System Update 5.02.0007 and RDP

TVSU 5.02.0007 show only splash screen and then closes when run on Windows 7 Enterprise 64 bit via Remote Desktop
In previous version you could set compatibility mode to XP SP3 for the TVSU.EXE and it would work, but if you do that on the current version, you'll get the error messages saying that you need Windows 7 to run the program.
Any workarounds for this problem?? It is VERY annoying
Best regards
HDM

Hi Customer,
This is a known limitation and we have below workaround:
under the TVSU installation directory, usually is =>C:\Program Files\Lenovo\System Update, here you can find a file named "tvsukernel.exe", under the remote control scenario , you can launch TVSU by double click of "tvsukernel.exe" instead of double click "tvsu.exe", so you can create a shortcut for "tvsukernel.exe" on the desktop, then use it to launch tvsu.Please test and feedback your result. Sorry for the inconvinient.

Similar Messages

T61 System Update changes Product Type and Product ID

Hi
My Notebook T61 has the following numbers
Type 6464-CTO XXXXXX 08/87
Product ID: 6464-V52
I try to make system update but System update shows instead of 6464-CTO Product ID V52 is this a mistake?
Now I want to make Bios update, there I can change it from V52 to CTO should I ?
Moderator Note: Serial number removed to prevent misuse.
Solved!
Go to Solution.

There are othere small Problems like battry is everytime 99% and sundly emty, and my notebook gets off. I would like to send it to Lenovo but I bought my Notebook in UK live here in Germany. Must I send my Notebook to UK? or where ?
I had T42, X31 and nere had such problems therefor I don't how and where to send my Notebook.

Problem after system update (base installed only) and other concern

I have had two strange problems upon updating from Arch using pacman.
1) My keyboard is no longer detected
2) The BIOS time seems to be eight hours behind. (Setting the clock to UTC from another distro sets the clock right since my time zone is GMT-8)
Does anyone have a work around?
Btw, here is rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="/usr/share/zoneinfo/America/Los_Angeles"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="myhost"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#gateway="default gw 192.168.0.1"
#ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond)
# End of file
I commented gateway="" and ROUTES="" since I am using dhcp.
I also have a concern about the latest kernel.
I decided to install and build the latest kernel (from a chrooted environment) and noticed that I got a kernel panic (upon trying to boot into arch) no matter what I did (about it not being able to mount the root filesystem from /dev/sdb2). I could enable old pciix support, but I got annoyed by the clock skew outputs when building. How are devices, particularly SATA drives, named and accessed now?
[edit]By the way, I have two separate kernel booting for Arch. Here's is my grub config for those
title Arch Linux
root (hd1,1)
kernel (hd1,1)/boot/vmlinux-2.6.16.arch root=/dev/sdb2
initrd (hd1,1)/boot/initrd26.img
title Arch Linux (modified kernel)
root (hd1,1)
kernel (hd1,1)/boot/vmlinuz-2.6.20 root=/dev/sdb2
Last edited by NoOneImportant (2007-02-13 23:16:22)

zeus wrote:
1) USB or PCI?
2) TIMEZONE="America/Los_Angeles"
3) What preceded a panic?
Most likely the name of disks was replaced. Look in output.
try Fallback image/ try UUID in grub/fstab
1) USB
2)I just tried to boot into arch and no dice.
3)
Starting balanced_irq
Using IPI Shortcut mode
VFS: cannot open root device "sdb2" or unknown-block(0,0)
Time: tsc clocksource has been installed.
Please append a correct "root=" boot option
Kernel panic -not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Last edited by NoOneImportant (2007-02-13 23:31:22)

Operating system update made all icons and fonts on my screen smaller. how to get back to original size?

I just upgraded my operating system on my Mac desktop. All the icons and fonts are smaller and hard to read. How do I get them back to pre upgrade size?

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***

Did system update--lost all texts and BBM texts

The latest update went smoothly enough, but when my Q10 woke up again, and I reconnected to my email accounts, my whole history of texts and BBM messages were gone! Did this happen to others?
Can anything be done?? Thanks for any help.

