System Trace for function and programs called?

Hi All
I'm aware of ST05 for tables accessed, but is there perhaps a system trace that would list all the function modules and programs run during a transaction?
For example, I'd like to run such a trace on the Transport Logs button in SE10. I'd like to find a function module that would return a table of entries that exist in the tree list for Dev, QA & Prd. This should highlight if any released transports have not be taken to QA & or Prd.
Thank you and best regards,
Adrian

Hi,
SAP has provided a transactions:
"SAT" which is a run time analysis tool
"ST30" Global performance tool.
Hope this helps
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Dec 13, 2010 2:41 PM

Similar Messages

Is adobe reader, acrobat requires system reboot for installation and upgradation

is adobe reader, acrobat requires system reboot for installation and upgradation?

Hi Rave,
Thanks for your reply.
we have a vulnerabilities scan on adobe systems. it shows as below .
Plugin Name
Remarks
Family
current version
Adobe Reader Unsupported Version Detection
Upgrade to latest version(http://www.adobe.com/support/programs/policies/supported.html)
Windows
Adobe Reader 9.5.5 9.5.5
please tell me how to fix it.
thanks in advance .
Regards,
Harish

No system found for component and Evaluation system in the Project

Hi Folks ,
Im facing this problem when im trying to Execute the T-codes from Solar01 of the Transactins Tab by Selecting the Line item and clicking on Execute button. Following is the Error and there no logs for it.
No system found for component and Evaluation system in the Project
Even i have checked with the RFC settings and Logical components are right
Please do suggest me - This is PRD issue . Try to do the needful .
Thanks in Advance
Amrita
Edited by: Amrita Amrita on Dec 3, 2009 12:53 AM

Hi all,
I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
"No system found for component and Evaluation system in the Project"
But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
Click Copy
This should replicate to all nodes and then you should be able to assign transaction to the business processes.
Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
If not, there is a similar work around which also works.
Go to transaction SOLAR_PROJECT_ADMIN
System Landsacpe Tab
Systems subtab
Click System Role Assignment
Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
Save Project
Go to SOLAR01 and it should reflect it in the Blueprint.
You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
Hope this helps everyone,
-Rohan

Dropdown lists for function and department on BP are sorted by key not desc

Hi,
In the new WEB UI the dropdowns for function and department are sorted by the key rather than the description.
This is causing the users major problems as they usually end up grouped together because of the way they were named.
Can anyone suggest how i can get the F4 help in the WEB UI for department and function so it is sorted by the description.?
Thanks
Matt

Ok here goes....
Department:
UI Component: BP_CONT
View: BP_CONT/ContactDetails
Context Node: RELATIONSHIP
Attribute: STRUCT.DEPARTMENT
Object Type: BP_CONTACT
Attribute: <DEFAULT>
Design Object: BP_CONTACTRELATION
Function:
UI Component: BP_CONT
View: BP_CONT/ContactDetails
Context Node: RELATIONSHIP
Attribute: STRUCT.FUNCTION
Object Type: BP_CONTACT
Attribute: FUNCTION
Design Object: BP_CONTACTRELATION
Hope this gives you enough infoirmation, and thanks for looking into this.
Thanks
Matt.

Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

I have friends all over Europe, does it matter what number they use to call me? Nope! All incoming calls are free for me.
The only time you ever have to worry about which number is if you get charged for incoming domestic/international calls.
You can tag their number (work/home/iphone) and that may show on the CallerID accordingly.
It should show, John Doe
underneath, work/home/mobile
For example:
http://shawnblanc.net/images/img-0009-1.png

Difference between usage of "System -- Services for object" and GOS direct

Hey folks,
i was wondering if you know an answer for that problem:
1) Start ME23N (no SAP Gui classic design!) and go to System - Services for Objects in order to start the GOS Toolbox. Try to to store a business document. In my case i don't have the authorisation S_WFAR_OBJ so i get the Message no. 00398 "You do not have authorization for this function" Thats the behavior a want
2) Start ME23N and activate GOS Toolbox by clicking directly on the button on the top left corner. Try to a store a business document. But there is no message coming up?! Same user, same PO! It seems that the Toolbox is just beeing restartet and thats it.
Same behavior in IW53/IW33 too, no auth error message if GOS is started via "System --> Services for Objects".
Thats our system:
ERP ECC 6.04 with NW 7.01
SAP Gui 7.20 PL 3 (signature design)
Thanks for your help and best regards
Olli
Edited by: Oliver Grewenig on Jan 18, 2012 11:30 AM

