System Update: Update of Intel Wireless LAN (11abgn, abg, bg) looping

Hi there,
System Updates (V. 3.14.0019) gives me a Update on Install of Intel Wireless LAN (11abgn, abg, bg) (11.5.0.36.). System Update says the Installation was successfu and wants to reboot. Doing so and running System Update again gives me the same update again
I tried to manually remove the driver and manually install it again. Same result.
I tried to reinstall System Update. Same result.
Anyone ideas?
Greetings

SAME HERE! T61p. VERY ANNOYING and VERY UNPROFESSIONAL.

Similar Messages

Problem arised after updated the intel wireless lan

Hello, everyong
My laptop is T510. I just updated the intel wireless lan to the version of 15.02.0000.1258. After the updates, my wireless router was down when the laptop started. Initially it can connect to the router for a few seconds, then the router was down with all the lights going off except the power light. Once I restart the router, everything goes fine, my laptop is able to connect to the router without any problems. So I have to restart the router everytime when I start my laptop. Please help me. How to fix this problem?

Why do you have to restart the router.
Have you checked the computer WiFi profile? Why or what is not allowing the connection.
You could delete the computer profile in Access or whatever you're using and discover, reconnect to it again as if its the first time. It may resolve the issue which is unknown.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Update ralink 802.11n wireless lan card

Receiving a pop up saying that there is an update to ralink 802.11n wireless lan card. Is this crucial?Bad past experience with updating things that weren't crucial. Thanks!

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer displays a pop-up message prompting you to update the wireless card installed. I would be happy to assist you in this matter! If you are not experiencing any difficulties connecting to a wireless network on your computer, I would not count the update as crucial. If your computer is having trouble connecting to the network, even if the problem is intermittent, it may be a good idea to install the update. I hope this helps, and if you have any other questions or concerns feel free to post back! Cheers

Will 2800-400 BIOS update enable 802.11g wireless LAN?

I recently bought a Belkin 54G cardbus wireless adapter for use with my Satellite 2800-400, which has a Windows ME OS.
The setup software wouldn't install a driver, even though ME was said to be supported.
I wrote to Belkin and they told me that it was because the laptop BIOS didn't support 802.11g wireless and that I should update the BIOS. I updated to BIOS version 2 but it didn't make any difference.
I don't know if Belkin's instructions were on the right track or whether they were they just pushing the responsibility as far away from themselves as they could.
Please can anyone tell me if my laptop does support 802.11g wireless, with or without the BIOS upgrade?
TIA
Mike

> Hi
>
> Im not 100% sure if your notebook supports a
> wireless LAN connection because I dont found any
> informations about it.
Thanks for the reply. the notebook does support wireless LAN because I can get a 802.11b card to function OK.
> But as far as I know its not
> necessary to update the BIOS therewith the Wireless
> card works.
Well it's done now so there may be other benefits. Not 802.11g wireless though it seems.
> I recommend to contact the service partner. They have
> more detailed informations about this unit.
Thanks I'll try to find and contact a service partner.
Mike

Update Retriever - Missing Intel wireless driver for the W530

I can't find the driver g1w218ww_s64.exe available for download. I can see the 32 bit version, but not the 64 bit one. I even searched database.xml file to see if I'd accidentally hidden it, but can't see it there either.

I have verified the package is now in the catalog. Can you run a search again with Update Retriever and see if it is listed?

Wifi very slow on Helix after fresh install of 8.1, do I need the Intel Wireless LAN "drivers"?

I'm getting a few hundred kbps on downloads from MSFT's dev site, which typically are 1MB/sec for me on this Helix. Just did a fresh install, but am using stock Windows 8.1 wifi drivers. Do I need to install something specifically for Helix, like the Intel files?

