System uses non-default language after log in

I am bilingual, and use two languages on my Mac - English as default, and Russian as secondary. After the update to 10.7.4. every time I log back in (have a password on my Mac Pro), all the programs have Russian language. For example, I open a Chrome window to start typing in the web address, and it writes in Russian language. I cannot remove Russian language, as I use it as much as English language. But I would like to have English as default like I am used to. I have checked in the Preferences, everything is as it used to be, primary English, and secondary Russian. But the problem persists even after the reboot, changes in the Preferences.
It is not hard to switch between the languages, it is just annoying to expect the machine run in English, and then see the other language, and switch.
Please, advise what should I do?
P.S. Besides, the English language icon is became more dull after the update. Not that I complain, just want to know if it is normal or there IS the problem with languages on my Mac.
Thank you in advance.

In system preferences/language & text/input sources, do you have the item "use the same one in all documents" selected?
Have you tried turning off the Russian keyboard there for a while, rebooting, and then turning it on again?

Similar Messages

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

Hi Team ,
We are planning 11.2.0.1 Grid infra rolling upgrade to 11.2.0.2 with out any downtime.
But while up gradation due to default scan port 1521 , 11.2.0.1 databases are not able to connect (remote connections)
We are using 1900 port for existing 11.2.0.1 grid infra scan.
While up gradation it is taking default port of 1521 insted of existing port 1900.
Please provide the solution to use non default port while 11.2.0.2 up gradation.
After upgrade the status as below.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
Here I was getting TNS:no Listener errors from the client connections.
I have modifyed the scan port then it is working fine.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl modify scan_listener -p TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4>
Here the problem is we need to do the grid infra upgrade with out downtime,but due this default port issue clients are not able to connect to the database.
Thanks
Bala
Edited by: user12032334 on May 31, 2011 11:46 AM

Why are you using a non default port? It does not improve security. It makes network management more complex. And causes the type of issues that you are facing now.
So before changing defaults, make sure that your reasons are technically sound. And using port 1900 when 1521 is available, is not technically sound by any means.
As for addressing the problem you have created for yourself by mucking around with port numbers. Use a NAT firewall (on each RAC node) to rewrite packets headers received on port 1900 and send these to the server's port 1521 instead (on the VIP or static IP as required).
This can be fairly easily done using iptables if your o/s is Linux. You need to:
a) create a pre-routing NAT rule
b) create a post-routing NAT rule
c) create a forwarding filter rule for port 1900/tcp
d) create an input filter rule to accept traffic on 1900/tcp

Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:

Hi,
Im having a problem on my 2801 router, my fxo and fxs port are not fucntioning, when i check the dsp it shows below; i have tried different ios still the same problems encountered.
rtr01#show voice dsp detailed
edsp 0001 01 g729r8 p 0.1 IDLE 50/0/1.1
edsp 0002 01 g729r8 p 0.1 IDLE 50/0/5.1
edsp 0003 01 g729r8 p 0.1 IDLE 50/0/6.1
Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:
This is not recommended, the IOS default version is 24.3.0
----------------------------FLEX VOICE CARD 0 ------------------------------
                           *DSP VOICE CHANNELS*
CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
LEGEND     : (bad)bad    (shut)shutdown (dpend)download pending
DSP   DSP                 DSPWARE CURR BOOT                         PAK   TX/RX
TYPE NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 02 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 03 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 04 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 05 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 06 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 07 None           0.0.0 bad   idle      0 0                 0          0/0
C5510 001 08 None           0.0.0 bad   idle      0 0                 0          0/0
                           *DSP SIGNALING CHANNELS*
DSP   DSP                 DSPWARE CURR BOOT                         PAK   TX/RX
TYPE NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 {flex}         0.0.0 free idle      0 0 0/0/0           0          0/0
C5510 001 02 {flex}         0.0.0 free idle      0 0 0/0/1           0          0/0
C5510 001 03 {flex}         0.0.0 free idle      0 0 0/2/0           0          0/0
C5510 001 04 {flex}         0.0.0 free idle      0 0 0/2/1           0          0/0
------------------------END OF FLEX VOICE CARD 0 ----------------------------
#sho voice port summary
                                           IN       OUT
PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
=============== == ============ ===== ==== ======== ======== ==
0/0/0           -- fxs-ls      up    dorm on-hook idle     y
0/0/1           -- fxs-ls      up    dorm on-hook idle     y
0/2/0           -- fxo-ls      up    dorm idle     on-hook y
0/2/1           -- fxo-ls      up    dorm idle     on-hook y
50/0/1          1      efxs     up    up   on-hook idle     y
50/0/5          1      efxs     up    up   on-hook idle     y
50/0/6          1      efxs     up    dorm on-hook idle     y
PWR FAILOVER PORT        PSTN FAILOVER PORT
=================        ==================
can somenone help to advice. th

