System update does not work for x200s

Hi All,
The problem is that ThinkVantage System Update can not find any packages.
("no package applicable to your system were found")
ThinkPad X200s 7466-3UG
Windows7 Professional
I have installed the version 4.01.0015 from 15 Aug 2011 (systemupdate401-2011-07-25.exe)
Could you please suggest anything?

Ok than, the problem is not in registry.
Please take a look at this thread, might be of help.
http://forums.lenovo.com/t5/ThinkVantage-Technologies/System-Update-not-getting-updates/td-p/655779
Too, try uninstalling System Update (completely remove it) install Windows 7 sp1 (if not done already) and reinstall System Update again. Do not restart immediately, wait a few moments and than restart. See what's happens.
abvasili
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Similar Messages

System update does not work with Win7 SP1 RC Wave 1

Just a heads up. System Update on win7 64-bt SP1 RC Wave 1 fails to query available updates.
My guess it is because the operating version number is incremented from 7600 to 7601.
If Lenovo would like me to work with them on testing this combination, please contact me.

Hello,
You may need to wait until Windows 7 Service Pack 1 is released (or shortly thereafter) for Lenovo's ThinkVantage System Update to work with the operating system at its new patch level.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

HT5717 the update does not work for me

still at build 1.6.0_51-b11-456-11M4508, despite a "successful" installation of update. Have seen that others are having the same problem. Any ideas?
thanks

FireFox is my browser...I get my Email...I try to read it...it opens for a second and then it goes..(.Blue line ) Opps...we can not find this...
I went to Help...
" Firefox cannot load certian websites"....I followed this.... Hints on ways to fix this...no go...Sorry

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

Link does not work for
End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
How do we get Cisco to fix?
see attachment

Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

7.1.2 update failed. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now

Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up.

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
Mylenium

Automatic update does not work

On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

It will update eventually; there may have been availability problems on the update servers.

Systems preferences does not work

My Systems Preferences does not work, either reminders and messages... since Mavericks(10.9) Programs do not respond and Macbook air is not responding.... Help.....

Well, you are certainly correct that the fact that the "wired" machines work sure doesn't rule out a faulty router....But that's why (as part of a process of elimination troubleshooting scheme) I hooked up my old Linksys Router, and got the same results. Now...What are the odds of 2 separate routers acting the same way? Especially when both worked fine on my TIPB and even on my MBP until a few months ago. Plus, my 12 year old son can pull a wireless signal from the router on his console games (xbox360, Wii, PS3) with no problem
Believe me, my first thought was to go out and buy another router, but when I swapped routers and got the same problem, I began to look elsewhere, eventually coming here for help and knowledge.
I did the SMC reset to no avail. I'm not sure about the stuff in System Configuration....By "pull" do you mean to delete all the files in this folder? Move them to a temporary folder? Should I just deal with the folders that have "IP" in the "bundle" file name?
Any help would be greatly appreciated!
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.8) 23" Cinema Display and 8 gig on G5 Dual
G5 Dual / G4 TiPB / MBP 2.0 / 2.0 Mac OS X (10.4.7) 23" Cinema Display and 8 gig on G5 Dual

TableView : sort = "SERVER" ...does not work for "TIME"

Hi,
TableView sort = "Server" works automatically for "Date" Fields and "Text" Fields.
But it does not work for "Time" field with data element "CDUZEIT". It shows the below error message:
Note
The following error text was processed in the system IFD : Invalid sort field type in "SORT ... AS TEXT".
The error occurred on the application server ifdmain_IFD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
Form: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: ONLAYOUT of program CLO27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: %_ONLAYOUT of program CL_O27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: DO_REQUEST of program CL_BSP_PAGE===================CP
Form: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Form: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Form: DO_REQUEST of program ZCL_ZPR_C_ACTION_LOG==========CP
Form: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Thanks and Regards,
Bindiya

Welcome to SDN.
This problem and solution to it is exaplined in the following oss note number.
<a href="https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=893210&_NLANG=E">893210</a>
Regards
Raja

HT1338 my software update does not work using OS X 10.6.8: update icon just stays static and times out, although web is online

My software update does not work: the icon jams and then times out, although web is online. How to resolve??

Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

System update does not work for x200s

Similar Messages

Maybe you are looking for