System Update 4.0.0046 install fails on Windows 7 SP1
I just tried updating my Lenovo System Update to the latest version compatible with Windows 7 SP1 (version 4.0.0046), and it fails every time with the following error:
Windows cannot find 'C:\Users\DARREN~1.STI\AppData\Local\Temp\pftD0BB.tmp\setup\pasinst.exe' Make sure you typed the name correctly, and then try again.
I looked in the 'pftD0BB.tmp' folder and there is no 'setup' folder, so I'm guessing this is an error in the installer?
Any ideas? Definitely want to get this up and running again.
Thanks,
Darren David
It's no longer (sadly) surprising to me that this issue has not been publicly addressed and that I experienced the same issue with 4.0.100.1124 today.
Here is what worked for me. I don't have the bandwidth to test this again, nor is it likely the most direct method (I'm sure several of these steps are redundant). And I hate authoring instructions for just about anything. Just my blundering path to a non-failing installation.
1. Downloaded the systemupdate40-2011-02-18.exe from the Lenovo support site.
2. Ran systemupdate40-2011-02-18.exe and was presented with the "Windows cannot find..." love note.
3. Unpacked systemupdate40-2011-02-18.exe (I use winrar) to a folder on the desktop (e.g. \sysupdate\)
4. Ran setup.exe within that folder...same failure to find psainst.exe
5. Located and executed psaddZip.exe within same folder. This unpacks to a \setup folder with, surprise surprise, psainst.exe within.
6. Ran setup.exe again. Successful installation.
System Update 4.0.1.x.whatever ran, checked, and updated beautifully, and then BSOD'd on restart. But I'm still here.
Your mileage will most certainly vary.
wws
Similar Messages
-
System Update 4 won't install on W500/Win 7. (Lenovo Support unhelpful and have stopped responding).
Hello Forum,
I am trying to solve a problem I have trying to install System Update 4.0 onto a Thinkpad W500 running Windows 7.
I did have System Update 3.14 running a while ago and was told to update to 4.0 but to date I have not been able to install this. Version 3.14 was uninstalled successfully and a reboot was done before the install attempt. Version 4.0 starts to install and then comes up with an error message.
Lenovo Support were contacted via email and the only suggestion that was given was to completely format the laptop and re-install Windows Vista from the Lenovo disks, (they did at least supply these). This I find an unacceptable solution to the problem as version 4.0 is for Windows 7 only and therefore negate this, but the major issue is I want to fix this issue, not downgrade the whole OS.
The error message reads; "Windows cannot find 'C:\Users\*******\AppData\Local\Temp\pftD377.tmp\setup\psainst.exe'. Make sure you typed the name correctly, and then try again."
They have not contacted me since the 13th July, even though I replied to their message on the 13th, and again on the 22nd July.
If anyone knows how I can escalate this within Lenovo I would appreciate the information.
Apologies if this is the forum or thread for this, but as Lenovo are so unresponsive, they left me no option (and I haven't resorted to bad language and abuse hurling).
Many thanks all.If you can take the pain, you could try kenningar's solution at the bottom of this page. Might help.
Re: System Update 4.0.0046 install fails on Windows 7 SP1
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Folio 9480m Windows 10 Keeps Failing to Install FAILED THROUGH WINDOWS UPDATE
Ive tried many many times to get this to work and dont know what to do, is there specific secuirity settuing with my folio 9480m that i need to disable before trying to update? it gets to a point where it says the drive isnt unlocked or something alike that. then back to windows 7 just keeps failing at windows update straight from microsoft trying to get upgraded to windows 10 technical preview
if u have updates that wont go away and every time windows fails they pop back up, right click and hide them before next attempt at windows 10 installation (it is most likely what gives the error and most likely is a driver issue)
-
KB2775511 install fails on Windows 7 SP1 x86
I receive the following error in the windowsupdate.log when trying to install KB2775511.
Installation Failure: Windows failed to install the following update with error 0x80070005: Update for Windows (KB2775511)
I've found other posts that suggested to look at KBs 947821 and 968003. I've tried both articles and I'm still receiving the same error above. Has anyone else had this issue and/or resolved it
Thanks,
JonI removed just my server name for security reasons. Copy and pasted the run attempt from today with the error included in the log.
2014-07-09 14:47:42:995 1148 2710 Handler Selecting self-contained because update does not have express payload.
2014-07-09 14:47:42:995 1148 2710 Handler Selected payload type is ptSelfContained
2014-07-09 14:47:42:995 1148 2710 Handler Detected download state is dsStart
2014-07-09 14:47:42:995 1148 2710 Handler Adding windows6.1-kb2775511-v2-x86.cab (entire file) to request list.
