System Update 5 not detecting drivers for M92P (2988-A6U)

I've installed our corporate image (Windows 7 SP1 - 64bit) which has an older network driver installed. 11.12.36.0
The latest driver from Lenovo's web site is 11.15.16.0 which installs without a problem.
So i re-imaged again with the older driver 11.12.36.0 and figured that the easiest way to update the driver(s) would be to use System Update 5. 
To my surprise when i ran system update it returns the following:
"No packages applicable to your system were found"
No i know i could just fix the image and install the driver during the image process but I want to use System Update.
Does anybody have a clue as to why System Update is not detecting the needed drivers?
Has anybody had any success with running System Update 5 on a Windows 7 sp1 64-bit machines?
Thanks-

Unfortunately right now it appears that the 11.15.16.0 version of that driver does not have TVSU support yet.  Once the content team completes the process of creating and testing the package through TVSU, it will be published for customers.  I'll try to find out where this one falls in the queue. Sorry for the inconvenience.

Similar Messages

  • Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

    I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

    It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
    Regards.

  • TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

    I seem to have lost fax capability with Snow Leopard.
    Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
    Initially said it was downloading software but no longer does this. Fax test works on HP site.
    Using HPC410aHP Photosmart Premium
    Any help would be appreciated.
    Bob Wines.

    Thanks for your detailled description of the faxmodem installation!
    I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
    I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
    Does anybody know, if send faxes are saved somewhere?

  • The operating system can not detect my wireless device!

    Hi all,
    I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

    The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
    IT Specialist and Consultant
    Lenovo Tablet Evangelist
    Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
    Deutsche Community   Comunidad en Español
    Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • Automatic updates not detecting latest version

    I could not find a mention of this in the forums or the bug database.
    I have noticed for a few months now...going back to at least the update from Update 6 to Update 7:
    The automatic update function does not work. Going to the Java control panel applet, it reports version 1.5.0 (build 1.5.0_07-b03), however it says that I have the latest version of Java for this platform (Windows XP).
    Is there a workaround for this problem? This problem makes keeping several machines updated a PITA.
    Is the java bug database the place to report this problem? If so, is it already there?
    It's strange to only see articles mentioning this problem very recently:
    http://blog.washingtonpost.com/securityfix/2006/08/sun_acknowledges_major_oops_in.html
    david

    In addition to the automatic updates not detecting that Version 1.5.0 (build 1.5.0_07-b03) is not the latest Update 9, the official site, java.com, has old downloads, as well.
    Both the Download Now link and the Manual Download links to Version 5.0 Update 6.
    ??

  • Satellite A205 S4797 - can not find drivers for my drive

    I have recovery disks and Windows Vista installation disk. When I try to install error meesage says it can not find drivers for my drive.
    I tried scannong CD drive and it cannot find them do 32-bit, 64-bit all have different drivers and if so where do I get the one I need if not from the install disk or recovery disk from manuf.?

    If you cannot use original Toshiba recovery DVD for OS installation I can imagine there is some problem with DVD itself (some missing file or scratch) but Microsoft Vista installation MUST work on this notebook model.
    If this doesnt work too there must be some problem with HDD. Just if you want to install WXP you need to load SATA driver at start-up but Vista must work.
    Can you please tell me what happen when you try to install Vista from Microsoft Vista installations DVD?

  • Can not find drivers for keyboard!!!

    why can i not find drivers for my wireless keyboard (model:gm322aa, product: gm322aa)? I need the drivers for windows 7 64-bit.

    Hi, I am attaching the site to assist you with your keyboard.  Hope this helps.
    http://h10025.www1.hp.com/ewfrf/wc/product?product=3454478&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
    Was your question answered? Mark it as an Accepted Solution!
    If I was able to help...Give it a Kudos!
    Thank you

  • SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

    Hi Experts,
    Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
    I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
    Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
    1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
    2) If not, Why system did not prompted me for a transport?
    3) Then How Can I attach my CDM/changes to a transport?
    Thank you

    I don't think we get a TR prompt when adding a view in BD64.
    You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ?

  • System did not prompted me for any Transport,when i added IB param in WE20?

    Hello
    I have added 2 inbound parameters to existing Partner profile (type is 'LS') in WE20 transaction, but, system did not prompted me for any transport request!!
    When i checked EDP21 table, my entires are saved in this table.
    Why systme is did not prompted for TR? How to get them into a TR and get them into QA?
    Thank you

    Hi,
    if you look in TABLE MAINTENANCE GENERATOR DIALOG for table EDP21, then you can see, there is setting
    no, or user, recording routine
    Regards,
    Klaus

  • System Update not working correctly

    Hi forum,
    System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
    1: Not detecting old versions
    SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
    2: Not installing a suggested update
    Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
    3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
    Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
    Regards
    AH_DE

    Dear Herik,
    thanks for your answer.
    I checked the log  file and found thousands of entries. Here are the lines related to "Fix for ...".
    Info    2010-02-03 , 08:40:37
              bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
              Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
    Info    2010-02-03 , 08:40:43
              bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
              Message: Candidate list:
    Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
              Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
    ADDITIONAL ENTRIES 
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
              Message: System updated:
              Installed=0
              Not Installed=Tvsu.Beans.Update[]
              Deferred=0
              Download Failed=0
              Hidden=0
    Severe          2010-02-03 , 08:41:17
              bei Tvsu.Sdk.SuSdk.ShutDownApplication()
              Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
    Since I'm a normal user only, I can't interprete this information. Do you know what to do?
    Kind Regards
    AH_DE

  • Windows Update installed the drivers for the wrong sound card?