I was able to help some other users restore a previous backup to regain their lost SMS history.
I don't know why yours did not restore. Restoring the backup will always result in a need to update passwords as that is simply a security measure and to reinitiate your link to that account. Nothing uncommon there.
I wish I could help you with the lost SMS, but it sounds like you have done exactly what I would have advised you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

System Update Windows 7 Update Module KB2615763

System Update (5.02.0007) schlägt mir zur Installation folgendes Update vor: Windows 7 Update Module KB2615763.
Beim Versuch es zu installieren schlägt es fehl. Danach habe ich versuch es manuell zu installieren. Es erscheint das Fenster "Eigenständiges Windows Update Programm" und die Fehlermeldung "Das Update ist nicht für diesen Computer geeignet".
Finde ich sehr unschön. Wenn es nicht geeignet ist, warum wird es dann angezeigt? Könnte dieses Update das Problem beheben mit meiner externen USB 3 Platte, die nur an USB 2 Ports funktioniert?
Besten Dank für Eure Hilfe.
Thinkpad T530 (239237G)
Windows 8 x64
Samsung SSD 840

JamesAtlick schrieb:
System Update (5.02.0007) schlägt mir zur Installation folgendes Update vor: Windows 7 Update Module KB2615763.
Schaue erst einmal in Systemsteuerung - Programme und Funktionen nach, ob es nicht vielleicht schon installiert wurde.
Zum Patch:
Included QFE and the description are listed as below:
QFE#
Description of Software
2615763
"0x000000D1" Stop error when you connect a USB composite device to a computer that is running Windows 7 or Windows Server 2008.
Quelle
Siehe auch: http://support.microsoft.com/kb/2615763
Unter den Link zu "Quelle" findest Du auch den Patch zum manuellen Download sowie die Installationsanleitung.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Storage system verify or repair failed,cannot download system updates,in ColorSynk found 4 bad profiles, in ITunes I still see my old Apple ID. What I can to do ,please identify it for me.

I have changed my Apple ID and may be anything wrong did with Disk Utility.
So , I could not download system updates by normal way and downloaded them from Apple site via Folx and have them installed thus.
I have tried check out condition of Toshiba disk and got messages of errors.
What can I do in this situation?
In Disk Utility:
Storage system verify or repair failed.
Problems were found with the partition map which might prevent booting.
Problems were encountered during repair of partition map
S.M.A.R.T status verified
In ColorSynk Utility:
Searching for profiles...
Checking 64 profiles...
/Library/Application Support/Adobe/Color/Profiles/RedBlueYelllow.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/Smokey.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Prosystem ufiles/TealMagentaGold.icc
   Tag 'pseq': Required tag is not present.
/Library/Application Support/Adobe/Color/Profiles/TotalInkPreview.icc
   Tag 'pseq': Required tag is not present.
Verify done - found 4 bad profiles.
In ITunes :
I see my old email as Apple ID
I going to change Lion OS to Mountain Lion OS ,is there any troubles ahead because of problems described above? And how to fix all that ?
Thank you in advance.
Message was edited by: TatianaTia

PS
In Disk Utility all looks so:
Verifying partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were found with the partition map which might prevent booting
Error: Storage system verify or repair failed.Verifying and repairing partition map for “TOSHIBA MK5065GSXF Media”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Reviewing boot support loaders
Checking Core Storage Physical Volume partitions
Checking storage system
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
I will be greatly appreciated for any considerations or advise (*.*)