2014-07-09 14:47:42:996 1148 2710 Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2014-07-09 14:47:43:255 1148 2710 Misc Validating signature for C:\Windows\SoftwareDistribution\Download\2ba9469f5c057424546d2834feb46510_ctc\windows6.1-kb2775511-v2-x86.cab:
2014-07-09 14:47:43:558 1148 2710 Misc Microsoft signed: Yes
2014-07-09 14:47:43:558 1148 2710 DnldMgr Asking handler to generate non-range requests.
2014-07-09 14:47:43:564 1148 2710 Handler Generating request for CBS update 899E0025-813A-4511-868D-B05B3D459F5F in sandbox C:\Windows\SoftwareDistribution\Download\2ba9469f5c057424546d2834feb46510_ctc
2014-07-09 14:47:43:564 1148 2710 Handler Selecting self-contained because update does not have express payload.
2014-07-09 14:47:43:564 1148 2710 Handler Selected payload type is ptSelfContained
2014-07-09 14:47:43:564 1148 2710 Handler Detected download state is dsHavePackage
2014-07-09 14:47:43:565 1148 2710 Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2014-07-09 14:47:43:581 3752 2478 COMAPI -------------
2014-07-09 14:47:43:581 3752 2478 COMAPI -- START -- COMAPI: Install [ClientId = CcmExec]
2014-07-09 14:47:43:581 3752 2478 COMAPI ---------
2014-07-09 14:47:43:581 3752 2478 COMAPI - Allow source prompts: No; Forced: No; Force quiet: Yes
2014-07-09 14:47:43:581 3752 2478 COMAPI - Updates in request: 1
2014-07-09 14:47:43:581 3752 2478 COMAPI - ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-09 14:47:43:582 3752 2478 COMAPI - Updates to install = 1
2014-07-09 14:47:43:582 3752 2478 COMAPI <<-- SUBMITTED -- COMAPI: Install [ClientId = CcmExec]
2014-07-09 14:47:43:583 1148 2408 Agent *************
2014-07-09 14:47:43:583 1148 2408 Agent ** START ** Agent: Installing updates [CallerId = CcmExec]
2014-07-09 14:47:43:583 1148 2408 Agent *********
2014-07-09 14:47:43:583 1148 2408 Agent * Updates to install = 1
2014-07-09 14:47:43:587 1148 2408 Agent * Title = Update for Windows 7 (KB2775511)
2014-07-09 14:47:43:588 1148 2408 Agent * UpdateId = {B64C56E2-6C8B-4119-A804-E05B92A8B607}.201
2014-07-09 14:47:43:588 1148 2408 Agent * Bundles 2 updates:
2014-07-09 14:47:43:588 1148 2408 Agent * {5FA68C15-05CE-486B-BC01-12E7A0D5F754}.201
2014-07-09 14:47:43:588 1148 2408 Agent * {899E0025-813A-4511-868D-B05B3D459F5F}.201
2014-07-09 14:47:54:263 1148 2408 DnldMgr Preparing update for install, updateId = {5FA68C15-05CE-486B-BC01-12E7A0D5F754}.201.
2014-07-09 14:47:54:273 4416 2564 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -1000) ===========
2014-07-09 14:47:54:273 4416 2564 Misc = Process: C:\Windows\system32\wuauclt.exe
2014-07-09 14:47:54:273 4416 2564 Misc = Module: C:\Windows\system32\wuaueng.dll
2014-07-09 14:47:54:271 4416 2564 Handler :::::::::::::
2014-07-09 14:47:54:273 4416 2564 Handler :: START :: Handler: Command Line Install
2014-07-09 14:47:54:273 4416 2564 Handler :::::::::
2014-07-09 14:47:54:273 4416 2564 Handler : Updates to install = 1
2014-07-09 14:47:54:360 4416 2564 Handler : Command line install completed. Return code = 0x00000000, Result = Succeeded, Reboot required = false
2014-07-09 14:47:54:362 4416 2564 Handler :::::::::
2014-07-09 14:47:54:362 4416 2564 Handler :: END :: Handler: Command Line Install
2014-07-09 14:47:54:362 4416 2564 Handler :::::::::::::
2014-07-09 14:47:54:368 1148 2408 DnldMgr Preparing update for install, updateId = {899E0025-813A-4511-868D-B05B3D459F5F}.201.
2014-07-09 14:47:54:371 4416 2564 Handler :::::::::::::
2014-07-09 14:47:54:371 4416 2564 Handler :: START :: Handler: CBS Install
2014-07-09 14:47:54:371 4416 2564 Handler :::::::::
2014-07-09 14:47:54:375 4416 2564 Handler Starting install of CBS update 899E0025-813A-4511-868D-B05B3D459F5F
2014-07-09 14:47:54:417 4416 2564 Handler CBS package identity: Package_for_KB2775511~31bf3856ad364e35~x86~~6.1.2.1
2014-07-09 14:47:54:420 4416 2564 Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\2ba9469f5c057424546d2834feb46510\windows6.1-kb2775511-v2-x86.cab,
workingdir=C:\Windows\SoftwareDistribution\Download\2ba9469f5c057424546d2834feb46510\inst
2014-07-09 14:49:19:155 4416 2564 Handler Requesting post-reboot reporting for package Package_for_KB2775511~31bf3856ad364e35~x86~~6.1.2.1.