    I need serious help with this one.
    It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
    But wait, it gets even more frustrating.
    So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
    However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
    So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
    This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
    Windows 7 x64
    Sound Blaster Li've! 24bit
    I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
    Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

    Click on Start> ALL Programs > Creative > Creative Audio Console.
    Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

  • How to update graphics card drivers for late 2008 macbook pro with Nvidia 9600m GT?

    Can anybody help me update the drivers for my 9600m GT graphics card for my Late 2008 Macbook pro? I am running OS X Lion 10.7.5 with a Windows 7 partition. I have tried finding support on Nvidia's website, but at least for the 9600m GT, it isn't supported for my operating system. Would I have to update it from my Windows side? And if so, would the update apply to my OS X side as well? I have a little computer knowledge, but nothing indepth.

    Welcome to Apple Support Communities
    In OS X, Apple provides the GPU drivers and you cannot update them from NVIDIA. They are updated with each OS X update, so you are running the most recent drivers for your OS X version. OS X Mountain Lion and Mavericks have got more recent GPU drivers, but it's not worth upgrading unless you need newer drivers for an app (I highly doubt this).
    However, you can update the GPU drivers in Windows, and you should do it to get the best performance. You can download them from the NVIDIA site > http://www.nvidia.com/Download/index.aspx?lang=en-us Note that drivers are only applied in the operating system you are installing them, so they will not be installed in OS X

  • ThinkVanta​ge System update not happy!

    Hi I was wondering if anyone else is experiencing this issue with an X220 (or any other Lenovo product)
    "An error was detected with the package catalogue for your system on the System Update Server. Please contact the Support Centre."
    I did contact Support and they said they had heard of some issues with ThinkVantage. They didn't take my details, or record the problem though. So hmmm...
    This ThinkVantage update came out in MAY. I would also have thought this community board would be flying if it was an across-the-board problem, certainly if it was 3 months old. So reckon the problem is likely to be at my end.
    Any suggestions VERY welcome. I just did about 60 updates manually (I thought the ThinkVantage update I put in 11 months ago was working, it wasn't) Ugly.

    Hello,
    I am not sure exactly what the problem might be, but one possibility might be that the ThinkVantage System Update software is having trouble detecting some of the computer's hardware.  One way we can check that is to see how Microsoft Windows identifies the computer via Windows Management Instrumentation.  Here's how to do that:
    Open an elevated Command Prompt (filename: CMD.EXE).
    At the command prompt, type:  "wmic baseboard get product" press Enter,  and note the results—it should be the same as the model type for your ThinkPad.
    Next, type "wmic csproduct get name,vendor" press Enter, and note the results.  Again, it should show the model type and the manufacturer.
    If the information returned is correct, there might be a problem elsewhere, such as in the system's registry, but this is a quick way of verifying that at least Windows is detecting the hardware correctly.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • HP ENVY 15-j001sr: I found not all drivers for windows 10

    I performed a clean installation of Windows 10.
    Drivers downloaded here:
    http://support.hp.com/ru-ru/drivers/selfservice/HP-ENVY-15-Notebook-PC-series/5354982/model/5403526#Z7_3054ICK0KGTE30AQO5O3KA30R1HP Support Assistant did not find the lack of drivers: touchpad, HP 3D Drive Guard, fingerprint reader, bluetooth...there are only old drivers for windowse 8.1

    Hello , Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I came across your post about the Sleep Mode issue, and wanted to assist you! First, try shutting off the Fast Startup option.  Please review the following resource to help you, if needed: Fast Startup - Turn On or Off in Windows 10 Also, try downloading and running the Windows Update Troubleshooter.  You can find it here:Open the Windows Update troubleshooter If you are still having trouble, then you can try using the Go back to an earlier build option, in your System Settings: HP Notebook PCs - Upgrading to Windows 10
    Once you are back to your original Operating System, check to see if you are experiencing the same issue. If not, then you may consider holding off on the Windows 10 upgrade for a few weeks, until drivers can be updated. Please let me know if this information was helpful by clicking the thumbs up below.
    Regards!

  • System Update not recognising BIOS update

    I have a ThinkCentre M92p 2992D9G and want to make sure everything is up to date before installing the Windows 10 upgrade. The Lenovo System Update (5.07.003) does not appear to be picking up the latest Bios for my system - the website is showing Bios 9SKT89A released 30 July which is clearly newer than 9SKT88AUS that is on mine, and the latest update check was on 31 July. I am also slightly concerned that there is no Bios for Windows 10 available. Whilst Microsoft have clearly decided that Windows 10 will run on my PC, I want to make sure that it will be fully functioning.

    just offering assistance;
    always put the link on a separate line.
    @ kevin, the link is:
    https://download.lenovo.com/catalog//10AA_Win7.xml
    Yes aps is missing.
    ==
    @wh4t3v3r
    You are missing several items. Power manager is in the catalog, but not power manager driver.
    https://download.lenovo.com/catalog//20C6_Win8.xml
    https://download.lenovo.com/catalog//20C6_Win7.xml
    Be more specific as to what operating system and MODEL type you are missing items from and state said items. 
    ==
    SU and UR search the Lenovo server based on machine MODEL and operating system.
    It seems two or more catalog entries need updating.

Maybe you are looking for