System Update 3.14 install fails on action: SetVendorValue

Hi, folks:
I'm attempting to install System Update 3.14 for the first time on a 2004-vintage ThinkPad T42 type 2379-DXU. The immediate failure appears to be that the action "SetVendorValue" fails. I'm not sure what the underlying cause is. The installation terminates with an alert that installation failed and the system is unchanged; but in fact the System Update application is installed and there's an icon in my Start menu. When I try to run System Update, it displays an error message in front of the splash screen and quits.
Details and log excerpts below. Can anyone figure out why the install is failing? How can I get the install to succeed and the System Update app to run successfully? Thanks in advance for any ideas.
In the meantime, I'm going to try downloading individual drivers manually, to solve my underlying problem. But I'd sure like to have System Update on my side in the future.
--Jim DeLaHunt, Vancouver, Canada
Details* run the installer "systemupdate314-2008-5-15.exe".
* installation proceeds through several steps. Shortly after the "Writing vendor value" status message appears, the installation fails with an error alert saying that that installer cannot complete and the system is unchanged.
* in fact, there is now a c:\Program Files\Lenovo\System Update\ folder, and a System Update icon under Start menu -> All Programs -> ThinkVantage -> System Update.
* clicking the System Update icon in the start menu causes the program to launch and fail. The splash screen appears, then an alert "System Update could not start properly [OK]". Clicking [OK] causes the program to exit.
Log exceprts:
The apparently relevant bit of the install log C:\Documents and Settings\<user>\Local Settings\Temp\tvsuSetup.log reads,
.... [front 90% of log omitted] ...
Action 22:35:32: reloadsched.exe. reloadsched.exe
MSI (s) (14:B8) [22:35:32:402]: Executing op: CustomActionSchedule(Action=reloadsched.exe,ActionType=1122,,Target=C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe,)
MSI (s) (14:B8) [22:35:32:432]: Note: 1: 1721 2: reloadsched.exe 3: 4: C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe
Info 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: reloadsched.exe, location: , command: C:\Program Files\Common Files\Lenovo\Scheduler\reloadsched.exe
MSI (s) (14:B8) [22:35:32:432]: Executing op: ActionStart(Name=InstallFinalize,,)
Action 22:35:32: InstallFinalize.
MSI (s) (14:B8) [22:35:32:432]: Executing op: CleanupTempFiles(TempFiles=C:\WINDOWS\Installer\11f23a.mst)
MSI (s) (14:B8) [22:35:32:432]: Scheduling file 'C:\WINDOWS\Installer\11f23a.mst' for deletion during post-install cleanup (not post-reboot).
MSI (s) (14:B8) [22:35:32:432]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=43819590)
MSI (s) (14:B8) [22:35:32:682]: User policy value 'DisableRollback' is 0
MSI (s) (14:B8) [22:35:32:682]: Machine policy value 'DisableRollback' is 0
Action 22:35:32: RollbackCleanup. Removing backup files
RollbackCleanup: File: C:\Config.Msi\11f23e.rbf
MSI (s) (14:B8) [22:35:32:702]: Calling SRSetRestorePoint API. dwRestorePtType: 0, dwEventType: 103, llSequenceNumber: 402, szDescription: "".
MSI (s) (14:B8) [22:35:32:702]: The call to SRSetRestorePoint API succeeded. Returned status: 0.
MSI (s) (14:B8) [22:35:32:702]: Unlocking Server
MSI (s) (14:B8) [22:35:32:702]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
Action ended 22:35:32: InstallFinalize. Return value 1.
MSI (s) (14:B8) [22:35:32:702]: Doing action: SetVendorValue
Action 22:35:32: SetVendorValue. SetVendorValue
Action start 22:35:32: SetVendorValue.
MSI (s) (14:34) [22:35:32:713]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI25.tmp, Entrypoint: SetVendorValue
6/29/2008 22:35:32 DualSkins set to 0