Hi,
I see that the DSPware version says 0.0.0 and the current state shows "BAD" which should not be the case. Are you running 12.4(24)T IOS because i see that the default version of DSP should be 24.3.0 as printed in the output. By default the IOS itself contains the default DSPware in it but if it does not show up in your router, try reloading the router to see whether it fixes your issue. If not check the following link which lists the steps to be followed to install a new DSPware on your router.
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080a7af82.shtml
Hope that helps
Regards
Nitesh
PS:pl rate helpful posts

DSPs using non-default firmware

Hello everyone,
I have this problem that I'm facing.
I had a branch router which was working fine then all of a sudden incoming/outgoing calls stopped working.
I noticed a new line in configuration
voice-card 0
! Warning! DSPs 1 in slot 0 are using non-default firmware from device flash:
! This is not recommended, the IOS default version is 24.3.4
The thing is I have many branch sites that are working using the same router hardware model (2811) as well as same IOS version.(c2800nm-adventerprisek9-mz.124-24.T2.bin)
I changed the IOS (new version is c2800nm-adventerprisek9-mz.124-24.T4.bin) but still the line is there and the case is not solved.
Could it be a hardware issue with the router itself or the WIC card?
Really appreciate your help
Thanks,
Ahmed

Hi Ahmed,
This warning message may not be the issue why calls stopped working through the router is you did not make any changes in the IOS or the dsp version.
The dsp firmware can be upgraded independently from the bundled firmware that is in IOS. You would usually do this if you need to get a bug fix in the dsp firmware but wanted to remain on the same IOS release. There is some risk involved in this as there could be compatibility issue between the firmware version and the IOS release hence the warning message that is displayed.
If you stay within the same general release branch of the firmware that is bundled with IOS, then you should not see any issues; for example if you had 24.3.2 installed when the default was 24.3.4. Having said that, 24.3.4 is the latest version in that release branch so I would guess that you are running an earlier release which was installed from some previous incident.
Check your flash and you should see the dsp firmware there. A "show voice dsp" will show the version that is currently running on the router. You can remove it or rename it to something else so that it will not be loaded, but you should try to find out why it was there is the first place.
Check the link below for more detailed information on maintaining the dsp firmware on IOS routers.
Without knowing more details on the problem you are experiencing, I cannot gude you further on what else to look at. We have documents that cover voip troubleshooting but you may need to open a tac case.
Thanks, Bryan
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080a7af82.shtml

Hello! I use photoshop CS3. recently, after logging information into FILE INFO, I am unable to close out that window. I am able to save & close the image I am working on, but the window remains. I then must close out of Photoshop completely and reopen to

Hello! I use Photoshop CS3 and Yosemite. Recently, after logging info information into the FILE INFO panel, I am unable to close out the window. I am able to save & close out the image, but then I have to completely close Photoshop and re-open the program to work on a new image. Frustrating! Any help to remedy this problem? Many thanks!

Try resetting the Photoshop preference file: Press and hold Cmd+Opt+Shift and start Photoshop. Select "yes" when asked if you would like to continue with reset.
Benjamin

How to use non-default Alias Table in Analyzer report

Hi,I defined many alias tables in Essbase. I would like to use a different alias table other than the "default" in Analyzer 6.5 report. In the on-line help, it said I can modify in "database connection properties" when first defining a new report to use a specific alias table. It tells me to do the following: Click the "New" toolbar button. Select a Display Type or Layout, and click OK. Right-click a database connection name in the "Select Database Connections" dialog box, and select Modify from the right-click menu.So I did this, but as I did the last-right click, there is no "Modify" option available. Only has "Add New..", "Database Connection Properties.." However, if I defined a new personal database connection using the login user, I can select to use other alias table. But this will go to personal database connection properties.Is it possible to specifically tell Analyzer to use other alias the global level in database connection? What I use to do is to have certain reports to use the default alias, and another to use another alias table. These reports should be able to share across all users.Sam

In deed it is fix in the GA.Another way to set the alias table is to do it in the Admin client. If you add a connexion to a user there is a new 6.5 button "set alias" that allow you to set the default alias table for this specific user. But, it does not exit on a user group level.