2014-07-09 14:49:19:156 4416 2564 Handler Completed install of CBS update with type=3, requiresReboot=1, installerError=0, hr=0x0
2014-07-09 14:49:19:156 4416 2564 Handler :::::::::
2014-07-09 14:49:19:156 4416 2564 Handler :: END :: Handler: CBS Install
2014-07-09 14:49:19:156 4416 2564 Handler :::::::::::::
2014-07-09 14:49:19:169 1148 2408 Agent *********
2014-07-09 14:49:19:170 1148 2408 Agent ** END ** Agent: Installing updates [CallerId = CcmExec]
2014-07-09 14:49:19:170 1148 2408 Agent *************
2014-07-09 14:49:19:170 3752 16a0 COMAPI >>-- RESUMED -- COMAPI: Install [ClientId = CcmExec]
2014-07-09 14:49:19:171 3752 16a0 COMAPI - Install call complete (succeeded = 1, succeeded with errors = 0, failed = 0, unaccounted = 0)
2014-07-09 14:49:19:171 3752 16a0 COMAPI - Reboot required = Yes
2014-07-09 14:49:19:171 3752 16a0 COMAPI ---------
2014-07-09 14:49:19:171 3752 16a0 COMAPI -- END -- COMAPI: Install [ClientId = CcmExec]
2014-07-09 14:49:19:171 3752 16a0 COMAPI -------------
2014-07-09 14:49:19:171 1148 ddc AU Can not perform non-interactive scan if AU is interactive-only
2014-07-09 14:49:24:157 1148 2364 Report CWERReporter finishing event handling. (00000000)
2014-07-09 14:49:57:309 1148 ddc AU AU initiates service shutdown
2014-07-09 14:49:57:309 1148 ddc AU ########### AU: Uninitializing Automatic Updates ###########
2014-07-09 14:49:57:325 1148 ddc Report CWERReporter finishing event handling. (00000000)
2014-07-09 14:49:57:434 1148 ddc Service *********
2014-07-09 14:49:57:434 1148 ddc Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-07-09 14:49:57:434 1148 ddc Service *************
2014-07-09 14:55:02:367 1176 158c Misc =========== Logging initialized (build: 7.6.7600.256, tz: -1000) ===========
2014-07-09 14:55:02:367 1176 158c Misc = Process: C:\Windows\system32\svchost.exe
2014-07-09 14:55:02:367 1176 158c Misc = Module: c:\windows\system32\wuaueng.dll
2014-07-09 14:55:02:367 1176 158c Service *************
2014-07-09 14:55:02:367 1176 158c Service ** START ** Service: Service startup
2014-07-09 14:55:02:367 1176 158c Service *********
2014-07-09 14:55:02:383 1176 158c Agent * WU client version 7.6.7600.256
2014-07-09 14:55:02:383 1176 158c Agent * Base directory: C:\Windows\SoftwareDistribution
2014-07-09 14:55:02:398 1176 158c Agent * Access type: No proxy
2014-07-09 14:55:02:398 1176 158c Agent * Network state: Connected
2014-07-09 14:55:02:507 1176 7b4 Report CWERReporter::Init succeeded
2014-07-09 14:55:02:507 1176 7b4 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-07-09 14:55:02:507 1176 7b4 Agent *********** Agent: Initializing global settings cache ***********
2014-07-09 14:55:02:507 1176 7b4 Agent * WSUS server: http://XXXXX:8530
2014-07-09 14:55:02:507 1176 7b4 Agent * WSUS status server: http://XXXXX:8530
2014-07-09 14:55:02:507 1176 7b4 Agent * Target group: (Unassigned Computers)
2014-07-09 14:55:02:507 1176 7b4 Agent * Windows Update access disabled: Yes
2014-07-09 14:55:02:507 1176 7b4 DnldMgr Download manager restoring 0 downloads
2014-07-09 14:55:02:507 1176 7b4 Agent Attempt 0 to obtain post-reboot results.
2014-07-09 14:55:02:539 1176 7b4 Handler Post-reboot status for package Package_for_KB2775511~31bf3856ad364e35~x86~~6.1.2.1: 0x80070005.
2014-07-09 14:55:02:539 1176 7b4 Handler WARNING: Got extended error: "Driver servicing operation failed"
2014-07-09 14:55:02:539 1176 7b4 Handler WARNING: Failed to parse extended error: 0x80070057
2014-07-09 14:55:02:757 1176 158c Report *********** Report: Initializing static reporting data ***********
2014-07-09 14:55:02:757 1176 158c Report * OS Version = 6.1.7601.1.0.65792
2014-07-09 14:55:02:757 1176 158c Report * OS Product Type = 0x00000004
2014-07-09 14:55:02:773 1176 158c Report * Computer Brand = Dell Inc.