6/29/2008 22:35:32 szValue set to THINK
6/29/2008 22:35:32 Unable to set key value: Vendor
Action ended 22:35:32: SetVendorValue. Return value 3.
Action ended 22:35:32: INSTALL. Return value 3.
... [snip]...
MSI (s) (14:B8) [22:35:32:953]: Attempting to delete file C:\WINDOWS\Installer\11f23a.mst
MSI (s) (14:B8) [22:35:32:953]: Unable to delete the file. LastError = 32
MSI (s) (14:B8) [22:35:32:963]: MainEngineThread is returning 1603
MSI (s) (14:04) [22:35:32:963]: Destroying RemoteAPI object.
MSI (s) (14:68) [22:35:32:963]: Custom Action Manager thread ending.
MSI (c) (E8:10) [22:35:32:973]: Back from server. Return value: 1603
MSI (c) (E8:10) [22:35:32:973]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E8:10) [22:35:32:973]: PROPERTY CHANGE: Deleting SECONDSEQUENCE property. Its current value is '1'.
Action ended 22:35:32: ExecuteAction. Return value 3.
MSI (c) (E8:10) [22:35:32:973]: Doing action: SetupCompleteError
Action 22:35:32: SetupCompleteError.
Action start 22:35:32: SetupCompleteError.
Action 22:35:32: SetupCompleteError. Dialog created
MSI (c) (E8:18) [22:35:40:544]: Doing action: ISSetupFilesCleanup
Action 22:35:40: ISSetupFilesCleanup.
Action start 22:35:40: ISSetupFilesCleanup.
MSI (c) (E8:AC) [22:35:40:544]: Invoking remote custom action. DLL: C:\DOCUME~1\JIMDEL~1\LOCALS~1\Temp\MSI26.tmp, Entrypoint: SFCleanupEx
Action ended 22:35:40: ISSetupFilesCleanup. Return value 1.
Action ended 22:35:40: SetupCompleteError. Return value 2.
Action ended 22:35:40: INSTALL. Return value 3.
... [snip] ....
=== Logging stopped: 6/29/2008 22:35:41 ===
MSI (c) (E8:10) [22:35:41:175]: Note: 1: 1708
MSI (c) (E8:10) [22:35:41:175]: Product: System Update -- Installation operation failed.
MSI (c) (E8:10) [22:35:41:195]: Attempting to delete file C:\DOCUME~1\JIMDEL~1\LOCALS~1\Temp\11ce5a.mst
MSI (c) (E8:10) [22:35:41:195]: Unable to delete the file. LastError = 32
MSI (c) (E8:10) [22:35:41:195]: Grabbed execution mutex.
MSI (c) (E8:10) [22:35:41:195]: Cleaning up uninstalled install packages, if any exist
MSI (c) (E8:10) [22:35:41:205]: MainEngineThread is returning 1603
=== Verbose logging stopped: 6/29/2008 22:35:41 ===
The log from the failed startup of TVSU at
C:\Program Files\Lenovo\System Update\logs\tvsu_log_080629230655.txt
reads:
[ThinkVantage System Update build: 2008-5-15 3.14.0008] 6/29/2008 11:06:55 PM
Severe 2008-06-29 , 11:06:55
at Tvsu.Util.RegistryUtil.Execute(String[] args)
Message: Error occurred in registry operation, error message: Access to the registry key 'HKEY_LOCAL_MACHINE\Software\Lenovo\System Update' is denied.
Severe 2008-06-29 , 11:06:55
at Tvsu.Util.RegistryUtil.Execute(String[] args)
Message: Error occurred in registry operation, error message: Access to the registry key 'HKEY_LOCAL_MACHINE\Software\Lenovo\System Update\Preferences\UCSettings\RunTime' is denied.
Severe 2008-06-29 , 11:06:55
at Tvsu.Gui.GUIManager.StartGUI()
Message: Exception not expected was received.System.NullReferenceException: Object reference not set to an instance of an object.
at Tvsu.Environment.EnvironmentManager..ctor()
at Tvsu.Environment.EnvironmentManager.get_Instance()
at Tvsu.Gui.GUIManager.InitializeGUI()
at Tvsu.Gui.GUIManager.StartGUI()
Severe 2008-06-29 , 11:06:55
at Tvsu.Gui.FlowScreens.Messages.SetButtons(Int32 formwidth)
Message: No Nls object was found, using hardcoded 'OK'
Exception:
Message: Object reference not set to an instance of an object.
Type: System.NullReferenceException
at Tvsu.Gui.FlowScreens.Messages.SetButtons(Int32 formwidth)
Info 2008-06-29 , 11:06:55
at Tvsu.Gui.FlowScreens.Messages.ShowStaticMessage(String message, String title, String mastheadtext, MessageType t, Boolean check)
Message: Showing ERROR Message: < System Update could not start properly. >
[End of details]

