System update does not work with Win7 SP1 RC Wave 1

Just a heads up.  System Update on win7 64-bt SP1 RC Wave 1 fails to query available updates.
My guess it is because the operating version number is incremented from 7600 to 7601.
If Lenovo would like me to work with them on testing this combination, please contact me.

Hello,
You may need to wait until Windows 7 Service Pack 1 is released (or shortly thereafter) for Lenovo's ThinkVantage System Update to work with the operating system at its new patch level.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
  Deutsche Community   Comunidad en Español Русскоязычное Сообщество

Similar Messages

  • System update does not work for x200s

    Hi All,
    The problem is that ThinkVantage System Update can not find any packages.
    ("no package applicable to your system were found")
    ThinkPad X200s 7466-3UG
    Windows7 Professional
    I have installed the version 4.01.0015 from 15 Aug 2011 (systemupdate401-2011-07-25.exe)
    Could you please suggest anything?

    Ok than, the problem is not in registry.
    Please take a look at this thread, might be of help.
    http://forums.lenovo.com/t5/ThinkVantage-Technologies/System-Update-not-getting-updates/td-p/655779
    Too, try uninstalling System Update (completely remove it) install Windows 7 sp1 (if not done already) and reinstall System Update again. Do not restart immediately, wait a few moments and than restart. See what's happens.
    abvasili
    I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
    Who helped you today? Do not forget to thank him.
    My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

  • Verizon Galaxy S5 Lollipop Update Does not work with Ford My Ford Touch

    Updated my Verizon Galaxy S5 to Android Lollipop this week. We have a Ford Edge with My Ford Touch. All Blue Tooth features for Galaxy S5 paired and worked with Ford MFT except for text under Android Kit Kat 4.4. Since Update, I cannot: 1. use voice commands to dial via blue tooth and telephone directory from car; 2. Verizon Telephone Contact entries do NOT show in Contact List; 3. Contact List in phone is different alpha sort order from telephone directory that one can see with pairing of phone and car via Bluetooth. I have unpaired and paired phone/car multiple times. All suggestions welcome. How does one go back to Android 4.4 Kit Kat that seemed to work fine!

        DrJerry,
    Help has arrived! We'd love to help lead you in the right direction. For more information on the specific changes of the software on your device please contact Samsung directly at 888-987-4357.
    EfrainM_VZW
    Follow us in Twitter @VZWSupport

  • The streamer (automatic updating) does not work with the last version

    the automatic updating of screens (streamers) do not work anymore with the new version. I use Windows sp3.

    the automatic updating of screens (streamers) do not work anymore with the new version. I use Windows sp3.

  • Last update does not work with Ford Sync with Applink

    Spotify has been working all right with the Ford Sync with applink in my car (C-MAX, late 2014). However, with the last update of the Spotify app from Play Store, just a few days ago, it has stopped working, because it is not detected by the car. Even when manually searching for applink enabled applications, it can't be found. It' really a pity, because it had worked perfectly until now, and it is a really impressive feature which I would definitely like to use again.
    My phone is a Samsung Galaxy S3 mini, with Android 4.3 and the latest version of the Spotify app (2.2.0.636). I am a premium user from Spain.
     

    Our current situation is that my wife's phone connects via the AppLink to Spotify and shows track listings but doesn't allow shuffling or playlists to be displayed, she controls it via the phone if she wants to change playlists. My phone has connected once since I first posted to Spotify which came up with "Spotify powered by Ford" on my phone screen and allowed me to do absolutely everything you desired via the Spotify AppLink and "froze" all interactions directly with the phone, absolutely everything!!! Now it is back to not even detecting Spotify so have to connect via BT Audio. It has been like this for several months now however the most recent update (last week?) means that I now get track info up on the display! Twice however the display showed the first track only and once that finished and the next began, the display still showed the original track. Ironically at the same time, our 2010 Focus also began showing the correct track info on the display, this is the first time in the whole 5 years we've owned the car that my phone has displayed track info on the Focus, my wife's phone has always done it! I have found out that although we both have Samsung S3s that we got via carphone warehouse on the same day, hers is always one software update behind mine so never has the most recent OS. Strangely though, when I last updated my OS she also had notification to upgrade, she did, and she still is one behind me! I think there is something far more sinister in all of this but at least I get my tunes in the car, if not in the most desired way.
    My overall opinion is that it is a great system if you have the right OS/phone it works great (I know someone with a 2015 model having the same issue with their i-Phone) however the continuing upgrading of OS and App means that the system isn't always compatible and never will be until they allow auto-upgrading via the Bluetooth connection and therefore phone internet connection in the UK. Apparently the US models all allow you to download the most recent software for the radio onto a USB stick and just plug it in to upgrade. Annoying.

  • Itunes 10.4 update does not work with devices - no itunes store - a bug???

    Hi there,
    I have recently downloaded the new iTunes 10.4 and it now won't open the iTunes store or bring up any devices that I plug into the computer. This means I can not sync my iPad, my iPhone and chage any of my settings. Also, when I go to the iTunes search and type in a song that i want to play, it doesn't work, it doesn't search at all... nothing happenes.
    When I plug my iPhone in to the computer the iPhoto comes up to sync so the lead and the computer under that mechanism is working. It just wont show up in my iTunes.
    Every time I quit iTunes a message comes up with errors and asks me to reopen iTunes. The problem still persists.
    Please advise.

    I am having similar problems after clicking yes when Software Update advised I needed OSX & iTunes update. I'm running Snow Leopard, and now I cannot open iTunes, run  iTunes on my computer, siync my iPod, anything. I wish I had NEVER clicked yes...

  • Update does not work with Mac x; can i go back to vers 3?

    can i uninsstall update and go back to older version of firefox?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • Windows update does not work after using System recovery disk

    I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
    Solved!
    Go to Solution.

    I get errors saying A problem is preventing the troubleshooter from starting.
    That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
       Trouble with reinstall of Win7 64 on a L505-ES5018
    The fix was to install a new hard disk driver.
       Intel Rapid Storage Technology
    -Jerry

  • My 4th gen iPod Touch does not work with Ford sync since updating OS

    When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

    Have lots of issues with Fords MySync and here's some info that might help....
    Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
    If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
    If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
    If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
    If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
    Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
    http://www.ford.com/syncmyride/
    or call 1-800-392-3673 Opt 3
    A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
    Good Luck

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

    I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

    Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
    But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
    While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

  • The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

  • HT3258 help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

    help!....i have macbook with lion 10.5.8 op because protools does not work with snow leopard, now i bought "traktor" which does not work with old op sys, can´t find a suitable update anywhere, what to do ? pete

    According to Roaring Apps, there is a version of Protools compatible with Lion.  But you may need Snow Leopard 10.6.8 to buy either Lion or ML on MAS.   It looks like you need to get up-to-date with your OS and the apps too.
    http://roaringapps.com/apps:table/tags/_t/index_tags/_t/p/2
    http://roaringapps.com/apps:table/tags/_p/index_tags/_p/p/3

Maybe you are looking for