2014-07-09 14:55:02:773 1176 158c Report * Computer Model = Latitude E6410
2014-07-09 14:55:02:773 1176 158c Report * Bios Revision = A04
2014-07-09 14:55:02:773 1176 158c Report * Bios Name = Default System BIOS
2014-07-09 14:55:02:773 1176 158c Report * Bios Release Date = 2010-07-08T00:00:00
2014-07-09 14:55:02:773 1176 158c Report * Locale ID = 1033
2014-07-09 14:55:02:851 3752 10a4 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -1000) ===========
2014-07-09 14:55:02:851 3752 10a4 Misc = Process: C:\Windows\system32\CCM\CcmExec.exe
2014-07-09 14:55:02:851 3752 10a4 Misc = Module: C:\Windows\system32\wuapi.dll
2014-07-09 14:55:02:851 3752 10a4 COMAPI -------------
2014-07-09 14:55:02:851 3752 10a4 COMAPI -- START -- COMAPI: Search [ClientId = CcmExec]
2014-07-09 14:55:02:851 3752 10a4 COMAPI ---------
2014-07-09 14:55:02:867 3752 10a4 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = CcmExec]
2014-07-09 14:55:03:023 1176 9e0 Agent *************
2014-07-09 14:55:03:023 1176 9e0 Agent ** START ** Agent: Finding updates [CallerId = CcmExec]
2014-07-09 14:55:03:023 1176 9e0 Agent *********
2014-07-09 14:55:03:023 1176 9e0 Agent * Include potentially superseded updates
2014-07-09 14:55:03:023 1176 9e0 Agent * Online = No; Ignore download priority = Yes
2014-07-09 14:55:03:023 1176 9e0 Agent * Criteria = "(DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')"
2014-07-09 14:55:03:023 1176 9e0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-09 14:55:03:023 1176 9e0 Agent * Search Scope = {Machine}
2014-07-09 14:55:38:236 1176 9e0 Agent * Added update {14C9B803-8F12-45A5-8F00-936B6EC937EE}.202 to search result
2014-07-09 14:55:38:236 1176 9e0 Agent * Added update {9E8A0009-E9DF-4A4C-8C14-2D348A160ADB}.103 to search result
2014-07-09 14:55:38:236 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:236 1176 9e0 Agent Update {33A4AA0A-CB01-4326-85F4-4A7D33D8782B}.101 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:252 1176 9e0 Agent Update {F5202A56-FF34-401D-A040-F97C7F70891C}.102 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:252 1176 9e0 Agent Update {35EB79DF-CB34-491C-AB0A-34B63F32B45C}.102 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {A52544E0-929D-4DCF-A3DA-8093EF89546C}.101 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {664A07E1-65EB-411E-9D97-4895C9F6E43D}.100 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {83DE26E2-9963-450C-B423-97F99F624528}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {B64C56E2-6C8B-4119-A804-E05B92A8B607}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {0F028FE3-2563-4461-919D-4D084BE3991E}.100 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {B5A80FE4-5AD2-4BB0-A522-80B37F37F929}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {9A5132E4-CA62-4F66-BBE2-D920E6252678}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {303559E4-841A-4F9E-9EC4-2FE09E6B8488}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {68879CE4-58D7-4368-990E-8C7DECAF0AFA}.205 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {E623E3E7-835F-4058-90A9-3BD24E5B20B4}.101 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {17DE84E9-95FE-4567-9CC8-209B3E2F1FC6}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:252 1176 9e0 Agent Update {73AB9CEA-FA20-4D92-9719-F01F13F613C1}.201 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {E1FD3CEB-4DA6-4B3F-9938-C0CBB221B195}.200 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {CB9557EB-07E0-43B0-92BE-D4F47EDFBB66}.102 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {E39E5CEB-1C7D-4E44-8F4F-30C239E4D668}.102 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {9594FFEB-42EA-441A-9753-B976E7DAC039}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {348303EC-CCBB-4EB1-88CD-191EF876EFCA}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {DD0187ED-CDE7-4117-B1D2-D8DD119B55E7}.202 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {E09F55EF-73B5-4F1F-86B7-B58EBA1AC466}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {B43CB2EF-EB7D-48CD-9880-3BBF2C33CA76}.204 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {078CB5EF-859C-4ADE-B8C6-995141424014}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {1937F4EF-9725-4B45-9679-F6D9F22B9F98}.104 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {EE1753F3-40C1-46ED-87F5-D7B31C13F43B}.203 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {265B58F6-A5DC-4167-861C-686C5B2D8769}.200 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {7982F5F8-EA1F-403C-A0F3-6533439E935A}.200 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {CE0122FA-3BB3-4BE4-B1AA-902FE2150753}.201 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {057B51FA-A4D8-4832-BD60-D981071731B7}.200 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {01E49AFA-5893-4D4E-8EA4-7504E4539686}.204 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {08FF26FD-ABF8-4A3B-8C2F-39A0B9DB3C38}.101 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent Bundle contains no deployed children and thus is invalid.