Well, the problem is solved, and System Update is installed and working.
The root cause of the problem appeared to be that the registry directory HKEY_LOCAL_MACHINE\SOFTWARE no longer extended "full control" permission to the Administrators user group on my machine. We fixed this by using regedit:
Start... Run... regedit....
select directory HKEY_LOCAL_MACHINE\SOFTWARE, right-click, Permissions...,
press Add... button
enter SYSNAME\Administrators in the text area (SYSNAME is a placeholder for my actual machine name)
OK... OK...
Quit regedit
We diagnosed the problem with the help of IT support from our employer. The problem was blocking installation of new anti-virus software. We had just removed old anti-virus and "internet security" software. Hmm, I wonder if the old security software removed this permission setting as a parting gift.
Hope this is helpful for others who encounter the same symptoms.

How to Clear System Update Status

ThinkVantage System Update is repeatedly downloading and installing the ThinkPad Hotkey Integration Package. It tells me I have V 3.10.0000 installed and that the new version is V 3.11.0001. I allow it to install, but when I run TVSU again, it offers the same update. I've tried deferring the install and then installing offline, but nothing seems to work.
I've seen this issue with Windows updates and I know how to resolve it, but this is something completely different. Any ideas would be appreciated.
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask

Hi,
if you do this, then you get an error:
[ThinkVantage System Update build: 2010-6-3 3.14.0029]   21.09.2010 20:01:25
Info   2010-09-21 , 08:01:25
   bei Tvsu.Environment.EnvironmentManager..ctor()
   Message: Starting Environment Manager...
Info   2010-09-21 , 08:01:25
   bei Tvsu.Nls.NlsResources..ctor()
   Message: Starting the instance of NLS@Runtime
Severe   2010-09-21 , 08:01:25
   bei Tvsu.Nls.NlsResources..ctor()
   Message: Error loading NLS at runtime
   Exception:
       Message: Ein Teil des Pfades "C:\Programme\Lenovo\System Update\session\system\SSClientCommon\MappingInterface.xml" konnte nicht gefunden werden.
       Type: System.IO.DirectoryNotFoundException
           bei System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   bei System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   bei System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)
   bei System.Xml.XmlDownloadManager.GetStream(Uri uri, ICredentials credentials)
   bei System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)
   bei System.Xml.XmlTextReaderImpl.OpenUrlDelegate(Object xmlResolver)
   bei System.Threading.CompressedStack.runTryCode(Object userData)
   bei System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   bei System.Threading.CompressedStack.Run(CompressedStack compressedStack, ContextCallback callback, Object state)
   bei System.Xml.XmlTextReaderImpl.OpenUrl()
   bei System.Xml.XmlTextReaderImpl.Read()
   bei System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace)
   bei System.Xml.XmlDocument.Load(XmlReader reader)
   bei System.Xml.XmlDataDocument.Load(XmlReader reader)
   bei System.Xml.XmlDocument.Load(String filename)
   bei System.Xml.XmlDataDocument.Load(String filename)
   bei Tvt.Mapping.MappingParser.parse()
   bei Tvt.Mapping.MappingParser..ctor(String file)
   bei Tvt.Nls.LanguageLoader.Load(String nlsLanguagesDir, String mappingInterfacePath, String defLang, String ovrLang)
   bei Tvt.Nls.LanguageLoader..ctor(String nlsLanguagesDir, String mappingInterfacePath, String defLang)
   bei Tvsu.Nls.NlsResources..ctor()
Severe   2010-09-21 , 08:01:27
   bei Tvsu.Gui.FlowScreens.Messages.SetButtons(Int32 formwidth)
   Message: No Nls object was found, using hardcoded 'OK'
   Exception:
       Message: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt.
       Type: System.NullReferenceException
           bei Tvsu.Gui.Util.ResourceManager.GetString(String str, String[] wildcards)
   bei Tvsu.Gui.FlowScreens.Messages.SetButtons(Int32 formwidth)
Info   2010-09-21 , 08:01:27
   bei Tvsu.Gui.FlowScreens.Messages.ShowStaticMessage(String message, String title, String mastheadtext, MessageType t, Boolean check)
   Message: Showing ERROR Message: < System Update has detected a serious problem loading language files and can not continue. Please contact the Lenovo Support Center. >
Severe   2010-09-21 , 08:01:39
   bei Tvsu.Gui.GUIManager.StartGUI()
   Message: Critical Nls problem detected.
   Exception:
       Message: An error occured loading NLS
       Type: Tvt.Nls.LanguageNotFoundException
           bei Tvsu.Nls.NlsResources..ctor()
   bei Tvsu.Nls.NlsResources.get_Instance()
   bei Tvsu.Gui.GUIManager.InitializeGUI()
   bei Tvsu.Gui.GUIManager.StartGUI()
Regards
System: R500 2714A9G - Win 7 Prof. 64-bit

T43p Running System Update results in popup to install "Warbirds classic"???