My google changed default language after updating safari

I recently updated the safari software on my macbook. As I live in New Zealand I use google.co.nz however after updating safari, the default country has changed to the Netherlands (I'm guessing as it's hard to tell as everything is written in another language). Any time that I go on a google related page or service such as blogger, or using the google toolbar in safari it automatically uses the Netherlands version now, which is really annoying as I have no idea what it is saying, and I really need to go back to using english. Is there any way that I can change this? I tried looking up help on the google help page but it doesn't display those pages in english either which isn't very helpful.

Thanks Neville for that quick response.
I setup my Mac in English and I only have the languages English and German selected in System Preferences - Language & Text - Language (I am on OS X Mountain Lion).
Within Safari 6.0 the reset dialog sligthly changed and mine looks now like:
Safari's help states that:
Remove all website data:
Removes cookies, tracking information, and other data that websites stored on your computer.
So that's why I did not select 'Remove all website data' (although I would love to).
But nevertheless all that did not help and my Google search within Safari still defaults to 'French' :-(

JNI (Java from C) -- multiple JREs installed, need to use non-default one

Hello,
I don't know how many Google/forum searches I must have tried -- I can't seem to find a solution to my problem.
I am calling Java from C. We have two types of environments:
(1) 1.3/1.4 mix, and
(2) 1.4 only.
The mixed environments are configured to use 1.3 by default. This configuration will not be changed. The original developer's code needs backported to the mixed environment, but it has been discovered that his Java code is not 1.3-compatible.
Since the code is not compatible with 1.3, I need a way to bypass the default JRE setting and get JNI to start a 1.4 JVM. Is there a way to do this?
Thank you for your help.

My "solution" is a kludge. It attempts to compensate
for what I thus far believe to be an apparent lack of
functionality. I believe the functionality I
described should exist in JNI so that little jewels
like my "solution" are not needed. What I am doing
is improper. Therefore, I respectfully disagree with
you.Except that your OP suggested that if you could replace it with 1.4 then that would be suitable solution.
So if that is a suitable solution and you can in fact modify the JNI code then that is a solution that meets all of your needs.
Regardless however you will note that the "The Java Native Interface" book in chapter 7 provides a specific section which
1. Specifically points out why you can't depend on a generic VM loading mechanism
2. Provides a specific mechanism which is OS/Platform specific, for doing runtime loading of the VM presuming certain constraints are followed.

CANNOT USE COMPUTER AT ALL AFTER LOG IN. Only happening now.

Well, I turn on my computer tonight, and guess what? After I log in, it takes me to a set up assistant, as if I only installed Leopard now. I complete this set up assistant, and go back to the login screen. I log in, and get the same set up window again! It keeps repeating, no matter what account I am on. This is terrible because I have no access what so ever to my computer's files at all.

This is my history with the MAC this week.
1st Login issues with 10.4.x
Could not find my 10.4 DVD, So I went to Best Buy and picked up a copy of 10.5.
Installed it changed my password no issues.
WRONG.
Installed the new update now my keychains are broke, I've tried the fix all of them but cannot seem to get it back.
I was able to change my account login with out any issues but this keychain issue will not go away.
I've tried to modify it and change it was per the Support site under the KeyChain manager with the same result.
Does anyone really know how to fix this because it's starting to tick me off.
Someone better get a hold of Steve here before I go see Bill again.

Adhoc conferencing giving busy tone when using non-default region

Hi All,
This strange issue is occuring on call manager 9.1. When the default device pool is used on the phones they are able to adhoc conference each other. When a different device pool is used and a new region is created but has the same settings as the default region it is still giving the busy tone.
Is there a reason why this is happening?

Default inter-region Codec unless you changed it is G.729. Software conference bridge in CallManager doesn't support G.729 so a transcoder or hardware conference bridge must be used. Your other option would be to just change the max audio bit rate between the Default region and the new region to 64kbps.

Using non-default webfonts to build a site

Can I use/add my own webfonts to build a site?