2014-07-09 14:55:38:252 1176 9e0 Agent Update {AD15F7FD-868E-4CC3-8CD0-826AF83EB4F4}.201 is not a valid bundle. Not returning it.
2014-07-09 14:55:38:252 1176 9e0 Agent * Added update {BFF918FE-1A4A-411C-96AA-EB2222D766DE}.205 to search result
2014-07-09 14:55:38:252 1176 9e0 Agent * Found 212 updates and 76 categories in search; evaluated appl. rules of 1616 out of 3202 deployed entities
2014-07-09 14:55:38:267 1176 9e0 Agent *********
2014-07-09 14:55:38:267 1176 9e0 Agent ** END ** Agent: Finding updates [CallerId = CcmExec]
2014-07-09 14:55:38:267 1176 9e0 Agent *************
2014-07-09 14:55:38:283 1176 9e0 Report REPORT EVENT: {635DC3FB-8E51-4503-9430-7DECAD93C51C} 2014-07-09 14:55:02:835-1000 1
182 101 {B64C56E2-6C8B-4119-A804-E05B92A8B607} 201 80070005 CcmExec Failure Content Install Installation Failure:
Windows failed to install the following update with error 0x80070005: Update for Windows 7 (KB2775511).
2014-07-09 14:55:38:283 3752 163c COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2014-07-09 14:55:38:361 1176 9e0 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-07-09 14:55:38:361 1176 9e0 Report WER Report sent: 7.6.7600.256 0x80070005 B64C56E2-6C8B-4119-A804-E05B92A8B607 Install 101 Managed
2014-07-09 14:55:38:361 1176 9e0 Report CWERReporter finishing event handling. (00000000)
2014-07-09 14:55:38:502 3752 163c COMAPI - Updates found = 212
2014-07-09 14:55:38:502 3752 163c COMAPI ---------
2014-07-09 14:55:38:502 3752 163c COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2014-07-09 14:55:38:502 3752 163c COMAPI -------------
2014-07-09 14:55:47:512 1176 158c AU ########### AU: Initializing Automatic Updates ###########
2014-07-09 14:55:47:512 1176 158c AU # WSUS server: http://XXXXX:8530
2014-07-09 14:55:47:512 1176 158c AU # Detection frequency: 22
2014-07-09 14:55:47:512 1176 158c AU # Approval type: Scheduled (User preference)
2014-07-09 14:55:47:512 1176 158c AU # Scheduled install day/time: Every day at 3:00
2014-07-09 14:55:47:512 1176 158c AU # Auto-install minor updates: Yes (User preference)
2014-07-09 14:55:47:512 1176 158c AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-07-09 14:55:47:512 1176 158c AU Setting AU scheduled install time to 2014-07-10 13:00:00
2014-07-09 14:55:47:512 1176 158c AU Successfully wrote event for AU health state:0
2014-07-09 14:55:47:512 1176 158c AU Initializing featured updates
2014-07-09 14:55:47:512 1176 158c AU Found 0 cached featured updates
2014-07-09 14:55:47:512 1176 158c AU Successfully wrote event for AU health state:0
2014-07-09 14:55:47:512 1176 158c AU Successfully wrote event for AU health state:0
2014-07-09 14:55:47:512 1176 158c AU AU finished delayed initialization
2014-07-09 14:55:47:512 1176 158c AU #############
2014-07-09 14:55:47:512 1176 158c AU ## START ## AU: Search for updates
2014-07-09 14:55:47:512 1176 158c AU #########
2014-07-09 14:55:47:512 1176 158c AU <<## SUBMITTED ## AU: Search for updates [CallId = {06B30CB6-8302-4B93-9177-3200E40555A4}]
2014-07-09 14:55:47:512 1176 9e0 Agent *************
2014-07-09 14:55:47:512 1176 9e0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-09 14:55:47:512 1176 9e0 Agent *********
2014-07-09 14:55:47:512 1176 9e0 Agent * Online = No; Ignore download priority = No
2014-07-09 14:55:47:512 1176 9e0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1
and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-07-09 14:55:47:512 1176 9e0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-07-09 14:55:47:512 1176 9e0 Agent * Search Scope = {Machine}
2014-07-09 14:55:49:011 1176 9e0 Agent * Found 0 updates and 76 categories in search; evaluated appl. rules of 241 out of 3202 deployed entities
2014-07-09 14:55:49:011 1176 9e0 Agent *********
2014-07-09 14:55:49:011 1176 9e0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-07-09 14:55:49:011 1176 9e0 Agent *************
2014-07-09 14:55:49:027 1176 184 AU >>## RESUMED ## AU: Search for updates [CallId = {06B30CB6-8302-4B93-9177-3200E40555A4}]
2014-07-09 14:55:49:027 1176 184 AU # 0 updates detected
2014-07-09 14:55:49:027 1176 184 AU #########
2014-07-09 14:55:49:027 1176 184 AU ## END ## AU: Search for updates [CallId = {06B30CB6-8302-4B93-9177-3200E40555A4}]
2014-07-09 14:55:49:027 1176 184 AU #############
2014-07-09 14:55:49:027 1176 184 AU Featured notifications is disabled.