Since running System Updates beginning in late March '09, during the downloading of any updates, sudden there appears a popup screen requesting that I OK the installation of something called "Warbirds Classic" or "Classic Warbirds". I have absolutely NO interest in any such application or software as is being fiosted upon me with this popup message, and therefore I take whatever steps are needed to deny, refuse and stop or reverse the attempted installation of said "Warbirds" junk. This then results in the failure of the Lenovo System Update to run satisfactorily and complete the Updates for my T43p laptop that Lenovo is suggesting and recomending that I install into my T43p to keep it current and updated. Each and every time I run Lenovo's System Update I am hit with this "Warbirds Classic" popup "to install" message crap; causing the failure of my ability to update the laptop via the System Update website when I refuse to accept or install the "Warbirds Classic" crap.. This is the ONLY case or instance where I am seeing this problem, all the other update websites I use to update my laptop from other software provider's websites DO NOT exhibit this problem and the updates are successful.
Question: Is this "Warbirds" junk just spam, a vidrus/trojan or some kind of joke coming out of Lenovo to sell us somthing? This problem is NOT allowing me to update various drivers and ThinlPad applications on my laptop, My research on the web suggests that the "Warbirds Classic" is somekind of on line gaming stuff...of which I have absolutely NO interest in.
How do I get rid of the problem described above, and get the Lenovo System Update functioning correctly as it once did prior to the appearance of this problem? Various virus and spybot scanners do not seem to detect this "Warbirds" thing as being installed on my system in any location or form that can be removed. Even when I re-imaged the system onto a new hard disk the above described problem suddenly showed up after several update sessions on the Lenovo System Update's website while updating the fresh and "cleanly' imaged TP43 operating system.
Lenovo was and IS ABSOLUTELY NO help what-so-ever regarding this issue...nor did they show the least regard for, or any interest in the fact that was causing the problem as described above. ( they WILL however be most happy to take considerble sums of money from your pocketbook to let you attempt to tell them about it.) Hopefully someone on this forum will have also experienced the problem and/or have good insight into what this problem is and how to effectively remedy it.
please help,
djm2349
19 Oct. 2009

This is the first time I've heard of TVSU trying to install something other than updates. TVSU runs via dotnet framework and doesn't use popups.
One thing to try is to uninstall TVSU, and manually delete the folder "system update" in the Lenovo or Thinkvantage folder, then download a new build of TVSU.
http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html
The support site is having issues right now, so check back to the
link above.
Terry
Lenovo Enterprise System Experts.

System update won't update

I had to do a factory restore and since then no matter what package either I manually install or system install , for system update for Lenovo 3000 N200 0769-alu notebook,, system update still gives run time error code. I have installed and re installed every package offered from when my system was bought in December 2007, one by one from the bottom to the top and the top to the bottom and still runtime error on system update.. Rescue and recovery has also been installed and uninstalled from the bottom to the top, and still only get the old very first rescue and recovery before all the perks came to it in 2008 and 2009. I know system update did a major overall and is now linked through message plus which has also been installed and re installed and all the WER patches show up in cmd as installed ,, But this manual crap is for the birds ,, I just want the system update to update when needed.. Also the bios is showing as updated so that went in okay etc etc. Any moderator have a quick link to a package to solve this problem ,, I have perused the downloads, drivers and software package center for 2 weeks now, uninstalling and re installing various or all of Lenovos packages but still a big runtime error on system update.. The factory restore was all because MS ordered me to do it as it was the only way to get the SP2 Vista update in and after they had totally messed up the system with all there co-pilot wonderful Indian techs screwing around in there trying to get the sp2 update in.. Before that everything was fine.. Now they blame Lenovo,, which is crap, but anyway Mr. and Mrs. Lenovo,, anyone got a quick link for the correct system or the latest system update software package for Lenovo System update .. The 3.14 is the one with the runtime error code.. Any solutions ,, I do like my system current and up to date.. Thanks
jenak 100

The problem is yaourt https://bugs.archlinux.org/task/27334

Thinkvantage System Update 3.14.0031 Failure

T400. Vista
Ran SU and received message notice "Your copy of SU needs to be updated". When I click OK, the download tries to begin, but immediately get error box "system failed to download. Make sure you have an active network connection".
Close.
Next message box "SU failed to install. You can also install from lenovo.com/support."
I downloaded System Update 3.14.0031 and installed. Rebooted and ran getting the same result as above.
Edit: Same problem on a different computer running XP. Must be an issue at lenovo.
Solved!
Go to Solution.