Take a look at the following thread - http://forums.adobe.com/message/5682584.
Thanks,
Vinayak

Warning! DSPs1 in slot 0 are using non-default firmware from flash:

hi,
C2801-ADVIPSERVICESK9-M), Version 15.0(1)M9
PID: PVDM2-16
when I reload the router I get this message something about firmware for the dsps not sure what to do about it.
RTR#sh voice dsp
edsp 0001 01 g729r8 p 0.1 IDLE 50/0/11.1
edsp 0002 02 g729r8 p 0.1 IDLE 50/0/11.2
edsp 0003 01 g729r8 p 0.1 IDLE 50/0/12.1
edsp 0004 02 g729r8 p 0.1 IDLE 50/0/12.2
edsp 0005 01 g729r8 p 0.1 IDLE 50/0/13.1
edsp 0006 02 g729r8 p 0.1 IDLE 50/0/13.2
edsp 0007 01 g729r8 p 0.1 IDLE 50/0/75.1
edsp 0008 01 g729r8 p 0.1 IDLE 50/0/76.1
----------------------------FLEX VOICE CARD 0 -----------------------
                           *DSP VOICE CHANNELS*
CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
LEGEND     : (bad)bad    (shut)shutdown (dpend)download pending
DSP    DSP                 DSPWARE CURR BOOT                         PAK   TX/RX
TYPE   NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
====== === == ========= ========== ===== ======= === == ========= == ==== ============
                           *DSP SIGNALING CHANNELS*
DSP    DSP                 DSPWARE CURR BOOT                         PAK   TX/RX
TYPE   NUM CH CODEC        VERSION STATE STATE   RST AI VOICEPORT TS ABRT PACK COUNT
====== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 {flex}       26.3.12 alloc idle      0 0 0/0/0     02    0         37/0
C5510 001 02 {flex}       26.3.12 alloc idle      0 0 0/0/1     06    0         37/0
C5510 001 03 {flex}       26.3.12 alloc idle      0 0 0/0/2     10    0         37/0
C5510 001 04 {flex}       26.3.12 alloc idle      0 0 0/0/3     14    0         37/0
------------------------END OF FLEX VOICE CARD 0 ----------------------------
it all seems fine to me but I don't understand why the router is giving that message and if I should do something about it.
this is happening because I updated the IOS to the above version.
I thought I had nothing to do to update the dsp firmware that it was integrated in the ios.
any thoughts?
thanks.

Hi,
I read some earlier discussions and referred the DOC but could not find anything concrete and the compatible DSP firmware version with your running IOS.
http://www.cisco.com/c/en/us/support/docs/voice/voice-quality/109469-dspware-c5510dsp.html
Also, some discussions say opening a TAC case to get the desired rbf file and uploading the same in flash of router.You can try the same.
regds,
aman

SSRS 2012 MP (Native) - Bug with non-default port on SSRS DB, Does not discover

We have test changing SSRS DB instance to default port 1433 and discovery is immediate in SSRS MP. When using non-default port, discovery fails, SSRS instance role is never identified.
Our SSRS is separated into app and db tires across two servers. Have tried creating sql network aliases, but this does not work either.
In our environment, we use non-default port for our SQL DB instances. how do we get SSRS to discover.
Thanks in advance,
Rois Cordova

The Monitoring Pack for Microsoft SQL Server 2012 Reporting Services automatically discovers instances of SSRS 2012 by reading registry.
When the Monitoring Pack for Microsoft SQL Server 2012 Reporting Services is imported for the first time, it creates three new Run As profiles:
• Microsoft SQL Server 2012 Reporting Services Discovery Run As Profile
• Microsoft SQL Server 2012 Reporting Services Monitoring Run As Profile
• Microsoft SQL Server 2012 Reporting Services SCOM SDK Discovery Run As Profile
By default, all discoveries, monitors and rules defined in the SQL Server 2012 Reporting Services management pack use accounts defined in the “Default Action Account”
Run As profile. If the default action account for a given system does not have the necessary permissions to discover or monitor the instance of SQL Server 2012 Reporting Services, then those systems can be bound to more specific credentials in the
“Microsoft SQL Server 2012 Reporting Services …” Run As profiles, which do have access.
It s recommend that you should check the default action account permission.
Roger

IdM doesn't support non-default port on mysql 4.1 as repository??

Hi
IdM doesn't support non-default port on mysql 4.1 as repository??
IdM version is 6.0.
I setup mysql 4.1 using non-default port 3307.
(default port is 3306)
During setup wizard,
the URL [jdbc:mysql://localhost:3307/waveset] doesn't work.
I am getting following error.
com.waveset.util.InternalError:
==> com.waveset.util.ConfigurationError:
==> com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
Of cource,
the URL [jdbc:mysql://localhost/waveset] works well
when I setup mysql using default port.

Hi,
it does work with non standard ports but whatever port you specify it will always try to connect to the default port before actually changing the repo setting.
Therefore use the switches -n -o $WSHOME/WEB-INF/ServerRepository.xml to write the new configuration without performing the broken checks.
Regards,
Patrick

System uses non-default language after log in

Similar Messages

Maybe you are looking for