2014-07-09 14:55:49:027 1176 184 AU Setting AU scheduled install time to 2014-07-10 13:00:00
2014-07-09 14:55:49:027 1176 184 AU Successfully wrote event for AU health state:0
2014-07-09 14:55:49:027 1176 184 AU Successfully wrote event for AU health state:0
2014-07-09 14:55:52:525 1176 9e0 Report REPORT EVENT: {0C6FC380-B0D7-4305-90B4-3A2AFB8A20AA} 2014-07-09 14:55:47:512-1000 1
202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
2014-07-09 14:55:52:525 1176 9e0 Report CWERReporter finishing event handling. (00000000) -
System update 5.03 for T520i 4239CTO running windows 7 64-bit does not execute
Hi, I've just installed the latest Lenovo system update software but it does not run properly. I just get the initial popup screen showing the version but nothing else happens. Looking at the event viewer I see an error saying "Retrieved null machine type model". Any advice on how to resolve this ?
Tx,Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
* [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
* [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help] -
ProClarity 6.3 PAS install fails on Windows Server 2012
We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
KevinI have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas -
May 22, 2014 Update Available is not installing on my windows 7 system. How do I get it installed?
I start Muse everyday. Each day I am told an update is available. I click install. The gas gauge moves from left to right. It finishes. I restart Muse and no update is installed. I shut system down. I start Muse. I am told a new update is available.
You see the loop here. What can I do to get this update loaded?Hi James,
While re-installing Muse try to change the install location and see if that makes a difference.
- Abhishek Maurya -
Software Updates "can't be installed" & "failed to mount" messages
In software update; all new software, Quicktime, iTunes, Java for Mac and Security Update; I get a message saying that they can't be installed, followed by :"The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”."
I also cannot download software updates (ie: Firefox or adobe flash player). I've already repaired permissions and verified disks. I've also gone to the main websites to download from and when I try to run them, I get "disk images failed to mount.." and the reason being "codec overrun" every time.
Some one please help!Hi jrsysurfer, and a warm welcome to the forums!
I see you've done some of this already, but since it seems something is corrupted with your OS, am including it all, but I think it may take an A&I.
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If it appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, APPs, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Be sure to use Preserve Users & Settings. -
Also when closing tabs and windows the screen appears to momentarily go a blue color. This same blue color can also be seen when Firefox appears to crash or stall. If you try to open a new tab or a new window there appears to be some hesitation before the new window opens and sometimes the new window or tab simply refuses to open-you then have to shut down Firefox and restart to improve this.
RgdsThanks Alan I tried disabling several items so far and the situation has improved but still not as stable as I would like. Systematic approach is the key here so I'll continue with a process of elimination.
Rgds -
SQL 2008 R2 install failing on windows 2008 exit code 2068054013
My install of sql server 2008 r2 is failing with exit code 2068054013. i have checked internet and found few articles to check if OS is debug mode. This is not issue with my server. Here is the summary.txt from bootstrap folder
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068054013
Exit facility code: 1212
Exit error code: 3
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-03-14 18:24:11
End time: 2014-03-14 18:39:18
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4266.0
Machine Properties:
Machine name: BEL-BHP-DB01
Machine processor count: 4
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: D:\SoftBank\SlipStream\SQL2008R2\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,BIDS,CONN,IS,BC,SDK,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: D:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: D:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: F:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: LocalAccuount
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: E:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlWriter_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCESqlWbTools_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCRuntime_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SQLSysClrTypes_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCESqlWbTools_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SSCRuntime_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\BestPracticesPolicies_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x3
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SqlSupport_KatmaiRTM_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140314_182326\SystemConfigurationCheck_Report.htmHi,
Thanks for the update. Glad to know your issue is resolved.
If you look at the log file SqlSupport_KatmaiRTM_Cpu64_1.log.txt, you will find this error
MSI (s) (64:94) [18:39:14:853]: Note: 1: 2203 2: D:\SoftBank\SlipStream\SQL2008R2\1033_ENU_LP\x64\setup\sql2008support\SqlSupport.msi 3: -2147287037
The exact error no. i.e. -2147287037.
Convert this error no. using a tool (Err.exe)
D:\Err>Err.EXE -2147287037
# for decimal -2147287037 / hex 0x80030003 :
STG_E_PATHNOTFOUND
oledberr.h
STG_E_PATHNOTFOUND
winerror.h
# The path %1 could not be found.
-2147287037 = The path %1 could not be found. Which means the msi file path D:\SoftBank\SlipStream\SQL2008R2\1033_ENU_LP\x64\setup\sql2008support\SqlSupport.msi doesn't exist.