rtb, welcome to the forum,
I also had problems with v3.14.0031 earlier today, it now seems to be working as designed.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Cannot install System Update 4 on Thinkpad W520 running Win7 Prof 64

I am having problems installing system update 4. I originally installed it and had the problem with running it and getting the tvsu error message that is addressed in another thread.
I uninstalled it then ran two registry optimizers and reinstalled .Net and now I can't even install it. When I do I get the following:
This setup will perform an upgrade of '!@^'. Do you want to continue? Yes or No.
I click Yes and it runs some more until this pops up:
Error 2753. The File 'startsuservice.exe' is not marked for installation.
Click OK then the installation program finishes but does not complete. I even tried to uninstall and reinstall the entire toolbox and that does not work.
I have a W520 running Win7 64.

Thanks for the thoughtful response. See my answers in bold.
sclexman wrote:
You opened this thread in June 2012, and Now you are back to give us an update.
Slicing and dicing the registry is NOT the solution. Why not, if you know what you are doing? Guess the MSI installer is not the answer. I would NEVER use a registry cleaner, EVer. It over cleans. No argument there.
(1) Does programs and features show System update installed? No IF so try to uninstall.
(2) Install System Update 5.0.2 and post the results. Won't install. If it did, what results would I post? Install on top of version 4 and see what happens. SU is not installed. Support of your laptop does NOT show version 4 available for download.
(3)This system was factory shipped win 7 (released feb 22,2011) did system update ever work out of the box? No.
(4) What version of . Net installed? v4 3.5 SP 1 is needed. NO need to uninstall/reinstall. You are overworking yourself. Agreed
===
You state you used 2 registry cleaners, and from feb 2011 until your June 2012 post, was all well with your system? Yes, a couple of other problems were actually fixed but not this one. Based on all of the experts disdain for these cleaners, I guess I was lucky that they didn't cause more problems.
I would backup your user data and factory install. No, too much work. See foot, it has a hole in it. ?????
When did you receive this laptop, like before June 2012? purchase date? June, 2011
==
Your original post:
I originally installed it and had the problem with running it and getting the tvsu error message that is addressed in another thread.
When did you run registry cleaners? Approx. between 6/11 and 6/12. After the tvsu error message that is addressed in another thread? Yes
==
Your most recent post referred to a workaround. This involves SU version 5. It wont reinstall, seems SU service (old) pointing to non existent folder. New SU just released. You are version 4. So? Any version I try to install fails with the same message.
==
I do problem determination on main frames. Been doing it for 30 years. I did the same early in my career. Gather the facts. In your case, original, , System update msg error. Did something else occur(registry cleaner). Some times the interview points to the most simple solution. Oh, really? The easy fix would be to bypass the point in the install process that is pointing to a previous version that does not exist or find the offending registry entry that is deceiving the install process and delete it. But I can't do that because I am not a MS/PC software engineer and I can't seem to find one who can help. OH, change parm=0 to parm =1 or install the newer version. Where? Simple. You over killing it.
What I like to call tourist Information...(couch potato), .. so. bottom line, in June 2012, version 4 SU gave me a error message. That is where we start. That would be nice but no one has ever solved the original problem in this forum.

How do I Re-Install Lenovo System Update

Hi guys, System Updated crashed everytime I ran it so I posted a note asking for help well now I have a new "problem", I am unable to run System Update, when I do I get an error message advising "you can only run one instance of System Update at a time and System Update is aready running". That would be fine except System Update is NOT running so whatever glitch I had before has morphed into this latest glitch and my question is, can someone please advise me HOW TO RE-INSTALL SYSTEM UPDATE?
Thanks,
Bob

check out for any reigistry entires where system update is still present...it requires .net framework 2.0 to run i guess if its not opening do one thing install it and use the automated recovery solutions where you can find a direct link for running system updates
fcourse you must be having system update installed on your computer first!
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

I need to register my computer to receive notification of system updates?

I need this information, if I don´t need to register, please tell me
Thanks

All applicable system updates will be identified and called to your attention by the Software Update application, which runs automatically by default.

System Update 5.02.0007 and RDP

Similar Messages

Maybe you are looking for