectly.
    When i tried to execute Dashboard reports developed in Visual Composer it gives me an error
    "Failed to connect backend system.Check your system definition and user priviliges"
    In Visual Composer i logged in as testuser (as test user got VC role assigned) i can't see any list of avaliable systems under "Find Data"
    When i modified testuser profile in BW and updated with SAP_J2EE_ADMIN then i can execute the dashboard report but at the same time testuser got more than what he should have like user admin,system admin...etc
    I searched the sdn and find some similar threads ...but nothing was useful
    Please update me what went wrong and how to fix this...
    Thanks in advance

    Hi,
    Refer,
    Visual composer
    Failed to connect to backend system. Check your system definition and user
    Regards,
    P.Manivannan.

  • Difference between system status and user status.

    Can someone explain to me the difference between system status and user status in details

    Hi,
    As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
    In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
    System statuses will be updated automatically based on business transactions which will be done on SAP.
    For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
    If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
    These user status as per the name, should be updated by the user manually.
    Regards,
    Maheswaran.

  • System status and user status for ECR

    Hello,
    As per our requirement, we have defined some 7 user statuses. We need to link system status with user status
    How to link the user status with system status or is user status needs to be selected manually in every status of ecr
    Thanks.
    Anirudh,

    The user statuses are
    unassigned - workflow is not initiated,
    pending - change is not submitted to analyst who reroute it to change board,
    cancelled - change is cancelled,
    submitted - subimitted to analyst for routing to change board,
    hold,
    released,
    implemented - ECO complete
    We change only Document through ECR.
    We want to link system status to these above user status.
    The user tracks ECR by means of  user status and not system status.
    Anirudh,

  • Clean system cache and user icon

    I am the admin user on my computer and everytime I clean the system cache it reverts the icon of my user to the icon of the system administrator as seen in this picture: http://image.versiontracker.com/scrnsht/48491/155862/190rootUser.png This is just a picture I found to show what the icon looks like it is not my computer as I am the only user on it.
    My question is, how do I keep it from changing? Is it possible?

    is there a way to re-build desktop or any de-frag utilities built in like there used to be.No. There is no re-build desktop, the closet to that would be rebuild directory and you'd need a third party app. There is also usually no need to optimize or defrag in OS X. since OS X defrags on the fly.
    Have a look at Mac 101 or Switch 101 for a good start.
    -mj
    [email protected]

  • System Status and User Status

    HI Team,
    Is there any way by which i can hide or make in display mode my user and system status icon in PM order, which i can do in notification.
    Thanx in advance

    To the best of my knowledge, you can not hide the Icon. But you can restrict the user not to change the status by Authorization key.
    For User status:-
    Create keys by
    SPRO setting
    Plant Maintenance and Customer Service >Master Data in Plant Maintenance and Customer Service>Basic Settings-->Create Authorization Keys for User Status Authorizations
    Assign this keys to your user statuses. Basis will use it for user roles.
    As the System statuses changed by the business transactions, need to find the authorization object (BASIS) and restrict the user.
    [Useful Info|http://www.sapfans.com/forums/viewtopic.php?p=823900].
    Babu

  • System status and user status configuration

    Hello All,
    1. Is it possible for the system to  reverse the user status of WBS element if the actual business transaction is reversed. For example, User status 'ABC' is set as Initial status and in OK02 config, it was set that, when the system status is 'ACPT'( will appear when we create an SO and saved), the user status will be changed to XYZ. But subsequently when the WBS element in the Sales order is removed (by changin SO because of wrong postin), is it possible to the initial active status.
    Here my ok02 config is like this
    stuatus 10 ABC 10 30   1  1
                 20 BCD  10 20  1   1
                 30 XYZ  30 40  1  1
    Here my requirement is once the system sets the status XYZ, the user should not change to BCD. But my above mentioned requirement of reversal will arise when the user wrongly enters the WBS element in the SO.
    Any advice is highly appreciated. Could not find proper solution after enough search.
    Thanks.
    Ram.

    Hi,
    In this case you can create the one more user status as 40 EFG 10 40 1 1and restrict this status by authorisation key.
    provide this status authorization to responsible person not for all the users. If SO deletes the responsible person changes the status from XYZ to EFG and then to ABC, from here you can follow regular process.Finally the WBSE status remains
    as XYZ.
    regards,

  • I have dloaded and reloaded firefox 7 b4 i had firefox 5 now after system restore and proxy setting changes an d default settings fire fox still will not open what am i doin wrong

    ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

    ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

Maybe you are looking for