System Users - SAPJSF and JCO ESS 6.0 Portal

Hi All,
in regards to ESS 6.0 Portal . Would someone be able to explain
the different functions of the users: ESS user account ( employee) , SAPJSF communication user, and the JCO user ( for metadata ?)
Wondering how the SAPJSF user account is actioned when an ESS
employee account is being used. Thank You !

SAPJSF
http://help.sap.com/saphelp_nw70/helpdata/EN/44/04265816343fdbe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/4e/225b42eeb66255e10000000a155106/frameset.htm
jCO User
The "metadata" JCO is the way the webdynpro connects to the backend (ECC for example) at a systems level (ie. the program itself talks to SAP as a system user in order to communicate with BAPIs/RFCs/etc to pull metadata information. The "user" defined for that connection will be a "system user" type userid (like your "RFC user" kinda thing). The other JCO connection is the "stream" used for the actual end user to communicate with the WebDynpro and the backend system. That connection will have the authoriations for that user checked. Make sense?
So in other words....one connection is for the program to talk to the backend...the other is for the end user to talk to the backend THROUGH the program.
reward points if helpful

Similar Messages

WEBDAV FILE SYSTEM, user name and password changed

Getting prompt as follows, WebDAV File System Authentication,
Enter your user name and password to access the server at the URL "http://idisk.mac.com/bobbiealiaswink/" in the realm "idisk.mac.com."
User name and password were changed recently by Mobile Me, now either or neither
are being recognized by prompt. Constant reminders every few minutes since upgrading Safari two day ago....I am going buggy with prompts...have tried every possible configuration. Is there a way to enter new access area to enter new username and password?

Hi Alias Bobbie, and a warm welcome to the forums!
If this doesn;t help...
http://discussions.apple.com/thread.jspa?threadID=2082353&tstart=0
Try this...
http://support.apple.com/kb/ts1544

What do system user SAPSYS and DDIC?

Hello,
In SM51 I can see the users SAPSYS and DDIC. Both execute continuously different reports.
Thus, also not user is logged on the system, system activity is noticed, caused by SAPSYS and DDIC.
Using ST03 you can see, which reports both processes execute regularily. But I do not have a clue, what these reports are good for. What is the purpose of SAPSYS and DDIC?
Can anybody give a detailed description?
thx, holger

SAPSYS & DDIC are pre-defined R/3 system users. User DDIC is a user with special privileges in installation, software logistics, and the ABAP Dictionary. The user master record for the above id's is created in clients 000 and 001 when you first install your R/3 System.

Report on portal User ID and Assign Roles for all portal users

Hi!
I would like to know , is there way that we can get a report which shows all the portal user ids with there assign portal roles. If we can't get this from portal. Can we get it from Oracle database ?
What are the oracle tables and fields which store this information?
If nay one have a custom develop iview for this please let me know
Thanks
Ramesh

Hi Ramesh,
as Pascal stated (and as I did above), if developing within the portal is not really new for you, playing around with the UME API is really more or less trivial.
Check Portal User and Role info as well as User to Role listing for similar requests and code hints / further links.
Hope it helps
Detlev

Can't Start WLi server, Need info on System User Rights

Hi:
System
WIN 2K Professional
Laptop Dell Latitude
No matter what system/Administrator user I try to use I can't start the WLserver
for WLi. Error message is at end of posting
What am I missing? or what rights should be assigned system user for WL to start?
A system user name and password. WebLogic Server user names and passwords can
contain any character from the JDK supported character sets, including international
characters.
Thank You
David L. Wasler
[email protected]
ERROR MEssage
<Feb 10, 2003 1:37:51 PM CST> <Notice> <Management> <140005> <Loading configuration
D:\bea\user_projects\wlidomain\confi
g.xml>
<Feb 10, 2003 1:38:15 PM CST> <Notice> <Security> <090093> <No configuration data
was found on server myserver_wli for r
ealm CompatibilityRealm.>
<Feb 10, 2003 1:38:16 PM CST> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Feb 10, 2003 1:38:16 PM CST> <Critical> <WebLogicServer> <000364> <Server failed
during initialization. Exception:java.
lang.SecurityException: Authentication for user administrator denied
java.lang.SecurityException: Authentication for user administrator denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(SecurityServiceManager.java:1078)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1216)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)

Igore this message please. my machine was not having IPC resources that
is why this problem was comming. I removed some of the IPC keys and it
started to work.
thanks,
Abhishek.
Abhishek Srivastava wrote:
Hello All,
I was successfully using tuxedo on my Red hat linux machine.
Now I changed my linux to Mandrake. Now I cannot start tuxedo
anymore. my ULOG is showing the following error
110622.nt10172!BBL.3682.1024.0: LIBTUX_CAT:756: ERROR: Cannot get status
for server files /apps/Tuxedo/bin/BBL and /apps/tuxedo/bin/BBL
110622.nt10172!BBL.3682.1024.0: LIBTUX_CAT:248: ERROR: System init
function failed, Uunixerr = : stat: No such file or directory
110622.nt10172!tmboot.3681.1024.-2: 06-21-2002: Tuxedo Version 7.1
110622.nt10172!tmboot.3681.1024.-2: CMDTUX_CAT:825: ERROR: Process BBL
at hello failed with /T tperrno (TPEOS - operating system error)
110622.nt10172!tmboot.3681.1024.-2: WARN: No BBL available on site hello.
Will not attempt to boot server processes on that site.
110622.nt10172!BBL.3682.1024.0: CMDTUX_CAT:26: INFO: The BBL is exiting
system
regards,
Abhishek.