This posting is provided “AS IS” with no warranties, and confers no rights.
If this reply answers your question, please mark it as Answered for others to find it easily.
If this reply help you resolving the problem, please vote the post as Helpful. -
Itunes install fails on windows vista
I had done an update to iTunes some time ago. It failed. I tried all the methods to fix it and in the end removed iTunes, Quicktime, etc. I have removed the programs. deleted the directories and cleaned the registries of the misc entries (using RegCure) rebooting in between each step.
the exact message is "Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services.
I only have one user made on the machine - which is of course admin. I have tried changing ownership and permissions on the iPod directory after it is created all to no avail.
Please just don't link the the "remove iTunes from a windows vista machine" thread. I have run the MS cleanup utility also. I have tried all kinds of things people have suggested and so far none have worked. PLEASE help me.I had used msconfig and aggressively turned off startups and services. I had not done it after a fresh uninstall and cleanup and reboot though. Just the reboot as part of applying the changes made and trying to reinstall iTunes. I had just completed that to no avail.
So what I just tried was as follows:
1. Uninstalled all Apple software including QuickTime, Bonjour, Software Updater and Mobile Device Support using the Apple guide.
2. Rebooted.
3. Ran RegCure to remove misc registry entries no longer associated with iTunes, etc.
4. Ran MS Installer Cleanup Wizard.
5. Deleted any remaining Apple directories in c:\Program Files.
6. Rebooted.
7. Ran msconfig and aggressively deselected startups and services. Ensured iTunes and iPod where selected. Ensured selective startup was selected.
8. Rebooted.
9. Downloaded and reinstalled iTunes.
10. Received the same failure notices - the failed to start one and if i tried to start the iPod service manually through the service manager, failed to respond in a timely manner message. The events log for the iTunes install error is "A timeout was reached (30000 milliseconds) while waiting for the iPod Service service to connect." and the event log for the manual start from the service manager attempt is: "The iPod Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
11. Changed permissions for all entries in the permissions list to full control.
12. Tried reinstall - failure.
13. Took ownership of c:\program files\ipod directories and files.
14. Tried reinstall - failure.
15. To make sure I tried the install two times - once with my iPod connected and once without.
16. Wrote this entry in the forums.
Previously I had tried the new admin user you had suggested. -
Oracle 7 install fails with Windows XP SP3
After installing Windows SP3 on systems with XP Professional 32 bit, we cannot install Oracle 7.3.4, which is required for an older 16 bit program. Running the Oracle 7 setup.exe returns an error "setup.exe is not a valid Win32 application". The installer file is not corrupt, we can still run the setup successfully on any computers that still have XP Pro SP2 installed.
However, systems that had Oracle 7.3.4 installed prior to the Windows SP3 update will run the software OK; it is just new installations of Oracle 7.3.4 that fail.
I have tried running the install off of a CD, network drive, and copied the files to the local machine, all return the same error. I have tried different users all with Admin privileges. I tried installing with each compatibility mode checked, clean booting the machine, and updating Windows Installer. I always get the "setup.exe is not a valid Win32 application" error.
Any suggestions or info?
ThanksHere is some updated information.
Systems that have been in service for a long time and updated from Windows XP Pro SP2 to SP3 will not run the Oracle 7 installer. All machines that still have SP2 will run the installer.
However, systems that we recently formatted and reinstalled Windows XP Pro with SP2, and then updated to SP3, will run the installer for Oracle 7 with SP3 already installed. This indicates that it is not SP3 that is the issue. It could be an update that was done in the past (Microsoft or another software vendor), or some different file that is on the other machines (same brand, models, and OS, just been in service without being formatted recently).
We also have Oracle 10g on all the systems, but the old CrisPlus program probably won't run with Oracle 10g, because we have to add "C:\ORAWIN\BIN" to the system Environmental Variables or we get a "Ora7win.dll" error when launching the CrisPlus program. An Oracle expert or programmer may know how to work around this issue, but I do not know how.
This does give us options to fix the Oracle 7 issue. Either rollback the SP3 update and then install CrisPlus prior to the installation of SP3, or format the systems and reinstall Windows XP Pro, Service Pack3, and Oracle 7.
Thanks for the input. If anyone thinks of an easier workaround please let me know. -
VMM Agent install fails on Windows Server 2012 R2 Hyper-V
Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
Thanks
Kumaresan LakshmananSo, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now. -
HP Laserjet CM1415 install fail on windows 7 64 bits
Under windows 7 64bits it's impossible to resinstall the driver for my multifunction printer hp1415 connected with USB to a dell laptop .