Hi Oliver,
I have done a similar testing for Tcode FB03 since I have done Archivelink configuration for this FI object.
Case 1:
=======
Start FB03 (no SAP Gui classic design!) and go to System - Services for Objects in order to start the GOS Toolbox. Try to to store a business document. In my case i don't have the authorisation S_WFAR_OBJ so i get the Message no. 00398 "You do not have authorization for this function"
Case 2:
========
Start FB03 and activate GOS Toolbox by clicking directly on the button on the top left corner. Try to a store a business document. Still got the same error message "You do not have authorization for this function".
Later I added the required object in the authorization profile and it worked in both the cases mentioned above.
Since the same program is being executed behind both the cases, it will check the same authorization object as designed.
What I would suggest is that you perform this test again and ensure that no one modifies the authorization during your testing period.
Regards,
Deepak Kori

Enable trace for particular concurrent program

Hi Experts,
I want to enable trace for the program called "Print Invoice Notice". I tick the enable trace box in Concurrent->Define-> navigation.
But i didn't get any trace under USER_DUMP_DEST destination.
Thanks
Sundar.

Hi,
Please run the query in (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12) to find the trace file name and location.
Regards,
Hussein

System trace for File, JDBC adapter

In the JDBC Adapter Help (help.com) I see:
The adapter writes the output (STDOUT and STDERR) for the operating system command in the system trace.
Which trace is meant here?
I have the same question regarding File Adapter.
Thanks, Jozsef

Hi,
have a look at my weblog to see how you can check
the traces:
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Function and procedure call overhead in PL/SQL

( I come from a programming background - java/c++ etc and not much PL/SQL )
Im trying to get a feel of how much extra cycles are spent if something is wrapped inside a function or procedure. I mean will it become considerably inefficient if the logic is within a function as opposed to be directly inline ?

I did some timings a few years ago and found procedure calls to be slightly more efficient than function calls, presumably due to the fact that functions must pass values back through the function invocation and procedures don't. This may have changed in more recent releases but you can check it yourself.
Set up a function and a procedure and use dbms_utility to get a starting and ending time marker (this will be the number of seconds from an arbitrary start point as microseconds; you will have to convert). Get a start time, loop through the calls a lot of times, get and end time, and subtract the end time from the start time.
The prevailing though is that use functions to return values and procedures to perform actions. You can use functions in SQL if written correctly but not procedures.

Hold function and conference calling trouble

The hold button and conference call functions just don't work on my phone. I have erased all data and reset the phone through ITunes and it still doesn't work. Is anyone else having this problem? Is there something I am doing wrong?
G5 Mac OS X (10.4.10)

Okaaay ...
As I said, my iPhone is not hacked. *T-Mobile is an official seller of the iPhone in Austria!*
And concerning your statement, that iPhones won't work with 4 year old SIM cards:
My *not hacked* iPhone works perfectly with my 4 year old SIM card except for the in the OP mentioned function!
As already said before, I found out, that this specific conference call service is not supported by the Austrian network. Neither with the iPhone nor with any other phone.
And yes, I've got an original, not hacked iPhone! So pleeease stop telling me the contrary!

Why is Apple the only people on earth that can't send an email to my gmail account? I use my gmail account for everything and people call me with it. Now I can't use it because Apple can't verify it.

Why is Apple the only people on earth that cannot send an email to my gmail account? I used my gmail account to receive calls on Face Time until the last update and now Apple "cannot verify" the account and they have sent over 100 "verification emails" but I have yet to receive one. Amazing!

My original Apple ID was my bellsouth address. When I got iCloud, it was merged with the .me address. I can use either to log into the same iCloud, Facetime, iTunes & Apple Store, and Messages. Seems you have 2 separate Apple IDs (one for iCloud and one for iTunes).
If you log into any app using the Apple ID such as Facetime, only the email addresses associated with it will work. You can log into the Manage Apple ID website and see what addresses are associated with that login.
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
I don't know of any way to merge seperate Apple IDs. You can try changing the one you use for iTunes to the one you use for iCloud and see if it works. If not, you can change the iTunes one to a different email address. Then you can disassociated the gmail address for the iTunes Apple ID and then associated it with the iCloud Apple ID. Once it's disassociated from one account, you will then be able to add it to the other and get the verification email.

Different MOH for Internal and External Calls

Is it possible to have a different MOH source for internal vs external calls.
I know that Network MOH is for transfering but can this be used for external MOH source from the PSTN?

