"System: Unable to find the specified object" on N...

When I go to Control panel->Messaging->Text message" I get the error:- "System: Unable to find the specified object".
I also can no longer send text messages. Every time I try to send a text message, it asks for the "Centre number" which presumably is the SMS service centre number, but even if I type this in I get an error "Error: Not found".
I'm sure these 2 issues are related but I'm not sure.
Please, can someone tell me how to fix this.
Thanks.

Hi
I have the same problem except for that mine is with my nokia 9500. Did you manage to fix your problem? I started getting the same message after I have deleted certain temporary files. I then, also noticed that I do not have access to the internet and the only available option reflected was W*EasyLan
Please assist if you have managed to fix your problem or can anybody out there assist me PLEASE. Thankx

Similar Messages

System: unable to find the specified object.

I am trying to install tomtom 5 for mobile on my 9300i. Installation is fine but when I try to launch the application it gives the following error.
system: unable to find the specified object.
I am not able to find any work around this. Any idea please share.
thanks in advance

Hi
I have managed to get TOMTOM mobile 5 working on my Nokia 9300i.
I think its just that the TOMTOM software was writen before the 9300i was released so it does not know whether the 9300i is series 60/80 or 90.
So change the file extension names of the file system/apps/ttmobile/ttmobile.app to ttmobile.appx
If your doing this in the phones file manager you may not be able to see the system directory so press the menu key when viewing the memory card directories in the memory card in file manager, then change the view seetings under the tool pull down menu.
Then once changing the S60 file extension name go into the system/apps/ttmobile80/ttmobile.appx to ttmobile.app
This will mean that this file shortcut will now appear on your desktop for Series 80 and not the series 60 version.
You will need to do the same for the Contacts program.
Change system/apps/TTnavcontacts/ttnavcontacts.app to ttnavcontacts.appx
Change system/apps/TTnav80/ttnav80.appx to ttnav80.app
Hope this helps this is the first time I have replied to a discussion page so don't expect any rapid response if you ask me a question..

System: Unable to find the specified object on 950...

Hi and hope you can help, I've just bought a 2nd user 9500 on eBay and all woeks fine EXCEPT when I receive a text and I try and open it I get the message above? Could the pevious owner have deleted a folder or something when he wiped all his data off?
Also, my firmware = v.04.44, how/where can I upgrade it to current firmware?
Thanks
Simon

21-Apr-2006
04:02 PM
simonpindar wrote:
Hi and hope you can help, I've just bought a 2nd user 9500 on eBay and all woeks fine EXCEPT when I receive a text and I try and open it I get the message above? Could the pevious owner have deleted a folder or something when he wiped all his data off?
Also, my firmware = v.04.44, how/where can I upgrade it to current firmware?
Thanks
Simon
Hello
I have the same problem with my handset ,but I could not found the way that I can solve this problem ,I just wanna to know ,could you solve your problem ?is it possible you explain for me what did you do exactly?
thanks

Office Web Apps - Office Web Apps was unable to find the specified certificate

Hello,
Let me start by saying I did not see a forum listed for Office Web Apps and figured the SharePoint forum would be the second best place to post this. With that said, here's my issue...
I installed OWA 2013 on a Windows Server 2012 (not R2) VM and installed all the prereqs as described here: http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx Since this is a test environment, I'm planning on using a self-signed
cert which appears to be supported based on info found here: http://technet.microsoft.com/en-us/library/2e147f11-6f47-46bc-90bf-b2f179958d11(v=office.15)#certificate.
I created the cert using the following command:
New-SelfSignedCertificate -DnsName owa.test.local -CertStoreLocation cert:\LocalMachine\My
I then edited the cert's properties in the Cert Manager MMC snap-in and added a friendly name of "2014_OWA_Cert". I then proceeded to try and create the OWA farm by running:
New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateName "2014_OWA_Cert" -EditingEnabled
This produces the following error:
New-OfficeWebAppsFarm : Office Web Apps was unable to find the specified certificate.
At line:1 char:1
+ New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateNa ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (:) [New-OfficeWebAppsFarm], ArgumentException
+ FullyQualifiedErrorId : CertificateNotFound,Microsoft.Office.Web.Apps.Administration.NewFarmCommand
What gives?

Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi

Unable to find the ODS object while creating Multiprovider, Help

Hello Experts,
Iam facing problems while creating the MULTIPROVIDER.
I am unable to find the ODS in the list during initial selection of creation of Multiprovider. There are some ODS's which appear, while others don't.
Is there any selection on ODS that is preventing it from appearing in the list of ODS's.
Please help....Very Urgent

In ODS-change screen tick checkbox for 'BEx reporting' that appears under 'settings'.
then save and activate ODS..
after this the ODS will appear in the list while creating multiprovider.
cheers,
Vishvesh
Message was edited by: Vishvesh

Unable not find the monitoring object(idoc monitoring ) in BPmon

Hello Guys,
     As part configuration of IDOC monitoring in BPmon configuration ,while i am creating monitoring object for IDOC monitoring (solman_workcenter->Business process operations ->setup Business process monitoring -->selected the solution --> business scenarios -->
As mentioned above i could not able to find the IDOC monitoring template in the droup down list
Components level on manage system:-
ST-PI       2008_1_710 SP 08
ST-A/PI   01Q_731 SP2
I have done the load monitoring definition by selecting respective local component and clicked on load monitoring definitions
Please help me on resolving the issue.
Regards,
Pavan

Hello Calvin van der Walt,
Please upgrade ST-PI & ST-A/PI component to latest level.I resolved my issue by doing ST-PI & ST-A/PI component upgarde.
I had raised an OSS message eith SAP on this isssue and SAP has asked us for ST-PI & ST-A/PI component upgarde.
So please go with ST-PI & ST-A/PI component upgarde it will resolve your issue.
Regards,
Pavan

Unable to find the specified site during the client push installation

Hi,
One of the users at my site is trying to push the client but for some reasons, the site tab is showing blank.
Please assist!

Hi,
Please make sure you can see the sites in Site Configuration of Administration workspace when you login with the user.
You could try to grant the permissions as the blog moutaz ibrahim provided to another user to see whether this user can see the site.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"The system cannot find the specified"

When I try to install HP Photosmart Full Feature Software and Drivers - fulling.exe
I get an error "The system cannot find the specified"
What is the fix?

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error "The System cannot find the specified" when installing XI3.1 FP1.3

Error "The System cannot find the specified" happened when installing XI3.1 FP1.3 to client machine, however the installation is OK to server.
After the error, go to Control Panel -> Add or Remove Programs, and observe.
BusinessObjects Enterprise XI 3.1 Client Tools is installed,
but BusinessObjects Enterprise XI 3.1 Client Tools Japanese Language Pack is not.
And Language Pack install log is not written.
The same error happened when installing .net2.0.
The installation for FP1.2 is OK.
Would you tell me what reason probablely this issue is?
Thanks.

Hello Sarah,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

The system cannot find the specified file

I have tried to download and install a driver for hp officejet 4500 wireless on 2 different computers, one windows 7
the other windows 8, with no sucess. I keep getting a message saying " The system cannot find the specified file".
I even paid for a driver on a disk and got the same message.
HELP ME PLEASE
Sincerely
meyerret

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error Message "the system cannot find the specified file"

Hi,
I built my website with iWeb, but when I want to publish it on my own domain (not .mac) I've always this error message (the system cannot find the specified file) with many files. I've tryed many ftp host but I still have the same problem. I ask my host domain manager and everything is ok with them. Si I guess that the problem comes from iWeb.
Please help me.
Thanks

I get the error: Cannot Copy 08 the curse in on my house: Cannot find the specified file. Make sure you specify the correct path and file name.
The song "the curse in on..." is on the "into the woods" soundtrack. I deleted the entire soundtrack from my iTunes Library, shut down and tried again. Same error. I did a search of all three hd (2 external and c) nothing found. I searched for song name and "into the woods" I even searched for the artist "Nicholas Parson Company" nothing on any of the 3 HDs. I also went into explorer and manually searched for the song under soundtracks, misc, various and I could not find it. I consolidated my library and restarted. I tried again and same error message. Can a level 4 or 5 offer any help. I am at a loss...
The error won't let me copy one library to another HD.

Unable to find the 'Panel Container 2' object

Hi,
I am unable to find the 'Panel Container 2' object under the containers folder of components. I am using xcelsius enterprise 2008.
I have a scenario where in which i need to use it, Is there any way I can get it into the canvas.
Thanks in advance,
Shreesh.

Hi,
Which Theme are you using now? Not all of the themes have "Panel Container 2" object. Theme "Aqua" and Theme "Nova" have "Panel Container 2", please try them.
Thanks,
Grace

MDT 2012 - Update Deploymentshare: Unable to open the specified WIM file

Hi @ all
wie have updated our Litetouch boot image using DISM and know we try to update the deploymentshare but we get the following error.
=== Making sure the deployment share has the latest x86 tools ===
=== Processing LiteTouchPE (x86) boot image ===
Building requested boot image profile.
System.Management.Automation.CmdletInvocationException: Unable to open the specified WIM file. ---> System.Exception: Unable to open the specified WIM file. ---> System.ComponentModel.Win32Exception: The system cannot find the file specified
   --- End of inner exception stack trace ---
   at Microsoft.BDD.Core.BDDWimFile..ctor(String wimPath, Boolean forUpdate)
   at Microsoft.BDD.PSSnapIn.UpdateDeploymentPoint.UpdateBootImage(String template, String platform, String dpPath, Boolean createISO, String isoName)
   at Microsoft.BDD.PSSnapIn.UpdateDeploymentPoint.ProcessRecord()
   at System.Management.Automation.CommandProcessor.ProcessRecord()
   --- End of inner exception stack trace ---
   at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate)
   at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
   at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()
Unable to open the specified WIM file? The image ist is stil in the boot folder.
Anybody an idea or an solution for that problem?
Thank's
Adrian

I had installed ADK to utilize the latest and greatest DISM tool. That broke WAIK and the boot.wim could not be found when updating the deployment shares. Thanks for the pointer...
Paul Prindle MCP, A+
That is because WAIK and ADK are unsupported as side-by-side installations.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
How to ask a question that is fixable.

"Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

Hello Everybody,
I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have the following settings in the PP Report:
Server Mode: SharePoint Integrated
SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
Document library : Documents (selected from drop down, my report is deployed to document library)
Report : report.rdl
When I select the report from drop down list its giving the error in a pop up message box as "Unable
to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
When I open the report directly from documents library its working fine and even it is working fine (
when I deployed the report) but the issue is parameters are not showing.
Any idea? Please help.
Thanks in Advance.

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Unable to find abstract layer object definition

Hi,
I am using SoapUI 3.6.1.
When I send a request "getAttribute" along with all the optional parameters, specifying the Username and password in the Request Properties window, I am getting following error.
<ns1:VdxServiceException xmlns="http://www.novell.com/vdx/service" xmlns:ns1="http://www.novell.com/vdx/service">
<reason>Unable to find abstract layer object definition for the specified definition key.</reason>
</ns1:VdxServiceException>
<stackTrace xsi:type="xsd:string">com.novell.srvprv.impl.vdata .soap.ws.impl.VdxServiceException
at com.novell.srvprv.impl.vdata.soap.ws.impl.VdxServe rHelper.convertToVdxServiceException(VdxServerHelp er.java:90)
In case of "getAttributes" request, an error is thrown.
<html><head><title>JBoss Web/2.1.3.GA - Error report</title><style></style> </head><body><h1>HTTP Status 401 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>This request requires HTTP authentication ().</u></p><HR size="1" noshade="noshade"><h3>JBoss Web/2.1.3.GA</h3></body></html>
Please suggest steps how can one get attributes of a user using SoapUI.

Sorry, I can't help you.
It's been too long since I have used SoapUI.
What is "getAttribute"?
It is not a SOAP request.
I also do know what "www.novell.com/vdx/service" is.
Preston
>>> On Friday, October 11, 2013 at 12:16 AM,
Nikender<[email protected]> wrote:
> Hi,
>
> I am using SoapUI 3.6.1.
>
> ‑ When I send a request "getAttribute" along with all the optional
> parameters, specifying the Username and password in the Request
> Properties window, I am getting following error.
>
> * <ns1:VdxServiceException xmlns="http://www.novell.com/vdx/service"
> xmlns:ns1="http://www.novell.com/vdx/service">
> <reason>Unable to find abstract layer object definition
> for the specified definition key.</reason>
> </ns1:VdxServiceException>
> <stackTrace
> xsi:type="xsd:string">com.novell.srvprv.impl.vdata .soap.ws.impl.VdxServic
> eException
> at
> com.novell.srvprv.impl.vdata.soap.ws.impl.VdxServe rHelper.convertToVdxSe
> rviceException(VdxServerHelper.java:90)*
>
> 2
> ‑ In case of "getAttributes" request, an error is thrown.
>
> <HTML><HEAD><TITLE>JBOSS WEB/2.1.3.GA ‑ ERROR
> REPORT</TITLE><STYLE><!‑‑H1
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:22PX;}
> H2
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:16PX;}
> H3
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;F
> ONT‑SIZE:14PX;}
> BODY
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:BLA CK;BACKGROUND‑COLOR:WHIT
E;}
> B
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;COLOR:WHI TE;BACKGROUND‑COLOR:#525
D76;}
> P
>
{FONT‑FAMILY:TAHOMA,ARIAL,SANS‑SERIF;BACKGROUN D:WHITE;COLOR:BLACK;FONT
SIZE
> :12PX;}A
> {COLOR : BLACK;}A.NAME {COLOR : BLACK;}HR {COLOR :
#525D76;}‑‑></STYLE>
> </HEAD><BODY><H1>HTTP STATUS 401 ‑ </H1><HR SIZE=\"1\"
> NOSHADE=\"NOSHADE\"><P><B>TYPE</B> STATUS REPORT</P><P><B>MESSAGE</B>
> <U></U></P><P><B>DESCRIPTION</B> <U>THIS REQUEST REQUIRES HTTP
> AUTHENTICATION ().</U></P><HR SIZE=\"1\" NOSHADE=\"NOSHADE\"><H3>JBOSS
> WEB/2.1.3.GA</H3></BODY></HTML>
>
> Please suggest steps how can one get attributes of a user using SoapUI.

"System: Unable to find the specified object" on N...

Similar Messages

Maybe you are looking for