Finding system user name

hai any body tell to me how to find the system user name and password in windows domain
now i am developing the java based anti virus software ...that why we need for that ...
so anybody helsp to me
also i was used runtime().exec("");->System commands but i can get the system user name
anybody clear to this soluations ....

If you have at least one account that has admin privileges, which will be one of those *short names* I pointed to, then open System Preferences, Accounts, click on the lock, supply one of those shortnames, add the password and with the Accounts now unlocked open the other account that you guess may be the Admin's account and view the Username.
If there are several shortnames, work through each one methodically and logically. The number of possible combination are few.
The other possibility is that there is no account that has admin privileges, but you say there is and I believe you.
Postscript: if you are trying to invoke admin privileges, supplying the shortname and its correct password will suffice. There is no need to supply the full Username. Either will work.
This makes me think you may not have the correct Admin password.
Message was edited by: roam

New Appraisal system using EHP5 and NWBC

Hello Experts,
Can we implement new appraisal system using EHP5 and NWBC client without a portal?
Sorry, i am raising this question again But after finding out that the new ESS works without portal using NWBC, i was wondering if the same is applicable to appraisal systems as well?

The only changes in PMS in EHP5 pertain to the pre-defined template. If you are using (as is most likely) the flexible template in your implementation, there is no relevant enhancement in EHP5.

ESS user ids and SAP Users ids accountability

Dear All,
Here at client place we some 50 professional user licenses for SAP r/3 and 200 ESS licenses. So here can we split same licenses into 150 ESS and 50 MSS, as well as when i am creating a system user at backend would be accountable against SAP professional licenses or its included in ESS licenses.
Regards,
Rajasekar

no replys

How to 'Remove' user access from deleted dual boot system's users in existing operating system's folders and files?

I have Windows 7 Enterprise Professional, accessed earlier from (now deleted) other dual boot operating system (User folder), which shows it's users as unknowns for folder properties in Windows 7 Enterprise Professional's "C:\Users\Aniruddha",
which causes system not responding, how to 'Remove' these unknown users from folder properties of "C:\Users\Aniruddha"?
Also "C:\Users\Aniruddha\Application Data" creates many of own folders within eachselfs end folder ("C:\Users\Aniruddha\Application Data" creates a "C:\Users\Aniruddha\Application Data\Application Data", "C:\Users\Aniruddha\Application
Data\Application Data" creates a "C:\Users\Aniruddha\Application Data\Application Data\Application Data" and many) because of which system stops responding randomly, starts responding only for "ctrl+alt+del", why such self
creation begins?
Whether a standby user with same file structure copied from a user would dynamically link it's shortcut folders with Windows user from whom these folders were copied or whether there would be no link and for above said problem I would restore User's file structre
back to normal just by copying from standby user?

It seems your PC is infected with some malware. Use a trusted antivirus software with the latest definition updates installed to scan and remove the malware.
Balaji Kundalam

CIC0 - CRM system requests user name and password

Hi folks,
I am a BASIS gui am facing a peculiar problem with our production CRM system. It is a CRM 5.0 system and we have no java stack . The customer service users have reported on a daily basis when they are logged into CRM system and working with CIC0 transaction for several hours, suddenly a pop up comes up stating
"The server <CRM server server name> is requesting that a user name and password be sent in an insecure manner (basic authentication without a secure connection) "
This is happening when a user logged on the CRM system itself. There is no java stack on this system, pure ABAP system. When this popup comes up, the user then puts his/her user name and password and hits ok and is able to continue with work only to be interrupted the next day in the middle of work. So they are able to login , keep doing their for hours and suddenly are asked to revalidate their user name and password.
1. If the user is logged in for several hours and is working fine, what happens suddenly that the user name, password is forgotten and requires to be re-inputted?
2. Is this related to the browser? But the users only work on CIC0 abap system, they do not open a browser , and this is not via portal or a web-ic link...this is all pure abap login via a sapgui.
3. I have copied the same user and am testing to see if the pop up pops up on me...but so far this pop up is not comming up for me....can this be related to user's local desktop windows or browser settingis there any password cache setting ..if so does it mean every time user tries CIC0, a cached password is sent to the server ......I am confounded ...where is the issue, what settings is this related to...
Thanks for any help...
regards, Vikram

Hello Vikram,
Apparently CIC0 makes use of WAS which requires separate authentication. This can possibly explain this issue. Just check if you have maintained the local SSL certificate. Also ensure SSO is also in place. Check STRUSTSSO2 for this.
Regards.
Ruchit.