If there is a dedicated driver from the manufacturer for your hardware for your current OS, you should always choose that over the stock Windows drivers.
Best thing for your Helix would be to run the Lenovo System Update to get your machine up to specs in the driver department.
I always stick to the Lenovo issued drivers for my ThinkPads and stay far, far away from any Windows Update drivers. They are absolutely a no-no for me.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Intel Wireless Display Unable to load DLL error

Hi there!
I have the same problem. Today I've update my software by Lenovo updater and installed wireless display software, after I've rebooted my laptop and try to open the app I have this:
If it important my switched on radio divice as those:
What should I do to make WiDi to work?
P.S.: I have an original, not tablet version of x220
Thanks.
X220, IPS, Intel Core i7-2620m, 8 gb, Samsung 840 pro 256 gb, eGPU + Zotac AMP GeForce GTX 670.
Solved!
Go to Solution.

Hi EvgenyP!
The Intel My WiFi dll file is missing. To install it, download the Intel Wireless LAN drivers for the X220, and make sure that the My WiFi component is installed:
Lenovo Support - Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32-bit, 64-bit), Windows Vista (3...
Hope this helps, and come back and tell us how it goes!
I don't work for Lenovo. I'm a crazy volunteer!

Wireless LAN driver can't load after BIOS update NB550D

Hi
I have a new NB550D and have jst installed the recommended BIOS update. Now the Wireless LAN driver can't load (error code 31).
I tried installing the lestest driver off the Toshiba website but it still can't be loaded by Windows...
Everything was fine before this! Any ideas?

> In the Device Manager the Atheros Wireless is shown
This means that the Wlan driver was installed properly and the issue could be related to configuration between Wlan card and Wlan router.
You should check if the notebook can connect to Wlan router without the usage of any encryption settings.
Disable the WEP/WPA encryption and test the connectivity. Of course this should be done only for test attempts.
Are you sure that the Wlan is enabled? Enable this using FN + F8

Wireless LAN Driver for Equium A210-1AS

Hi
The Toshiba TEMPO system alerted me to a Wireless LAN Vista driver update for my Equium A210-1AS. I've downloaded it, but it's an Atheros driver, whereas the wireless connection properties show the wireless device to be a Realtek RTL8187B device, driver RTL8187B.sys.
It's not exactly obvious why an Atheros driver would be relevant.
Any suggestions?

Reverse the Atheros WLan driver installation and use the preinstalled one.
I agree with Mores. Dont update anything if your notebook runs great.
By the way; some A210 notebook were equipped with the Atheros WLan card and therefore you have received such update.
I think you should take a look firstly on your notebook before doing any updates

Progress at 74% stuck installing Intel Wireless WiFi Link System Update

Using System Update, I am Installing package Intel Wireless WiFi Link for Windows XP.
However it hangs/stuck at Overall Progress: 74%
This is not my first attempt over many days.
After waiting 10 minutes or so, I press cancel...
Are you sure you want to cancel the installation of updates? <Yes> (of course).
System Update window does not change, and remains displaying the Installation package progress...
Pressing [X] or ALT+F4 or Taskbar> Close does not end. Killing msiexec..exe does terminate the process(es).
(Terminating installation packages can be detrimental to PC and my health though).
It's been a while now, but appears still I best use http://www-307.ibm.com/pc/support/site.wss/MIGR-70443.html instead of System Update. Too bad.
Someone else getting the same situation?
Rick
W500 4058-CTO WinXP

gal9000, welcome to the forum,
have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP

I just reinstalled a T60 from scratch TWICE to the point of updating - Intel Wireless Wifi Link for Windows XP -
Just after that very latest Update (3.1.1.1 or so?) there is no WLAN possible and I had to find out, that a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
I have a full backup done by acronis 2010 so that does not bother me so very much.
The point is that I like to WARN everybody to install that Update to their T60 e.g. 2008YWJ !!!
(contains 3945AGB WLAN Module!)
After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature
szAppName: AcSvc.exe szAppVer: 5.6.1.33 szModName: PfMgrApi.dll
szModVer : 13.0.0.2 offset: 000d4912
and the System wants to report that stuff to MicroSoft...again and again...every time u
start AccessConnections.
U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
and REinstall it....just 2 get the same messages and NO WLAN anymore.
I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
automagically...;-(((
And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
(I could not use that Thinkvantage-System Recovery because it did not even get all its updates by the
time the system went in limbo during install! What i defintely can say is that it breaks at exactely
same point when Intel Wifi Updates is installed...
I do my Acronis Restore now and try 2 avoid this Update....;-(
if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and NEVER
experienced problems like this in many years!
cheers
GAL9000

gal9000, welcome to the forum,
have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

T420 (4236) - Lenovo Update Retreiver is missing the Intel Wireless Driver Package

Hi,
I'm using Lenovo Update Retreiver with ThinInstaller. We got our new model T420 and got everything except the driver for Intel Wireless Driver.
The new version Power Manager 3.62 is also fail. Missing information and won't install.
Could you please add it!