There's really no way to do this easily. The issue is that the call to a PSTN phone would flow through a gateway and if an IP phone put this call on hold, then the Audio Source configured on the IP phone would determine the MoH file/source and the MRGL of the gateway would determine which MoH server it actually came from. As a result, there's really no way that the IP phone placing the call on hold could specify a different audio source for an internal call (to another IP phone) because even if the other phone has a different MRGL (and therefore a different MoH server), the MoH audio source will be the same

Shared file system recomended for OCR and voting Disk in 10g R2

Dear Friends,
For Oracle 10g R2 (10.2.0.5) 64 bit which shared file system is recomended for OCR and voting Disk (NFS / raw devices / OCFS2)
For Datafiles and FRA i planned to use ASM
Regards,
DB

Hi,
If your using standard edition then you got no choice but raw devices
http://docs.oracle.com/cd/B19306_01/license.102/b14199/options.htm#CJAHAGJE
for ocfs2 you need to take extra care
Heartbeat/Voting/Quorum Related Timeout Configuration for Linux, OCFS2, RAC Stack to Avoid Unnecessary Node Fencing, Panic and Reboot [ID 395878.1]

OWA for Iphone and international calling card

Hello,
I work as the Supervisor for a company that has just purchased many iphones. The group that is in charge of email at my company will only allow "OWA for Iphone" to be used because in this way, nothing is downloaded to the device. All email, calendar entries and contacts/people entries are web based. Because nothing is downloaded to the device, the Iphone app for any international calling card company like Reliance or True Roots will not work.
When I say, "will not work" this is why. All international calling card companies apps that I have found, access the local downloaded contacts on the Iphone itself. I have not found any that can connect to the people in the "OWA for Iphone" app to make international calls for cheeper prices.
Is there an international calling card company whose app will work with "OWA for Iphone" and not the locally stored contacts? Or one that I can make the choice, choose the contacts from the local Iphone and or people in the "OWA for Iphone" app?

International calling apps allow you to call an entry from your contact list. When you make a call from your device using this International calling app it will hang up, dial a 1 800 or 1866 number, then redial the international number you dialed and complete the call. This allows you to call for example, India for $.06/minute instead of $.50/minute or what ever your provider charges you. It basically make it so your international calls go through your international calling app provider instead of your phone provider. You still use your phone provider minutes, but the cost is rerouted to your international calling provider/partner.
1. I know, its so hard to do anything. Yes all smartphones (Iphones, Androids, Windows, etc...) The email admins will not allow anything to directly download to the device from the company. The OWA for IPhone app uses the web browser but changes the view of the email to look and feel user friendly. Basically, OWA for Iphone is using the web to look at all email, contacts, and calendar entries.
2. The international calling app (Reliance and all others I have found including Skype) will only look at local downloaded contacts. Because we are using OWA for Iphone there are no downloaded contacts. So, the international calling app does not see the contacts to be able to call.
If I go into OWA for IPhone and go to People and call somebody internationally +44 XX XXX XXXXX it works fine, but the international calling app does not activate becasue the app can't see the number. This is because its looking only at the local downloaded contacts list, not the contacts on the web using OWA for Iphone

System configuration for ITS and for BSP

Hi,
I´m looking for the parameters needed in a system to connect to an ITS and also to BSP.
I have created one system to be able to connect to ITS and another one to be able con connect to BSP, both of type SAP Load Balancing system.
The system I created to connect to ITS has the following configuration I entered:
Connector:
SAP Client = 350
Internet Transaction Server (ITS)
ITS Description = myDescription
ITS Host Name = myhostname:port
ITS Path = /sap/bc/gui/sap/its/webgui
ITS Protocol = http
Thats it that´s the only configuration I´ve made.
For the BSP system I entered:
Connector:
SAP Client = 800
Web Application Server (Web AS):
Web AS Description = myDescription
Web AS Host Name = myhostname:port
Web AS Path = /sap/bc/bsp/sap
Web AS Protocol = http
My question is this, is this configutation enough?,
It is working fine with this configuration but I´ve seen some other information where they fill more parameters in the connector section, would this extra parameters in the connector section help in any way or they will just simply be ignored?, We will be using Web Dispatcher for both.
does somebody knows the answer? Is there some documentation on this?
Thanx in Advanced!!
Kind Regards,
Gerardo J

The connector properties are only required if you are planning on utilizing the SAP connector to connect to your backend system.
What you have configured so far should suffice for ITS and BSP applications. I hope you have configured the system aliases already.
Have a look at the following links for some additional inputs:
http://wiki.sdn.sap.com/wiki/display/EP/MinimumSettingsforaSystem
http://wiki.sdn.sap.com/wiki/display/EP/HowtoCreateSystemObjectinthePortalforConnectingtoSAPbackend+System
- Shanti

System Trace for function and programs called?

Similar Messages

Maybe you are looking for