I've got this at the end of setup :
"installation failed"
and setup failed saying something is too long around 99 %
Any idea ? (i tried every tips on HP support)
I tried Universal Driver, it's ok as workaroung but i need to make all functions working (scan, etc ...)Je suis bon, Il fait très beau!
I would recommend uninstalling the software (if any has installed) and restarting the PC. Then follow the link below and select your operating system to be directed to the most appropriate software and drivers for the printer.
http://goo.gl/3RRkl
Try doing the installation from this software, and another thing to note - if you are outside of the States you should select your appropriate country from the country select option in the bottom left hand corner of the webpage.
Let me know if this helps! -
I have been succesfully installed DS 5.2 on XP several times, but after i did last time uninstall DS5.2 from the XP, I met problem to install it again. The screen freez at "please waiit while components is loaded".
I have cleaned up the registry on the sladp following other stread, but still i can not install, it alwasy freeze at the same screen.
I run setup with debug open, here is the error i get.
What should I do now?
Thanks.
\setup -debug
Enabling debug mode.
Using long form attribute offset calculation.
Time to find offset table: 10ms
archiveReader class com.sun.wizards.core.ArchiveReader has length 27349
archiveReader class com.sun.wizards.core.Platform has length 7176
archiveReader class com.sun.wizards.core.SystemInterface has length 9819
archiveReader class com.sun.wizards.core.PlatformToolkit has length 3134
archiveReader class AixNativeToolkit has length 15854
archiveReader class SolarisPlatformToolkit has length 17266
archiveReader class LinuxNativeToolkit has length 10697
archiveReader class WindowsPlatformToolkit has length 16255
archiveReader class WindowsNativeToolkit has length 17629
archiveReader class HpuxNativeToolkit has length 11420
archiveReader class LinuxPlatformToolkit has length 10110
archiveReader class Osf1NativeToolkit has length 20329
archiveReader class Osf1PlatformToolkit has length 17213
archiveReader class AixPlatformToolkit has length 13323
archiveReader class WindowsBootstrap has length 4091
archiveReader class HpuxPlatformToolkit has length 13975
archiveReader class SolarisNativeToolkit has length 20355
Unable to find class: com.sun.wizards.core.MsgCat
Extracting...Using long form attribute offset calculation.
Time to find offset table: 10ms
......................................................................................Unable to find
class: com.sun.wizards.WizardResources_en
Unable to find class: com.sun.wizards.WizardResources_en_US
Initializing...VM: osName="Windows XP"
VM: osArch="x86"
VM: osVer="5.1"
osType=2
osName=0
arch=2
currentVersion is 5.1
platformNameClass=Windows_xpPlatformToolkit
Unable to find class: Windows_xpPlatformToolkit
Windows_xpPlatformToolkit does not exist.
trying to instantiate WindowsPlatformToolkit . . . success
systemInterface created.
writing native stuff to C:\WINDOWS\TEMP\
nativeProcessAvailable=true
com.sun.wizards.core.Def instantiated.
system locale = en_US
initial default locales = []
com.iplanet.install.util.wbResource::setResourceBundleKeyName: resource bundle key name is "locale.r
esources.DSSetup"
com.iplanet.install.util.wbResource::setResourceBundleKeyName: os name "" os type "Windows"
Unable to find class: locale.resources.DSSetupResources
Unable to find class: locale.resources.DSSetupResources_en
Unable to find class: locale.resources.DSSetupResources_en_US
Command line to be processed:
-debug
Unable to find class: com.sun.wizards.WizardResources_en
Unable to find class: com.sun.wizards.WizardResources_en_USHi,
Even I am facing the same problem (iPlanet 6.5 on windows XP)... After installing the web server, I tried to install the app server.. it installs the half way and get hunged up at "Please wait while your system is been updated"... it aslo asks for service pack which is other than SP1
Maybe you are looking for
-
How to save report output in a PDF file and also show preview in one processing cycle
Hi every body, We R re-developing an application from COBOL to Oracle. Using Reports 6i 6.0.8.11.3. The requirement is that whenever a user processes a report, it should be saved on disk say in PDF format. Then it should be shown in Reports Runtime P
-
In INDIA Capture of Multiple excise invoice at the time of Goods Receipt
We would like to capture multiple excise invoice at the time of Goods Receipt. The excise invoice number captured should be updated in the RG 23 register with individual entry of excise invoice number and Qty against that excise invoice. The total GR
-
Iphone 3G/3GS - TSR (Terminate and Stay Resident)
What is the best implementation method for writing the actual code as a TSR program?
-
Article document blocked by user
Dear SAP team, I am facing an issue as follows: Site can not reverse GR 5000000 Error message: User XXX blocks article document 5000000 SM12 was checked and there is nothing that user XXX is locking. What could be the problem? Any input is welcome.
-
I have two instances os SAP R/3, which one with one Content Server I have also the SAP Portals connect to DMS using SAP DMS Connector In the portal, through content management, I can see the originals files sotred in the Content Server. Buuut, using