System update 5.03 for T520i 4239CTO running windows 7 64-bit does not execute

Hi, I've just installed the latest Lenovo system update software but it does not run properly. I just get the initial popup screen showing the version but nothing else happens. Looking at the event viewer I see an error saying "Retrieved null machine type model". Any advice on how to resolve this ?
Tx,

Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
* [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
* [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help]

Similar Messages

ITunes 10.1.1 for Windows (64-bit) Does Not Run After Installation

I recently upgraded my laptop to Windows 7 and downloaded the 64-bit installer (iTunes64Setup). Although I recieve the notice that it was installed, when I start it up, I receive the "iTunes Library.itl cannot be read..." error message whenever I try to start it.
I have uninstalled the program, deleted the original setup file (iTunes64Setup), downloaded it again and re-installed it twice with no success.
Is there something I am doing wrong? Any assistance is greatly appreciated.
Thanks,
John

Finally got it installed and running.

Windows 7 - "System update 4.0" for Lenovo N500 ?

Hello.
There is available new "System update 4.0" for Windows 7 but it has no support for N500, although "List of Windows 7 upgrade capable systems" has it.
When will there be available Windows 7 drivers for Lenovo N500? When will "System update 4.0" have support for N500?
Thank you.
Note from Moderator: Please don't post the same message in multiple boards/threads as it splinters the discussion. Duplicate(s) removed.

indenti,
The N500 is part of the valueline of products, and I believe that our present direction is that TVSU 4.0 is supported only on the ThinkPad systems.
The recommended action would be to manually download and install updated Win 7 drivers from the N500 driver matrix page as they become available.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Update kernel steps for IDES 4.7 - Windows - MS SQL SERVER 2000

Hello,
Concerning updating the kernel - for IDES 4.7, Windows, SQL SERVER 2000 - is there a way to locate exactly the.SAR files - for the database dependent & database independent parts - which are compatible with the used SAP version.
Also, does updating the kernel involve only the following:
- Downloading the .SAR file.
- Taking a backup copy of the exe/run folder's content.
- Stopping the SAP system and all related services.
- Unpacking the .SAR files using the SAPCAR utitilty,
i.e. are there any specific steps to be done after the unpacking ?
Thanks in advance.
Reda Khalifa
IT Department - Almansour Automotive Group - Egypt

Hi Reda,
I guess You want to upgrade kernel from 6.20 to 6.40.
Go to service.sap.com -> downloads -> SAP Support Packages -> Search for SP and Upgrades -> enter "kernel 6.40" and follow the link "kernel 6.40 32-BIT".
On next window choose from location :SAP KERNEL 6.40 \ Windows Server \ Database independent following SARs (title):
-      enq
-      disp+work package
-      dsrlib
-      enserver
-      librfc
-       MMC (optional)
-      Kernel Part I (for Basis 640/620/610) Q1/2007 (very important)
-       saposcol
From location:SAP KERNEL 6.40 \ Windows Server \ MS SQL Server choose following SARs:
-      Database Library
-      R3LOAD
-      R3load Control
-       Kernel Part II (for Basis 640/620/610) Q1/2007 (very important)
Unpack it to newKernel directory and copy it to \exe\run directory.
Next step Frank Deijkers already wrote.
On the end of upgrade go to \exe\run catalog and run sapstartsrv.exe program for registering new service and COM library.
Regards,
Marcin

System Update 4.0.0046 install fails on Windows 7 SP1

I just tried updating my Lenovo System Update to the latest version compatible with Windows 7 SP1 (version 4.0.0046), and it fails every time with the following error:
Windows cannot find 'C:\Users\DARREN~1.STI\AppData\Local\Temp\pftD0BB.tmp\setup\pasinst.exe' Make sure you typed the name correctly, and then try again.
I looked in the 'pftD0BB.tmp' folder and there is no 'setup' folder, so I'm guessing this is an error in the installer?
Any ideas? Definitely want to get this up and running again.
Thanks,
Darren David

It's no longer (sadly) surprising to me that this issue has not been publicly addressed and that I experienced the same issue with 4.0.100.1124 today.
Here is what worked for me. I don't have the bandwidth to test this again, nor is it likely the most direct method (I'm sure several of these steps are redundant). And I hate authoring instructions for just about anything. Just my blundering path to a non-failing installation.
1. Downloaded the systemupdate40-2011-02-18.exe from the Lenovo support site.
2. Ran systemupdate40-2011-02-18.exe and was presented with the "Windows cannot find..." love note.
3. Unpacked systemupdate40-2011-02-18.exe (I use winrar) to a folder on the desktop (e.g. \sysupdate\)
4. Ran setup.exe within that folder...same failure to find psainst.exe
5. Located and executed psaddZip.exe within same folder. This unpacks to a \setup folder with, surprise surprise, psainst.exe within.
6. Ran setup.exe again. Successful installation.
System Update 4.0.1.x.whatever ran, checked, and updated beautifully, and then BSOD'd on restart. But I'm still here.
Your mileage will most certainly vary.
wws

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

I update my iTunes in my PC running window 7 today and immediately afterthat iTunes programme hauled. What shall I do???