User Name and Password for JCO RFC call to BAPI

Hi all,
What I think I know:
--We do NOT have Single Sign On configured so don't tell me to use SSO please - I agree, but...
--We have a requirement to do a goods receipt which prints labels for the handling units
.....The printer to which the labels are directed depends on the user who is running the transaction
What I think this means
--We will need to specify a user name and password in the RFC call so the label will go to the correct printer
--I cannot use the IllumnLoginPassword (or whatever its name is) for the password
--I need to prompt the user for their password a second time after they login to our MII app
The problem
--I will need to store the password somewhere for the duration of the session
......In session variable that has been encryted
.............I didn't see an encryption action block so I could create my own
......In the database using database column encryption
.............A little bit of a pain, but not too bad
Any corrections, alternatives, ideas .... ???
Thanks,
--Amy Smith
--Haworth

Thanks for the attention guys. A little clarification.
1. I have been assuming that I cannot use the IllumnLoginPassword for the JCO SAP password in the action block. If this is NOT true, then it solves my whole problem.
2. It would not work to prompt a shop floor person for their password every time they do an operation completion. Well, at least
if I don't want to not get lynched!
3. I am planning on prompting people every time they log on for their ECC password and retaining it somewhere secure while they are logged on (and longer if they skip the logoff step.)
4. I have been focusing on how/where to retain the password, but also need a way to encrypt it during transmission. Jeremy said the applet/BLS would at least encode it for me. That is good.
--Amy Smith
--Haworth
Edited by: Amy Smith on Feb 18, 2010 1:30 PM

Unsecure System User and HKCU

I'm creating a Zen Application object to deploy Microsoft Office 2007.
It will be run as a VBS script, run as the Unsecure System user so that setup.exe can run.
Unfortunately this means I don't have access to the actual user's HKCU, or even the correct username, since the SYSTEM user is in place when the app runs.
I need to drop some files in c:\docs and settings\[username]\..... and I also need to add a reg key to HKCU\Software\Microsoft\Office\....
Can anyone suggest how I might be able to achieve this from an elevated app?

Spearse,
> Can anyone suggest how I might be able to achieve this from an elevated
> app?
Chain to another AO that does the per-user stuff+
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

User Settings and System Settings

Which settings are stored at the user level and which settings are stored at the system level? I asked Apple support if it was possible to reset all Mavericks settings to default and retain my apps and data. They suggested I create a new user and transfer my personal files over. I expected this to start with all the settings at default, but I've found that the Network and Energy Saver settings remained the same. What other settings are not set to default when a new user is created?
Also, Apple failed to mention that the new user would have to take ownership of the old user's files. I'm wondering if the command below was the proper way to do so:
sudo find / -user oldusername -exec chown newusername {};

All system-level settings are stored in /Lbrary/Preferences/, including the hidden .GlobalPreferences.plist file.
Can't help with the Unix command, but seriously doubt their advice. Why would you want to create a new user? The normal way to reset user settings is to remove the plist files stored in /username/Library/Preferences/.

You must supply a valid User Name and Password to log onto the system

he installing Hyperion 9.3.1 on a server, I installed and tested successfully Shared Services, Essbase Administration Services, Essbase Server, Essbase Client ........ my problem is when installing Reporting and Analysis
Services and installed without problems UIServices in confuguratio utility comes a list of products to configure (Financial Reporting, Web Analysis Planning .... .... among others), first configure Financial Reporting and Web Analysis, when done reboot the machine, then wake up coughing the service entrance to http://localhost:45000/workspace, correspontiente and I get this message "you must supply a valid User Name and Password to log onto the system"
I need an urgent solution k and the above does not work until the time
or failing to address where we can solve this

Hi,
First of all really you should be going through the webserver plugin port if you want to access the other components through workspace.
e.g. http://localhost:19000/workspace
If you entering the correct login details and the account you are using is provisioned then you could check out what information is in the logs :- \Hyperion\logs\BIPlus\SharedServices_Security_Client.log
Cheers
John
http://john-goodwin.blogspot.com/

Reg: Simulate the system i/0 and user i/o

Hi all,
Currently am in the process of testing the database perfomance. As per , want to simulate the system i/o and user i/o upto 30ms.
Please let me know the ways. your early will be highly appreciated.
Thank you
Regards
Krishnan

Hi,
system and User i/o are not different.
But single block read ('sequential read') and multiblock read ('scattered read') are different (difference is the size of i/o)
On unix, you can use dd (blocksize is your oracle blocksize for single block reads)
Regards,
Franck.

System Users - SAPJSF and JCO ESS 6.0 Portal

Similar Messages

Maybe you are looking for