After seeing the above comment, I again tried to update Power Manager on my 3 ThinkPads, without success.
On my R500 running Windows 7 professional with SP1, Update Retriever (version 4.02.0011) still fails to download the package for Power Manager version 3.62. Of interest here is that when you try to list the details for this package, you still get a blank screen. If you try to bypass Update retriever, and go with System Update (version 4.01.0015) directly, the update still fails with message "1 package did not download".
On an R500, running Windows XP SP3, Power Manager (version 1.99j) still fails with similar messages. Update Retriever (version 4.02.0011) still reports "1 update failed to be downloaded" and System Update (version 3.15.0017) still reports "1 package did not download".
On an R61, running Windows XP SP3, Power Manager (version 1.99j) still fails with similar messages. Update Retriever (version 4.02.0011) still reports "1 update failed to be downloaded" and System Update (version 3.15.0017) still reports "1 package did not download".
I know that I can update these packages manually, but the point is that System Update and Update Retriever still cannot process this update. I use the update logs within System Update to keep track of what has been installed. Doing the update manually defeats that purpose.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

Wireless ThinkPad 11abgn for Windows XP, 2000 ver.7.4.2.105 - new event log entries since update

On 10/17/08, I updated my wireless ThinkPad 11abgn driver from version 6.0.3.94 to 7.4.2.105. The update was a nice improvement as I now connect faster than with the older driver. However, although no impact to my T60 performance, ever since the new driver was installed, the following has occurred:
1. A new entry in the Event Viewer called ACS
2. Multiple "ccxroaming" entries are generated every time my laptop comes out of standby (anywhere from 4 to 7 entries each time!)
3. Since 10/17/08, I have generated 951 ACS events!!
For example, this morning, after coming out of standby (AC mode), the following entries were generated from oldest to newest:
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:28:57 (my computer name) Wireless Adapter removed...
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:28:57 (my computer name) New Wireless Adapter detected..
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:29:02 (my computer name) System resumed from suspend state..
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:29:02 (my computer name) New Wireless Adapter detected..
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:29:03 (my computer name) System resumed from suspend state..
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:29:06 (my computer name) Wireless Adapter associated successfully..
I can understand Lenovo possibly wanting to generate this information when testing a new driver in-house, but does this really need to be passed on the end user?
T60, 8744-5BU: 2.0 GHz T7200, 4 GB RAM, 15.4" WSXGA+, 1680x1050 ATI Mobility Radeon X1400, Win 7 Ultimate w/SP1 - 64-bit

I downgraded upower, and it didn't fix the problem, so I re-upgraded it and built/installed xfce4-power-manager-git. It's now reporting the correct battery level but the systray icon is missing (replaced by the 'blank screen' icon).
EDIT: in fact, no, it's still not reporting correctly.
Last edited by markhadman (2014-04-19 12:35:08)

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

Wireless LAN update for Tecra M5

Hi,
I've downloaded the latest wireless lan driver from Tosh, version 12.4.0.21.1 and expanded the zip for my Tecra M5, PTM51E.
When I double-click on setup.exe, I get an hourglass for a second and nothing more. Does anybody have any idea what may be inhibiting the program from running?
Cheers.
Rag

Hi
Im not quite sure why the exe file didnt start the WLan driver installation but why you dont update the Wlan driver in device manager?
Go to device manager, choose Update driver, then use the Advanced installation, point to the driver files stored on the HDD and finish the installation.
This should work!

System Update: Update of Intel Wireless LAN (11abgn, abg, bg) looping

Similar Messages

Maybe you are looking for