I update my iTunes in my PC running window 7 today and immediately afterthat iTunes programme hauled. What shall I do??? Can somebody help me??

Hey yeow28,
Thanks for the question. I understand that you are experiencing issues after updating iTunes for Windows. The following article may provide a solution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

OS X 10.8.1 update cannot be installed on this disk. This volume does not meet the requirements for this update.

HI
I had installed mountain lion on my MBP 13" early 2012, but it has lots of issue, when i tryed to up date to 10.8.1 it shows the error "OS X update cannot be installed on this disk. This volume does not meet the requirements for this update"
if i run the software update nothis is showing, current os version is 10.8

This did not work for me.
Note, that at one point the Apple developer knew exactly what the problem was and decided not to let us know. If we were tole what the problem was we woud have an idea of how to proceed.

Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress

latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.

Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

My hard-drive crashed, I own lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium

My hard-drive crashed, I own Lightroom 5, where can I download it again t re install it. The ADOBE email I had has links that no longer work (thanks for that). Running Windows 7 Home Premium

Hello Andrea,
did you try this: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=DT EML
What concerns your eMail you should talk to Adobe, please have a look there: http://helpx.adobe.com/de/contact.html by clicking throug their questions and if "open" please use chat, I had the best experiences.
Hans-Günter

HT204406 Please help! I have downloaded the 64 bit version of iTunes for my Sony running WIndows 8. I have iTunes running on 3 other machines (MACs) with no issue. On the Sony with WIndowns everytime I turn on ITunes Match WIndows fails, everything shu

I Have downloaded the 64 bit version of iTunes for my Sony running Windows 8. Install went fine and I can get in to iTunes and see the music residing on this machine. However, everytime that I try to run iTunes Match Windows crashes. So frustrating. BTW, this worked fine until a couple of weeks ago. Anyone know what's going on?

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

HT4623 I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP

I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP

Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Instant Client on 64-bit Windows 7: Driver does not appear in System DSN

Instant Client on 64-bit Windows 7: Driver does not appear in System DSN tab when creating a new Data source.
What I did so far:
I downloaded the basic and odbc zips for Window 64-bit.
Unzipped the basic zip.
Unzipped the odbc zip to the same directory.
Added the dir path to the System Environment Variable called Path.
Double-clicked on the odbc_install.exe to run it from Windows Explorer.
Then I tried to add the driver to create a new data source but it does not appear in the list of drivers.
From a cmd window, I navigated to the instant client directory and tried to run odbc_install again.
I got the message: Oracle ODBC Driver with same name already exists.
What am I missing?

hello, I did it like that you say,but the result also is "oracle odbc driver with same name already exists". I don't kown what can I do it ,Thank you!

Process for billing the customer if the repair does not fall under warranty

Hello,
I got one issue related to repair process, We have restricled the item quantity to only one at item categoty level. BUt i am facing the below problem with my cklient
what is best practice for billing the customer if the repair does not fall under warranty?
Please suggest which process i suggest to client

Hi there,
When you mean warranty, where is that updated in the system? In any master data or Z table?
Usual practise is basing on the serial num of the material. From the serial num, users will be able to back track from which sales order this material is initially delivered to the customer. The info is stored in standard tables (for eg EQUI)
One way of doing this is to define a 100% discount condition type in your pricing. Thsi discount will apply only when the customer is in warranty. For this you will need to write a code in teh requirement routine for that condition type in V/08. If warranty is stored in a Z table, then call that Z table & compare it with your sales order. If yes, only then 100% discount will apply & repair cost will be zero. Else, repair charge will be billed to customer.
It depends how your business will monitor repairs. If they raise a service order, then you will need to define a service pricing procedure in which you will include the 100% discount. In this case service order is always referenced with ref to a sales order.
Regards,
Sivanand

System update 5.03 for T520i 4239CTO running windows 7 64-bit does not execute

Similar Messages

Maybe you are looking for